CONVERTIBLE PC CASE MINI TOWER CONFIGURATION
Welcome to RIOTORO Thank you for purchasing the MORPHEUS! The first convertible PC case, resizes to fit your evolving needs. The perforated mesh exterior and keeps the PC cool, and USB Type-C provides state-of-the-art connectivity. Note: This manual is a guide for the Morpheus convertible case. For instructions on installing the motherboard and other components, please refer to their documentation.
CONVERTIBLE PC CASE CONTENTS Before You Begin - Exploded view - What is in the box - Requirements 4 5 7 4 Trim / Side Panel Assembly - Components required to build this section - Secure the trim to the structure - Install cooling bracket and filter - Install side panels 37 38 40 4 Back / Bottom Panel Assembly - Components required to build this section - Unpack components - Create an L-Shape structure - Secure the structure - Change the PCIe bracket - Install the exhaust fan 2 Middle Panel Assembly - Components required to build this section - Unpack components - Seure the structure - Secure the drive caddies 9 0 2 3 7 8 9 20 24 5 Installing All Components - Specifications - Motherboard installation - Connect the Front Panel Switches and LEDs - Power Supply Installation - SSD / HDD Installation - Fan Installation: Front, top, bottom - Attaching the Case Fan Cables - Water Cooling Installation - 20.0 mm or 40.0 mm options - GPU Installation 44 45 46 47 48 49 50 5 52 3 Top / Front Panel Assembly - Components required to build this section - Unpack components - Create an L-Shape structure - Secure the structure 26 27 28 29 Everything Else - General Maintenace - Important Safety Information - LIMITED PRODUCT WARRANTY 54 55 56 2
Before You Begin www.riotoro.com/morpheus
CONVERTIBLE PC CASE Exploded view 5 2 4 20 3 5 9 4 6 7 8 0 9 2 3 6 8 7. I/O panel 2. Dust filter 3. Top panel structure 4. Extension bracket 5. SSD cage 6. HDD cage 7. Middle panel 8. Cable management channels 9. Cooling bracket 0. Base plate structure. Bottom panel 2. Dust filters 3. Back panel structure 4. PCIe expasion bracket 5. Back trim 6. Front panel structure 7. Front trim 8. Red LED logo 9. Dust filter 20. Adjustable side panel 2. Thumb screws 2 Before You Begin 4
MORPHEUS CONVERTIBLE PC CASE WHAT S IN THE BOX ITEM IMAGE 2 3 MORPHEUS PATENT PENDING OVERVIEW RIOTORO Morpheus, the world's first convertible PC case, allows you to resize your PC as your needs evolve. Morpheus can easily shape-shift to and from a short or tall ATX mid-tower. The entire exterior is perforated mesh, which combined with the stock dual 40.0 mm fans, keeps your PC s components running cool and quiet even in extreme gaming configurations. Plenty of easy-to-install cooling options are available thanks to a removal cooling mount and support for additional fans or two 240mm radiators. Tool-less features, combined with the strategically placed cable routing channels, drive trays, and cooling bracket, make building Morpheus a snap. Plus we added state-of-the-art USB Type-C and USB 3.0 ports for high-speed connections to modern storage and mobile devices. RIOTORO INC. KEY DESIGN ELEMENTS - Resizable from mid-to-mini tower height - High-density perforated mesh on all sides for superior cooling - USB-C and USB 3.0 ports - Dual compartments with streamlined airflow and isolate heat - Supports E-ATX, ATX, microatx and mini-itx motherboards - Dual 20.0 mm fans, additional mounts for 40.0 mm fans and 240.0 mm water coolers - Optimized cable routes, mount points hassle free assembly - 2x 3.5-inch HDD plus, up to 4x 2.5-inch SSD out of the box COMPONENT SECTIONS BACK PANEL - High-airflow perforated mesh panel - x 80.0 mm exhaust fan BOTTOM PANEL - High-airflow perforated mesh panel - 2x 20.0 mm or 40.0 mm fans - ABS feet - Easily accessible dust filters to help keep the computer clean CONFIGURATIONS: MIDDLE PANEL - Dual chamber configuration - CPU cutout with rubber grommets, cable and management routes with velcro ties - Mini-Tower & Mid-Tower components - Removable storage brackets for 2x HDD and up to 4x SSD - Removable bracket with mounts for 2x 20.0 / 40.0 mm fans or up to 280.0 mm radiators FRONT PANEL - High-airflow perforated mesh panel - Red LED RIOTORO bullhead logo TOP PANEL - High-airflow perforated