D/N WDR MP HD Fast Dome IP Camera IPS7224M/8M, IPS5204S/8S, IPS5184S/8S Instr uction Manual
IMPORTANT SAFEGUARDS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. GRAPHIC SYMBOL EXPLANATION The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the unit. CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
PREFACE IPS7224M/7228M, IPS5204S/5208S, IPS5184S/5188S with High resolution of HD/Full HD offer significant enhancement and refinements to bring you the most innovative surveillance solutions. IPS7224M/7228M, IPS5204S/5208S, IPS5184S/5188S are the leading product in the industry offering the most advanced features such as 22X/20X/18X optical zoom lens, Digital Zoom, Wide Dynamic Range, Digital Noise Reduction, High Light Compensation and Digital Image Stabilizer. IPS7224M/7228M, IPS5204S/5208S, IPS5184S/5188S measure only 145mm in diameter and is capable of making 360 degrees continuous rotation with a speed range of 0.15 to 360 degrees per second, ensures direct and accurate target positioning. When required the dome can be quickly spun through 180 degrees, an important feature when something passes directly under the camera. Up to 128 preset positions can be programmed and recalled with an accuracy of 0.25 degrees. Can be set to auto-sequence mode, perform automatic monitoring presets. Each Fast Dome has 6 alarm inputs can drive the dome to any position in under second. IPS7224M/7228M, IPS5204S/5208S, IPS5184S/5188S H.264 AVC (Advanced Video Coding) video compression engine provides high video quality, SXGA/1080P resolution, bandwidth efficiency, and real-time streaming. The cutting edge of H.264 AVC main profile encoding technology can provide better compression rate and superior video quality at 56 Kbps to 3 Mbps bit rate. Dual streaming design, JPEG and H.264 AVC allow to stream video at low bandwidth (Internet) and high bandwidth (LAN) for optimizing video quality. Low latency design for both Intranet and Internet is a key factor of operating PTZ. Four PTZ web interfaces including lens absolute positioning are designed for easy-to-use purpose.
FEATURES Auto Focus Lens Build-in 22X optical zoom lens with focal length 4.7~103.4mm [22X Model] Build-in 20X optical zoom lens with focal length 4.7~94mm [20X Model] Build-in 18X optical zoom lens with focal length 4.7~84.6mm [18X Model] 1280x1024(SXGA)[22X Model] / 1920x1080(1080P)[20X/18X Model] Horizontal TV lines Automatic Iris Control Privacy Mask 360 continuous rotation Up to 128 programmable preset positions Preset positions auto scanning High speed rotation and tilt, speed range varies from 0.15 /sec ~ 360 /sec 180 Horizontal Instant Flip 6 alarm inputs, 1 alarm output for each Fast Dome IP Camera Build in high resolution DSP color camera: 1. Color / Mono Switch (IR Cut Filter) In Color Out Mono Auto Switch from color to mono when light drops below 3 lux Schedule Switch from color to mono by time setup 2. 0.07Lux at F1.6(Color) ; 0.03Lux at F1.6(Mono) [22X Model] 0.5Lux/1.7Lux (1/30sec, 50%, High Sensitivity mode ON/OFF), 3. White Balance Control : Auto Correction, Auto Tracking, Manual 4. Wide Dynamic Range : On(60dB)/Off 5. Back Light Compensation : On/Off 6. Auto Gain Control : 0dB ~ 36dB 7. Brightness Adjustment 8. Flickerless : On/Off Power supply options : 100 ~ 240VAC or 24VAC True H.264 AVC/MPEG-4 part 10 real-time video compression In live monitoring: SXGA(1280x1024), D1(720x480), CIF(352x240) [22X Model], 1080P(1920x1080), 720P(1280x720), D1(720x480), CIF(352x240) [20X/18X Model] Full duplex H.264 AVC and JPEG streaming
