P r o d u c t I n f o r m at i o n LUT8 Luminescence Sensors For universal use with easy adjustment
LUT8 Luminescence sensors For universal use with easy adjustment Product description The strength of the LUT8 is its straightforward operating concept. The sensitivity of the LUT8, and the switching reliability, can easily be adapted to the mark to be detected with the help of the At a glance Tough metal housing Simple sensitivity adjustment in 8 stages Bar graph display provides information about the luminescence intensity Sensing distances selectable through interchangeable lenses Your benefits An 8-step rotary switch easily adjusts to accurately determine the switching output position for different materials Bar graph display provides continual process control through easy visualization of the luminescence intensity 8-position rotary switch. An additional advantage is the bar graph display which visualizes the luminescence intensity of the mark and that of the background. Additional optical filters suppress background luminescence Fiber-optic cable connection (with 20 mm lens) Switching and analog output Filters ensure that background luminescence is reliably suppressed, ensuring greater process reliability Interchangeable lenses for different sensing distances provide flexibility Additional information Detailed technical data.............3 Ordering information...............4 Dimensional drawing..............4 Adjustments.....................4 Connection type and diagram.......5 Sensing distance..................5 Light spot size....................5 Recommended accessories.........6 Setting the switching threshold......9 2 R E G I S T R AT I O N S E N S O R S S I C K 8014028/2010-12-15
Luminescence sensors LUT8 Detailed technical data Features Dimensions (L x W x H) 1) 2) Light source UV-LED Light emission Light spot direction Adjustment Switching function 80 mm x 30.4 mm x 53 mm Long side Vertical Manual (rotary switch) Light switching 1) Average service life 100,000 h at T a = +25 C. 2) Wave length: 375 nm. Mechanics/electronics Supply voltage V 1) S Ripple 2) Power consumption 3) Switching frequency 4) DC 12 V... 30 V < 5 V PP < 100 ma 2.5 khz Response time 5) 200 µs Switching output voltage Switching output Analog output Q A Output current I max. Connection type Protection class 6) PNP: HIGH = V S 3 V / LOW = apporox. 0 V NPN: HIGH = approx. V S / LOW 2 V PNP/NPN 0 ma... 13 ma 100 ma Connector M12, 5-pin II Circuit protection V S connections reverse-polarity protected Output Q short-circuit protected Interference suppression Enclosure rating IP 67 Weight Approx. 400 g Housing material Die-cast zinc 1) Limit values: operation in short-circuit protected network max. 8 A. 2) May not exceed or fall short of V S tolerances. 3) Without load. 4) With light/dark ratio 1:1. 5) Signal transit time with resistive load. 6) Reference voltage 50 V DC. Ambient data Ambient temperature Operation: 10 C... +55 C Storage: 25 C... +75 C Shock load According to IEC 60068 8014028/2010-12-15 R E G I S T R AT I O N S E N S O R S S I C K 3