mesh panel - I/O panel with 2 x USB Type-C, 2x USB 3.0, x Headphone, x Microphone, RGB fan control (mode, color, brightness) USE SECTION Build the base & back strucure SECTION 2 Build the middle structure SECTION 3 Build the front & top structure Mouse Pad Surface protection & quick reference Side panel with magnetic filter Cover both sides of the case 2 SIDE PANEL - High-airflow perforated mesh panel - Left and Right panels each consist of three resizable mesh sheets - Magnetic dust filter ASSEMBLY MID-TOWER MINI-TOWER 4 27.0 x 400.0 x 466.0 mm 27.0 x 466.0 x 466.0 mm QTY DESCRIPTION Section One: take out components from protective bag, remove security thumb screws, position back panel in an upright position and tighten the screws. If you are building a Mini-Tower configuration make sure to change the expansion bracket and adjust back panel size. Section Two: take out components from protective bag, position and screw middle panel to section one. If you are building a Mid-Tower configuration make sure to add the expansion to the middle section, SSD expansion caddy and tighten screws. Section Three: take out components from protective bag, remove security thumb screws, position front panel in an upright position and tighten the screws. If you are building a Mini-Tower configuration, make sure to adjust front panel size, screw components to previous assembly and tighten screws. Section Four: take out components from protective bag and use red thumb screws to secure to previous sections. If you are building a Mini-Tower configuration make sure to adjust side panel size. 5 Before You Begin 5
CONVERTIBLE PC CASE WHAT S IN THE BOX ITEM IMAGE DESCRIPTION USE QTY 6 20.0 mm Red LED Fan Front, Top, or Bottom 2 7 80.0 mm Exhaust Fan Back 8 Screw M3 x 5mm Trim installation 9 Screw M3 x 5mm Structure installation 0 Screw 5 x 0KT Fan installation (front/rear) Thumb Screw 9*5mm (Red) Side Panel 4 2 Thumb Screw 9*5mm (Black) Side Panel 4 Before You Begin 6
CONVERTIBLE PC CASE REQUIREMENTS In order to assemble Morpheus to the desired form factor (either mini or mid tower) you will need:. A flat working area (e.g. desk or table) with sufficient space 2. A magnetic Phillips screw driver 9 This means you need to have the Phillips screw driver available in order to complete this assembly and the type of screw you need. Start by taking the entire content out of the box, sort them out by section, take out the quick start mouse mat and use it as general guide and building surface. Note: Handle all components with care, should you need any assistance go to www.riotoro.com/support Before You Begin 7
Back / Bottom Panel Assembly www.riotoro.com/morpheus
BACK / BOTTOM PANEL ASSEMBLY Components required to build this section: IMAGE DESCRIPTION USE QTY Top & bottom trim Back panel PCIe bracket Back panel 2 Mid Mini Adjustable top structure & body Back panel Bottom structure and feet Bottom panel Dust filter Bottom panel 2 80.0 mm Exhaust Fan Back panel Screw M3 x 5mm Trim installation 5 Screw M3 x 5mm Structure installation 2 Screw 5 x 0KT Fan installation 4 Chapter 9
BACK / BOTTOM PANEL ASSEMBLY Unpack components To start the assembly, you need to: - Take out the preassembled bottom and back panel out of the bag. - Remove the top back trim and set it aside for later use, additionally you need to remove security thumb screws on each side Note: you may discard the security screws as they are not used for the assembly Chapter 0
BACK / BOTTOM PANEL ASSEMBLY Create an L-Shape structure - Lift the back panel to an upright position, in order to make an L-Shaped structure,, tke out the shipping foam, mini tower expansion bracket and 80.0 mm fan and set them aside for later use. - Make sure the back and bottom panels are properly aligned and tighten the two structure screws ( and 2) on each side of the L-Shape Structure. 2 9 Chapter
BACK / BOTTOM PANEL ASSEMBLY Secure the structure - Locate the two screw holes at the bottom of the structure, place and tighten two structure screws. 9 2 screw them from the outside in Chapter 2
BACK / BOTTOM PANEL ASSEMBLY Change the PCIe bracket In order to build a mini tower form factor, you need to change the expansion bracket. - Loosen and remove the two structure screws ( and 2) that secure the adjustable top to the back panel body and set it aside. Remove the adjustable top and the mid tower expansion bracket. 2 slide upwards 9 Chapter 3
