READ ME EMC Ionix ControlCenter 6.1.0.14.383 Update Bundle 14 Read Me P/N 300-014-548 REV 03 March, 2013 This Read Me contain supplemental information about EMC Ionix ControlCenter Update Bundle version 6.1.0.14.383. Topics include: Revision history... 1 Update Bundle 14 description... 2 New features and changes... 2 Environment and system requirements... 3 Known problems and limitations... 3 Installation... 3 Cumulative patch contents... 22 Documentation updates... 40 EOPS announcements / Extended support offerings... 39 Troubleshooting and getting help... 40 Revision history The following table presents the revision history of this document: Revision Date Description 03 March, 2013 Third release of Update Bundle 14 Read Me. 02 December, 2012 Second release of Update Bundle 14 Read Me. 01 November, 2012 First release of Update Bundle 14 Read Me.
Update Bundle 14 description Update Bundle 14 description New features and changes This release is commonly called EMC Ionix ControlCenter 6.1.0 Update Bundle 14 (UB14). The version is 6.1.0.14.383. It is a cumulative roll up of ControlCenter 6.1 patches and update bundles including relevant SQL patches released by EMC prior to this release. Update bundle 14 has two different installers for 32-bit and 64-bit platforms. The new ControlCenter 64-bit installer will install 64-bit Oracle 11g and all other ControlCenter components remain 32-bit on 64-bit platforms. On the infrastructure repository systems (ControlCenter and StorageScope), the new ControlCenter 64-bit installer will install 64-bit Oracle 11g. It is required that you download and read the latest version of the Support Matrix and all other related ControlCenter documents from EMC Online Support before you begin installation. Note: You must upgrade agents to the UB14 level to make full use of the patches and additional features provided in this bundle. Added support for Oracle 11g. Added Oracle 64-bit support in ControlCenter for 64-bit operating systems. Added support for VMAX 1.5 and CKD devices. Added support for Solutions Enabler 7.5. Added support to discover and display new Federated Tiered Storage (FTS). Added support for EMC CentraStar 4.2.2. Added support for Java 1.7 update 7. Added support for HDS WLA by using JRE 1.7. Added support for the availability of pool compression information in STS query builder while generating custom reports. Added support for Mixed RAID types in VNX storage pool. Added a new memory check during installation to verify if 4GB of RAM is available to install/upgrade UB14 in an all-in-one setup. Added a new memory check during installation to verify if 3GB of RAM is available to install/upgrade UB14 in a distributed setup. Added a new disk space check during installation to verify if minimum disk space is available for UB14 upgrade in both all-in-one and distributed setups and notify users if the requirement is not met. Added support to export/import database to/from an external drive. Added new free disk space availability alert. Removed support for Symmetrix, SDM, and CLARiiON agents on HP-UX and AIX operating systems. 2 EMC Ionix ControlCenter 6.1 Update Bundle 14 Read Me
Environment and system requirements Removed support for Microsoft Internet Explorer version 6.0. Added support to discover or rediscover Managed Objects through NAS, CLARiiON, Symmetrix, and Host Agents using DefaultHiddenDCP feature. Added support to change the fully qualified domain name of non-infrastructure hosts or platforms. Added support to remove virtual machines marked as Deleted on the console automatically using a scheduled job that runs every day. Added support to reserve connections for WLA communications. Added support to optimize the mechanism of sending MOLIST for Brocade switches. Added support to optimize performance statistics collection for WLA. Added support to optimize provider calls for switch and fabric discovery. Added support to optimize logging and error handling in agent. Added support to start processing opcode only after the agent INITX initialization. Added virtual provisioning support for CLARiiON FLARE 28. Added support to edit MessageReplyTimeout value in Gateway agent ini file. Improved error messages in console for action. Improved Store log to simplify root cause determination of issues. Reduced Integration Gateway agent crashes. Environment and system requirements Solutions Enabler version For system requirements, refer to EMC Ionix ControlCenter 6.1 Support Matrix available at EMC Online Support. UB14 requires a minimum version of Solutions Enabler 7.5. For more information, refer to the latest version of the EMC Ionix ControlCenter 6.1 Support Matrix available at EMC Online Support. Known problems and limitations Installation For complete list of known issues and limitations of UB14, refer to the latest version of the EMC Ionix ControlCenter 6.1 Release Notes at EMC Online Support. This installation section contains the following subsections: Update Bundle 14 contents and download Special instructions Supported migration paths UB14 Error Handling flowchart EMC Ionix ControlCenter 6.1 Update Bundle 14 Read Me 3
Installation Preinstallation requirements Applying UB14 to different versions of Ionix ControlCenter Patched Ionix ControlCenter components UB14 installation Post installation requirements and optional steps Procedure for removing the StorageScope Repository and StorageScope Server after UB14 has been installed (optional) Rollback instructions Cumulative patch contents Update Bundle 14 contents and download Download the EMC Ionix ControlCenter 6.1 Update Bundle 14 from EMC Online Support at http://support.emc.com. For 32-bit platforms, download CC_4979.zip The CC_4979.zip contains the following files: Patch61014383_4979_x86.exe Patch executable for all components on 32-bit platforms. Data Contains required files for ControlCenter Upgrade. Ionix_CEC_1.0.x.x.exe Executable for Ionix ControlCenter Environment Checker. For more information, refer the Ionix ControlCenter Environment Checker section. For more information on utility console, how to run the jobs, and to get the audit reports, refer the EMC Ionix ControlCenter Environment Checker Technical Notes available on EMC Online Support at http://support.emc.com. update_bundle14_readme.pdf This document. For 64-bit platforms, download CC_5013.zip The CC_5013.zip contains following files: Patch61014383_5013_x86_64.exe Patch executable for all components on 64-bit platforms. Data contains required files for ControlCenter Upgrade. Ionix_CEC_1.0.x.x.exe Executable for Ionix ControlCenter Environment Checker. For more information, refer to Ionix ControlCenter Environment Checker section. For more information on utility console, how to run the jobs, and to get the audit reports, refer the EMC Ionix ControlCenter Environment Checker Technical Notes available on EMC Online Support at http://support.emc.com. update_bundle14_readme.pdf This document Special instructions IMPORTANT Please read the following special instructions before proceeding with the UB14 installation. 4 EMC Ionix ControlCenter 6.1 Update Bundle 14 Read Me
