NEW Titan II A & B Distribution Boards

A Type Board Specification: Powder Coated Epoxy Resin Finish RAL 7035 Designed and built in the UK to BS EN 60439 Maximum busbar rating 125A Degree of protection IP3X to BS EN 60529 Blank gland plates for ease of installation Removable hinged doors with slotted lock which can easily be replaced on site with a door lock Key hole slots for ease of fixing Maximum terminal capacity of Earth bar 25mm 2 Maximum terminal capacity of Neutral bar 25mm 2 Incomer can be up-rated at any-time in the future* Wide choice if incomers available Lugs, RCDs, Isolators and mcbs. Maximum rating 125A Contactors, timers etc can be fitted along side mcbs. MAIS12 12 Way SP&N MCB Board c/w Double Pole 125A Incomer Features Benefits Solid Sides Allow glanding in the sides Removable door Reduced installation time Removable Plain Gland Plates Ability to gland cable where you want to Full length Earth & Neutral Bars RCBOs can be fitted any where in the board Factory fitted incomer, no extra cost Saves time on site, no parts to loose Full length DIN Rail Contactors, timers etc. can be fitted inside the board Split load and 17th edition boards Full compliance to 17th edition wiring regulations available Fully metered Lighting and Power Full compliance with Part L2 boards available. Meter packs available For compliance with Part L2 Matching DIN rail enclosures House Command and Control equipment Removable pan assembly Ease of mounting/wiring MAIS12 MAIS26 12 way mcb board c/w 125A DP Isolator 26 way mcb board c/w 125A DP Isolator

Modular Enclosures MA14 MA28 14 way modular enclosure c/w full length DIN Rail, earth and neutral bars. 28 way modular enclosure c/w full length DIN Rail, earth and neutral bars. Metering Options MA010K MA220K MA222K 10 way mcb board c/w 125A DP Isolator and KWH Meter Twin metered board 10 & 10 single pole ways two DP 100A isolators. Twin metered board 10 & 12 single pole ways c/w one 100A isolator. MAIS12 MA28 MA220K 12 Way SP&N MCB Board 28 way modular enclosure Twin metered board 10&10 c/w Double Pole 125A Incomer c/w DIN Rail earth & nuetral bars single pole ways two isolators Dimensions MAIS12, MA14 & MA010K MAIS26, MA28, MA220K &MA222K

B Type Boards Specification: Powder Coated Epoxy Resin Finish RAL 7035 Designed and built in the UK to BS EN 60439 250A fully rated busbar Voltage rating 400/415v AC Degree of protection IP3X to BE EN 60529 Blank gland plates for ease of installation Removable hinged doors with slotted lock which can easily be replaced on site with a door lock Key hole slots for ease of fixing Incomer can be up-rated at any-time in the future* Incomers of 160A and above are supplied with cable extension box as standard. Full length earth and neutral bars Half DIN rail to ensure alignment of outgoing devices Removable raised pan assembly to allow cables to pass underneath A choice of incomers, Isolators up to 250A, RCDs up to 100A, MCCBs up to 250A and RCBOs up to 250A. Maximum capacity of earth & neutral bars 25mm 2 Accepts all Protek s 10KA mcbs B,C or D curves Accepts Protek s 6A to 63A Single module RCBOs and Protek s 6A to 40A 10KA Space Saver RCBOs 18 Module DIN rail allows contactors, timers etc to be fitted in board with suitable cover plate TP8MS3 8 Way TP&N MCB Board c/w 100A TP Incomer Features Benefits Solid Sides Allow glanding in the sides Removable door Reduced installation time Removable Hinged Door Removable Plain Gland Plates Ability to gland cable where you want to Pre-cut gland plates To allow direct connecting of trunking to boards Full length Earth & Neutral Bars RCBOs can be fitted any where in the board Factory fitted incomer (optional) Saves time on site, no parts to loose Integral 18 module DIN Rail Contactors, timers etc. can be fitted inside the board Lighting and Power Boards available. Compliance with part L2 of building regulations available Metering packs available Compliance with part L2 of building regulations Split load boards available Where RCDs are required on secondary side of the Board Modular System Boards can be connected side by side or top to bottom RCBO Incomers For TT system