BACK / BOTTOM PANEL ASSEMBLY Change the PCIe bracket - Take out the mini tower expansion bracket from the cardboard protection and attach it to the back panel body by using two structure screws. 9 2 screw them from the outside in Chapter 4
BACK / BOTTOM PANEL ASSEMBLY Change the PCIe bracket - Slide the adjustable top back into position and align the adjustable top and back panel body, additionally place and tighten five structure screws. slide downwards 5 3 4 2 Chapter 5
BACK / BOTTOM PANEL ASSEMBLY Install the exhaust fan - Align the fan to the back panel body, place and tighten the fan screws (provided in box PL0-). 2 0 3 4 screw them from the outside in Chapter 7
2 Middle Panel Assembly www.riotoro.com/morpheus
MIDDLE PANEL ASSEMBLY Components required to build this section: IMAGE DESCRIPTION USE QTY panel with 6x Cable Management Routing Channels Middle panel Base plate Middle panel HDD bracket for two drives Middle panel SSD bracket for two drives Middle panel 2 Extension plate Middle panel HDD stabilizer Middle panel Screw M3 x 5mm Structure installation 2 Chapter 2 8
MIDDLE PANEL ASSEMBLY Unpack components Provided a successful SECTION assembly, now the next step is to install the middle panel and its components. To start the assembly, you need to: - Take out the preassembled middle panel and base plate out of the bags. - Take out the HDD stabilizer and structure screws from Box PL02-. Chapter 2 9
MIDDLE PANEL ASSEMBLY Secure the structure - Align the holes for the preassembled middle panel and base plate, join both parts by placing and tightening two ( & 2) structure screws. 9 2 screw them from the outside in Chapter 2 20
MIDDLE PANEL ASSEMBLY Secure the structure - Get the HDD stabilizer, align the screw holes, place and tighten two structure screws in order to secure it into place. 9 2 Note: you need to have the Phillips screw driver available in order to complete this assembly. Chapter 2 2
MIDDLE PANEL ASSEMBLY Secure the structure Once the middle section is fully assembled, place it inside the SECTION build. Make sure to align the screw holes to facilitate assembly. - Place the middle panel on top of the bottom panel and secure it into position using five structure screws; three (, 2, & 3) to connect the back panel and middle panel and two (4 & 5) to connect the back panel and the HDD security arm. 9 4 5 2 3 screw them from the outside in Chapter 2 22
MIDDLE PANEL ASSEMBLY Secure the structure - Turn over the build, place and tighten a screw located in the bottom panel. 9 screw them from the outside in Chapter 2 23
MIDDLE PANEL ASSEMBLY Secure the drive caddies - Turn over the build to its upright position. screw them from the outside in Chapter 2 24
43 Top Trim // Front Side Panel Assembly www.riotoro.com/morpheus
TOP / FRONT PANEL ASSEMBLY Components required to build this section: IMAGE DESCRIPTION USE QTY Middle structure and dust filter Front panel Adjustable to and bottom structure Front panel Top and bottom trim Front panel 20.0 mm Exhaust Fan Front panel 2 Top structure, I/O panel & dust filter Top panel Screw M3 x 5mm Trim installation 5 Screw M3 x 5mm Structure installation 2 Screw 5 x 0KT Fan installation 4 Chapter 3 26
TOP / FRONT PANEL ASSEMBLY Unpack components Provided a successful SECTION 2 assembly, now the next step is to install the top and front panels and their components. To start the assembly, you need to: - Take out the preassembled top and front panel out of the bag. - Remove both top and bottom front trim and set it aside for later use, additionally you need to remove security thumb screws on each side 2 Note: 2 you may discard the security screws as they are not used for the assembly Chapter 3 27
TOP / FRONT PANEL ASSEMBLY Create an L-Shape structure - Lift the front panel to an upright position, in order to make an L-Shaped structure, take out the cooling bracket and the two 20.0 mm red LED fans and set them aside for later use. - Make sure the front and top panels are properly aligned and tighten the two structure screws ( and 2) on each side of the L-Shape Structure. 2 9 Note: be careful as the front panel is not secured. Chapter 3 28
