CAMERA CM-AH Pick-up device EIA CCIR View of angle Minimum illumination Input Voltage Operating Temperature Camera Weight Dimension /" 50,000 pixels B/W CCD /" 90,000 pixels B/W CCD 0 degree diagonal 0.0LUX DC V/00mA Max -0 to + 55 (+ to + ) 0.Kg(0.88lbs) including bracket 70(W) X (H) X 57(D)mm.7(W) X.7(H) X.(D)inch REAR-VIEW SYSTEM 5 TFT LCD MONITOR & CAMERA INSTRUCTION MANUAL MODEL : RV-5/5AH Thank you for choosing this product. Please read this instruction manual carefully before operating this product. Accessories Camera Bracket Sun Visor Adhesive tape Machine screw(ass'y)(ph) Mx8 Machine screw(phw) Mx6 Tapping screw(th)x0 Spring washer(m) Spring washer(m) Insulation tape Extension cable Printed in Korea RECORD YOUR MODEL NUMBER (Now, while you can see it) The model and serial number of your MONITOR are located on the back of the cabinet. For your future convenience, we suggest that you record these numbers here : MODEL number : SERIAL number : 0
. Safety Rules Contents. Safety Rules. Before Use. Special Features of the product. Terms of part 5. Remote Control 6. Functions 7. Connections 8. Installation 9. Changing Remote Control Battery 0. Specifications 6 7 8 9 0 5 7 8 Please read the Safety Rules carefully before using this product. Following of the safety rules prevents users from any damage related with the misuse of this product. It is very important that users follow these safety rules. We state Caution and Warning to clarify any potential for damage associated with misuse of the product. Warning May cause bodily harm or even death if users ignore warnings in the safety rules. Caution May cause bodily harm or even death if users ignore cautions in the safety rules. Warning Do not About signs Place the product where it doesn t prevent the driver from driving. --- The driver s view of sight should not be blocked. Do not watch or operate the product while driving. --- This may cause a major accident. Do not place the product near the passenger-side airbag. --- Airbags may not operate properly or may cause personal damage and accident when accidentally opening. Do not get product wet and operate with wet hands. --- This may cause electric shock. Do not use in bathtub. Do not pull the plug with wet hands. ---This may cause electric shock. Do not use unapproved power voltage. ---This may cause fire or electric shock. Do not use unapproved Cigarette Lighter Adapter. --- This may cause fire,electric shock and/or malfunction. Do not damage or bend electric cord. Do not place heavy objects on electric cord. ---This may cause fire from electric sparks. Do not use damaged electric cord. --- This may cause fire and/or electric shock. Precautions Follow directions carefully Do not put pins or needles into the product or electric cord of product. --- If this happens, stop the product operation immediately. Continuous use may cause fire, electric shock and/or malfunction.
Do not place any containers with water or any small metal objects on top of the product or nearby it. --- Unplug the product when water or metal comes in contact with the product. Continuous use may cause fire, electric shock and/or malfunction. Stop using the product immediately when you drop it or damage the outside shell. --- Continuous use may cause fire, electric shock and/or malfunction. Be careful when thunder and lighting occurs. --- There is a danger of electric shock. Do not use non-specified double socket and extended car battery cord. --- This may cause excess heat and/or fire. Do not attempt to open, disassemble or repair the product by any person except an authorized service dealer. --- This may cause electric shock and/or malfunction. You should request an authorized service dealer for any inspection and repair of the product. Caution Do not put the product in a place where sudden temperature increase occurs such as the vehicle s dashboard. Do not place the product where high temperature and/or the direct ray of the sun occurs. --- This may cause fire, electric shock and/or malfunction. Do not put the product in an unstable place where the product may be exposed to shock and/or impact. --- The product may fall and be damaged. Do not place electric cord near a heating product. --- The cord surface may melt and cause fire and/or electric shock. Do not press or drop LCD panel. --- You should not give any shock on LCD panel because it may cause damage. Always clean the cigarette lighter socket before using product. --- Bad connection may cause fire. Clean electric socket area often. --- Dust in the area may cause fire. Keep electric cord properly positioned. --- An improperly positioned electric cord may cause fire or electric shock when metal material is in contact with the