Installation IMPORTANT After upgrading the infrastructure and the Master Agent on the infrastructure servers to Ionix ControlCenter 6.1 and before upgrading the agents, you must install the latest Ionix ControlCenter Update Bundle from EMC online support site. After completing the upgrade or fresh installation of Ionix ControlCenter, the latest Update Bundle and Oracle 11g OCPU patch must be installed. Agent backwards compatibility Backwards compatibility means the agent will continue to function as designed with the previous versions of Ionix ControlCenter Update Bundles. The Ionix ControlCenter Update Bundles provide agent backwards compatibility for the following: Master and Host agents Common Mapping Agent Database Agent for Oracle from 5.2 SP5 or later Do not update your Common Mapping Agent to Update Bundle 5 or later if you are dependent on database support provided only with Solutions Enabler 6.5.x. Note: Any host that uses the EMC Invista Storage must have the Host Agent running at UB3 or later version. Supported migration paths In UB14, following migration paths are supported: 32-bit UB14 to 64-bit platform 64-bit UB14 to 64-bit platform 32-bit prior UB14 to 64-bit platform and then install UB14 64-bit prior UB14 to 64-bit UB14 In UB14, following migration paths are not supported: 64-bit prior UB14 to 32-bit UB14 64-bit UB14 to 32-bit platform EMC Ionix ControlCenter 6.1 Update Bundle 14 Read Me 5
Installation UB14 Error Handling flowchart Preinstallation requirements Before proceeding with the steps outlined in this document, the following prerequisites must be met. Mandatory Oracle 10g OCPU update before UB14 upgrade Apply latest Oracle 10g OCPU patch before upgrading to EMC ControlCenter 6.1 UB14. Note: Download the latest Enviroment Checker from EMC Online Support (https://support.emc.com) and ensure that all Enviroment Checker checks have passed before upgrading to UB14. Operating system locale settings Ionix ControlCenter supports only English language during installation. Before upgrading, ensure that the operating system locale setting it is set to English. Before upgrading, run ControlCenter Environment Checker utility to check the operating system locale setting. Memory The EMC Ionix ControlCenter 6.1 Performance and Scalability Guidelines available at EMC online support site provides more information on memory requirements. 6 EMC Ionix ControlCenter 6.1 Update Bundle 14 Read Me
Installation Note: Oracle recommends additional 1GB memory for Oracle 11g installations on the hosts. Note: Recommended to have additional 1GB memory in addition to suggested minimum memory for EMC ControlCenter on Windows Server 2008 hosts. Disk Space EMC ControlCenter 6.1 Update Bundle 14 requires a minimum of 13 GB free disk space. Depending on the database file size, you may require additional disk space to install Oracle 11g. During installation, DBF check will verify if the database file size is more that 30GB or not. If the size exceeds 30GB, the installer will abort installation. IMPORTANT It is recommended to run the Ionix ControlCenter Environment Checker tool before upgrading to Ionix ControlCenter 6.1 UB14. For more information, refer to Ionix ControlCenter Environment Checker section. Disabling IOPath Ensure that you disable IOPath before upgrading to UB14, do the following: Install latest quarterly Oracle security patch 1. Execute ECC_IOPath.bat -i command from command prompt to check the status of IOPath. 2. If IOPath is currently enabled, you can disable it by using the following command: ECC_IOPath.bat -d. You must download and install the latest quarterly Oracle Critical Security Patch Updates (32-bit/64-bit) from EMC Online Support before performing the upgrade. Encountering the error stated in step 4 indicates that the Oracle Critical Security Patch is out of date. Note: You MUST close all Oracle DLL's before starting the upgrade. Use the ControlCenter Environment Checker utility to check if any Oracle DLLs are being used by any Ionix ControlCenter services that you may need to stop prior to installing the patch. To verify whether this is necessary: 1. Navigate to the latest backup of the Ionix ControlCenter Repository. 2. Extract rambdb_exp.log from %RAMBBACKUPDIR%\exp\rambdb_exp_dmp.zip. 3. Edit rambdb_exp.log by using Notepad or Wordpad and go to the end of the file. 4. If you see the following lines at the end of the file, apply the the Oracle Security patch before upgrading to UB14: ORA-31672: Worker process DW01 died unexpectedly. Job "SYSTEM"."SYS_EXPORT_FULL_02" stopped due to fatal error at [Timestamp]ORA-39014: One or more workers have prematurely exited. EMC Ionix ControlCenter 6.1 Update Bundle 14 Read Me 7