TOP / FRONT PANEL ASSEMBLY Secure the structure - Locate the two screw holes at the bottom of the L-Structure, place and tighten two ( and 2) structure screws. 9 2 screw them from the outside in Chapter 3 29
TOP / FRONT PANEL ASSEMBLY Secure the structure Once you have secured the two sides, you should have an L-shaped section ready for configuration. - Remove the structure screws, adjust the height of the top structure 2 9 screw them from the outside in Chapter 3 30
TOP / FRONT PANEL ASSEMBLY Secure the structure - Align the middle structure to the top and bottom structure, place and tighten four (, 2, 3, 4, 5, 6, 7 and 8) structure screws 8 6 4 2 9 7 5 3 Chapter 3 3
TOP / FRONT PANEL ASSEMBLY Secure the structure - Turn the L-Shape to an upright position and place it on top of section two build and remove filter Chapter 3 32
TOP / FRONT PANEL ASSEMBLY Secure the structure - Place and tighten four (, 2, 3 and 4) structure screws to join all sections 2 9 4 3 screw them from the outside in Chapter 3 33
TOP / FRONT PANEL ASSEMBLY Secure the structure - Place and tighten two ( and 2) structure screws to join the front and bottom panels, four (3, 4, 5 and 6) to join the middle and front panels and two (7 and 8) to join the middle and back panels 6 9 7 8 4 5 2 3 screw them from the outside in Chapter 3 34
TOP / FRONT PANEL ASSEMBLY Secure the structure - Place and tighten two ( and 2) structure screws to join the back and top panels and tighten two (3 and 4) structure screws to join the middle and top panels 2 3 4 9 screw them from the outside in Chapter 3 35
4 Trim / Side Panel Assembly www.riotoro.com/morpheus
TOP / FRONT PANEL ASSEMBLY Components required to build this section: IMAGE DESCRIPTION USE QTY Top and bottom trim Front panel Adjustable side panel Side panel 2 Magnetic filter Sidepanel 2 Mid tower configuration magnetic filter Side panel 2 Mini tower configuration magnetic filter Side panel 2 Thumb Screw 9*5mm (Red) Thumb Screw 9*5mm (Black) Side Panel Side Panel 4 4 Chapter 4 37
TRIM / SIDE PANEL ASSEMBLY Secure the trim to the structure - Start by positioning the bottom trim, place and tighten two ( and 2) trim screws, place the top trim, place and tighten three (3, 4 and 5) trim screws and finally place and tighten four (6, 7, 8 and 9) structure screws. 6 7 8 tighten structure screws from the inside 5 4 3 8 9 2 9 tighten trim screws from the outside Chapter 4 38
TRIM / SIDE PANEL ASSEMBLY Secure the trim to the structure - Slide the top and bottom trim into position, place and tighten eight (, 2, 3, 4, 5, 6, 7 and 8) trim screws 7 8 8 tighten structure screws from the inside 5 3 6 4 2 Chapter 4 39
TRIM / SIDE PANEL ASSEMBLY Install cooling bracket and filter - Position and snap on the cooling bracket on the front panel, from the inside of Morpheus and secure it into position with one structure screw and put the dust filter back on 9 screw it from the outside in Chapter 4 40
TRIM / SIDE PANEL ASSEMBLY Install side panels Now you are ready to finalize the assembly, should you want to install your components, this would be the right time to start. If you want to finalize the assembly you need to: - Take out each side panel out of the bag Chapter 4 4
TOP / FRONT PANEL ASSEMBLY Install side panels - Choose which color of side panel screws you want to us, place the side panel into position, place and tighten the side panel screws Note: Save the unused dust filter extension for a future use Chapter 4 42
5 Ready, setup, go www.riotoro.com/morpheus
READY, SETUP, GO Specifications GENERAL EXPANSION - Type: - Color: - Case Material: - With Power Supply: - Motherboard Compatibility: - Side Panel Window: - External 5.25" Drive Bays: - External 3.5" Drive Bays: - Internal 3.5" Drive Bays: - Internal 2.5" Drive Bays: - Expansion Slots: Convertible Tower Black Steel, ABS Plastic No ATX, microatx, Mini-ITX Yes 0 0 2 up to 4 up to 8 EXTERNAL PORTS - Top Panel: 2x USB Type-C 2x USB 3.0 x Headphone x Microphone COOLING SYSTEM - Front included: - Water Cooling Mounts: 2x 20.0 mm red LED front x 80.0 mm rear - Fan Mounts: Front: 2x 20.0 mm, 2x 40.0 mm or x 200.0 mm Rear: x 80.0 mm Top: 2x 20.0 mm or 2x 40.0 mm fans Bottom: 2x 20.0 mm or 2x 40.0 mm fansv Front: up to x 20.0 mm or x 240.0 mm radiator Top: up to x 20.0 mm or x 240.0 mm radiator Bottom: up to x 20.0 mm or x 240.0 mm radiator MAX DIMENSIONS - Max GPU Length: - Max CPU Cooler Height: - Max PSU Length: 300.0 mm 22.0 mm 220.0 mm Chapter 5 44
