Xitanium LED driver Datasheet Xitanium LED drivers linear LV isolated Enabling future-proof LED technology Xitanium LED drivers are designed to operate LED solutions for general lighting applications such as linear lighting, as well as downlighting and spot/accent lighting. High reliability underpinned by 5 year warranty, enhanced by specific features that protect the connected LED module, e.g. hot wiring, reduced ripple current and thermal derating. Most drivers feature central D operation. In the coming years LEDs will continue to increase in efficiency, creating generation and complexity challenges for OEMs. With Xitanium LED drivers, flexibility in luminaire design is assured thanks to an adjustable output current. Application-oriented operating windows offer the flexibility required to provide the stable lumen output and light quality levels that lighting specifiers and architects demand. And the adjustable output current also enables operation of various LED P solutions from different manufacturers. enefits Features Application High reliability underpinned by Simpler approval process and easy design-in Offices and industry 5 year warranty Future-proof flexibility - Operating windows - output current can be adjusted via the Philips MultiOne application-oriented operating configurator ('TD' drivers) or with a resistor windows enable LED generation outside the driver and complexity management ompatibility - can also be used Reduced ripple current and thermal derating for increased reliability for other manufacturers' Power ratings: 36W, 55W and 75W modules or OEMs' own P DALI diable & prograable, 1-10V designs Flicker and noise free diing with all Touch and DALI LED July 2015 drivers due to amplitude diing (AM) diable, and fixed-output versions All T5 form factors but various lengths
Electrical input data minal input voltage 220...240 Vac performance range minal input frequency 60 Hz minal input current 0.12 A Input voltage 220 Vac minal input power 26.5 W Power factor >= 0.9 Total harmonic distortion <= 30 @ full load. See graph. Efficiency 85 @230V @ full load Input voltage A 202...233 Vac Operational range Input frequency A 54...66 Hz Maximum permissible range Regulation method onstant urrent Output voltage 28...40 Vdc Output voltage max. 60 V Peak voltage at open load Output current 0.541...0.599 A Full output current setting Output current tolerance ±5 Output current ripple LF <= 30 Ripple = peak / average Output power 15.1...24 W Full output ontrol method Fixed @230V @ full load @230V @ full load @ full load. See graph. Electrical output data Electrical data controls input Logistical data Product name Order code Logistic code 12N 9290 009 58206 EAN3 Pieces per box 2/8 20
Wiring & onnections Input wire cross-section 0.2...1.5 2 WAGO250 (3.5 ), solid wire 16...24 AWG WAGO250 (3.5 ), solid wire Input wire strip length 8.5...9.5 Output wire cross-section 0.2...1.5 2 WAGO250 (3.5 ), solid wire 16...24 AWG WAGO250 (3.5 ), solid wire Output wire strip length 8.5...9.5 Maximum cable length 1000 3/8 Total length of wiring including LED module, one way
Dimensions and weight Length (A1) 150 Width (1) 40 Height (1) 28 Fixing hole diameter (D1) 4.2 Fixing hole distance (A2) 136 Weight 78 gram Operational temperatures and humidity Ambient temperature -20...+50 Tcase-max 75 Maximum temperature measured at Tc-point Tcase-life 65 Measured at Tc-point Maximum housing temperature 130 In case of a failure Relative humidity 10...90 n-condensing 4/8
Storage temperature and humidity Ambient temperature -25...+85 Relative humidity 5...95 n-condensing Driver lifetime 50,000 hours Measured temperature at Tc-point is Tcase-life. Mains switching cycles > 50,000 switches See Design-in guide for detailed explanation Remark Set output current (AO) See Design-in guide. Default output current: <= 570 ma LED module temperature derating (MTP) onstant Lumen Over Lifetime (LO) D emergency diing (DemDIM) orridor mode Energy metering Diagnostics Remark Lifetime Maximum failures = 10 Prograable features Features Open load protection Yes Short circuit protection Yes Over power protection Yes Hot wiring Suitable for fixtures with protection class I Automatic recovering per IE60598 ertificates and standards Approval marks / HEE / K Ingress Protection classification 20 5/8
Inrush current Inrush current Ipeak 7 A Input voltage 220V Inrush current Twidth 70 µs Input voltage 220V, measured at 50 Ipeak Drivers / M 16A type <= 80 pcs M Rating Relative number of LED drivers 10A 63 13A 81 16A 100 (stated in datasheet) 20A 125 25A 156 10A 104 13A 135 16A 170 20A 208 25A 260 Driver touch current Typical touch current 0.7 ma peak Acc. IE61347-1. LED module contribution not included Mains surge iunity (diff. mode) 1 kv Acc. IE61000-4-5. 2 Ohm, 1.2/50us, 8/20us Mains surge iunity (co. mode) 2 kv Acc. IE61000-4-5. 12 Ohm, 1.2/50us, 8/20us Surge iunity 6/8
Graphs Operating window Power factor versus output power Efficiency versus output power 7/8
2015 Koninklijke Philips Electronics N.V. All rights reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Data subject to change. Date of release: July 9, 2015 www.philips.com/technology