FT00/H1-TE Embedded & Industrial PCs INTERNATIONAL PRODUCTS AND CONFIGURATIONS FT00/H1-TE BASIC SYSTEM FT00/H1-TE basic configuration LCD TFT 12.1" No Touch-Screen Intel Celeron M 1.5GHz 25 MB RAM kit HDD 40GB 2.5" SATA No FDD Power supply 220V/AC Alphanumeric keyboard DISPLAY TOUCH-SCREEN CPU RAM MEMORY HARD DISK POWER SUPPLY ETHERNET PORTS OPTIONS LCD TFT 12.1" SVGA, 800x00, 1M colors 2 backlamps, 350 cd/m 2 Viewing angle: 140 H, 120 V LCD TFT 15" XGA, 1024x78, 1M colors 4 backlamps, 450 cd/m 2 Viewing angle: 10 H, 155 V LCD TFT 15" XGA, 1024x78, 1M colors 4 backlamps, 00 cd/m 2 Viewing angle: 120 H, 100 V LCD TFT da 17" SXGA, 1280x1024, 1M colors 2 backlamps, 300 cd/m 2 Viewing angle: 150 H, 135 V No Touch-Screen Touch-Screen 12.1" 5-wire resistive technology (ELO) Controller integrated on board Touch-Screen 15" 5-wire resistive technology (ELO) Controller integrated on board Touch-Screen 17" 5-wire resistive technology (ELO) Controller integrated on board Intel Celeron M 1.5 GHz, 400MHz front side bus, 1MB cache socket 478 μfc-pga Intel Pentium M 1.73 GHz, 533MHz front side bus, 2MB cache socket 478 μfc-pga Intel Pentium M 2 GHz, 533MHz front side bus, 2MB cache socket 478 μfc-pga 25 MB 1 SODIMM module DDR2 PC4300 512 MB 1 SODIMM module DDR2 PC4300 1 GB 1 SODIMM module DDR2 PC4300 2 GB 2 SODIMM modules DDR2 PC4300, 1 GB each No Kit Hard Disk Kit HDD 40GB 2.5" SATA 5400rpm, 8 MB buffer Kit HDD 0GB 2.5" SATA 5400rpm, 8 MB buffer Kit HDD 80GB 2.5" SATA 5400rpm, 8 MB buffer 110 220V/AC 140W, autoranging 18 3V/DC 140W, autoranging 2 x 10/100Mbit RJ45 connector 1 x 10/100Mbit, 1 x 10/100/1000Mbps RJ45 connector Additional serial port (3rd) RS-232/422/485 DB15 male connector > see annotation 1 Additional serial port (3rd) RS-232/422/485 RS-422/485 optoisolated DB15 male connector > see annotation 1 Parallel port SPP-EPP-ECP bidirectional DB25 male connector > see annotation 1 Fieldbus module NETCORE > see annotation 2 Warranty extension to 18 months + 1 month exemption on basic system and its variants Warranty extension to 24 months + 1 month exemption on basic system and its variants ANNOTATIONS 1: Additional serial ports RS-232/422/485 and parallel port can be installed alternatively one to the other only 2: For fieldbus module NETCORE specifications see page 107 of Poducts and Configurations dated November 8th, 200 TECHNICAL SPECIFICATIONS: see next page 2/03/2007
FT00/H1-TE FT00/H1-TE BASIC SYSTEM TECHNICAL SPECIFICATIONS Case Panel mount Overall dimensions & weight See details on the rear Frontal protection IP5 Tastiera Tastiera alfanumerica completa a membrana, 12 tasti funzionali, tasti direzione e controllo Motherboard "All-In-One" type ASEM 921 with watchdog timer, hardware system for temperature and voltage board diagnostics Video controller Integrated on-board, VGA standard analog interface (external port) and LVDS digital interface for TFT LCD (internal socket) Simul Scan Video memory (shared) 4/128 MB selectable in system setup RAM memory sockets 2 x SODIMM modules, 200 pin RAM memory DDR2-533 type PC4300 low profile Minimum system memory 25 MB Maximum system memory 2 GB Mass storage interfaces 1 x FDD 1 x ATA/100 (Master, Slave) 2 x SATA/150 Solid State Disk interface 1 x Compact Flash type II slot, rear access On-board options predisposition Additional serial port (3rd) predisposition (see OPTIONS) Bus expansions slots Not available Frontal access interfaces 2 x USB (2 x 2.0) standard-a connector Rear access