Installation Backup StorageScope This prerequisite is only needed if UB14 is being applied to an existing Ionix ControlCenter environment. Backup Ionix ControlCenter Perform these steps prior to installing UB14: 1. Run the %ECC_INSTALL_ROOT%\repository\admin\emcsts_scripts\emcsts_trending_services. bat. 2. Run a StorageScope Repository Export and Backup. It is mandatory to perform a complete backup of Ionix ControlCenter prior to starting the UB14 installation except for fresh installation. 1. Download and install Ionix ControlCenter 6.1 Backup and Restore Utility (CC_4938.zip or CC_4990.zip) on all infrastructure servers. Ionix ControlCenter 6.1 Backup and Restore Utility Read Me provides more information. Note: If you have a ControlCenter setup installed using A02/04 kit and upgraded to pre-ub12, apply patch 4938 to back up ControlCenter. If you have a ControlCenter setup installed using A05 kit and upgraded to UB12, then apply patch 4990 to backup ControlCenter. The respective Backup and Restore patch Read me files provide more information. 2. Run backup.bat in the %ECC_INSTALL_ROOT%\HF<patch_number> directory on all infrastructure servers except for servers that have the Performance Manager GUI Client installed alone with no other Ionix ControlCenter components. 3. Reboot the server. 4. Copy the %ECC_INSTALL_ROOT%\ directory to another storage location. 5. Change the Ionix ControlCenter and Oracle services back to Automatic and proceed with applying the patch. Note: If Ionix ControlCenter is installed in a Microsoft Cluster, leave all the Ionix ControlCenter and Oracle services set to Manual. Ionix ControlCenter Environment Checker Ionix ControlCenter Environment Checker is a diagnostic tool for determining whether the existing Ionix ControlCenter is ready to be upgraded to the next higher version. The purpose of this tool is to list out any potential issues that could occur while upgrading Ionix ControlCenter. Starting with, the Ionix ControlCenter Environment Checker is part of the update bundle downloadable file. It is required to run the Ionix ControlCenter Environment Checker tool before upgrading to Ionix ControlCenter 6.1 UB14. Perform the following to install and use the Ionix ControlCenter Environment Checker tool: 1. Execute the Ionix_CEC_1.0.x.x.exe file distributed with the EMC Ionix ControlCenter 6.1 Update Bundle 14. 8 EMC Ionix ControlCenter 6.1 Update Bundle 14 Read Me
Installation 2. By default, the Ionix ControlCenter Environment Checker is extracted to the local drive. You can also extract the tool to a non-default location. 3. Launch the tool by double-clicking the Ionix_CEC_1.0.x.0.exe file in the <CEC_INSTALL_FOLDER>. 4. Update the Ionix ControlCenter Environment Checker to the latest version by clicking Help -> Check for Updates. For more information on using the tool, refer to Ionix ControlCenter Environment Checker Online Help. Note: If there is no internet connectivity or if the host is behind the firewall, download latest version from EMC Online Support site and install it on the host. Note: The Ionix ControlCenter Environment Checker tool is updated periodically. The next time you choose to run this tool, it is recommended that you check for any latest updates. Note: In a distributed Ionix ControlCenter deployment, install and run the Ionix ControlCenter Environment Checker tool on each of the infrastructure component servers to verify their upgradability. Stop infrastructure services Before implementing this update bundle, you must stop the following Ionix ControlCenter services on all the following Ionix ControlCenter infrastructure systems: EMC ControlCenter API Server EMC ControlCenter Key Management Server EMC ControlCenter Master Agent EMC ControlCenter Repository EMC ControlCenter Server EMC ControlCenter Store EMC ControlCenter STS MSA Web Server EMC ControlCenter Web Server EMC StorageScope Repository EMC StorageScope Server Wait until the Server and Store services are completely stopped. This can take 3 5 minutes. Verify that they have stopped in the Windows Task Manager (in the Processes tab, and then look for ECCService_Store.exe and ECCService_Server.exe. It is recommended to change all the service statuses to Manual and reboot the machine. Note: Depending on your infrastructure's configuration, these services might not all be running on the same system. EMC Ionix ControlCenter 6.1 Update Bundle 14 Read Me 9
Installation Note: When you stop EMC StorageScope Server, it should automatically stop the associated SRMService.exe service, if the SRMService.exe service is not stopped, ensure that this service is stopped manually. Note: Stop the Oracle Agent (EGOAgent.exe) service manually. IMPORTANT A connection to the Ionix ControlCenter Repository is required to install the patch, so do not stop the following services: OracleECCREP_HOMETNSListener, OracleServiceRAMBDB (Ionix ControlCenter Repository), and OracleServiceEMCSTSDB (StorageScope Repository). Stop non-ionix ControlCenter services Stop the following non-ionix ControlCenter services: All antivirus services should be disabled so that on-access virus scans and background virus scanning operations are not running in the background on any StorageScope systems. All COM+ services should be stopped and disabled except on a Microsoft Cluster. All server management services (HP and DELL) should be stopped and disabled. VMware Tools Distributed Transaction Coordinator Windows Management Instrumentation Applying UB14 to different versions of Ionix ControlCenter The following scenarios describe how to prepare different versions or configurations of Ionix ControlCenter for the UB14 update. Completely fresh install of Ionix ControlCenter 6.1 (Update Bundle 14) The EMC Ionix ControlCenter 6.1 Planning and Install Guide, Volume 1 provides information to perform the initial installation. Upgrade to Ionix ControlCenter 6.1 from a pre-6.1 version Note: These steps apply to Ionix ControlCenter components installed according to Ionix ControlCenter s design across one or more infrastructure servers. Using the A02/A04 or A05(recommended) kit, upgrade to ControlCenter 6.1 from pre-6.1. Do not use the Ionix ControlCenter 6.1 Rev A01 media. To complete the upgrade: 1. Reboot the Ionix ControlCenter Server and Repository first, then reboot the other infrastructure servers. 2. Install the Console on the Remote Access Server and not the infrastructure host. Uninstall the console and delete the user directories. 10 EMC Ionix ControlCenter 6.1 Update Bundle 14 Read Me