LUT8 Luminescence sensors Ordering information Sensing Operating range Light spot size Receiving filters Receiving range Model name Part no. distance 1) 10 mm 0 mm... 20 mm 2 mm x 6 mm KV 418 (standard) 450 nm... 750 nm LUT8U-11101 1046711 20 mm 10 mm... 40 mm 3 mm x 9 mm KV 418 (standard) 450 nm... 750 nm LUT8U-11201 1047042 50 mm 20 mm... 70 mm Ø 6 mm KV 418 (standard) 450 nm... 750 nm LUT8U-11701 1047048 5 mm x 15 mm KV 418 (standard) 450 nm... 750 nm LUT8U-11301 1047043 OG 570 570 nm... 750 nm LUT8U-11311 1047045 RG 610 610 nm... 750 nm LUT8U-11321 1047046 RG 665 670 nm... 750 nm LUT8U-11331 1047047 90 mm 30 mm... 110 mm 12 mm x 12 mm KV 418 (standard) 450 nm... 750 nm LUT8U-11401 1047044 1) From front edge of lens. Dimensional drawing 9 (.35) 56 (2.20) 28 (1.10) Sensing distance 10 mm Sensing distance 20/50 mm Sensing distance 90 mm 21 (.83) M5 2 30.4 (1.20) 26 (1.02) 26 (1.02) 40 (1.57) 53 (2.09) Ø 32 (1.26) Ø 33.2 (1.31) 4 1 3 3 (0.12) 4.1 (0.16) 40.7 (1.60) M5 17 (.67) 13 (.51) 28 (1.10) 52 (2.05) 80 (3.15) 3 (.19) 5 Adjustments 7 Q Sensitivity low high + 6 8 1 M5 threaded mounting hole, 5.5 mm deep 2 Light spot direction 3 Center of optical axis 4 Connector M12 (rotatable up to 90 ) 5 See dimensional drawing for lens 6 Rotary selection switch 7 Function signal indicator (yellow), switching output 8 Bar graph (green), Power on left LED 4 R E G I S T R AT I O N S E N S O R S S I C K 8014028/2010-12-15
Luminescence sensors LUT8 Connection type and diagram Connector M12, 5-pin Sensing distance 300 250 200 Scan material: SICK Luminescence reference 100 % 150 brn blk blu wht gra 1 L+ 4 Q PNP 3 M 2 Q NPN 5 Q A Relative sensitivity in % 100 50 0 Switching threshold 0 40 80 (1.57) (3.15) 120 (4.72) 160 (6.30) 200 (7.87) 240 (9.45) Sensing distance in mm (inch) 1 Sensing distance 10 mm 2 Sensing distance 20 mm 3 Sensing distance 50 mm 4 Sensing distance 90 mm Light spot size Sensing distance 10 mm Sensing distance 20 mm Sensing distance 50 mm Sensing distance 90 mm 2 x 6 (0.1 x 0.2) 5 x 10 4 x 8 (0.2 x 0.4) (0.2 x 0.3) 3 x 9 (0.1 x 0.4) 3 x 10 8 x 14 (0.1 x 0.4) (0.3 x 0.6) 5 x 15 (0.2 x 0.6) 6 x 16 8 x 20 (0.2 x 0.6) (0.3 x 0.8) 12 x 12 (0.5 x 0.5) 6 x 15 13 x 16 (0.2 x 0.6) (0.5 x 0.6) Sensor Sensor Sensor Sensor 5 10 15 10 20 30 40 50 60 70 (0.2) (0.4) (0.6) (0.4) (0.8) (1.2) (1.6) (2.0) (2.4) (2.8) Distance Distance Distance Distance 90 (3.5) 110 (4.3) 8014028/2010-12-15 R E G I S T R AT I O N S E N S O R S S I C K 5
LUT8 Luminescence sensors Recommended accessories Plug connectors and cables Connector M12, 5-pin Connector type Enclosure rating Flying leads Sheath material Cable length Model name Part no. Female connector IP 67 2 m DOL-1205-G02M 6008899 Straight PVC 5 m DOL-1205-G05M 6009868 10 m DOL-1205-G10M 6010544 2 m DOL-1205-W02M 6008900 Angled PVC 5 m DOL-1205-W05M 6009869 10 m DOL-1205-W10M 6010542 Straight DOS-1205-G 6009719 Angled DOS-1205-W 6009720 Terminal and alignment brackets Mounting system type Description Material Model name Part no. Universal bar clamps BEF-KHS-G01 Plate G for universal bar clamp Steel, zinc coated BEF-KHS-G01 2022464 Plate K for universal bar clamp Steel, zinc coated BEF-KHS-K01 2022718 Universal bar clamp Die-cast zinc BEF-KHS-KH1 2022726 Mounting rod straight Steel, zinc coated BEF-MS12G-A 4056054 BEF-MS12G-B 4056055 Mounting rod L-shaped Steel, zinc coated BEF-MS12L-A 4056052 BEF-MS12L-B 4056053 BEF-KHS-K01 50.5 (1.99) 61 (2.40) 47 (1.85) 101 (3.98) BEF-KHS-KH1 Locking screw Ø 28 (1.10) Ø 12 20 (0.47 0.79) 6 R E G I S T R AT I O N S E N S O R S S I C K 8014028/2010-12-15