power source. Unplug the product and remove cords when moving. --- It may damage cords and cause fire and/or electric shock. The car engine should be running when you use the product in a car. ---Without the engine running, you may have excessive discharge of the car battery. Do not pull the cord line when you unplug it. ---Damaged cords may cause fire and/or electric shock. Hold the plug when you unplug the product. Put a battery in the remote control properly with +, - signs as directed in this manual. --- Improper use of batteries may cause fire and/or damage. Unplug the product when you don't use it for a long period of time. ---Insulation may cause electric shock, electric leak and/or fire. Unplug the product when you clean or care for it. ---Not unplugging product may cause electric shock. Do not watch Monitor for a long period of time. ---This may damage your eyesight. When you transport the product, remove all cords and do not give any shock. ---This may cause a malfunction. Do not place volatile materials such as insecticides on the product. The product should not come in contact with rubber or vinyl for a long period of time. ---The surface of the product may change and paint may peel off. If you find any strange occurrences or malfunction in the product or any foreign substance gets into the product, please contact the authorized retailer where you purchased the product. Do not use the product in the following locations. ---This may cause malfunction. In direct rays of the sun and near heating products High in humidity and with bad ventilation Dusty or oily locations Low temperatures Unstable environment 5
. Before Use. Special Features of the Product MONITOR CM-505 To safely use the product, please read the user s manual carefully before use. Connect all lines as directed in the product connection map in the manual. Do not touch the LCD panel. O Use the product at the temperature range of 0 C ~ 50 O C. Screen may be a little dark when the product is operated in low temperature areas. Screen will show normal luminosity after a few minutes. Do not disassemble and modify the product in any way. This may cause fire and/or electric shock. When you install the product in a car, do not set a volume level too loud for others to hear outside. When you install the product in a car and watch TV, the car engine should be running as there might occur excessive discharge of the car battery. Any liquid leaking into product may cause malfunction. Precautions (when you use the product in a car) The driver should not use the product while he/she is driving. Quality of pictures on screen may vary depending on the radio field strength in different locations. You should use video equipment where you experience weak radio field strength. Follow traffic laws when you use the Navigation Route System. Be cautious of humidity and shock when you use the product in a car. The product should not be placed on the dashboard or near engine Cover the product when exposed to direct rays of the sun for a long period of time. O O (You should keep the product at a temperature range of -5 C ~ 60 C.) Application of 8bit MICRO CONTROLLER Application of TFT LCD with high resolution and low reflection All functions are automatic (Remote function) All functions are displayed on screen (OSD function) PWM volume control Mode selection function One-touch dimmer Low energy consuming rate(max AT V) Audio mute function (remote control) Language Display Selection (ENGLISH-GERMAN-KOREAN-JAPANESE -ITALIAN -FRENCH- SPANISH) Headphone Jack Camera(Rear, Side View), A/V Selection Cable solution CAMERA CM-/AH Aluminum die-casting housing. The camera is designed for compact size and waterproof housing. Auto-lris makes the picture fine in any bright condition. The highest quality of CCD provides you with the best picture. Night vision using the CDS sensor. 6 7
. Terms of part 5. Remote Control 6 5 8 7 5 POWER Power ON/OFF Key MODE DIMMER CAM/CAM/AV selection function DYNAMIC/NORMAL/MILD/PICTURE USER selection function (POWER) Power ON (LED OFF) /OFF(LED ON) button MODE MUTE CAM/CAM/AV selection function For muting sound Returns to the previous sound level when you push again VR Controls Volume and changes MENU level (H/P) 5 REMOTE SENSOR WINDOW Headphone Jack Sensor for receiving signal from the remote control 5 AUTO PIC 6 RECALL Changes brightness and contrast level of the screen (User, Dynamic, Normal, Mild) Displays present status and volume level 7 PRO Moves and selects Menu 8 MENU Selects menu and changes function 8 9