Installation 3. Upgrade the agents on the WLA Archiver host. 4. Upgrade the StorageScope service. 5. Connect to StorageScope and run ETL successfully. 6. Upgrade Master agent. If Performance Manager is already installed on a host with master agent deployed, Performance Manager will be upgraded automatically. Upgrade and run Performance Manager GUI Client. 7. Connect to the Web Console if this is part of your design. Verify version of Ionix ControlCenter To verify the version of Ionix ControlCenter: 1. Open a DOS window on Ionix ControlCenter Repository host. 2. Open the following directory: cd /d %ECC_INSTALL_ROOT%\Repository\admin\Ramb_Scripts. 3. Run ecc_getversion.bat. You will see the version information as follows: ECC Repository Version ECC Repository version information External Version : Version 6.1.0 Internal Version : 6.1.0.4.71 KitSpec : GA6 Build Label : ECC61040.16MAY2009.1146.224 Build Name : ECC61040.16MAY2009.1146.224 Release Date : Sat May 16 14:34:00 2009 Install Date : Wed May 27 17:02:30 2009 4. Exit the DOS window. Existing EMC Ionix ControlCenter 6.1 Ionix ControlCenter environments that are already at a UB4 or above can be upgraded to 6.1.0.14.383 (UB14) immediately following the instructions below. Note: Anytime a Master Agent is installed on a new host it must be patched immediately to 6.1.0.14.383 or later. This does not apply to Ionix ControlCenter 6.1 Update Bundle 12 or later. Note: The EMC Ionix ControlCenter Planning and Install Guide, Volume 1 provides details to discover pre-61 agents into a fresh install of Ionix ControlCenter 6.1. In a Microsoft Cluster When applying any Ionix ControlCenter upgrade, Update Bundle or OCPU Patch, the Ionix ControlCenter and Oracle resources found in the Cluster Administrator must be removed from the cluster as follows: 1. Open the Cluster Administrator. 2. Select the Oracle Repository Resources and take it off-line. EMC Ionix ControlCenter 6.1 Update Bundle 14 Read Me 11
Installation Note: All of the Oracle and Ionix ControlCenter resources should be stopped with this action. 3. Select the Oracle Resource and delete. Note: All of the Oracle and Ionix ControlCenter resources should be selected for deletion. 4. Open the Services applet. 5. Start the Oracle Services. Patched Ionix ControlCenter components 6. After the upgrade or update bundle is completed successfully, add the Oracle and Ionix ControlCenter resources back to the cluster. UB14 patches the following Ionix ControlCenter 6.1 (version 6.1.0.14.383) components: EMC ControlCenter Server EMC ControlCenter Store EMC ControlCenter Console EMC ControlCenter Web Server EMC ControlCenter Web Console EMC ControlCenter StorageScope EMC ControlCenter API Server EMC ControlCenter Key Management Server Performance Manager Client EMC ControlCenter Agents EMC ControlCenter FLR Archiver EMC ControlCenter Security Library Files The following components will not reflect the updated 6.1.0.14.383 version even though they have been updated: EMC StorageScope Repository Tomcat Web Application Performance Manager Client API Client 12 EMC Ionix ControlCenter 6.1 Update Bundle 14 Read Me
Installation Note: Verify that the services are running. For distributed Infra check on each host where the following databases are installed (RAMBDB and EMCSTSDB): OracleECCREP_HOMETNSListener OracleServiceRAMBDB (Ionix ControlCenter Repository) OracleServiceEMCSTSDB (StorageScope Repository) UB14 installation Note: The Ionix ControlCenter Infrastructure and the Repository must be completely upgraded and rebooted before continuing to the other infrastructure components. Note: During UB14 upgrade, various repository backup folders are created under different upgrade directories. To reclaim the disk space, you can remove these folders after successful upgrade. For more information on backup folders, refer to Backup folder created during UB14 Upgrade section. The bundle should be installed on the infrastructure hosts in the following order: EMC ControlCenter Repository EMC ControlCenter Server EMC StorageScope Repository EMC StorageScope Server EMC ControlCenter Store/API Server/WebConsole/Performance Manager GUI client Every Ionix ControlCenter infrastructure system needs to be updated with this patch. In a distributed Ionix ControlCenter infrastructure environment, components may reside on multiple systems. Note: If the StorageScope Server and the StorageScope Repository reside on different hosts, you may need to reapply this patch to the StorageScope Server host after you update the StorageScope Repository. UB14 patch can be applied to any previously installed version 6.1.0.x.x of Ionix ControlCenter 6.1 as follows: 1. Verify that all of the above preinstallation requirements have been met. 2. On 32-bit platforms, unzip CC_4979.zip to a shared directory where each of the infrastructure servers can connect. Note: On 64-bit platforms, unzip CC_5013.zip. 3. Execute Patch61014383_4979_x86.exe on the infrastructure you are currently updating. Note: On 64-bit platforms, execute Patch61014383_5013_x86_64.exe. EMC Ionix ControlCenter 6.1 Update Bundle 14 Read Me 13
Installation Note: The InstallShield may display a dialog box indicating that the StorageScope Server will not be updated at this time if the StorageScope Server and the StorageScope Repository reside on different hosts, and the StorageScope Server is on the same host as the Ionix ControlCenter Repository and/or the Ionix ControlCenter Server. 4. Click Next on the welcome screen to go to the Ready to Install step of the wizard. Following warning message appears: Locked files/folders were encountered while trying to back up <directory> Would you like to try again? Yes/No As a workaround, rename the folder latest.xxxx to old_latest.xxxx at the path %ECC_INSTALL_ROOT%\tools\jre\nt\. After renaming the folder, click the Yes button to continue the installation. Note: If the following message appears during installation, then the database upgrade failed. Error upgrading database. Please review <log_file>. Please contact customer service regarding this upgrade failure. Review the log to determine the cause of the database upgrade failure. Contact customer service to determine if a patch or other fix is needed. Apply any required patches to fix the issue. Click OK on the original message box. Another message box will pop up with the following text. Would you like to retry the database upgrade? Click YES if you would like to retry upgrading the database. Click NO to abort the installer. Note that aborting at this point will require you to rollback to your previous version of Ionix ControlCenter. 5. You will receive confirmation that the patch has been successfully applied to the system with a Finish button. 6. Restart the Ionix ControlCenter services. Change the Services statuses to Automatic. 7. After the Ionix ControlCenter server and Repository are rebooted, update the next infrastructure component in the order shown above. Note: : If a post upgrade validation issue is encountered in ControlCenter Repository, the following warning message will appear before the install finish dialog box appears. ControlCenter Repository upgrade completed, but post-upgrade validation found few minor discrepancies. you can continue to use ControlCenter. Please review the post-upgrade validation report for ControlCenter Repository at location %ECC_INSTALL_ROOT%\Repository\admin\Ramb_scripts\upgrade\schema_reports\ram b_reports_summary.log and contact EMC Customer service if you have concerns. 14 EMC Ionix ControlCenter 6.1 Update Bundle 14 Read Me