NEW Titan II A & B Distribution Boards Incomer Arrangements 3/4 Pole Isolator 100A to 125A 4 Pole RCD 3/4 Pole 63A to 160A MCCB 3/4 Pole MCB 3/4 Pole 160A to 250A Isolator 3/4 Pole 200A to 250A MCCB

MCB Board Less Incomer TP4 TP6 TP8 TP12 TP16 TP24 B Type 250A Busbars 4 TP Ways B Type 250A Busbars 6 TP Ways B Type 250A Busbars 8 TP Ways B Type 250A Busbars 12 TP Ways B Type 250A Busbars 16 TP Ways B Type 250A Busbars 24 TP Ways Isolator Incomer Kit TP&N MS363K MS3100K MS3125K MS3160K MS3200K MS3250K 63A TP Incoming kit c/w isolator and connectors 100A TP Incoming kit c/w isolator and connectors 125A TP Incoming kit c/w isolator and connectors 160A TP Incoming kit c/w isolator and connectors & *spreader box 200A TP Incoming kit c/w isolator and connectors & *spreader box 250A TP Incoming kit c/w isolator and connectors & *spreader box Isolator Incomer Kit Four Pole MS463K MS4100K MS4125K MS4160K MS4200K MS4250K 63A 4P Incoming kit c/w isolator and connectors 100A 4P Incoming kit c/w isolator and connectors 125A 4P Incoming kit c/w isolator and connectors 160A 4P Incoming kit c/w isolator and connectors & *spreader box 200A 4P Incoming kit c/w isolator and connectors & *spreader box 250A 4P Incoming kit c/w isolator and connectors & *spreader box 80A Four Pole RCD Incomer Kit R80/30K R80/100K R80/300K R80/500K 80A 30mA 4P RCD Incoming kit c/w RCD, cover plate and connectors 80A 100mA 4P RCD Incoming kit c/w RCD, cover plate and connectors 80A 300mA 4P RCD Incoming kit c/w RCD, cover plate and connectors 80A 500mA 4P RCD Incoming kit c/w RCD, cover plate and connectors * Cable spreader box SB225 is supplied as standard on all incomers of 160A and above.

100A Four Pole RCD Incomer Kit R100/30K R100/100K R100/300K R100/500K 100A 30mA 4P RCD Incoming kit c/w RCD, cover plate and connectors 100A 100mA 4P RCD Incoming kit c/w RCD, cover plate and connectors 100A 300mA 4P RCD Incoming kit c/w RCD, cover plate and connectors 100A 500mA 4P RCD Incoming kit c/w RCD, cover plate and connectors 100A Four Pole Time Delay Incomer Kit R100/30TDK R100/100TDK R100/300TDK R100/500TDK 100A 30mA 4P Time Delay RCD Incoming kit c/w RCD, cover plate and connector 100A 100mA 4P Time Delay RCD Incoming kit c/w RCD, cover plate and connector 100A 300mA 4P Time Delay RCD Incoming kit c/w RCD, cover plate and connector 100A 500mA 4P Time Delay RCD Incoming kit c/w RCD, cover plate and connector MCCB Incomer Kit MO3100K MO3125K MO3160K MO3200K MO3250K 100A TP MCCB Incoming Kit c/w MCCB, cover plate, connectors and *spreader box 125A TP MCCB Incoming Kit c/w MCCB, cover plate, connectors and *spreader box 160A TP MCCB Incoming Kit c/w MCCB, cover plate, connectors and *spreader box 250A TP MCCB Incoming Kit c/w MCCB, cover plate, connectors and *spreader box 250A TP MCCB Incoming Kit c/w MCCB, cover plate, connectors and *spreader box Four Pole RCBO Incomer Kit MCKR125 MCKR160 MCKR250 125A Four Pole RCBOs Incoming Kit c/w RCBOs, cover plate, connectors and *spreader box 160A Four Pole RCBOs Incoming Kit c/w RCBOs, cover plate, connectors and *spreader box 250A Four Pole RCBOs Incoming Kit c/w RCBOs, cover plate, connectors and *spreader box * Cable spreader box SB225 is supplied as standard on all incomers of 160A and above.

