CHAPTER 2 This chapter describes new and changed JTAPI information for Cisco Unified Communications Manager, release 9.1(1) and features supported in the previous releases. It contains the following sections: Cisco Unified Communications Manager Release 9.1(1), page 2-1 Features Supported in Previous Releases, page 2-1 For more information, go to the Programming Guides website at http://www.cisco.com/en/us/products/sw/voicesw/ps556/products_programming_reference_guides_lis t.html. Cisco Unified Communications Manager Release 9.1(1) 9.1(1): CTI Remote Device for JTAPI, page 3-36 Features Supported in Previous Releases This section describes the features supported in the releases prior to 9.1(1) and contains the following sections: Cisco Unified Communications Manager Release 9.0(1), page 2-2 Cisco Unified Communications Manager Release 8.6(1), page 2-2 Cisco Unified Communications Manager Release 8.5(1), page 2-2 Cisco Unified Communications Manager Release 8.0(1), page 2-2 Cisco Unified Communications Manager Release 7.1(3), page 2-3 Cisco Unified Communications Manager Release 7.1(2), page 2-3 Cisco Unified Communications Manager Release 7.0(1), page 2-3 Cisco Unified Communications Manager Release 6.1, page 2-4 Cisco Unified Communications Manager Release 6.0, page 2-5 Cisco Unified Communications Manager Release 5.1, page 2-5 Cisco Unified Communications Manager Release 5.0, page 2-5 2-1
Features Supported in Previous Releases Chapter 2 Cisco Unified Communications Manager Release 9.0(1) 9.0(1): Cius Persistency, page 3-27 CTI Remote Device for JTAPI, page 3-36 E911 Teleworker, page 3-51 Hunt list Connected Number, page 3-64 Native Queuing, page 3-85 URI Dialing, page 3-158 Cisco Unified Communications Manager Release 8.6(1) 8.6(1): Account lockout, page 3-1 EnergyWise Deep Sleep Mode, page 3-52 FIPS Compliance, page 3-56 Password expiry, page 3-94 New JTAPI x64 client for 64-bit operating systems. Cisco Unified Communications Manager Release 8.5(1) 8.5(1): Agent Greeting section on page 3-1 API for Exposing Built-In-Bridge Status section on page 3-3 Play Zip Tone section on page 3-94 Single Sign-On section on page 3-122 Support for VMware section on page 3-137 Support for VMware section on page 3-137 Cisco Unified Communications Manager Release 8.0(1) 8.0(1): Call Control Discovery, page 3-8 Call Pickup, page 3-10 CallFwdAll Key Press Notification, page 3-13 End to End Call Tracing, page 3-52 2-2
Chapter 2 Features Supported in Previous Releases Extension Mobility Cross Cluster, page 3-54 External Call Control, page 3-55 Hunt List, page 3-63 isac Codec, page 3-68 Secured Monitoring and Recording, page 3-117 Support for Cisco Unified IP Phone 6901, page 3-134 Support for 100+ Directory Numbers, page 3-136 Support for VMware, page 3-137 Verification Involving PSTN Reachability, page 3-159 Cisco Unified Communications Manager Release 7.1(3) 7.1(3): Terminal and Address Capability Settings, page 3-140. Cisco Unified Communications Manager Release 7.1(2) 7.1(2): Component Updater, page 3-30 Direct Transfer Across Lines, page 3-39 Drop Any Party, page 3-49 IPv6 Support, page 3-67 Join Across Lines or Connected Conference Across Lines, page 3-70 Logical Partitioning, page 3-79 Message Waiting Indicator Enhancement, page 3-82 Park Monitoring and Assisted DPark Support, page 3-89 Interface Changes, page 3-135 Swap or Cancel and Transfer or Conference Behavior, page 3-139 Cisco Unified Communications Manager Release 7.0(1) This section describes the new and changed features in Cisco Unified Communications Manager from Release 6.1 to Release 7.0(1) and Cisco Unified JTAPI enhancements. It has the following sections: Call Pickup, page 3-10 Calling Party Normalization, page 3-13 Click to Conference, page 3-28 Do Not Disturb Reject, page 3-48 2-3