Installation Note: : If a post upgrade validation issue is encountered in StorageScope Repository, the following warning message will appear before the install finish dialog box appears. ControlCenter StorageScope Repository upgrade completed, but post-upgrade validation found few minor discrepancies. you can continue to use Ionix ControlCenter. Please review the post-upgrade validation report for Ionix ControlCenter StorageScope Repository at location %ECC_INSTALL_ROOT\Repository\admin\emcsts_scripts\upgrade\schema_reports\emcs ts_reports_summary.log and contact EMC Customer service if you have concerns. 8. Reboot each infrastructure host and confirm that the Ionix ControlCenter services started. 9. For each Ionix ControlCenter 6.1 Console: Note: If the server is a licensed Terminal Services or Citrix remote access server, then follow the steps to installing/upgrading the Console in the EMC Ionix ControlCenter 6.1 Planning and Installation Guide, Volume 1 and the EMC Ionix ControlCenter 6.1 Upgrade Guide. This step is only relevant for a Console running on a single user workstation. a. From a browser, connect to https://<serverhost>:30002/webinstall. b. Click Installation, and then select Console Patch 6.1.0.14.383 to apply UB14. 10. Patch the Master Agent first. IMPORTANT The Master Agent must be patched first before the sub-agents can be patched. 11. Apply patch to all remaining agents. Note: If the Apply Patch task fails when attempting to start agents, issue Restart Master Agent from the Console. Refer to the section, Failed agent recovery instructions section for more information. Backup folder created during UB14 Upgrade This section provides information on the backup folders created during UB14 upgrade to ensure that all the appropriate log files are saved for troubleshooting the schema or database errors. These folders can be removed after successful upgrade to claim the used disk space. Ionix ControlCenter backup folders created during UB14 upgrade The following are the ControlCenter backup folders created during UB14 upgrade: 1. For upgrades starting with 6.1 A01, the following backup directories will be created under %ECC_INSTALL_ROOT%\Repository\admin: Ramb_Scripts_610 Ramb_Scripts_610_Invista Ramb_Scripts_610_Tigon Ramb_Scripts_610_UB7 Ramb_Scripts_610_UB8 EMC Ionix ControlCenter 6.1 Update Bundle 14 Read Me 15
Installation Ramb_Scripts_610_ 2. For upgrades starting with 6.1 A04, the following backup directories will be created under %ECC_INSTALL_ROOT%\Repository\admin: Ramb_Scripts_Invista Ramb_Scripts_610_Tigon Ramb_Scripts_610_UB7 Ramb_Scripts_610_UB8 Ramb_Scripts_610_ 3. For upgrades starting with UB5, the following backup directories will be created under %ECC_INSTALL_ROOT%\Repository\admin: Ramb_Scripts_Tigon Ramb_Scripts_610_UB7 Ramb_Scripts_610_UB8 Ramb_Scripts_610_ 4. For upgrades starting with UB7, the following backup directories will be created under %ECC_INSTALL_ROOT%\Repository\admin: Ramb_Scripts_UB7 Ramb_Scripts_610_UB8 Ramb_Scripts_610_ 5. For upgrades starting with UB8, the following backup directory is created under %ECC_INSTALL_ROOT%\Repository\admin: Ramb_Scripts_610_UB8 Ramb_Scripts_610_ 6. For upgrades starting with, the following backup directory is created under %ECC_INSTALL_ROOT%\Repository\admin: Ramb_Scripts_610_ 7. For upgrades starting with UB11, the following backup directory is created under %ECC_INSTALL_ROOT%\Repository\admin: Ramb_Scripts_610_UB11 8. For upgrades starting with UB12, the following backup directory is created under %ECC_INSTALL_ROOT%\Repository\admin: Ramb_Scripts_610_UB12 StorageScope backup folders created during UB14 upgrade The following are the StorageScope backup folders created during UB14 upgrade: 1. For upgrades starting with 6.1 A01, the following backup directories will be created under %ECC_INSTALL_ROOT%\Repository\admin: emcsts_scripts_610 emcsts_scripts_610_invista emcsts_scripts_610_tigon emcsts_scripts_610_ub7 emcsts_scripts_610_ub8 emcsts_scripts_610_ 2. For upgrades starting with 6.1 A04, the following backup directories will be created under %ECC_INSTALL_ROOT%\Repository\admin: 16 EMC Ionix ControlCenter 6.1 Update Bundle 14 Read Me
Installation emcsts_scripts_invista emcsts_scripts_610_tigon emcsts_scripts_610_ub7 emcsts_scripts_610_ub8 emcsts_scripts_610_ 3. For upgrades starting with UB5, the following backup directories will be created under %ECC_INSTALL_ROOT%\Repository\admin: emcsts_scripts_tigon emcsts_scripts_610_ub7 emcsts_scripts_610_ub8 emcsts_scripts_610_ 4. For upgrades starting with UB7, the following backup directories will be created under %ECC_INSTALL_ROOT%\Repository\admin: emcsts_scripts_ub7 emcsts_scripts_610_ub8 emcsts_scripts_610_ 5. For upgrades starting with UB8, the following backup directory is created under %ECC_INSTALL_ROOT%\Repository\admin: emcsts_scripts_610_ub8 emcsts_scripts_610_ 6. For upgrades starting with, the following backup directory is created under %ECC_INSTALL_ROOT%\Repository\admin: emcsts_scripts_610_ 7. For upgrades starting with UB11, the following backup directory is created under %ECC_INSTALL_ROOT%\Repository\admin: emcsts_scripts_610_ub11 8. For upgrades starting with UB12, the following backup directory is created under %ECC_INSTALL_ROOT%\Repository\admin: emcsts_scripts_610_ub12 Post installation requirements and optional steps Post installation requirements The Invista Agent and all Host Agents running on Hosts accessing Invista storage will need to be patched to the UB3 or later. Any Invista instance previously discovered in the Console must be manually deleted from the Console and then rediscovered. If the WLA Archiver host does not have the ECC_INSTALL_ROOT system environment variable set correctly, the wlahttpserver will not be able to find the SSL certificates that allow it to communicate with the other Performance Manager components. For example, if the ECC_INSTALL_ROOT environment variable is not set, then create the ECC_INSTALL_ROOT variable using the System Properties, Advanced, Environment Variables GUI and set the variable value to the location where Ionix ControlCenter is installed. For example: e:\ecc. EMC Ionix ControlCenter 6.1 Update Bundle 14 Read Me 17
