TestingEngine http://www.test4engine.com Test4Engine test dumps questions free test engine latest version
Exam : 1Y0-311 Title : Citrix XenApp and XenDesktop 7.15 LTSR Advanced Administration Vendor : Citrix Version : DEMO Get Latest & Valid 1Y0-311 Exam's Question and Answers 1 from Test4engine.com. 1
NO.1 Scenario: An application that renders locally and creates a large number of temporary files on the local drive is installed on the Desktop OS machines. A Citrix Engineer creates a vdisk in Private mode with this application installed. The engineer is in the process of updating a vdisk from Private mode to Standard mode and needs to determine the write cache type. Which cache type would provide the best performance in this scenario? A. Cache on device hard drive B. Cache on server persisted C. Cache on server D. Cache in device RAM with overflow on hard disk NO.2 Scenario: A Citrix XenApp Administrator configured the audio quality to low in a Citrix Group Policy Object and applied it to all the XenApp servers in the farm. A few weeks later, another administrator from the team created an OU Group Policy Object and set the audio quality to high. The administrator applied the policy object to the OU that contains all the XenApp servers in the farm. What would be the audio quality for all the XenApp servers using precedence for the resultant policy? A. The audio on all the XenApp servers in the farm will be set to high quality. B. The audio quality will change every week after the weekly restart phase. C. The audio on all the XenApp servers in the farm will be set to low quality. D. Some servers will be set to use low quality audio, and the others will be set to use high quality audio. NO.3 What is the default priority order for selecting the preferred zone in a multi-zone XenApp and XenDesktop environment? A. Application Home, User Home; User Location B. User Home; Application Home; User Location C. User Location; User Home; Application Home D. User Location; Application Home; User Home E. Application Home; User Location; User Home NO.4 What occurs after a Provisioning Services target device downloads or otherwise accesses the bootstrap file? A. Steady-state streaming B. The login process C. IP acquisition D. Single-Read mode NO.5 What are two benefits of creating a centralized vdisk Store? (Choose two.) A. Minimizes the storage requirement for vdisks Get Latest & Valid 1Y0-311 Exam's Question and Answers 2 from Test4engine.com. 2
B. Provides redundancy without further configuration C. Does NOT require vdisk files to be replicated D. Allows for the use of differencing disks Answer: C,D NO.6 Which repository can a Citrix Engineer use to store Elastic Layers within the network? A. Windows File Server Share B. FTP Server C. Hypervisor data store D. SharePoint site NO.7 How can a Citrix Engineer update applications in an AppLayering environment? A. Grant the user administrative rights to update the applications. B. Install applications with automatic updates into the OS layer. C. Create a new application layer and install the updated version of the application in it. D. Enable automatic updates in the App Layers. NO.8 A Citrix Engineer needs to create a Workspace Environment Management (WEM) Delegated Administrator account for a new member of the IT team who needs access to manage System Optimizations such as CPU, RAM, Process Management settings and view the entire console. Which type of Delegated Administrator should the engineer create for the new member? A. Advanced Settings Manager B. Filters Manager C. System Utilities Manager D. Full Access NO.9 Scenario: A Citrix Engineer is managing a XenApp and XenDesktop environment that has been built with the following site architecture: The environment consists of one Site with three zones. The primary Zone is located in datacenter A. Satellite Zone 1 is located in datacenter B. Satellite Zone 2 is located in datacenter C. Gateway A is in datacenter A. Gateway B is in datacenter B. A NetScaler Gateway has been set up in datacenter B. Each Gateway has access to all zones. The StoreFront server group is located in the Primary Zone and enumerates all resources within the Site. Delivery Controllers are configured in all three zones. Application B is available in all zones. A User Home has been configured for User 1 in Satellite Zone 2. Get Latest & Valid 1Y0-311 Exam's Question and Answers 3 from Test4engine.com. 3
Optimal Gateway Routing has been configured so that Gateway A is preferred for the Primary Zone and Satellite Zone 2; Gateway B is preferred for Satellite Zone 1. User 1 is located near datacenter A, logs in through NetScaler Gateway and attempts to launch Application B. What will be the expected behavior in this scenario? A. Resource enumeration and the HDX connection are established using Gateway B. B. Resource enumeration occurs using Gateway B; the HDX connection is established using Gateway A. C. Resource enumeration and the HDX connection are established using Gateway A. D. Resource enumeration occurs using Gateway A; the HDX connection is established using Gateway B. E. Resource enumeration occurs using Gateway B; the HDX connection is established using Gateway A. NO.10 Which Citrix technology can a Citrix Engineer use to optimize the CPU or bandwidth consumption of HDX sessions? A. Provisioning Services B. App Layering C. Workspace Environment Management D. Insight Services Explanation Provisioning services for HDX sessions allow you to optimize CPU or bandwidth consumption by increasing and decreasing the values. NO.11 Scenario: A Citrix Engineer is managing an existing XenDesktop and Workspace Environment Management (WEM) infrastructure. The engineer performed recent benchmarks on all the user applications. As a result of this investigation, the engineer determined that some applications are consuming excess memory even when they are idle and NOT actively being utilized by users. This results in performance degradation of active applications. Which step can the engineer take to help improve the performance degradation of active applications? A. Enable Working Set Optimization and Exclude Specified Processes. B. Enable Process I/O Priority and add Specified Processes. C. Enable Working Set Optimization and set Idle State Limit to 10 minutes. D. Enable Working Set Optimization and set Idle Sample Time to 10 minutes. NO.12 In FlexCast Management Architecture (FMA), all services register with. (Choose the correct option to complete the sentence.) A. Citrix Trust Service (CTS) B. Central Configuration Service (CCS) C. Delegated Administration Service (DAS) Get Latest & Valid 1Y0-311 Exam's Question and Answers 4 from Test4engine.com. 4
D. Configuration Logging Service (CLS) Answer: B Get Latest & Valid 1Y0-311 Exam's Question and Answers 5 from Test4engine.com. 5