WARNINGS & CAUTIONS Please read the manual before attempting installation or operation 1. Please be aware to the warnings and cautions notice. 2. Don't use any chemical detergent to clean the machine surface, use a damp cotton cloth only. Regularly clean the dome cover to assure proper focus ability. 3. Please install the Fast Dome in a dry area, water and high humidity may cause damage on internal parts. External housing should be used for outdoor installation. 4. Please use parts supplied by the manufacturer only, any unqualified part using in the equipment may violate the warranty. 5. Avoid installing the equipment in an unstable area. Make sure the area is firm and stable. Falling equipment may injure personnel and damage the equipment. 6. Do not install the equipment near any flammable gas. Violation may cause fire or injury. 7. Avoid running video cable and signal cable through or passing interference sources such as video waves, broadcast station, power generator, elevator motor or high voltage area... etc. Violation may cause interference. 8. Make sure the power cable is properly fixed. Un-suitably fixed cable may cause serious short circuit or fire. 9. Correct cable connection is important. Do not place any object on the connection cable and change the cable if there is damage on cable. Violation may cause short circuit, fire and injury. 10. Make sure ground is well connected to avoid damage caused by lightning. 11. Do not put any foreign objects inside the equipment and do not spray any liquid on equipment. This will avoid short circuit damage. 12. Do not touch power connection with wet hands to avoid short circuit or electricity shock. 13. Do not apply smash-force on the equipment. Violation may cause damage. 14. Do not install the equipment in a location that may expose the equipment directly to sunlight. Violation may cause colour fading or damage. 15. Do not install the equipment in high temperature or low temperature environment to avoid damage. The normal operational temperature is between -10 C ~ +50 C. 16. Fast Dome contains high sensitive electric parts inside. Do not try to repair them without qualified personnel. 17. Turn off the power immediately and contact the technician when the following occurs: A. Damage on power cable or plug. B. Water leak into the equipment. C. Fast Dome can not be operated normally. D. Equipment falling on ground or damage on external case. E. Unusual occurrence. 18. Warning: Do not try to repair the equipment. Only a qualified technician may disassemble and repair the equipment. Shut off the power before disassemble the equipment and don't put power on unless the case is completely assembled.
STRUCTURAL ELEMENT Dome Cover Camera Case Bottom Chassis Power In Jack (AC100 ~ 240V) Power In Jack (AC24V) Video Out Jack Alarm In/Out connector RJ45 Network Connector Reset
Fast Dome Connection Jack and Cable Requirement AC100~240V Power Cable AC24V Power Cable Video Signal Cable Alarm In/Out Cable CAT5 Network Cable To Monitor To PIR 1. AC100 ~ 240V Power Cable 2. AC24V Power Cable Recommended Cable: Copper Wire (AWG) Length of Cable (approx.) (m) (ft) #24 (0.22mm 2 ) 20 65 #22 (0.33mm 2 ) 30 100 #20 (0.52mm 2 ) 45 160 #18 (0.83mm 2 ) 75 260 Accessory Connector Information PIN Power 4 3 1 2 AC24V Live (Black) AC24V Neutral (White) 2 1 3 4 Earth (Green) NA Assemble the Cable with the Accessory Connector a. Strip back the cable jacket approx. 3mm and separate the individual conductors. 3mm UP Insert Electrical Wire Contact
b. Prepare the individual conductors for clamping. After clamping the contacts, push them into the proper holes in the accessory connector of this camera until they snap in place. UP Contact CAUTIONS : CONNECT THIS TO 24V AC CLASS 2 POWER SUPPLY ONLY. 3. Video Out BNC Jack Video Signal Output CVBS 1.0Vp-p 75Ω BNC Recommended Data Cable: 5C2V 4. Alarm In/Out Connector Each fast dome contains 6 alarm inputs and 1 alarm output. Alarm Input Voltage: 5.6V max. Alarm Output: 1A 24VDC Recommended Data Cable: UL26 AWG 80 C 300V 6. Network Connector RJ45 LAN : 10/100Mbps Recommended Data Cable : CAT5 UL24 AWG 80 C 300V Alarm Out: NO COM. Alarm In: GND IN6 IN5 IN4 IN3 IN2 IN1 (Gray) (White) (Black) (Red) (Green) (Orange) (Blue) (Yellow) (Violet)