6. Functions VR POWER ON/OFF KEY Press VR The monitor shows volume on the screen and volume is up. ON OFF Push POWER button to on the power (STAND BY state is OFF) Push POWER button again to off the power VOLUME 0 MODE Press VR The monitor shows volume on the screen and volume is down. VOLUME 0 It is a function to change video signal. The display is disappeared 6second later after setting. CAM Push MODE button CAM or CAM or AVappears on the screen and it is disappeared after 6 seconds. CAM CAM AV AUTO PIC AUTO PIC DYNAMIC, NORMAL, MILD, USER PICTURE USER CONTRAST, BRIGHTNESS, COLOR, TINT Press AUTO PIC to select DYNAMIC/ NORMAL/ MILD or PICTURE USER for the screen. PICTURE USER MUTE This function can be operated by the REMOTE CONTROL This function works to MUTE sound instantly. VOLUME LEVEL returns to its previous setting when button is pushed again. Starts from sound level when the VR button is pushed after using MUTE. PICTURE DYNAMIC NORMAL MILD USER RECALL DYNAMIC CONTRAST BRIGHTNESS COLOR TINT SELECT ADJUST 0 MUTE AV Press RECALL to check the AV MODE. VOLUME 0 MUTE VOLUME 0 0
MENU This button is for SETUP, PICTURE USER There are ways PICTURE USER MODE SETUP OTHER MODES SETUP. SETUP PICTURE USER Use MENU button to display SETUP MAIN MENU and SUB MENU Use PRO button to change MAIN MENU, changed color in pink when it is selected. SETUP PICTURE Use PRO button to select MAIN MENU and use VR button to change SUB MENU. SYSTEM LANGUAGE DISPLAY NOR/MIR PICTURE SELECT SETUP AUTO ENGLISH FULL NORMAL USER ADJUST PICTURE CONTRAST BRIGHTNESS COLOR TINT SELECT USER ADJUST 0 DISPLAY does correction and displays revised contents at the same time. 5 OSD sign disappears in 6 seconds after the end of use and all work is saved simultaneously. 6 POWER OFF KEY forces current mode to be released disregarding its position. ) PICTURE USER Select PICTURE USER in SETUP MENU to display. Push MENU button two times to display MAIN MENU and SUB MENU. Use PRO button to change MAIN MENU. Color of MAIN MENU changes to pink and is selected. CONTRAST BRIGHTNESS CONTROL of CONTRAST PICTURE CONTRAST BRIGHTNESS COLOR TINT SELECT USER ADJUST 0 COLOR TINT Use PRO button to select CONTRAST, BRIGHTNESS and COLOR MENU. (Selected menu is in pink) Push VR button, and BAR and number are changed and screen is adjusted. (BAR sign is in pink when the number is ) Use MENU button to return to PICTURE MENU. SYSTEM : PAL NTSC AUTO CONTROL OF TINT * NTSC ONLY LANGUAGE : NOR/MIR : ENGLISH GERMAN KOREAN JAPANESE SPANISH FRENCH ITALIAN NORMAL MIRROR PICTURE CONTRAST BRIGHTNESS COLOR TINT SELECT USER ADJUST 0 Use PRO button to select TINT MENU. (Pink when it is selected) Push VR button, and BAR and number are changed to red while screen is adjusted in red. Push VR button and BAR and number are changed to green while screen is adjusted in green. Use MENU button to return to PICTURE MENU This is only for CAM,CAM mode. It controls a camera picture (Normal/Mirror) PICTURE : DYNAMIC NORMAL MILD USER
8. Installation MONITOR CM-505. Choose a location where you install the Monitor. Clean the place for the Stand with cleanser and remove the Protective Tape. And then attach it exactly where you want.. Fasten the Monitor with Tapping Screw.. Adjust angle of Stand and install Monitor.. Connect each connecting cable as in the product installation reference. Cable Guidance Fix Knob (Bracket) Tapping screew Stand Base Monitor Cable Connection Control Knob (Angle) Safeguard tape Cable Guidance use Normal Connection 5 7. Connections MONITOR CM-505 Camera (Not Supplied) Insulation Tape Camera (Not Supplied) Extension Cable CAMERA CAMERA DCV YELLOW(VIDEO) 5WHITE(AUDIO) CIGARETTE LIGHTER ADAPTOR CIGARETTE LIGHTER SOCKET IN 6BLACK(STAND By) DVD (Not Supplied) 7GREEN(STAND By) 6STAND BY (BLACK, Priority) 7STAND BY (GREEN) STAND BY + (FOR REAR VIEW) Connect this line to + of reverse light lamp. STAND BY + (FOR SIDE VIEW) Connect this line to + of side light lamp.
CAMERA CM-/AH Tapping screw(rh)x0. Determine a position and a direction of installation so that the rear view can be effectively seen on the monitor screen.. Fix the camera bracket to the vehicle using the provided adhesive tape and tapping screws with spring washers.. Fix the camera between the camera bracket and sun visor using machine screws, and adjust the angle of camera and fasten the screws firmly.. Run the cable from the monitor to the camera. Spring washer(m) Machine screw(ass'y) (PH) M X 8 Sun visor Machine screw (PHW) M X 6 CDS sensor CAMERA CONNECTOR 5 6 Camera Bracket Adhesive tape Safeguard tape IR-LED Mic Spring Washer(M) 7 9. Changing Remote Control Battery POWER IN(DC +V) HEATING B+ (DC +V) NC Pull battery case in the direction of the arrow. VIDEO OUT AUDIO OUT NOR/MIR GND Place a battery with the + sign upward on the battery case. (No. CR05) < CM-/AH > Put the battery case back into the remote control in the direction of the arrow. 6 7