Installation Failed agent recovery instructions If any agent patching tasks appear as failed in a task list, follow these instructions to recover. These instructions may need to be repeated multiple times depending on the failure scenario. Recovery scenario #1 1. In the Console agent view, verify that agents are active and at the correct version. 2. If agents are running at the correct version, agent installation is complete and task failure was due to a timeout and can be disregarded. Recovery scenario #2 1. In the Console agent view, verify that agents are active and at the correct version. 2. If agents are not running or are not at the correct version, agent patch installation was unsuccessful. 3. Stop Master Agent through task manager or remote tool (all mstragent.exe processes should be stopped). 4. Stop all subagents through task manager or remote tool. Refer to Table 1 for agent process names. 5. Start Master Agent from the Services dialog. To start the services dialog, right-click on My Computer, click Manage -> Services and Applications -> Services. 6. Perform agent patch task. Recovery scenario #3 1. If Master Agent is currently inactive, patch cannot be applied due to communication problem or application errors are seen against the mstragent.exe process 2. Stop Master Agent through Task Manager or remote tool (all mstragent.exe processes should be stopped). 3. Stop all subagents through Task Manager or remote tool. Refer to Table 1 for agent process names. 4. Start Master Agent from the Services dialog. To start the services dialog, right-click on My Computer, click Manage -> Services and Applications -> Services. 5. Perform agent patch task Table 1 Window-based agents (1 of 2) Agent name Master Agent Integration Gateway Workload Analyzer Archiver Common Mapping Agent Process name mstragent.exe cngagent.exe enwagent.exe egzagent.exe 18 EMC Ionix ControlCenter 6.1 Update Bundle 14 Read Me
Installation Table 1 Window-based agents (2 of 2) Agent name Backup Agent for Tivoli Storage Manager Backup Agent for EMC NetWorker Backup Agent for VERITAS NetBackup EMC Symmetrix SDM Agent Fibre Channel Connectivity Agent Database Agent for Oracle Host Agent for Windows VMware Agent Storage Agent for NAS Storage Agent for CLARiiON Storage Agent for EMC Centera Storage Agent for HDS Storage Agent for Symmetrix Storage Agent for SMI EMC Invista Agent FLR Archiver Process name mnyagent.exe mnnagent.exe mnbagent.exe egfagent.exe egnagent.exe egoagent.exe mnragent.exe egvagent.exe cnnagent.exe mglagent.exe cgcagent.exe mgdagent.exe egsagent.exe mgxagent.exe fgxagent.exe srmserver.exe Display trust certificate warning (optional) Perform the following steps to remove the trust certificate warning every time a web application is accessed: Prerequisites 1. Install UB14 by using the directions in this document. 2. On the Ionix ControlCenter Server host, open the file: %ECC_INSTALL_ROOT%\ecc_inf\data\ecc_inf_hostname\class\EccSecurityConfig.pro perties. 3. Verify that the file has the following setting: Global.TrustedHostFilter=trust_all. Note: If you change this parameter, the Ionix ControlCenter Server must be restarted. 4. Restart the Server service then restart the Store services. Patching EMC ControlCenter Web Server service Perform this procedure on all hosts that have the EMC ControlCenter Web Server service. 1. Backup and delete the following files from your EMC ControlCenter Web Server host: tom.lb from %ECC_INSTALL_ROOT%\lockbox keycert.ks from %ECC_INSTALL_ROOT%\Tomcat\conf EMC Ionix ControlCenter 6.1 Update Bundle 14 Read Me 19
Installation trust.ks from %ECC_INSTALL_ROOT%\Tomcat\conf trust.ks from %ECC_INSTALL_ROOT%\Tomcat\shared 2. Stop and start the EMC ControlCenter Web Server service to regenerate the files you deleted in the previous step. Importing Ionix ControlCenter Trust Certificate in browser Open the browser and point it to the following Ionix ControlCenter web applications (these include StorageScope, Web Console, Web Install, Performance Manager, and Documentation Library). https://<hostname>:30002/srm https://<hostname>:30002/webinstall https://<hostname>:30002/eccweb https://<hostname>:30002/wla For Internet Explorer version 7.0 and later 1. Launch Internet Explorer. The security warning should read: The security certificate presented by this website was not issued by a trusted certificate authority. The security certificate presented by this website was issued for a different website's address. Security certificate problems may indicate an attempt to fool you or intercept any data you send to the server. 2. Click Continue to this website (not recommended). 3. There is a red icon that displays Certificate Error. Click Certificate Error. 4. Click View Certificates when the dialog box appears. 5. Click the Certification Path tab. 6. Select the certificate that is one level up on the path and click View Certificate. 7. Verify that the proper certificate was selected as follows: a. Select the Details tab. b. Click on the Subject field. c. If OU value shows Ionix ControlCenter - ROOT then proceed to the next step. Otherwise, ensure the proper certificate is selected starting with step 5. 8. Click the General tab, and click Install Certificate to open Import Certificate Wizard. 9. Click Next on the first wizard screen. 10. Select Place all certificates in the following store and click Browse. Select Trusted Root Certification Authorities. Click Next and then click Finish. 11. Relaunch the web browser. Note: Importing Ionix ControlCenter Trust Certificate needs to be performed on all hosts from where Ionix ControlCenter web applications are accessed. 20 EMC Ionix ControlCenter 6.1 Update Bundle 14 Read Me