INSTALLATION Indoor Installation Structural Drawing Embedded Mounting Attached Mounting Micro SD/SDHC Socket
Embedded Mounting (False Ceiling) Step 1 Ceiling Preparation Drill a 3/32" (2.4mm) hole at the center of the chosen area. Use a pencil and a compasses to mark a circle 6.7" (170mm) in diameter and cut the circle. Step 2 The Ceiling Ring 120 120 120 204mm Attach the ring to ceiling Tighten the three tapping screws into the ceiling or three machine screws with three screw nuts 93mm Ring size and screw location Step 3 The Fix Ring Turn the dome cover counter clockwise Separate the dome cover from camera Put on the three L shape screw nuts Attach fix ring with screw nuts Tighten the three black screws into the screw nuts
Step 4 Connection VIDEO OUT Connect video signal cable Alarm Out: NO (Gray) COM. (White) Alarm In: GND (Black) IN6 (Red) IN5 (Green) IN4 (Orange) IN3 (Blue) IN2 (Yellow) IN1 (Violet) Connect alarm cable LAN Connect Network cable Step 5 Install Camera Body and Decoration Ring and Dome Cover Put camera body and the fix ring into the hole Turn the camera body clockwise to tight position Tighten three black screws Put on decoration ring Turn the ring clockwise to tight position Attach dome cover to camera body Turn the dome cover clockwise to tight position Note : After dome cover is attached, use glass-cleaning cloth to clean dome cover. Unclean dome cover may affect camera performance.
Attached Mounting (Fixed Ceiling) Step 1 Fix The Base Turn the dome cover counter clockwise Separate the dome cover from camera Untighten the two screws from base Turn the camera cover clockwise Separate the camera body to the base Set all of control cable on middle position and through the hole of ceiling. Install rubber cover on the cable outlet of base, base, or set control cable on the cable outlet of base. Attach base to ceiling 6.5 120? 47 47 120? 47.0 27.75 Tighten the three tapping screws into the ceiling 8.93 18 Base size and screw location Step 2 Attach the Camera Body and Base Attach camera body to base Notice: position connector is correct or not. Turn camera body counter clockwise to tight position Tighten the two screws to fix the camera body
Step 3 Connection VIDEO OUT Connect video signal cable Alarm Out: NO/NC (Gray) COM. (White) Alarm In: GND (Black) IN6 (Red) IN5 (Green) IN4 (Orange) IN3 (Blue) IN2 (Yellow) IN1 (Violet) Connect alarm cable LAN Connect Network cable Step 4 Install Dome Cover Put on dome cover to camera body Turn dome cover clockwise to tight position Note : After dome cover is attached, use glass-cleaning cloth to clean dome cover. Unclean dome cover may affect camera performance. Wall Mounting (Fixed Bracket) Step 1 Fix The Bracket Fix bracket first, and pull control cable and power cable from bracket cable outlet. Turn the dome cover counter clockwise Separate the dome cover from camera Untighten the two screws from base
Turn the camera cover clockwise Separate the camera body to the base Set all of control cables on the middle position, and install rubber cover on the cable outlet of base Step 2 Connection VIDEO OUT Connect video signal cable Alarm Out: NO/NC (Gray) COM. (White) Alarm In: GND (Black) IN6 (Red) IN5 (Green) IN4 (Orange) IN3 (Blue) IN2 (Yellow) IN1 (Violet) Connect alarm cable LAN Connect Network cable Step 3 Fix The Base Set base on the installation position of bracket, and arrange all of control cables in the inside bracket Tighten the three tapping screws into the bracket
Step 4 Attach the Camera Body and Base Attach camera body to base Notice: position connector is correct or not. Turn camera body counter clockwise to tight position Tighten the two screws to fix the camera body Step 5 Install Dome Cover Put on dome cover to camera body Turn dome cover clockwise to tight position Note : After dome cover is attached, use glass-cleaning cloth to clean dome cover. Unclean dome cover may affect camera performance.