interfaces 2 x PS/2 (K/M) 2 x Ethernet 10/100Mbit RJ45 connector 4 x USB (2 x 2.0) standard-a connector 1 x analog VGA DB15 female connector Rear access serial interfaces Fieldbus interfaces 2 x RS-232 DB9 male connector NETCORE fieldbus module predisposition (see OPTIONS) > see annotation 2 at previous page Environmental specifications Operating temperature: 0 +50 C without HDD, 0 +45 C with HDD Storage temperature: -20 +0 C Humidity: 80% (non-condensing) Standard warranty 12 months + 1 month exemption warranty management by ASEM headquarters FT00/H1-TE OVERALL DIMENSIONS (mm) 2/03/2007
FT00/H3-TE Embedded & Industrial PCs INTERNATIONAL PRODUCTS AND CONFIGURATIONS FT00/H3-TE basic configuration DISPLAY TOUCH-SCREEN CPU RAM MEMORY HARD DISK POWER SUPPLY EXPANSION SLOTS ETHERNET PORTS FDD/CD/DVD REAR ACCESS OPTIONS No Touch-Screen Touch-Screen 12.1" 5-wire resistive technology (ELO) Controller integrated on board Touch-Screen 15" 5-wire resistive technology (ELO) Controller integrated on board Intel Celeron M 1.5 GHz, 400MHz front side bus, 1MB cache socket 478 μfc-pga No Kit Hard Disk Kit HDD 40GB 2.5" SATA 5400rpm, 8 MB buffer Kit HDD 0GB 2.5" SATA 5400rpm, 8 MB buffer Kit HDD 80GB 2.5" SATA 5400rpm, 8 MB buffer Kit HDD 80GB 3.5" SATA 7200rpm, 8 MB buffer Kit HDD 10GB 3.5" SATA 7200rpm, 8 MB buffer 110 220V/AC 140W, autoranging 18 3V/DC 140W, autoranging 2 x 10/100Mbit RJ45 connector 1 x 10/100Mbit, 1 x 10/100/1000Mbps RJ45 connector Additional serial port (3rd) RS-232/422/485 DB15 male connector > see annotation 1 Additional serial port (3rd) RS-232/422/485 RS-422/485 optoisolated DB15 male connector > see annotation 1 Parallel port SPP-EPP-ECP bidirectional DB25 male connector > see annotation 1 Fieldbus module NETCORE > see annotation 2 FT00/H3-TE BASIC SYSTEM LCD TFT 12.1" No Touch-Screen Intel Celeron M 1.5GHz 25 MB RAM kit HDD 40GB 2.5" SATA No FDD Power supply 220V/AC 2 PCI slots Alphanumeric keyboard LCD TFT 12.1" SVGA, 800x00, 1M colors 2 backlamps, 350 cd/m 2 Viewing angle: 140 H, 120 V LCD TFT 15" XGA, 1024x78, 1M colors 4 backlamps, 450 cd/m 2 Viewing angle: 10 H, 155 V LCD TFT 15" XGA, 1024x78, 1M colors 4 backlamps, 00 cd/m 2 Viewing angle: 120 H, 100 V LCD TFT da 17" SXGA, 1280x1024, 1M colors 2 backlamps, 300 cd/m 2 Viewing angle: 150 H, 135 V Touch-Screen 17" 5-wire resistive technology (ELO) Controller integrated on board Intel Pentium M 1.73 GHz, 533MHz front side bus, 2MB cache socket 478 μfc-pga Intel Pentium M 2 GHz, 533MHz front side bus, 2MB cache socket 478 μfc-pga 25 MB 1 SODIMM module DDR2 PC4300 512 MB 1 SODIMM module DDR2 PC4300 1 GB 1 SODIMM module DDR2 PC4300 2 GB 2 SODIMM modules DDR2 PC4300, 1 GB each 2 x PCI half size on riser card 2 x PCI half size on riser card with predisposition for 32-bit, 512KB max NOVRAM 1 x PCI, 1 x PCI-Express x1 format half size on riser card Kit FDD 3.5" 1.44 MB H=1" white bezel > see annotation 1 Kit CD-ROM E-IDE 24x Slim H=0.5" black bezel Kit COMBO DVD-ROM E-IDE 24x / CD-RW 24x10x24x Slim H=0.5" black bezel Kit DVD-RW E-IDE 8x4x24x10x Slim H=0.5" black bezel Kit FDD 3.5" 1.44 MB Slim + CD-ROM E-IDE 24x Slim H=1" black bezel Kit FDD 3.5" 1.44 MB Slim + COMBO E-IDE DVD-ROM 24x / CD-RW 24x10x24x Slim H=1" black bezel Kit FDD 3.5" 1.44 MB Slim + DVD-RW E-IDE 8x4x24x10x Slim H=1" black bezel Warranty extension to 18 months + 1 month exemption on basic system and its variants Warranty extension to 24 months + 1 month exemption on basic system and its variants ANNOTATIONS 1: 2: 3: Standard height (1") FDD can be installed as an alternative to the slim units only Additional serial ports RS-232/422/485 and parallel port can be installed alternatively one to the other only For fieldbus module NETCORE specifications see page 107 of Poducts and Configurations dated November 8th, 200 TECHNICAL SPECIFICATIONS: see next page 2/03/2007