READY, SETUP, GO Motherboard Installation Morpheus comes with enough mounting standoffs for a full ATX or smaller form factor. 2 Remove the thumb screws, side panel and install the I/O shield Align the motherboards screw holes with the case standoff, attach the motherboard using the provided screws. Note: From inside, snap the I/O panel into the cutout in the rear of the case. Chapter 5 45
READY, SETUP, GO Connect the Front Panel Switches and LEDs Morpheus front panel switches, LEDs, and USB ports have wire leads that need to be attached to header pins the motherboard. Use your motherboard manual to locate the proper header pins and attach the right connectors. USB 2.0 POWER SW HDD LED POWER LED - USB 3.0 HD AUDIO RESET SW POWER LED + Tips: - LED leads are marked positive (+) or negative ( ) and must be connected to the corresponding pins on the motherboard. The orientation of the RESET SW and POWER SW connectors does not matter - Use your motherboard manual to correctly identify the front I/O connectors. Chapter 5 46
READY, SETUP, GO Power Supply Installation Morpheus is designed for quick PSU installation, simply put in place and tighten screws to the back panel. 2 Slide the PSU into position Tighten screws Chapter 5 47
READY, SETUP, GO SSD / HDD Installation Morpheus is designed with tool-less 3.5 (convertible to 2.5 ) and 2.5 drive bays. 2 Remove the tool-less bracket, attach the HDD into it Place the bracket with the drive in its original position. Chapter 5 48
READY, SETUP, GO Fan Installation - Front, top, bottom Morpheus is designed to provide superb cooling with the two included 20.0 mm fans. Optionally, two 40.0 mm fans or a single 200.0 mm fan can be installed instead (not included). 2 Attach the 20.0 mm or 40.0 mm fan to the fan bracket and secure it to Morpheus Attach the 200.0 mm fan to the front panel Chapter 5 49
READY, SETUP, GO Attaching the Case Fan Cables Morpheus comes with RGB controls directly on the I/O. Simply connect the cables to an RGB controller and use a SATA cable to power up the controller. Tips: - The RGB controller supports additional Quiet Storm RGB FAN - It is recommended to use Quiet Storm RGB fans with the RGB controller. - Please note that the included 80.0 mm fan is not RGB and should not be connected to the RGB controller. Note: connecting a NON-RGB RIOTORO FAN will potentially set the RGB lightning out of sync, connect any non RGB fan or third party fan to the motherboard fan headers if needed. Chapter 5 50
READY, SETUP, GO Water Cooling Installation - 20.0 mm or 40.0 mm options Morpheus is designed to provide superb fan cooling with two options, use a 20.0 mm or a 240.0 mm radiator in the front, top or bottom. 2 Remove the dust filters, attach the 20.0 mm radiator to the front, top or bottom. Remove the dust filters, attach the 40.0 mm radiator to the front, top or bottom. Note: top installation is only possible with ITX motherboards Chapter 5 5
READY, SETUP, GO GPU Installation In the mid tower configuration Morpheus allows for the installation of up to four (4) GPUs. 2 Remove the thumb screws and PCIe expansion covers/ Attach each GPU to the motherboard, place and tighten the thumbs screws. Chapter 5 52
6 Everything else www.riotoro.com/morpheus
EVERYTHING ELSE General Maintenace If you need to clean your gaming computer by doing more than wiping it down with a clean cloth, follow these instructions: - Complete power down of your machine, display and peripherals. - Disconnect all the power cables from the electrical outlet power strip. - Disconnect all peripherals from the machine. - Clean the machine with a soft, lint-free paper or cloth damped with mild soap and water. Note: Do not spray liquid directly onto the case, liquid could drip inside it and cause electrical shock. Chapter 6 54
