Modularized 16E1/T1 Managed Multiplexer FMUX01 Modularized 16E1/T1 + 4x GbE Managed FMUX1 Modularized 16E1/T1 + 4x FE Managed The FMUX01/FMUX1 is a 1U, 19" rack mountable, PDH fiber optic multiplexer that transmits up to 16 s plus a /0/00Base-T (FMUX01) / /0Base-TX (FMUX1) Ethernet over a single fiber optic link. The FMUX01/FMUX1 chassis supports redundant power and hot swappable design. The AC supplies operate from 0~240VAC while DC supplies operate from 18~60VDC. From the rear of the chassis, one to four hot swappable quad E1 or T1 line cards, serial data communications (V.35, X.21, RS-530) or FXO/FXS voice cards are supported. The standard FMUX01 configuration may be viewed or set via the front panel LCD/menu keys, serial VT-0 terminal connection, Telnet, web HTTP or SNMP. 1U, 19 (23) 4-slot chassis 16 E1 (2.048Mb/s) Multiplexer with 0/00Mbps Ethernet and RS-232 data (async) (FMUX01) 16 E1 (2.048Mb/s) Multiplexer with /0Mbps Ethernet and RS- 232 data (async) (FMUX1) RS-232 port for system console One alarm output port, one port 4x /0/00Base-T Ethernet ports (FMUX01) Optical Electrical SFP - LC Data rate 1.25G (FMUX01), 155M (FMUX1) Bit Error Rate Less than -11 Fiber MM 62.2/125μm, 50/125μm SM 9/125μm Distance MM 2km. SM 15/30/50/80/120km WDM 20/40/60/80km Wavelength 13, 1550nm Console, SNMP Ethernet Alarm RJ45 4x RJ45 RJ45 Remote 3G BTS Connection 4x /0/00Base-T Ethernet ports (FMUX1) SNMP management LCD plus menu keys for local configuration Port based VLAN, tag based VLAN & bandwidth control Telnet and web based remote configuration 2 plug-in SFP slot for optical SFP module Forward 24K byte packets on Ethernet port Standards E1:ITU-T, T1:ITU-T, AT&T, ANSI, Ethernet: IEEE 802.3x Indications PWR, Alarm, Phone, ACO, Port, Channels Power Input AC module IN : AC 90 ~ 264V, Out : DC 12V DC module IN : DC 18 ~ 72V, Out : DC 12V Power Consumption < 25W Dimensions 250 x 438 x 43mm (D x W x H) Weight 3.58 kg Temperature 0 ~ 50 C (Operating), 0 ~ 70 C (Storage) Humidity ~ 90% non-condensing Certification CE, FCC 50,000 hrs Modularized 16E1/T1 Multiplexer FMUX01 & FMUX1 Central Office (CO) FMUX01 or FMUX1 BTS 1+1 Optical Protection 16E1 FMUX01 or FMUX1 GbE or FE LAN STM1 GbE or FE LAN 16E1 Customer Premise Equipment (CPE) -Related Products: FMUX1, FMUX1600/160, FMUX04E (16x E1/T1 + 4x GbE/FE FOM,4E1/T1 + 3x FE FOM) & design are subject to change without prior notice. Please visit CTC Union website for more details. -1
Module FMUX01 & FMUX1 Module Standards ITU-T G.703, G.704, AT&T TR-62411,ANSI T1.403 Ports Framing E1 T1 Receive Level 4x E1/T1 RJ45 I/F 4 ports Unframed (clear ) Data rate: 2.048 Mbps ±50 ppm Line code: HDB3 / AMI Line impedance: 120 ohms ±5%, 75ohms ±5% Data rate: 1.544 Mbps ±50 ppm Line code: B8ZS / AMI Line impedance: 0 ohms ±5% Short haul - 15dB RJ-45 4x E1 BNC I/F Standards ITU-T G.703, G.704, G.706, G.732 Ports 4 ports Framing Unframed ( clear ) Data rate E1 2.048 Mbps ± 50 ppm Line code E1 HDB3/AMI Receive Level Short haul - 15dB Line impedance E1 75 ohms ± 5% BNC 75 ohms Related Cables (Please see order