Issue Date: May 2018 Fixture/Location Ref: Project Ref: ProSpex Gimbal Midi Gimbal Midi Twin Fixture The ProSpex fully adjustable trimmed gimbal fixtures, ideal for high end retail or hospitality applications where flexibility is required. Also available in single and other multiple permutations, up to three modules as standard, that allows uniformity in the ceiling of multiple heads in one recessed housing. Minimal ceiling trim for a clean ceiling line. The range utilises many light sources including Xicato LED modules. XTM19/XTM9 A220-XI-TR ProSpex Gimbal Midi Twin Trim for Xicato Modules A220-XI-TL ProSpex Gimbal Midi Twin Trimless for Xicato Modules Product Description aterpillar brackets fitted for commercial installation Minimal ceiling trim Die cast double ring gimbal heads Integral compartment for electrical hardware Electrical compartment accessible through ceiling aperture Maximum tilt 35 in certain directions Anti glare snoots as standard Tapered or straight snoot options Each head accepts 2 media accessories Front loading lenses and louvres and combinations as standard Page 01
Xicato Module & Housing compatibility table: Please use the following table to: 1) Specify the lumen output & module type for the module order code 2) Specify required drive current 3) Specify the correct size housing Housing Size LED Type 700 Lumen Module 1300 Lumen Module 2000 Lumen Module 3000 Lumen Module 8.50 XTM 1300lm 11.7w max 700mA XTA 965lm 10.9w max 500mA XTV83 1300lm 11.7w max 700mA XTV95 965lm 10.9w max 500mA XTB95 965lm 10.9w max 500mA XTM9 700lm 7.8w max 700mA 965lm 10.9w max 500mA XTA9 700lm 9.7w max 700mA 700lm 10.9w max 500mA XTV983 700lm 7.8w max 700mA 965lm 10.9w max 500mA XTV995 700lm 9.7w max 700mA 700lm 10.9w max 500mA 11.25 XTM 1300lm 11.7w max 700mA 2000lm 19.5w max 700mA 2100lm 18.9w max 700mA XTA 1300lm 15.6w max 700mA 1400lm 17.0w max 700mA 2140lm 22.3w max 700mA XTV83 1300lm 11.7w max 700mA 2000lm 19.5w max 700mA 2100lm 18.9w max 700mA XTV95 1300lm 15.6w max 700mA 1400lm 17.0w max 700mA 2140lm 22.3w max 700mA XTB95 1300lm 15.6w max 700mA 1400lm 17.0w max 700mA XTM9 700lm 7.8w max 700mA 1300lm 15.6w max 700mA 1400lm 19.5w max 700mA XTA9 700lm 9.7w max 700mA 1300lm 24.3w max 1050mA 1110lm 19.5w max 700mA XTV983 700lm 7.8w max 700mA 1300lm 15.6w max 700mA 1400lm 19.5w max 700mA XTV995 700lm 9.7w max 700mA 1300lm 24.3w max 1050mA 1110lm 19.5w max 700mA Page 02
XTM Module Order ode: LED XTM9 XTA9 XTV983 XTV995 XTM XTA XTV83 XTV95 XTB95 Lumen Output 700 700lm 1300 1300lm (Refer to table below to specify module lumen output) 2000 2000lm 3000 3000lm Drive 350 350mA 500 500mA (Refer to table below to specify drive current) 700 700mA 1050 1050mA Beam 10 10 (For 9mm Modules) 23 23 (For 19mm Modules) 42 42 (For 19mm Modules) 57 57 (For 19mm Modules) T (Suitable for all) 27 2700K 30 3000K 35 3500K 40 4000K Fixture/Housing Order ode: A220-XI Fixture A220-XI Flange TR TL Gimbal Finish Housing Finish Installaion Kit Finish ProSpex Gimbal Midi Twin for Xicato Modules Flange Flangeless Housing Size 8.50 8.50 Housing 11.25 11.25 Housing eiling Thickness 12 1/2 58 5/8 75 3/4 ustom Protocol S Switched A 0-10V P TRIA/Phase L Lutron 2-Wire Page 03
Installation Instructions for Gimbal Midi Twin Flange For Insulated and Non-Insulated eiling type installations! MAINS POWER TO BE SWITHED OFF DURING INSTALLATION. 1. Fixing of housing 2. Plasterboard installation utout (): 10.63 x 5.27 (270 x 134mm) 3. Finish ceiling face 4. Paint and allow to dry fully 5. Dropdown of power supply 6. Fixture wiring connection 7. Power supply re-installation 8. Align fixture and Install 9. Finished Installation 1. Adjust tilt Page 04
Installation Instructions for Gimbal Midi Twin Flangeless For Insulated and Non-Insulated eiling type installations! MAINS POWER TO BE SWITHED OFF DURING INSTALLATION. 1. Fixing of housing 2. Plasterboard installation utout (): 10.98 x 5.63 (279 x 143mm) 3. Trimless mud in kit installtion 4. Mud in and allow to dry fully 5. Paint and allow to dry fully 6. Dropdown of power supply 7. Fixture wiring connection 8. Power supply re-installation 9. Align fixture with trimless kit and Install 10. Finished Installation 1. Adjust tilt Page 05