0. Specifications MONITOR CM-505 CAMERA CM-AH ITEM SCREEN SIZE NUMBER OF PIXELS DOT PITCH PANEL BRIGHTNESS DISPLAY AREA CONTRAST RATIO VIEW ANGLE(H/U/D) VOLTAGE POWER SUPPLY CURRENT REAR INPUT POWER INPUT SYSTEM HORIZONTAL FREQUENCY VERTICAL VIDEO INPUT SIGNAL AUDIO SOUND SIGNAL OSD DISPLAY USER CONTROLS REGULATION OPERATING TEMPERATURE STORAGE TEMPERATURE DIMENSION (W x H x D) WEIGHT ACCESSORIES SPECIFICATION NTSC PAL.0 cm (5.0 INCH) 0(H) x 0(V) 0.06(H) x 0.8(V) mm 50 cd/ m 0.76(H) x 76.(V) mm 00 5deg / 0deg / 0deg DC V - 6V 650mA (DC V, MONITOR SET ONLY) DC V - 6V AUTO (NTSC/PAL) 5.7 KHz 5.65 KHz 60Hz 50Hz COMPOSITE VIDEO MONO INPUT 00 mvrms 0.5WATT MAX 7 LANGUAGE POWER, MODE, DIMMER FCC, E-MARK o o 0 C~ + 50 C o o -5 C~ + 60 C 50(W) x 5(H) x 0(D) 0.Kg REMOTE CONTROLLER (WITH BATTERY) MONITOR CABLE ASS Y CIGARETTE LIGHTER ADAPTOR(FUSE A) STAND ASS Y Pick-up device NTSC PAL View of angle Minimum illumination Input Voltage Operating Temperature Camera Weight Dimension Accessories /" 50,000 pixels COLOR CCD /" 90,000 pixels COLOR CCD 0 degree diagonal 0.0LUX DC V/00mA Max -0 to + 55 (+ to + ) 0.Kg(0.88lbs) including bracket 70(W) X (H) X 57(D)mm.7(W) X.7(H) X.(D)inch Camera Bracket Sun Visor Adhesive tape Machine screw(ass'y)(ph) Mx8 Machine screw(phw) Mx6 Tapping screw(th)x0 Spring washer(m) Spring washer(m) Insulation tape Extension cable 8 9
CX-00.GHz Transmitter/Receiver for CAMOS Rear View Systems Manual Ver.. Set consisting of transmitter and receiver Wireless transmission of video and audio signal in a frequency range of, GHz channels switchable Easy connection to CAMOS-rear view systems and cameras Easy installation system is automatically activated when using reverse gear
Installation Usually the transmitter and receiver module must be mounted inside the vehicle. The transmitter should be attached as high as possible in the rear of the vehicle. It can simply be fixed by screw or the enclosed adhesive/velcro tape. The receiver should be installed, if possible, in the same high like the transmitter, for example on the dashboard close to the monitor. To achieve best transmission, you should avoid obstacles (walls, persons, etc.) between transmitter and receiver. Metallic barriers may completely impede the transmission; in this case you have to change the position of the modules. Using a (camping) trailer, the receiver can be installed in the rear of the vehicle (if coverage is insufficient). In this case the receiver module must be connected to the monitor with an additional extension cable (available from specialized dealers). Due to technical factors it is possible that the range of the video signal is higher than the range of audio signal - especially in threshold areas (noise, interference). In this case we would recommend to reduce the monitor's volume. Receiver Transmitter Camera Monitor Tail Light
Connections / Alignment DIP switches Control lamp On/Off switch Receiver: Connect the black cable of receiver module to the camera input of the monitor. Concerning the other connections of the monitor, please see the manual of rear view system. Transmitter: Connect the camera cable to the cable of the transmitter module. Pls pay attention that the marker (arrow) on the plug and jack correspond. Connect the black cable to ground (-), the red cable to the positive pole of the tail light. Please use the enclosed extension cable (red/black). Switch on both units (transmitter and receiver). Once changed to reverse, the rear view system automatically turns on. Setting up the radiochannels In case of interferences during the transmission you should select another channel: Switch off both units. Use a small screw driver, a ball-pen or similiar to position the DIP switches as you see below (push them carefully up resp. down). You have to effect the settings both at the transmitter and the receiver. In the following switch on the modules again. channel channel channel channel
Technical Data Frequency Range Chanels Power Output Video Signals Coverage Power Supply Weight Dimensions Accessories (enclosed), GHz (,/,/,50/,68 GHz) 0mW PAL/NTSC approx.0-0m (outdoor, without obstacles) Volt DC (typ) ca. 00g 95mm(L) x mm(b) x 9mm(H) - Extension cable (red/black) - Fastening screws - Sets adhesive/velcro tape This equipment complies with the essential requirements of EU Directive 999/5/EC ; the radio link CX-00 is in conformity to standards: EN 00 0 -, EN 0 89 - -, EN 60950 and EN 507. The Radio Transmitter may be operatet in the following countries: Germany, France, Great Britain, Netherlands, Italy, Austria, Switzerland (incl. Liechtenstein), Belgium and Spain. IMC GmbH Carl-Zeiss-Str. 96 Trittau Tel. 05-808-0 Fax 05-808-0 www.camos-mulltimedia.com.