Installation Note: In order to access multiple Ionix ControlCenter deployment's web applications from the same browser, the certificate regeneration procedure must be executed for each Ionix ControlCenter web application deployments. Procedure for removing the StorageScope Repository and StorageScope Server after UB14 has been installed (optional) If the EMC Ionix ControlCenter Repository and StorageScope Repository is installed with OCPU, you will not be able to reinstall StorageScope Repository on the ControlCenter Repository host. This is because, the EMC Ionix ControlCenter Repository is at a higher Oracle version than the GA or CD A05 version of what you are trying to install for StorageScope. However, StorageScope Repository can be installed on a different host in a distributed environment and then upgraded to or later. IMPORTANT This procedure is optional and only necessary if you want to remove the StorageScope Repository and StorageScope Server after or later has been installed. You can use the Add/Remove Programs to uninstall the StorageScope Server and StorageScope Repository for a system after UB14 installation is complete. After unistalling StorageScope Server and StorageScope Repository, EMC ControlCenter STS MSA Web Server and EMC StorageScope Repository services will still appear in the Services window. Rollback instructions To perform a rollback, refer to the Restore Procedure in the Update Bundle Backup/Restore Utility Read Me - Patch 4938 for installation prior to UB12 or Patch 4990 for UB12 or later installations. If the Key Management Server does not start up after the rollback is performed, contact your EMC Customer Service Representative. EMC Ionix ControlCenter 6.1 Update Bundle 14 Read Me 21
Cumulative patch contents Cumulative patch contents Table 2 Cumulative patch contents for all components delivered under Update Bundle 14 (1 of 18) Patch Number Build ID/Component Problem description CQ number Update Bundle 14- Patch 4979/5013 5010 6.1.0.12.523 3TB drives in VNX (Block) Arrays show Disk Capacity as blank in the ControlCenter Console and as negative numbers in StorageScope. 638995, 592767 5004 6.1.0.12.508 Support for alpha numeric disk names on DAE7S disk enclosure. 637766 5003 6.1.0.12.510 Missing CLARiiON events when CLARiiON agent load balances. When the CLARiiON agent switches primary responsibility to the secondary agent, the event notification is still sent to the original primary agent. 585479 5002 6.1.0.12.469 Unable to see disks for VNX arrays. 583806 4998 6.1.0.12.423 Solaris 11 support. 634975 4995 6.1.0.12.400 CLARiiON agent is crashing on Solaris host with SE 7.4. 567177 4987 6.1.0.12.339 Oracle Handle leak fix. 513113, 564121, 634971 4985 6.1.0.12.464 VNX Block 7.32 and VNX file 5.32 support including mixed RAID types. 583383 4983 6.1.0.12.379 Sun Solaris Host agent (and probably other host agents) retrieve wrong serial number of attached HDS VSP / R700 array. 4977 6.1.0.12.307 Flag UseInq=yes should be added automatically to the agent ini files, if required. 566871 566820 4996 6.1.0.12.401 StorageScope Weekly Trending Automated Job fails to run. 552812 5000 6.1.0.12.467 All allocated values for VNX appears as 0 in StorageScope reports since upgrade to ub12. 637005 Update Bundle 12- Patch 4961 4967 6.1.0.12.259 Upgraded to UB11 from, 8 Celerras can be re-discovered but 17 Celerras cannot discovered. 4964 6.1.0.12.259 Pool Name for CLARiiON shows Root in the EMC Ionix ControlCenter console for disk properties instead of pool name 4963 6.1.0.12.259 SMI Agent to allow discovery of the Physical and Storage Disks groups on NEC Arrays 4957 6.1.0.12.259 Unable to fully discover Solaris cluster host with EFI labelled disks not showing correct data. 554251 566661 542831 566410 4955 6.1.0.12.259 EMC Ionix ControlCenter console hangs while expanding folder. 566526 4953 6.1.0.12.259 MVS Physical agents gets errors during discovery of VMAX impacting StorageScope reports. 538405 4949 6.1.0.12.259 Cannot fully discover one of three HDS VSP arrays. 550452 4928 6.1.0.12.259 NAS File System capacity data not displayed for VNX based arrays. 543504 4921 6.1.0.12.259 Unable to launch EMC Ionix ControlCenter console from a remote host when the Windows Firewall is enabled on the EMC ControlCenter Server. 541208 22 EMC Ionix ControlCenter 6.1 Update Bundle 14 Read Me
Cumulative patch contents Table 2 Cumulative patch contents for all components delivered under Update Bundle 14 (2 of 18) Patch Number Build ID/Component Problem description CQ number 4912 6.1.0.12.259 The file authenticator utility is running into a loop where it is signing the already signed file under prereq_check folder while upgrading to Update Bundle 9. 4965 6.1.0.12.259 Discovery failed alert in EMC Ionix ControlCenter console after UB11 upgrade. 4971 6.1.0.12.259 EMC Ionix ControlCenter 6.1 UB11 host agent for Linux fails to bring QLogic HBAs into EMC Ionix ControlCenter and associate them to the host. 4971 6.1.0.12.259 Unable to view masking information on hosts due to HBAs not getting discovered by the host agent. 495559 581879 554847 556521 4971 6.1.0.12.259 AIX hosts agent not discovering HBAs. 557456 4968 6.1.0.12.259 EMC Ionix ControlCenter cannot fully discover DS-5300B switches after applying UB11. 554381 Update Bundle 11- Patch 4906 4906 6.1.0.11.849 The Linux Host Agent does not load SG module into memory in time for the device discovery to begin in turn causing streaming SCSI errors. 4906 6.1.0.11.849 In Ionix ControlCenter 6.1 UB5, the nodes are not sorted correctly in the Symmetrix Login History table. 4906 6.1.0.11.849 In StorageScope, Virtual Storage Imported Capacity and Virtual Storage Unimported Capacity show the values as 0 (zero) for VPLEX. In the Multipath Devices on Virtual Storage table under the Properties view for Host Devices, the product for VPLEX devices is shown as Invista. 4906 6.1.0.11.849 Native installation of Master Agent fails on Solaris host with Global Zone. 4906 6.1.0.11.849 Sun Java JDK/JRE/SDK Multiple Vulnerabilities (CVE-2011-0864,CVE-2011-0866,CVE-2011-0865,CVE-2011-0867,CV E-2011-0871) Oracle has released their quarterly Critical Patch Update Advisory for June 2011 addressing multiple vulnerabilities in Sun Java JDK / JRE / SDK. This Critical Patch Update contains new security fixes across Java SE products. The JRE is upgraded to the latest version 1.6 update 26 that has a fix for these vulnerabilities. 4906 6.1.0.11.849 All repository maintenance jobs are scheduled to run next on 1 Jan 4000. 4906 6.1.0.11.849 Unable to push Solutions Enabler from Ionix ControlCenter Console. The status shows successful in Ionix ControlCenter Console but no Solutions Enabler folder is created. 4906 6.1.0.11.849 Ionix ControlCenter Console does not respond while checking Masking View. 4906 6.1.0.11.849 Incorrect query result is reported in StorageScope when the customer tries to generate a report that shows all host file systems and SAN connected devices used for each of those file systems, including masking ID. 4906 6.1.0.11.849 Migrating EMC Ionix ControlCenter from a 32-bit Operating System to a 64-bit Operating System. 523844 492964 518060 495642 551514 566361 580051 566458 536346 573435 EMC Ionix ControlCenter 6.1 Update Bundle 14 Read Me 23