information for more details) V35 RS530 RS449 X21 RS232 4x Data Com I/F Standards ITU-T, E1A Card Type V.35/ RS-530 (Include X.21 and RS-449)/ RS-232 I/F Bit rate n x 64K, n = 1 to 32 V.35 & RS-530 up to 2Mbps RS-232 up to 115.2Kbps (ASYNC) Line code NRZ Clock Mode Transparent, Recovery, External (From data port ETC) Internal (From oscillator) Control Signal CTS always On or follows RTS DSR constantly ON, except during test loops (RS-530 DSR always connect to DTR) DCD constantly ON, except during fiber signal loss Test Loops Local loop back, Remote loop back, V.54 Type Uses HD-68 pin D type Female with adapter cables 4x FXO I/F 4x FXS I/F Standards Distance Bandwidth G.711 A-law (separate modules for FXO) 2km 64K voice RJ45 x 4 (4 voice /per unit) Standards Distance Bandwidth G.711 A-law (separate modules for FXS) 2km 64K voice RJ45 x 4 (4 voice /per unit) FMUX01-CH 1U 19 4-Slot Rack Mount Chassis FMUX1-CH 1U 19 4-Slot Rack Mount Chassis FMUX-AC Chassis Power Module 90~264VAC FMUX-DC Chassis Power Module 18~72VDC FMUX-4E1/T1-RJ45 4ch E1/T1 RJ45 interface card FMUX-4E1/T1-Wire 4ch E1/T1 Wire Wrap interface card FMUX-4E1/BNC 4ch G.703 E1 BNC interface card FMUX-V35 V35 interface card with HD68M to 4 x MB34F cable (30cm) Example: Chassis/Power/Line card Only FMUX FMUX A 1 0 0 1 C - CH 01 : GbE 1 : FE FMUX V 3 5 01 : GbE 1 : FE FMUX-530 FMUX-449 FMUX-X21 FMUX-232/Sync FMUX-232/Async FMUX-4FXO FMUX-4FXS FMUX-Phone-2W FMUX-Phone-4W FMUX-EXT/CLK Whole Set FMUX 1 0 0 1 - A C - 2 W - Power Module I/F Line Card -2 & design are subject to change without prior notice. Please visit CTC Union website for more details. Power Type AC DC AA : AC + AC DD : DC + DC AD : AC + DC RS-530 interface card with HD68M to 4 x DB25F cable (30cm) RS-449 interface card with one HD68M to 4 x DB37F cable (30cm) X.21 interface card with one HD68M to 4 x DB15F cable (30cm) RS-232 Sync card with one HD68M to 4 x DB9F cable (30cm) RS-232 Async card with one HD68M to 4 x DB9F cable (30cm) 4 x FXO interface card 4 x FXS interface card 2 Wires order Wire (connect to analogue Telephone set) 4 Wires order Wire (connect to Ear-Mic set) External clock interface card A B C D 2W : 2 Wire Phone 4W : 4 Wire Phone Card Type A : 4x E1 BNC B : 4x E1/T1 RJ45 C : 4x E1/T1 Wire D : 4x V.35 E : 4x RS-232/Async F : 4x RS-530 G : 4x X.21 H : 4x RS-449 I : 4x FXO J : 4x FXS L : EXT/CLK M : 4x RS232/Sync
FMUX1600 FMUX800 16 or 8x E1/T1 + 4x GbE, Managed The FMUX1600/FMUX800 is 1U 19 rack mountable, PDH fiber optical Multiplexer that transmits up to 16/8 E1/T1 + 4 x /0/00Base-T Gigabit Ethernet over a single fiber optic link. The FMUX1600/FMUX800 chassis in available in three different power configurations; single AC, single DC, or AC+DC. The AC supplies operate from 90 ~ 240VAC while DC supplies operate from 18~60VDC. On the rear of the chassis, the BNC model provides 32/16 unbalanced 75 Ohm coaxial connections with BNC connectors while the RJ-45 model provides 16/8 balanced 120 Ohm connections over twisted pair wiring with RJ45 connectors. With two SFP sockets on fiber ports, the FMUX1600/FMUX800 gives you the fiber cabling connector SFP-LC, both multi-mode and single-mode are available as well as BiDi which allows bi-directional transmissions using only a single fiber cable. 