Installation Micro SD/SDHC card, please follow instruction as below: 1. Push the cover of Micro SD/SDHC socket right for unlocking. 2. Pull the cover of the Micro SD/SDHC socket up. 3. Place Micro SD card on the socket. Make sure to face the card down. Micro SD 4. Lock the cover of the Micro SD card by flip the cover. Press the cover down and push left for locking.
SPECIFICATION General Model Power Supply Power Consumption Image Pick-up Device effective Pixels Total number of pixel Scanning System Video Output Minimum illumination Ambient Operation Temperature Operating Humidity Dimensions Weight Pan & Tilt Panning Range Panning Mode Panning Speed Tilting Range Tilting Mode Tilting Speed Lens Zoom Ratio Focal Length Minimum Aperture Ratio Minimum Object Distance Iris Range Angle Field of View Main Function Control Function Digital Zoom Ratio Zoom Speed Focus Speed Auto Focus Iris Day & Night Electronic Image Stabilizer Sense Up (Slow Shutter) Electronic Shutter Speed Exposure Mode Back Light Compensation Digital Wide Dynamaic Range Sharpness White Balance Auto Gain Control 3D Digital Noise Reduce Auto Mode Privacy Function Digital Effect Alarm Input/ Output 22X D/N WDR HD FAST DOME IP CAMERA IPS7224M AC24V 15W Panasonic 1/3" Mega-Pixel MOS Sensor 1280(H) x 1024(V) = 1,310,720(pixel) 1376(H) x 1070(V) = 1,472,320(pixel) Progressive Scan CVBS 1.0Vp-p/ 75ΩBNC Color: 0.07Lux at F1.6, Mono: 0.03Lux at F1.6-10 C ~ +50 C (-41 F ~ 122 F) 0% ~ 90% 245mm(H) x 155mm(V) 2300g 360 Endless Manual, Auto, Manual Position, Sequential Position Manual Approx. 0.15 /s ~ 120 /s 8Steps, 16Steps/ Preset Approx. 1 /s ~ 255 /s, Alarm Trigger Speed 360 /s -6 ~ +96 Manual, Auto, Manual Position, Sequential Position 22X Optical Zoom 4.7mm ~ 103.4mm 1 : 1.6 (Wide) ~ 3.1(Tele) 1.5m (Tele) F1.6 ~ 360, Close Wide: 54.6 (H) 42.3 (V) / Tele: 2.70 (H) 2.10 (V) Pan and Tilt/ Zoom and Focus/ Iris and ICR/ 128 Preset Position/ Home Position x10 Slow/ MID./ Fast Selectable [Fast: Approx. 4.0 Second (Tele to Wide) in Manual Mode] Slow/ MID./ Fast Selectable [Fast: Approx. 4.0 Second (Far to Near) in Manual Mode] Auto/ One Push Focus ALC (Adjustable Output Target Level)/ Manual Day/ Night/ Auto/ Schedule Off/ On x1 ~ x255 1/30 ~ 1/120,000 ALC/ ELC BLC/ HSBLC Off/ Low/ Middle/ High Adjustable ATW/ AWC/ Manual(1700K~11000K) Off/ Low/ Middle/ High Off/ Low/ Middle/ High Off/ AUTO/ SEQ/ TOUR Off/ On (Up to 24 area) OFF/ V-Flip/ Mirror/ Rotate IPS7228M AC100~240V Manual Approx. 0.15 /s ~ 120 /s 8Steps, 16Steps/ Preset Approx. 1 /s ~ 255 /s, Alarm Trigger Speed 360 /s 6 input(ttl 5Vdc), 1 Output(0.5A 120Vac, 1A 24Vac) Design and specification are subject to change without notice.