Luminescence sensors LUT8 BEF-MS12G-A (size A = 200 mm) BEF-MS12G-B (size A = 300 mm) Ø 12 (0.47) 1.5 (0.06) x 45 1.5 (0.06) x 45 A BEF-MS12L-A (size A/B = 150 mm) BEF-MS12L-B (size A/B = 250 mm) B 1.5 (0.06) x 45 Ø 12 (0.47) 1.5 (0.06) x 45 A 90 R12 (0.47) Principle of function terminal and alignment brackets 42.8 (16.85) Z 101 (3.98) 61 (2.40) K Locking screw Ø 28 (1.10) Ø 12 20 (0.47 0.79) 47 (1.85) 50.5 (1.99) G 72 (2.83) 44.5 (1.75) D 45 (1.77) 63.5 (2.5) L Lenses (also for exchange) Sensing distance Model name Part no. 10 mm OBJ-LUT3-10 2016348 20 mm OBJ-LUT3-20 2016349 50 mm OBJ-LUT3-50 2016350 OBJ-LUT3-10 OBJ-LUT3-20 OBJ-LUT3-50 26 (1.02) 26 (1.02) 4.1 (0.16) 3 (0.12) 8014028/2010-12-15 R E G I S T R AT I O N S E N S O R S S I C K 7
LUT8 Luminescence sensors Fiber-optic cables Description Liquid fiber-optic 1) Only to mount with 20 mm lens. Length, fiber-optic cable Min. bend radius, fiber-optic cable Model name 1) Part no. 1,000 mm 40 mm LLUV8-1000 2017099 500 mm 40 mm LLUV8-500 2017098 LLUV8-1000 LLUV8-500 28 (1.1) 43.3 (1.7) 2.6 (0.1) 7.7 (0.3) 18 (0.71) ø4 (0.16) ø8 (0.31) 1 Adapter 2 Fiber-optic cable LLVS8, min. bend radius R min = 40 mm 3 Length, fiber-optic cable Others Description Model name Part no. Crayon, red fluorescence LUM-FT 1004460 Writing chalk, red fluorescence LUM-KLK 1002959 Luminescence reference German/English 8008840 8 R E G I S T R AT I O N S E N S O R S S I C K 8014028/2010-12-15
Luminescence sensors LUT8 Setting the switching threshold via rotary switch (8 stages) 1. Position mark 2. Position background Sensitivity setting Sensitivity low high Q Sensitivity low high Q Signal strength Mark signal + + Switching threshold Turn Sensitivity rotary switch clockwise until yellow LED illuminates. If yellow LED illuminates, turn Sensitivity rotary switch counter-clockwise until the yellow LED just goes out. Background signal t Note The bar graph display shows the luminescence intensity (regardless of switching threshold setting). Adjustments are intendend for luminescence background suppression. 8014028/2010-12-15 R E G I S T R AT I O N S E N S O R S S I C K 9
8014028/2010-12-15 SS WB USmod int-us35 Worldwide presence with subsidiaries in the following countries: Australia Belgium/Luxembourg Brasil Ceská Republika China Danmark Deutschland España France Great Britain India Israel Italia Japan Nederland Norge Österreich Polska Republic of Korea Republika Slovenija România Russia Schweiz Singapore Suomi Sverige Taiwan Türkiye United Arab Emirates USA/Canada/México Please find detailed addresses and additional representatives and agencies in all major industrial nations at www.sick.com Handed over by: Our business segment expertise Factory automation With its intelligent sensors, safety systems, and automatic identification applications, SICK provides comprehensive solutions for factory automation. Logistics automation Sensors made by SICK form the basis for automating material flows and the optimization of sorting and warehousing processes. Process automation Optimized system solutions from SICK ensure efficient acquisition of environmental and process data in many industrial processes. Non-contact detecting, counting, classifying, and positioning of any type of object Accident protection and personal safety using sensors, as well as safety software and services Automated identification with barcode and RFID reading devices for the purpose of sorting and target control in industrial material flow Detecting volume, position, and contours of objects and surroundings with laser measurement systems Precise measurement of gases, liquids and dust concentrations for continuous monitoring of emissions and the acquisition of process data in production processes Gas flow measurements with maximum accuracy thanks to compact gas meters SICK AG Waldkirch Germany www.sick.com