1+1 Automatic optical line protection is also supported for the aggregate fiber ports. The standard FMUX1600/FMUX800 configuration may be viewed or set via serial VT-0 terminal connection or SNMP card with web, telnet, and SNMP management Provides 16/8 E1/T1 G.703 transparent transmission over fiber Provides 4x /0/00 Mbit/s Ethernet Ports and 1x RS232 ch. Provides one RS232 Loopback test on E1/T1 fiber port Provides one hotline (order-wire) Supports full/half duplex, M/0M/00M, auto-negotiation Forward K byte jumbo packets on Ethernet port Optical SFP- LC Data rate 1.25Gbps Bit Error Rate Less than -11 Distance MM 2km, SM 15/30/50/80/120km Wavelength WDM 20/40/60/80km Electrical Console : RS232 / SNMP : RJ45 Ethernet : RJ45 (4-port) Alarm : RS232 / Order wire : RJ11 E1 Standards ITU-T G.703, G.704, G.706, G.732 Data Rate 2.048 Mbps ± 50 ppm Line Code HDB3/AMI RJ-45 for 120 ohms BNC for 75 ohms T1 Standards ITU-T G.703, G.704, AT&T TR-62411, ANSI T1.403 Supports 1+1 fiber line protection. Less than 50ms Complete alarm function and can monitor remote device status Power combination AC220V and DC-48V for redundant options Supports RS232 local management; Supports on-line f/w upgrade Supports Web, Telnet, SNMP management (optional) T1 Data Rate 1.544 Mbps ±50 ppm Line Code B8ZS / AMI RJ-45 for 0 ohms Certification CE, FCC, RoHS compliant Standards ITU-T G.703, G.823 and G.742, ANSI, AT&T, IEEE 803.2, IEEE 802.3u, IEEE 802.3ab Indications Power, Alarm, LBK, RD, LCK, RNG, ACO, Port, Power Input 90 ~ 240VAC, 18~60VDC Power Consumption <25W Dimensions 250 x 438 x 43mm (D x W x H) Weight 3.58kg Temperature 0 ~ 60 C (Operating), - ~ 70 C (Storage) 50,000 hrs 16E1/T1 Managed Multiplexer FMUX1600 & FMUX800 Remote 3G BTS connection SDH GbE 16 E1/T1 Local Remote 1+1 Protection GbE 3G BTS FMUX1600 FMUX1600 16E1/T1 -Related Products: FMUX01/1, FMUX160, FMUX04E (16x E1/T1 + 4x GbE/FE FOM,4E1/T1 + 3x FE FOM) & design are subject to change without prior notice. Please visit CTC Union website for more details. -3
FMUX1600B-AD 16x E1 BNC + 4 x /0/00Base-T Ethernet, build-in AC + DC Power FMUX1600R-AD 16x E1/T1 RJ-45 + 4 x /0/00Base-T Ethernet, build-in AC + DC Power FMUX800B-AD 8x E1 BNC + 4 x /0/00Base-T Ethernet, build-in AC + DC Power FMUX800R-AD 8x E1/T1 RJ-45 + 4 x /0/00Base-T Ethernet, build-in AC + DC Power FMUX1600-SNMP SNMP Card with /0Base-TX Ethernet Port FMUX800-SNMP SNMP Card with /0Base-TX Ethernet Port FMUX-Phone-2 2 Wires FMUX-Phone-4 4 Wires Option Models FMUX1600-SNMP SNMP Card with /0Base-TX Ethernet Port FMUX800-SNMP SNMP Card with /0Base-TX Ethernet Port FMUX-Phone-2 2 Wires FMUX-Phone-4 4 Wires Note: SNMP option only required in one unit of paired link E1 Type Power Type FMUX1600 Example: FMUX1600 B DC FMUX Phone Example: FMUX Phone 2-4 & design are subject to change without prior notice. Please visit CTC Union website for more details.