FT00/H3-TE FT00/H3-TE BASIC SYSTEM TECHNICAL SPECIFICATIONS Case Panel mount Overall dimensions & weight See details on the rear Frontal protection IP5 Tastiera Tastiera alfanumerica completa a membrana, 12 tasti funzionali, tasti direzione e controllo Motherboard "All-In-One" type ASEM 921 with watchdog timer, hardware system for temperature and voltage board diagnostics Video controller Integrated on-board, VGA standard analog interface (external port) and LVDS digital interface for TFT LCD (internal socket) Simul Scan Video memory (shared) 4/128 MB selectable in system setup RAM memory sockets 2 x SODIMM modules, 200 pin RAM memory DDR2-533 type PC4300 low profile Minimum system memory 25 MB Maximum system memory 2 GB Mass storage interfaces 1 x FDD 1 x ATA/100 (Master, Slave) 2 x SATA/150 Solid State Disk interface 1 x Compact Flash type II slot, rear access On-board options predisposition Additional serial port (3rd) predisposition (see OPTIONS) Bus expansions slots 2 x PCI Frontal access interfaces 2 x USB (2 x 2.0) standard-a connector Rear access interfaces 2 x PS/2 (K/M) 2 x Ethernet 10/100Mbit RJ45 connector 4 x USB (2 x 2.0) standard-a connector 1 x analog VGA DB15 female connector Rear access serial interfaces 2 x RS-232 DB9 male connector Fieldbus interfaces NETCORE fieldbus module predisposition (see OPTIONS) > see annotation 3 at previous page Environmental specifications Operating temperature: 0 +50 C without HDD, 0 +45 C with HDD Storage temperature: -20 +0 C Humidity: 80% (non-condensing) Standard warranty 12 months + 1 month exemption warranty management by ASEM headquarters FT00/H3-TE OVERALL DIMENSIONS (mm) 2/03/2007
FT00/H4-TE Embedded & Industrial PCs INTERNATIONAL PRODUCTS AND CONFIGURATIONS FT00/H4-TE basic configuration DISPLAY TOUCH-SCREEN CPU RAM MEMORY HARD DISK POWER SUPPLY EXPANSION SLOTS ETHERNET PORTS FDD/CD/DVD REAR ACCESS OPTIONS LCD TFT da 17" SXGA, 1280x1024, 1M colors 2 backlamps, 300 cd/m 2 Viewing angle: 150 H, 135 V Intel Celeron M 1.5 GHz, 400MHz front side bus, 1MB cache socket 478 μfc-pga Intel Pentium M 1.73 GHz, 533MHz front side bus, 2MB cache socket 478 μfc-pga Intel Pentium M 2 GHz, 533MHz front side bus, 2MB cache socket 478 μfc-pga 25 MB 1 SODIMM module DDR2 PC4300 512 MB 1 SODIMM module DDR2 PC4300 1 GB 1 SODIMM module DDR2 PC4300 2 GB 2 SODIMM modules DDR2 PC4300, 1 GB each No Kit Hard Disk Kit HDD 40GB 2.5" SATA 5400rpm, 8 MB buffer Kit HDD 0GB 2.5" SATA 5400rpm, 8 MB buffer Kit HDD 80GB 2.5" SATA 5400rpm, 8 MB buffer Kit HDD 80GB 3.5" SATA 7200rpm, 8 MB buffer Kit HDD 10GB 3.5" SATA 7200rpm, 8 MB buffer 110 220V/AC 140W, autoranging 18 3V/DC 140W, autoranging 2 x 10/100Mbit RJ45 connector 1 x 10/100Mbit, 1 x 10/100/1000Mbps RJ45 connector Additional serial port (3rd) RS-232/422/485 DB15 male connector > see annotation 1 Additional serial port (3rd) RS-232/422/485 RS-422/485 optoisolated DB15 male connector > see annotation 1 Parallel port SPP-EPP-ECP bidirectional DB25 male connector > see annotation 1 Fieldbus module NETCORE > see annotation 2 FT00/H4-TE BASIC SYSTEM LCD TFT 12.1" No Touch-Screen