Network Function Video compression Resolution Frame rate Video streaming Video bitrate Security Users OSD Alarm Function CPU, memory Web PTZ control PTZ preset scheduling Mintenance Network Interface Client PC requirement Network protocols Mobile phone and PDA System integration CMX Video display OS Two-way Audio H.264, Motion JPEG SXGA(1280x1024), D1(720x480), CIF(352x240) H.264: up to 30FPS at SXGA(1280x1024) Motion JPEG: up to 30FPS at D1(720x480) RTP/HTTP, RTP/TCP, RTP/UDP, Multicast 128Kbps ~ 5Mbps Frame rate and bitrate controllable on-the-fly VBR/ CBR/ GOP supported Base64 HTTP encryption Multiple user access levels with password protection 10 user accounts available 8 simultaneous users Text overlay for date, time, and camera name Image upload over FTP and E- mail by alarm/ motion detection Embedded SoC ARM11, 528MHz, 256MB DDR2, 256MB flash memory Pan, tilt, zoom in/ out, absolute position, and video-click-n-move Yes, via web interface Firmware update via HTTP Firmware available at web site 10Mbps / 100Mbps, RJ-45 OS : Windows 2000, Windows XP, Windows Vista, Windows 7 Browser : Windows Internet Explorer 6, 7, 8 CPU : Intel Pentium 4 1.8GHz or above RAM : 1GB or above, Independent Display Card IP, TCP, UDP, HTTP, SMTP, NTP, DDNS, UPnP, FTP, ARP, DHCP, PPPoE, DNS, RTSP, RTCP, Telnet, ONVIF, ICMP, IGMP iphone, ipad and Android support ONVIF & LILIN HTTP API CMX HD3.6 support LILIN Universal ActiveX & LILIN Java Applet Embedded Linux 2.6.32 G.711 Design and specification are subject to change without notice.
General Model Power Supply Power Consumption Image Pick-up Device effective Pixels Total number of pixel Scanning System Video Output Minimum illumination Ambient Operation Temperature Operating Humidity Dimensions Weight Pan & Tilt Panning Range Panning Mode Panning Speed Tilting Range Tilting Mode Tilting Speed Lens Zoom Ratio Focal Length Minimum Aperture Ratio Minimum Object Distance Iris Range Angle Field of View Main Function Control Function Digital Zoom Ratio Zoom Speed Focus Speed Auto Focus Iris Day & Night Electronic Image Stabilizer Sense Up (Slow Shutter) Electronic Shutter Speed Exposure Mode Back Light Compensation Sharpness White Balance Auto Gain Control Digital Noise Reduce Auto Mode Privacy Function Digital Effect Alarm Input/ Output Schedule Setting 20X D/N WDR HD FAST DOME IP CAMERA IPS5204S AC24V 15W 1/2.8" Type Exmor CMOS Sensor 2096(H) x 1561(V) = 3,269,760(pixel) 2144(H) x 1588(V) = 3,404,672(pixel) Progressive Scan CVBS 1.0Vp-p/ 75ΩBNC 0.5Lux (1/30sec, 50%, High Sensitivity mode ON) 1.7Lux (1/30sec, 50%, High Sensitivity mode OFF) ICR-ON Mode 0.095Lux (1/30sec, 50%, High Sensitivity mode ON) ICR-ON Mode 0.3Lux (1/30sec, 50%, High Sensitivity mode OFF) -10 C ~ +50 C (-41 F ~ 122 F) 0% ~ 90% 245mm(H) x 155mm(V) 2300g 360 Endless Manual, Auto, Manual Position, Sequential Position Manual Approx. 0.15 /s ~ 120 /s 8Steps, 16Steps/ Preset Approx. 1 /s ~ 255 /s, Alarm Trigger Speed 360 /s -6 ~ +96 Manual, Auto, Manual Position, Sequential Position 20X Optical Zoom 4.7mm ~ 94.0mm 1 : 1.6 (Wide) ~ 3.5(Tele) 10mm(WIDE end) ~ 0.8m(TELE end) F1.6 ~ 360, Close Approx. 55.4 (WIDE end), approx. 2.9 (TELE end), 1080p mode Approx. 37.6 (WIDE end), approx. 2.0 (TELE end), 720p mode Pan and Tilt/ Zoom and Focus/ Iris and ICR/ 128 Preset Position/ Home Position x12 Slow/ MID./ Fast Selectable [Fast: Approx. 5.0 Second (Tele to Wide) in Manual Mode] Slow/ MID./ Fast Selectable [Fast: Approx. 5.0 Second (Far to Near) in Manual Mode] Auto/ One Push Focus ALC (Adjustable Output Target Level)/ Manual Day/ Night/ Auto/ Schedule Off/ On Off/ On (4X) 1/1 ~ 1/10,000 Auto/ Manual Off/ On Adjustable ATW/ AWC/ Manual(1700K~11000K) 0~28dB (12 Step) (2D) Off/ On (Level= 1~5) Off/ AUTO/ SEQ/ TOUR Off/ On (Up to 24 area) OFF/ Mirror 6 input(ttl 5Vdc), 1 Output(0.5A 120Vac, 1A 24Vac) Off/ Auto Mode/ Preset Position IPS5208S AC100~240V Manual Approx. 0.15 /s ~ 120 /s 8Steps, 16Steps/ Preset Approx. 1 /s ~ 255 /s, Alarm Trigger Speed 360 /s Design and specification are subject to change without notice.