Three Pole MCB Incomer Kit MB363K MB380K MB3100K MB3125K 63A Three Pole MCB Incoming Kit c/w MCB, cover plate and connectors 80A Three Pole MCB Incoming Kit c/w MCB, cover plate and connectors 100A Three Pole MCB Incoming Kit c/w MCB, cover plate and connectors 125A Three Pole MCB Incoming Kit c/w MCB, cover plate and connectors Four Pole MCB Incomer Kit MB464K MB480K MB4100K MB4125K 63A Four Pole MCB Incoming Kit c/w MCB, cover plate and connectors 80A Four Pole MCB Incoming Kit c/w MCB, cover plate and connectors 100A Four Pole MCB Incoming Kit c/w MCB, cover plate and connectors 125A Four Pole MCB Incoming Kit c/w MCB, cover plate and connectors Direct Incomer Kit TPM00 Blank plate Cable Spreader Boxes SB400 SB350 SB225 Cable box 400x 410x 110mm for 250A mcb boards Cable box 350x 410x 110mm for 250A mcb boards Cable box 225x 410x 110mm for 250A mcb boards Modular Enclosures to house DIN Rail equipment AB14/1PH AB28 14 Mod din rail enclosure to fit above or below mcb board 28 Mod din rail enclosure to fit above or below mcb board

Accessories SPCK250 Single Phase Conversion Kit for three phase mcb boards 1336-03-2 Barrel lock with keys for three phase boards N-DIS E-DIS NSA1 Neutral disconnector, three phase mcb boards Earth disconnector, three phase mcb boards MCB Locking device (Less padlock) Meter Pack Options MA250KWHP MA250KWHM MA100KWHP Meter kit for three phase board c/w pulsed output Meter kit for three phase board c/w Modbus output 100A Direct Connecting KWH Meter Pack Pulsed Output MA100KWHP Direct connecting Meter Pack MA250KWHP Meter Pack Dual Meter Pack M2-250KWHP M2-250KWHM Dual multi-function meter pack for three phase boards c/w Isolator, two multifunction meters, control fuses, CTs pre-wired ready to connect up. Pulsed O/P. Dual multi-function meter pack for three phase boards c/w Isolator, two multifunction meters, control fuses, CTs pre-wired ready to connect up. Modbus O/P. Incoming Meter Pack TPMK1P TPKM1M Multi-function KWH meter kit c/w CTs, KWH Meter, control fuses, wiring loom, front plate and instructions. (Pulsed Output) Multi-function KWH meter kit c/w CTs, KWH Meter, control fuses, wiring loom, front plate and instructions. (Modbus Output) N.B When ordering a meter pack or kit please ensure you add a P if pulsed output is required or M if modbus is required as mistakes are costly to rectify.