Cumulative patch contents Table 2 Cumulative patch contents for all components delivered under Update Bundle 14 (3 of 18) Patch Number Build ID/Component Problem description CQ number 4906 6.1.0.11.849 Ionix ControlCenter Alerts window displays incorrect SRDF/A statistics alerts. 4906 6.1.0.11.849 The Thin pool information displays 1622% for % subscribed in the StorageScope report for VMAX. 4906 6.1.0.11.849 A StorageScope built-in query, Masked, Mapped, but Not Accessible is double counting capacity for query results due to multi-pathing software. 4906 6.1.0.11.849 The Minimize button minimizes all window instead of half window in the Masking - All Storage view. 532494 542401 544624 399870 4906 6.1.0.11.849 The NAS agent does not get Serial Number for Celerra. 495337 4906 6.1.0.11.849 The SRDF/A metric 'Time since last switch' displays irrelevant data for certain Symmetrix involved in asynchronous sessions. 4906 6.1.0.11.849 Unable to discover ESX servers in Ionix ControlCenter. Fatal logs are generated due to this. 4906 6.1.0.11.849 The value in the 'Purge Data After' field in the Trending Settings Wizard cannot be changed using the down-arrow button. 540084 540704 546569 4906 6.1.0.11.849 Some RDF devices in Ionix ControlCenter are in Erroneous state. 566296 4906 6.1.0.11.849 Issues encountered with hot fix 4563 when migration from 64-bit Windows 2003 to 64-bit Windows 2008. 4906 6.1.0.11.849 The inq.linux file is missing in the /usr/ecc/exec/mlr610 directory for the host agent on Linux Enterprise Server 10 (IA64). 4906 6.1.0.11.849 In Ionix ControlCenter 6.1 UB7, customers are unable to start Ionix ControlCenter services. The ecc_getversion.bat script fails with the message Code value of clb_open is -21. 4906 6.1.0.11.849 The sdk.clb file is of size zero, causing lockbox errors when starting Master agent. 4906 6.1.0.11.849 The 'R1 to R2 Lag time ' alerts in the Ionix ControlCenter console should report in seconds. 4906 6.1.0.11.849 Post upgrade validation issues found in Ionix ControlCenter Repository after upgrade to. 530246 495294 495232 534893 571985 495582 4906 6.1.0.11.849 Support Console push for agents on Solaris X86 platform. 579656 4906 6.1.0.11.849 Performance Manager does not take accurate port speed when calculating utilization in mixed-port speed environments. 4906 6.1.0.11.849 The Total SRDF column in the Properties view for the symmetrix 2853 and 3343 shows zero capacity. 4906 6.1.0.11.849 Inconsistencies observed in Ionix ControlCenter and StorageScope in the way the Symmetrix and CLARiiON devices, and disk characteristics are reflected. 4906 6.1.0.11.849 Ionix ControlCenter reports that SAV devices in Symmetrix VMAX are 90% full. This is incorrect because, the symmetrix does not have any SAV device. 4906 6.1.0.11.849 StorageScope is not populating the SPC2 and OS2007 SCSI flags in reports. 470885 550011 508831 495391 540517 24 EMC Ionix ControlCenter 6.1 Update Bundle 14 Read Me
Cumulative patch contents Table 2 Cumulative patch contents for all components delivered under Update Bundle 14 (4 of 18) Patch Number Build ID/Component Problem description CQ number 4906 6.1.0.11.849 Changes required in Symmetrix agent to resolve intermittent network errors (Tcp::TryWrite seen in EGS logs). 4906 6.1.0.11.849 MRLK 7.2 is pushed from ControlCenter but the old Solutions Enabler version is still reported on the local host. 4906 6.1.0.11.849 The Performance Manager data for CX700 still shows incorrect data after applying patch HF4804. 4906 6.1.0.11.849 SMTP settings changed through the StorageScope GUI are not reflected in the stsapplication.properties file. 4906 6.1.0.11.849 In Ionix ControlCenter 6.1, StorageScope does not display all information related to HP-XP & HDS. 543073 495623 542964 494894 549465 4949 Storage agent for HDS Unable to fully discover one of three HDS VSP arrays. 550452 4941 Database script After installing Update Bundle 8 patch, the Linux hosts reports their IPv6 addresses in StorageScope reports as opposed to the IPv4 address that were reported previously. 4940 6.1.0.9.792 Hot fix for host agent for Linux on SUSE IA64 for issues with HBA discovery. 542472 580178 4939 6.1.0.9.778 After upgrading Connectrix Manager to 10.4.3 switch discovery fails. 544077 4938 Ionix ControlCenter Backup and Restore script Backup and Restore script for UB11. This is a replacement of HF4887. 530246, 579493 4937 Database script Stale data exists in the SRMArrayPortConnection table. A method needs to be put in place to refresh persistent data. 543885 4935 Tomcat Found security issues in Apache Tomcat. 544677 4934 6.1.0.9.738 Unable to discover MDS-9148 switch. 544523 4933 SQL script Duplicate Master agent entries found on the Ionix ControlCenter Infrastructure Host Server. 543514 4932 Other - array.rpt The Array Report scale is incorrect under. 543948 4931 6.1.0.9.725 The VMAX Initiator Group was renamed, but SDM Agent kept polling for the old Group name. Thousands of Warnings are posted 'SDMAccessLogix::InitGroups - WARNING - Initiator Group xzurc202001pap_1103216 cannot be found on Symmetrix 000292601387 '. Problem does NOT occur after every Initiator Group rename, but just in a certain set of circumstances. 566244 4930 SE MRLK 7.2 Kit New MRLK support needed to respin Solutions Enabler 7.1. 543683 4929 Database script Sun Feb 20 04:39:40 2011 Errors in file e:/ecc/repository/admin/emcstsdb/udump/emcstsdb_ora_6728.trc: ORA-00600: internal error code, arguments: [kcbnew_3], [3], [1], [388224], [], [], [], [] 4928 Database script The NAS File System capacity data is not displayed for VNX based arrays. 4926 6.1.0.9.720 Ionix ControlCenter 6.1 Host agents fails to discover due to agent crash caused by NULL pvobject. 542874 543504 542376 4924 Database script Unable to run ETl services. It fails with unique constraint. 542605 EMC Ionix ControlCenter 6.1 Update Bundle 14 Read Me 25