Network Function Video compression Resolution Frame rate Video streaming Video bitrate Security Users OSD Alarm Function CPU, memory Web PTZ control PTZ preset scheduling Mintenance Network Interface Client PC requirement Network protocols Mobile phone and PDA System integration CMX Video display OS Two-way Audio SD Card Recording H.264, Motion JPEG 1080P(1920x1080), 720P(1280x720), D1(720x480), CIF(352x240) H.264: up to 30FPS at 1080P(1920x1080) Motion JPEG: up to 30FPS at D1(720x480) RTP/HTTP, RTP/TCP, RTP/UDP, Multicast 128Kbps ~ 5Mbps Frame rate and bitrate controllable on-the-fly VBR/ CBR/ GOP supported Base64 HTTP encryption Multiple user access levels with password protection 10 user accounts available 8 simultaneous users Text overlay for date, time, and camera name Image upload over FTP and E- mail by alarm/ motion detection Embedded SoC ARM11, 528MHz, 256MB DDR2, 256MB flash memory Pan, tilt, zoom in/ out, absolute position, and video-click-n-move Yes, via web interface Firmware update via HTTP Firmware available at web site 10Mbps / 100Mbps, RJ-45 OS : Windows 2000, Windows XP, Windows Vista, Windows 7 Browser : Windows Internet Explorer 6, 7, 8 CPU : Intel Pentium 4 1.8GHz or above RAM : 1GB or above, Independent Display Card IP, TCP, UDP, HTTP, SMTP, NTP, DDNS, UPnP, FTP, ARP, DHCP, PPPoE, DNS, RTSP, RTCP, Telnet, ONVIF, ICMP, IGMP iphone, ipad and Android support ONVIF & LILIN HTTP API CMX HD3.6 support LILIN Universal ActiveX & LILIN Java Applet Embedded Linux 2.6.32 G.711 Support Micro SD/SDHC card for circular recording(card is not included) Design and specification are subject to change without notice.