Split Load Board SLK125/3 SLK125/4 Three 125A Link Units, Two open gland plates and cables Three Pole Three 125A Link Units, Two open gland plates and cables Four Pole Trunking Glanding Plate & Jointing Kit C12804 TPJKIT Glanding plate with slot cut so as to accept 4 trunking. 2 No. C12804 for joining two boards or a board and spreader box together Dual Metered Board Choose size of boards required i.e. 8 & 12, pick a dual meter pack from above list. Decide if incoming isolators are required for each section and select from isolator section or opt for blank plates TPM00, add two jointing kits and you have a dual metered split load board. Example:- Customer requires an 8 way lighting board and a 12 way power board with 125A incomer both metered with modbus output for a BMS system. 8 Way MCB Board 1 No. TP8 12 Way MCB Board 1 No. TP12 No individual isolation required Two blank plates required 2 No. TPM00 Two jointing kits are required one between. the boards the other between meter pack 2 No TPJKIT. One dual meter pack with modbus 1 No. M2-250KWHM Outgoing Kits (80A or 100A SP/TP MCBs as outgoers) TPK1M80C TPK1M80D TPK1M100C TPK1M100D TPK3M80C TPK3M80D TPK3M100C TPK3M100D 80A C Curve SP mcb. Front plate, links and instructions. 80A D Curve SP mcb. Front plate, links and instructions. 100A C Curve SP mcb. Front plate, links and instructions. 100A D Curve SP mcb. Front plate, links and instructions. 80A C Curve TP mcb. Front plate, links and instructions. 80A D Curve TP mcb. Front plate, links and instructions. 100A C Curve TP mcb. Front plate, links and instructions. 100A D Curve TP mcb. Front plate, links and instructions.

RCBO Outgoing Kits (20A to 63A) TPRC20/30K TPRD20/30K TPRC25/30K TPRD25/30K TPRC32/30K TPRD32/30K TPRC40/30K TPRD40/30K TPRC50/30K TPRD50/30K TPRC63/30K TPRD63/30K Four pole RCBO Kit. 20A TP C Curve MCB, 40A four pole 30mA RCD, Wiring loom, Four pole RCBO Kit. 20A TP D Curve MCB, 40A four pole 30mA RCD, Wiring loom, Four pole RCBO Kit. 25A TP C Curve MCB, 40A four pole 30mA RCD, Wiring loom, Four pole RCBO Kit. 25A TP D Curve MCB, 40A four pole 30mA RCD, Wiring loom, Four pole RCBO Kit. 32A TP C Curve MCB, 40A four pole 30mA RCD, Wiring loom, Four pole RCBO Kit. 32A TP D Curve MCB, 40A four pole 30mA RCD, Wiring loom, Four pole RCBO Kit. 40A TP C Curve MCB, 40A four pole 30mA RCD, Wiring loom, Four pole RCBO Kit. 40A TP D Curve MCB, 40A four pole 30mA RCD, Wiring loom, Four pole RCBO Kit. 50A TP C Curve MCB, 63A four pole 30mA RCD, Wiring loom, Four pole RCBO Kit. 50A TP D Curve MCB, 63A four pole 30mA RCD, Wiring loom, Four pole RCBO Kit. 63A TP C Curve MCB, 63A four pole 30mA RCD, Wiring loom, Four pole RCBO Kit. 63A TP D Curve MCB, 63A four pole 30mA RCD, Wiring loom, Front Plates TPM44 TPM54 TPM55 TPM555 Front plate to accept four pole isolator up to 125A and a KWH Meter Front plate to accept four pole isolator up to 250A and a KWH Meter Front plate to accept incomer up to 250A and one 80/100A mcb outgoer SP/DP or TP Front plate to accept incomer up to 250A and two 80/100A mcb outgoers SP/DP or TP

3 Phase Board Dimensions W Accessory Box (AB14/AB28) 3 Phase Board Incomer Enclosure/ Cable Spreader Box (SB400) H1 H H2 Code No. of Ways Height Width Depth TP4 4 TP Ways 470 mm 410 mm 130 mm TP6 6 TP Ways 525 mm 410 mm 130 mm TP8 8 TP Ways 580 mm 410 mm 130 mm TP12 12 TP Ways 690 mm 410 mm 130 mm TP16 16 TP Ways 795 mm 410 mm 130 mm TP24 24 TP Ways 1010 mm 410 mm 130 mm SB400 400 mm 410 mm 130 mm AB14 14 SP Ways 230 mm 410 mm 130 mm AB28 28 SP Ways 350 mm 410 mm 130 mm phone fax email 01543 46 75 75 01543 46 23 70 orders@protekuk.co. TIIPF002