EVERYTHING ELSE Important Safety Information In order to achieve maximum safety while using your MORPHEUS convertible case, we suggest that you adopt the following guidelines: - Should you have trouble operating the device properly and troubleshooting does not work, unplug the device and contact the RIOTORO hotline or go to www.riotoro.com for support. Do not attempt to service or fix the device yourself at any time. - Do not take apart the device (doing so will void your warranty) and do not attempt to operate it under abnormal current loads. - Keep the device away from liquid, humidity or moisture. Operate the device only within the specific temperature range of 0 C (32 F) to 40 C (04 F). Should the temperature exceed this range, unplug and switch off the device and let the temperature stabilize to an optimal level. Operational Safety: Research has shown that long periods of repetitive motion, improper positioning of your computer peripherals, incorrect body position, and poor habits may be associated with physical discomfort and injury to nerves, tendons, and muscles. Below are some guidelines to avoid injury and ensure optimum comfort while using your Morpheus convertible case. - Position: your keyboard, mouse and monitor need to be placed directly in front of you. Place your elbows next to your side, not too far away and your mouse within easy reach. - Height: Adjust the your chair and table so that the keyboard and mouse are at or below elbow height. - Support: Keep your feet well supported, posture straight and your shoulders relaxed. - Operation: relax your wrist and keep it straight. If you do the same tasks with your hands repeatedly, try not to bend, extend or twist your hands for long periods. Do not rest your wrists on hard surfaces for long periods. Use a wrist rest to support your wrist while gaming. - Customization: personalize your keyboard to suit your style of gaming in order to minimize repetitive or awkward motions while gaming. - Activity: Ensure that you et up, step away from your desk and do exercises to stretch your arms, shoulders, neck and legs; do not sit in the same position all day. - Safety: If you should experience any physical discomfort while using your Keyboard, such as pain, numbness,or tingling in your hands, wrists, elbows, shoulders, neck or back, please consult a qualified medical doctor vimmediately. Chapter 6 55
EVERYTHING ELSE LIMITED PRODUCT WARRANTY ("Limited Warranty") Limited Warranty. RIOTORO warrants the Product to be free from defects in materials and workmanship when used normally in accordance with the official documentation for the applicable Warranty Period from the date of retail purchase. Exclusions and Limitations. This Limited Warranty does not cover: - Software, including (without limitation) software added to the RIOTORO-branded hardware products or third-party software; - Non-RIOTORO branded products and accessories, even if packaged and sold with the Product; - Problems with and/or damage to the Product caused by using accessories, parts, or components not made by RIOTORO; - Damage caused by service (including upgrades and expansions) performed by anyone who is not officially acting as an employee, representative or sub-contractor of RIOTORO; - Claims arising from any unacceptable use or care of the Product; - Claims arising from external causes, including (without limitation), accidents, acts of God, liquid contact, fire or earthquake; - Products with a serial number or date stamp that has been altered, obliterated or removed; - Cosmetic damage, minor cosmetic abnormalities (including minor pixel abnormalities) and normal wear and tear, including (without limitation) scratches, dents and chips. For the latest and current terms of the Limited Product Warranty, please visit www.riotoro.com/warranty. Chapter 6 56
208 RIOTORO Inc. All rights reserved. RIOTORO, the RIOTORO logo, Morpheus logo and GPX00 are trademarks of RIOTORO Inc., Registered in the U.S. and other countries. All other trademarks are the property of their respectiveowners. Product may vary slightly from those pictured. Technical Support and Customer Service US & Canada -888-270-7090 support@riotoro.com cs@riotoro.com sales@riotoro.com Copyright 208 RIOTORO. All rights reserved. All trademarks are the property of their respective owners. Reproduction in whole or part without written permission is prohibited.
www.riotoro.com/morpheus