Intel Celeron M 1.5GHz 25 MB RAM kit HDD 40GB 2.5" SATA No FDD Power supply 220V/AC 4 PCI slots Alphanumeric keyboard LCD TFT 12.1" SVGA, 800x00, 1M colors 2 backlamps, 350 cd/m 2 Viewing angle: 140 H, 120 V LCD TFT 15" XGA, 1024x78, 1M colors 4 backlamps, 450 cd/m 2 Viewing angle: 10 H, 155 V LCD TFT 15" XGA, 1024x78, 1M colors 4 backlamps, 00 cd/m 2 Viewing angle: 120 H, 100 V No Touch-Screen Touch-Screen 12.1" 5-wire resistive technology (ELO) Controller integrated on board Touch-Screen 15" 5-wire resistive technology (ELO) Controller integrated on board Touch-Screen 17" 5-wire resistive technology (ELO) Controller integrated on board 4 x PCI half size on riser card 4 x PCI half size on riser card with predisposition for 32-bit, 512KB max NOVRAM 3 x PCI, 1 x PCI-Express x1 format half size on riser card Kit FDD 3.5" 1.44 MB H=1" white bezel > see annotation 1 Kit CD-ROM E-IDE 24x Slim H=0.5" black bezel Kit COMBO DVD-ROM E-IDE 24x / CD-RW 24x10x24x Slim H=0.5" black bezel Kit DVD-RW E-IDE 8x4x24x10x Slim H=0.5" black bezel Kit FDD 3.5" 1.44 MB Slim + CD-ROM E-IDE 24x Slim H=1" black bezel Kit FDD 3.5" 1.44 MB Slim + COMBO E-IDE DVD-ROM 24x / CD-RW 24x10x24x Slim H=1" black bezel Kit FDD 3.5" 1.44 MB Slim + DVD-RW E-IDE 8x4x24x10x Slim H=1" black bezel Warranty extension to 18 months + 1 month exemption on basic system and its variants Warranty extension to 24 months + 1 month exemption on basic system and its variants ANNOTATIONS 1: Standard height (1") FDD can be installed as an alternative to the slim units only 2: Additional serial ports RS-232/422/485 and parallel port can be installed alternatively one to the other only 3: For fieldbus module NETCORE specifications see page 107 of Poducts and Configurations dated November 8th, 200 TECHNICAL SPECIFICATIONS: see next page 2/03/2007
FT00/H4-TE FT00/H4-TE BASIC SYSTEM TECHNICAL SPECIFICATIONS Case Panel mount Overall dimensions & weight See details on the rear Frontal protection IP5 Tastiera Tastiera alfanumerica completa a membrana, 12 tasti funzionali, tasti direzione e controllo Motherboard "All-In-One" type ASEM 921 with watchdog timer, hardware system for temperature and voltage board diagnostics Video controller Integrated on-board, VGA standard analog interface (external port) and LVDS digital interface for TFT LCD (internal socket) Simul Scan Video memory (shared) 4/128 MB selectable in system setup RAM memory sockets 2 x SODIMM modules, 200 pin RAM memory DDR2-533 type PC4300 low profile Minimum system memory Maximum system memory 25 MB 2 GB Mass storage interfaces 1 x FDD 1 x ATA/100 (Master, Slave) 2 x SATA/150 Solid State Disk interface 1 x Compact Flash type II slot, rear access On-board options predisposition Additional serial port (3rd) predisposition (see OPTIONS) Bus expansions slots 4 x PCI Frontal access interfaces 2 x USB (2 x 2.0) standard-a connector Rear access interfaces 2 x PS/2 (K/M) 2 x Ethernet 10/100Mbit RJ45 connector 4 x USB (2 x 2.0) standard-a connector 1 x analog VGA DB15 female connector Rear access serial interfaces 2 x RS-232 DB9 male connector Fieldbus interfaces NETCORE fieldbus module predisposition (see OPTIONS) > see annotation 3 at previous page Environmental specifications Operating temperature: 0 +50 C without HDD, 0 +45 C with HDD Storage temperature: -20 +0 C Humidity: 80% (non-condensing) Standard warranty 12 months + 1 month exemption warranty management by ASEM headquarters FT00/H4-TE OVERALL DIMENSIONS (mm) 2/03/2007