kitsound.co.uk Warning: To prevent possible hearing damage, do not listen at high volume levels for long periods. For your own safety, please be aware of your surroundings when using these earbuds. Not suitable for children. Your product and batteries must be recycled or disposed of properly. Please contact your local recycling centre for more information on proper disposal. All trademarks are acknowledged as the property of their respective owners. Unless otherwise stated their use does not imply that the trademark owner is affiliated with KitSound or endorses the products herein. COMET TRUE WIRELESS EARBUDS JB. 5546-a / Made in China. KitSound is a trademark of Kondor Limited, 2017. Christchurch, Dorset, BH23 4FL, UK USER MANUAL
Please read this manual carefully before use. Box contents KS Comet earbuds USB charge cable S/M/L silicone earbuds Carry case User manual Functions 1. Microphone 2. Micro USB charging port 3. LED indicator 4. Multi-function Button (MFB) 4 3 1 1 Instructions for use Charging the battery 1. Connect the micro USB end of the charging cable to the Micro USB charging port (2) and the standard USB end to a PC USB port or USB mains charger 2. The LED indicator (3) will be red whilst charging. It will turn blue after around 1 hour. The battery is now fully charged 3. If the LED indicator (3) flashes three times every 20 seconds, it means the battery is running low. Once this happens, you have about 5-10 minutes of use before the earbuds power off automatically Pairing the left and right channels 1. Start by holding down the MFB (4) on both earbuds at the same time for up to 10 seconds; you will hear an audible cue saying Power On and both earbuds will flash red and blue. Release the MFB (4) when this happens 2. Once connected you will hear a single beep on the left channel and a single beep on the right channel. Another cue will be heard stating Connected and then Left Channel and Right Channel confirmation checks will be performed 2 3
Battery information A rechargeable battery powers your device. Unplug the charger from the electrical plug and the device when not in use If left unused, a fully charged battery will lose its charge over time. We recommend a full charge twice a month to ensure battery integrity Please do not leave the device in hot or cold places, such as in a closed car in summer or winter conditions, as it will reduce the capacity and lifetime of the battery Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged Note: Bluetooth is a trademark of Bluetooth SIG, Inc. This product is in no way affiliated or endorsed by Bluetooth SIG Inc. Re-pairing or pairing new devices 1. Turn off Bluetooth connectivity on any previously paired devices 2. Follow the Pairing a wireless device instructions from step 1 Functionality Pairing a wireless device 1. Once the ear units have paired, you will hear a single beep in the left channel and an audible cue stating the ear unit is pairing. Only the left unit will be flashing red and blue during this time 2. Turn your ios, Android, or Windows device s Bluetooth ON and search for new devices (check your device s manual if you re unsure how to do this) 3. Select KS Comet Buds from list of found devices 4. If asked for a passcode, enter 0000 or 1234 and the earbuds will then be connected to your device 5. After pairing successfully, the LED indicator (3) will flash blue and you will hear a double beep and pairing successful ; you can then answer the phone or listen to your music 6. The next time the earbuds are switched on, they will automatically search for and attempt to connect to the last paired device Power on Power off To answer a call To end call Redial Play/Pause Hold the MFB (4) down for 3 seconds Hold the MFB (4) down for 5 seconds Press the MFB (4) and immediately release Press the MFB (4) and immediately release Press the MFB (4) twice quickly to redial your most recent call Press the MFB (4) and immediately release 4 5
Care for your Comet Please DON T: Get the Comet wet Drop the Comet as this will invalidate your warranty Open up the Comet. There are no user serviceable parts inside Expose the Comet to extreme temperatures or rapid changes of hot to cold or vice versa Charge the Comet if the headset has got wet Please DO: Clean the Comet with a soft dry cloth and no detergents Specifications Works with Bluetooth V4.1 Wireless connectivity distance Frequency response Talk time Play time Charge time Standby time Battery type Battery capacity up to 15 m 50 Hz 20 khz up to 5 hours up to 4 hours up to 2 hours up to 125 hours LiPo 50 mah 6 7
Troubleshooting If you cannot connect the earbuds to your device, please try the following: Ensure that the earbuds are charged, switched on, paired with and connected to your device Check the earbuds are within 15 metres (50 feet) of your device and that there are no obstructions (such as walls or other electronic devices) between the earbuds and the device The earbuds can only pair to one device at a time, so please ensure there are no conflicting wireless devices trying to connect to the earbuds If the earbuds will not switch off, you can reset them back to normal by putting them on charge. If you receive an intermittent signal, please ensure the earbuds are fully charged before continuing use If you do not use the earbuds for longer than 3 minutes whilst not connected to a device, they will automatically power off to conserve power Hereby, Kondor Ltd declares that the radio equipment type, KSCOMBUD Comet Wireless Earbuds, is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://kondor.co.uk/product-documents. We hope you ve now got all the information you need to get started, but if you re having problems with anything, please feel free to contact us at: support@kitsound.co.uk 8 9
Please do not attempt to open this product. There are no user serviceable parts inside, in particular if your product has an embedded, non-replaceable battery, do not attempt to access or remove the battery as this may cause personal injury and will damage the product. Making any attempt to open the product or carry out repair voids any and all warranties. We apologise for any inconvenience caused by minor inconsistencies in these instructions, which may occur as a result of product improvement and development. 10