FMUX160 FMUX80 16 or 8x E1/T1 + 4x FE, Managed The FMUX160/FMUX80 is 1U 19 rack mountable, PDH fiber optical Multiplexer that transmits up to 16/8 E1/T1 + 4 x /0Base-TX Fast Ethernet over a single fiber optic link. The FMUX160/FMUX80 chassis in available in three different power configurations; single AC, single DC, or AC+DC. The AC supplies operate from 90 ~ 240VAC while DC supplies operate from 18~60VDC. On the rear of the chassis, the BNC model provides 32/16 unbalanced 75 Ohm coaxial connections with BNC connectors while the RJ-45 model provides 16/8 balanced 120 Ohm connections over twisted pair wiring with RJ45 connectors. the FMUX160/FMUX80 gives you the fiber cabling connector ST SC FC, both multi-mode and single-mode are available as well as BiDi which allows bi-directional transmissions using only a single fiber cable. 1+1 Automatic optical line protection is also supported for the aggregate fiber ports. The standard FMUX160/ FMUX80 configuration may be viewed or set via serial VT-0 terminal connection or SNMP card with web, telnet, and SNMP management. Provides 16/8 E1/T1 G.703 transparent transmission over fiber Provide 4x /0 Mbit/s Ethernet Ports (0Mbps aggregate) Provides one RS232 Loopback test on E1/T1 fiber port Provides one hotline ( order-wire ) Supports full/half duplex, M/0M, auto-negotiation Optical ST, SC, FC (Fixed) Data rate 155.52Mbps Bit Error Rate Less than -11 Distance MM 2km, SM 15/30/50/80/120km WDM 20/40/60/80km Wavelength 13nm, 1550nm, CWDM 1471nm~1611nm Electrical Console : RS232 / SNMP : RJ45 Ethernet : RJ45 (4-port) Alarm : RS232 / Order wire : RJ11 E1 Standards ITU-T G.703, G.704, G.706, G.732 Data Rate 2.048 Mbps ± 50 ppm Line Code HDB3/AMI RJ-45 for 120 ohms BNC for 75 ohms Forward 1792 byte packets on Ethernet port Supports 1+1 fiber line protection. Less than 50ms Complete alarm function and can monitor remote device status Power combination AC220V and DC-48V for redundant options Supports RS232 local management ; Supports on-line f/w upgrade Supports Web, Telnet, SNMP management (optional) T1 Standards ITU-T G.703, G.704, AT&T TR-62411, ANSI T1.403 Data Rate 1.544 Mbps ±50 ppm Line Code B8ZS / AMI RJ-45 for 0 ohms Certification CE, FCC, RoHS compliant Standards ITU-T G.703, G.823 and G.742, ANSI, AT&T, IEEE 803.2, IEEE 802.3u Indications Power, Alarm, LBK, RD, LCK, RNG, ACO, Port, Power Input 90 ~ 240VAC, 18~60VDC Power Consumption <25W Dimensions 250 x 438 x 43mm (D x W x H) Weight 3.58kg Temperature 0 ~ 60 C (Operating), - ~ 70 C (Storage) 75,000 hrs 16E1/T1 Managed Multiplexer FMUX160 & FMUX80 Local Remote 3G BTS connection Remote FE SDH 16 E1/T1 1+1 Protection FE 3G BTS FMUX160 FMUX160 16E1/T1 -Related Products: FMUX01/1, FMUX1600, FMUX04E (16x E1/T1 + 4x GbE/FE FOM,4E1/T1 + 3x FE FOM) & design are subject to change without prior notice. Please visit CTC Union website for more details. -5
Two Fiber model FMUX160B-AD-2SC002 FMUX160R-AD-2SC002 FMUX80B-AD-2SC002 FMUX80R-AD-2SC002 One Fiber model FMUX160B-AD-SC002 FMUX160R-AD-SC002 FMUX80B-AD-SC002 FMUX80R-AD-SC002 16x E1 BNC + 4 x /0Base-T Ethernet, with two MM 2km SC fiber, AC+DC Power 16x E1/T1 RJ45 + 4 x /0Base-T Ethernet, with two MM 2km SC fiber, AC+DC Power 8x E1 BNC + 4 x /0Base-T Ethernet, with two MM 2km SC fiber, AC+DC Power 8x E1/T1 RJ45 + 4 x /0Base-T Ethernet, with two MM 2km SC fiber, AC+DC Power 16x E1 BNC + 4 x /0Base-T Ethernet, with one MM 2km SC fiber, AC+DC Power 16x E1/T1 RJ45 + 4 x /0Base-T Ethernet, with one MM 2km SC fiber, AC+DC Power 8x E1 BNC + 4 x /0Base-T Ethernet, with one MM 2km SC fiber, AC+DC Power 8x E1/T1 RJ45 + 4 x /0Base-T Ethernet, with one MM 2km SC fiber, AC+DC Power Optional modules FMUX160-SNMP FMUX80-SNMP FMUX-Phone-2 FMUX-Phone-4 Note: Example: E1 Type SNMP Card with /0Base-TX Ethernet Port SNMP Card with /0Base-TX Ethernet Port 2 Wires with RJ9 to RJ11 cable 4 Wires SNMP option only required in one unit of paired link FMUX 160 B AD 2 SC 002 M P 2 160: 16E1/T1 B: BNC 80: 8E1/T1 R: RJ45 Power Type AD, DC, AC Fiber Type 2: 2x Fiber Distance 2: 2-Wire 4: 4-Wire M: SNMP SC, ST, FC 002(2KM) 20A(WDM 20KM A Type) 015(15KM) 20B(WDM 20KM B Type) 030(30KM) 40A(WDM 40KM A Type) 050(50KM) 40B(WDM 40KM B Type) -6 & design are subject to change without prior notice. Please visit CTC Union website for more details.