General Model Power Supply Power Consumption Image Pick-up Device effective Pixels Total number of pixel Scanning System Video Output Minimum illumination Ambient Operation Temperature Operating Humidity Dimensions Weight Pan & Tilt Panning Range Panning Mode Panning Speed Tilting Range Tilting Mode Tilting Speed Lens Zoom Ratio Focal Length Minimum Aperture Ratio Minimum Object Distance Iris Range Angle Field of View Main Function Control Function Zoom Speed Focus Speed Auto Focus Iris Day & Night Sense Up (Slow Shutter) Electronic Shutter Speed Exposure Mode Back Light Compensation Digital Wide Dynamic Range Sharpness White Balance Auto Gain Control Digital Noise Reduce Auto Mode Privacy Function Digital Effect Alarm Input/ Output Schedule Setting 18X D/N WDR HD FAST DOME IP CAMERA IPS5184S AC24V 1/2.8" Type Exmor CMOS Sensor 2096(H) x 1561(V) = 3,269,760(pixel) 2144(H) x 1588(V) = 3,404,672(pixel) Progressive Scan CVBS 1.0Vp-p/ 75ΩBNC 0.5Lux (1/30sec, 50%, High Sensitivity mode ON) -10 C ~ +50 C (-41 F ~ 122 F) 0% ~ 90% 245mm(H) x 155mm(V) 2300g 360 Endless Manual, Auto, Manual Position, Sequential Position Manual Approx. 0.15 /s ~ 120 /s 8Steps, 16Steps/ Preset Approx. 1 /s ~ 255 /s, Alarm Trigger Speed 360 /s 18X Optical Zoom Pan and Tilt/ Zoom and Focus/ Iris and ICR/ 128 Preset Position/ Home Position Slow/ MID./ Fast Selectable [Fast: Approx. 5.0 Second (Tele to Wide) in Manual Mode] Slow/ MID./ Fast Selectable [Fast: Approx. 5.0 Second (Far to Near) in Manual Mode] Auto/ One Push Focus Design and specification are subject to change without notice. 15W -6 ~ +96 Manual, Auto, Manual Position, Sequential Position 4.7mm ~ 84.6mm 1 : 1.6 (Wide) ~ 3.5(Tele) 10mm(WIDE end) ~ 1.5m(TELE end) F1.6 ~ 360, Close Approx. 54.1 (WIDE end), approx. 3.2 (TELE end), 1080p mode Auto/ Manual Day/ Night/ Auto/ Schedule Off/ On 1/1 ~ 1/10,000 Auto/ Manual Off/ On Off/ On Adjustable ATW/ AWC/ Manual(1700K~11000K) 0~28dB (12 Step) (2D) Off/ On (Level= 1~5) Off/ AUTO/ SEQ/ TOUR Off/ On (Up to 14 area) OFF/ Mirror 6 input(ttl 5Vdc), 1 Output(0.5A 120Vac, 1A 24Vac) Off/ Auto Mode/ Preset Position IPS5188S AC100~240V Manual Approx. 0.15 /s ~ 120 /s 8Steps, 16Steps/ Preset Approx. 1 /s ~ 255 /s, Alarm Trigger Speed 360 /s
Network Function Video compression Resolution Frame rate Video streaming Video bitrate Security Users OSD Alarm Function CPU, memory Web PTZ control PTZ preset scheduling Mintenance Network Interface Client PC requirement Network protocols Mobile phone and PDA System integration CMX Video display OS Two-way Audio SD Card Recording H.264, Motion JPEG 1080P(1920x1080), 720P(1280x720), D1(720x480), CIF(352x240) H.264: up to 30FPS at 1080P(1920x1080) Motion JPEG: up to 30FPS at D1(720x480) RTP/HTTP, RTP/TCP, RTP/UDP, Multicast 128Kbps ~ 5Mbps Frame rate and bitrate controllable on-the-fly VBR/ CBR/ GOP supported Base64 HTTP encryption Multiple user access levels with password protection 10 user accounts available 8 simultaneous users Text overlay for date, time, and camera name Image upload over FTP and E- mail by alarm/ motion detection Embedded SoC ARM11, 528MHz, 256MB DDR2, 256MB flash memory Pan, tilt, zoom in/ out, absolute position, and video-click-n-move Yes, via web interface Firmware update via HTTP Firmware available at web site 10Mbps / 100Mbps, RJ-45 OS : Windows 2000, Windows XP, Windows Vista, Windows 7 Browser : Windows Internet Explorer 6, 7, 8 CPU : Intel Pentium 4 1.8GHz or above RAM : 1GB or above, Independent Display Card IP, TCP, UDP, HTTP, SMTP, NTP, DDNS, UPnP, FTP, ARP, DHCP, PPPoE, DNS, RTSP, RTCP, Telnet, ONVIF, ICMP, IGMP iphone, ipad and Android support ONVIF & LILIN HTTP API CMX HD3.6 support LILIN Universal ActiveX & LILIN Java Applet Embedded Linux 2.6.32 G.711 Support Micro SD/SDHC card for circular recording(card is not included) Design and specification are subject to change without notice. 66-IPS7228CSE-2
MERIT LILIN ENT. CO., LTD http://www.meritlilin.com 66-IPS7228CSE