Features Supported in Previous Releases Chapter 2 Extension Mobility Username Login, page 3-55 Java Socket Connect Timeout, page 3-68 Join Across Lines with Conference Enhancements (SCCP and SIP), page 3-75 Locale Infrastructure Development, page 3-78 selectroute() with Calling Search Space and Feature Priority, page 3-119 Note Cisco Unified Communications Manager Release 7.0(1) does not support the following IPv6 related methods: cansupportipv6() setprovideropenretryattempts (int retryattempts) getprovideropenretryattempts() getipaddressingmode() (available on CiscoMediaTerminal and CiscoRouteTerminal interfaces) register(java.net.inetaddress address, int port, CiscoMediaCapability [] capabilities, int[] algorithmids, java.net.inetaddress address_v6, int activeaddressingmode) register(ciscomediacapability [] capabilities, int[] int registration Type, int[] algorithmids, int activeaddressingmode) getterminals() (available on new interface CiscoProviderTermCapabilityChangedEv) getaddressingmodeformedia() getcallingpartyipaddr_v6() (available on CiscoCallCtlConnOfferedEv and CiscoRouteEvent interfaces) CTIERR_IPADDRMODEMISMATCH CTIERR_DYNREG_IPADDRMODE_MISMATCH hasipv6capabilitychanged() CiscoTerminal.IP_ADDRESSING_MODE_IPv4 CiscoTerminal.IP_ADDRESSING_MODE_IPv6 CiscoTerminal.IP_ADDRESSING_MODE_IPv4_v6 CiscoTerminal.IP_ADDRESSING_MODE_Unknown CiscoTermRegistrationFailedEv.IP_ADDRESSING_MODE_MISMATCH Note For the features, Join Across Lines, Do Not Disturb-Reject, and Calling Party Normalization, each Cisco JTAPI must be upgraded to a version that supports these features. Additionally, if you are upgrading from Release 5.1 and you use Join Across Lines, the Conference Chaining feature must not be enabled or used until all applications are either upgraded to a version compatible with the new unified CM version. Also, you should verify that the applications are not impacted by the Conference Chaining feature. Cisco Unified Communications Manager Release 6.1 This section describes the new and changed features in Cisco Unified Communications Manager from Release 6.0 to Release 6.1 and Cisco Unified JTAPI enhancements. It has the following sections: Certificate Download API Enhancement, page 3-14 Intercom Support for Extension Mobility, page 3-66 Join Across Lines, page 3-69 2-4
Chapter 2 Features Supported in Previous Releases Cisco Unified Communications Manager Release 6.0 This section describes the new and changed features in Cisco Unified Communications Manager, Release 6.0 and Cisco Unified JTAPI enhancements. It has the following sections: Arabic and Hebrew Language Support, page 3-3 Calling Party IP Address, page 3-11 CiscoRTPHandle Interface on Cisco RTP Events, page 3-24 Cisco Unified IP 7931G Phone Interaction, page 3-20 Conference Chaining, page 3-34 Directed Call Park, page 3-45 Do Not Disturb, page 3-46 Forwarding on No Bandwidth and Unregistered DN, page 3-60 Hold Reversion, page 3-63 Intercom, page 3-65 Multilevel Precedence and Preemption Support, page 3-85 Noncontroller Adding of Parties to Conferences, page 3-88 Recording and Silent Monitoring, page 3-100 Secure Conferencing, page 3-109 Translation Pattern Support, page 3-148 Version Format Change, page 3-158 Voice MailBox Support, page 3-159 Cisco Unified Communications Manager Release 5.1 This section describes the new and changed features in Cisco Unified Communications Manager, from Release 5.0 to Release 5.1 and Cisco Unified JTAPI enhancements. It has the following sections: Call Forward Override, page 3-9 Join Across Lines (Only SCCP), page 3-69 New Error Code in CiscoTermRegistrationFailedEv, page 3-88 Star (*) 50 Update, page 3-131 Cisco Unified Communications Manager Release 5.0 This section describes the new and changed features in Cisco Unified Communications Manager, from Release 4.x to Release 5.0 and Cisco Unified JTAPI enhancements. It has the following: Auto Updater for Linux, page 3-4 Call Select Status, page 3-10 Command Line Invocation, page 3-30 Hairpin Support, page 3-61 2-5
Features Supported in Previous Releases Chapter 2 Half-Duplex Media Support, page 3-61 JRE 1.2 and JRE 1.3 Support Removal, page 3-76 JTAPI Client Installer, page 3-76 JTAPI Version Information, page 3-77 Linux and Windows Installation, page 3-77 Network Alerting, page 3-87 Partition Support, page 3-91 QoS Support, page 3-97 Secure Real-Time Protocol Key Material, page 3-110 Silent Install, page 3-122 SIP 3XX Redirection, page 3-124 SIP REFER or REPLACE, page 3-127 SIP Phone Support, page 3-125 Superprovider and Change Notification, page 3-132 Terminal and Address Restrictions, page 3-141 Transport Layer Security (TLS), page 3-149 Unicode Support, page 3-155 2-6