4E1/T1 FMUX04E 4E1/T1 +3x FE FMUX04E is a fixed design for 4xE1 + Fast Ethernet multi-service to dual strand fiber PDH multiplexer. FMUX04E provides E1 transmission transparently and pure 0Mbps Fast Ethernet simultaneously. The fiber optic line is based on SFP technology that allows the flexible use of Multimode or Single mode lines and enables support for different wavelengths and distances. The use of bi-directional SFPs maximizes the utilization of fiber optic line and results in saving line costs. The multiplexer can be equipped with optional AC and DC power supplies for redundant operation. With SNMP and Web-based management in the FMUX04E, the administrator can monitor, configure and control the activity remotely. 4 s unframed E1/T1 3-CH /0Base-TX Ethernet Auto MDI/MDIX Auto-Negotiation or Force mode Supports flow control Supports 1552 packets (max) One clear RS232 up to 250Kbps(Async) 1+1 fiber protection, less than 50ms Supports Digital Diagnostics Monitoring (DDMI) E1/T1 Optical Framing: Unframed (transparent) Bit Rate: E1:2.048 Mb/s, T1: 1.544Mb/s Line Code: E1:AMI/HDB3, T1: AMI/B8ZS Line Impedance: E1: Unbalanced 75 ohms (BNC) E1: Balanced 120 ohms (RJ-45) T1: Balanced 120 ohms (RJ-45) Receiver sensitivity: Short haul Jitter Performance: According to ITU-T G.823 Standard: ITU-T G.644, G.703, G.704, G.706 and G.732 s: RJ-45, BNC Test Loops: LLB (Local Loop Back) RLB (Remote Loop Back) RRLB (Request Remote Loop Back) Bandwidth in optical Line: 155 Mbps Optical : LC (SFP module) Distance: 20/40/80 Km AIS on signal loss on E1/T1 and fiber port Port based VLAN function Loopback test on E1/T1, RS-232, fiber ports Supports Dying Gasp Supports local or remote In-band management Optional SNMP management Supports Order wire Ear / Microphone port. Supports On-Line F/W upgrade (local or remote) by the SNMP manager Optical Ethernet Indication Optical Wavelength: 13nm, 1550nm, WDM Tx13/Rx1550nm (Type A), WDM Tx1550/Rx13nm (Type B) Type: /0Base-TX : 3x RJ-45 Standard: IEEE 802.3, 802.3u Duplex modes: full/half FX1 Link, FX2 link, E1/T1 Mode/Link/Loopback test, Order wire phone indicator, LAN Link/Speed AC : 0~240VAC, DC : 18-75 VDC Power Input Dimensions 248 x 215 x 43mm (D x W x H) Operating 0 ~ 50 C (Operating) Temperature - ~ 20 C (Storage) Humidity ~ 90% non-condensing Certifications CE, FCC, RoHS compliant 75,000 hrs 4E1/T1+FE over fiber p to p connection 4E1/T1 FMUX04E Order Wire SDH 4E1/T1 PBX 4E1/T1 Order Wire LAN Fast Ethernet FMUX04E FMUX04E Fast Ethernet LAN -Related Products: FMUX01/1,FMUX1600/160, FMUX04E (16x E1/T1 + 4x GbE/FE FOM,4E1/T1 + 3x FE FOM) FMUX04E-AC, DC, AD Standalone FOM with built-in AC, DC or AD (AC+DC) Power, optional SNMP FMUX04E-SNMP SNMP management card, support web, telnet, SNMP functions SNMP option only required in one unit of paired link Note: & design are subject to change without prior notice. Please visit CTC Union website for more details. -7