JETWAY AIO System User's Manual NO. HA238SAH-H110-QIG Revision: 1.0 Release Date: July 26, 2017 1
Copyright 2017 JETWAY All rights reserved. The trademarks mentioned in this manual are legally registered to their respective owners. Disclaimer Information in this manual is protected by copyright laws and is the property of JETWAY. Changes to the specifications and features in this manual may be made by JETWAY without prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or published in any form or by any means without JETWAY's prior written permission. Documentation Classifications In order to assist in the use of this product, JETWAY provides the following types of documentations: For quick set-up of the product, read the Quick Installation Guide included with the product. For detailed product information, carefully read the User's Manual. For product-related information, check on our website at: http://www.jetwayipc.com/ 2
Table of Contents Overview Of Your Documentation... 4 Box Contents... 5 Specifications... 6 Getting Start With Your PC... 7 Disassembly Instructions... 11 Adjustment of View Angle... 13 Setting Up Your PC...15 Appendix 1 : Precautions and Safety Notices...... 17 Appendix 2 : Packing of Color Box... 20 3
Overview Of Your Documentation Document Type Your documentation contains PDF user manuals to help you perform various tasks. Document Type User s manual provides information about setting up your computer. Non-printed documentation Manual CD (containing this manual) provides information about using your computer, cleaning and maintaining the monitor and the accessories, and the common solutions to problems you may encounter while using your computer. Servicing Do not attempt to service this product yourself, as opening or removing covers may expose you to the risk of electric shock and other hazards. If any of the above mentioned misuse or other accidents such as dropping or mishandling occurs, contact qualified service personnel for servicing. Typographics Special tips, notes, and cautions that appear throughout this manual are designed to ensure that you perform specific tasks properly, preventing unnecessary errors. CAUTION: Indicates important information to prevent potential damage to the unit and data, or personal injury caused by improper use. NOTE: Indicates additional information for particular situation. TIP: Indicates useful information for completing a task. 4
Box Contents Carefully unpack the system and check that the following items were included. If any are missing or damaged, please contact your vender. Retain the box and packing in case of you need to transport your personal computer in the future. The fitted foam packing is ideal for protecting the device during transporting. The appearance and contents of your package may be different from those illustrated be-low due to regional variations. Standard Items AIO Power Adapter Power Cord Screwdriver The box contents above are for reference only and the actual items shall depend on the product package you obtain. The box contents are subject to change without notice. The motherboard image is for reference only. 5
Specifications Model Processor(CPU) Chipset Jetway Intel Kabylake-S/Skylake-S Prozessor LGA 1151 Socket Core i7/ i5/ i3 Support Max. 65W. Intel H110 Express Chipse Operating System Windows 7 / 8.1 / 10 Memory HD drive Graphics Adapter Display I/O port on Board Dual channel SODIMM DDR4 2133MHz 2 x SODIMMs. 32GB Maximum 1 x 2.5" Hard disk(optional) 1 x MSATA (optional) Intel Gen9 Graphics integrated in Intel Processor HDMI display 1920x1080@60Hz (max.) DisplayPort 4096x2304@60Hz (max.) LVDS 24-bits 19 voltage 120 watt power adapter 23.8" wide screen 16:9 HD,LED panel, Max resolution 1920 x 1080 LED Backlight 1 x DC Jack 1 x Gigabit LAN RJ45 1 x DisplayPort out 1 x HDMI out 4 x USB 3.0 port 1 x Line out 1 x MIC Jack Chassis IO Ports 2 x USB 2.0 (Daughter Card) 1 x Card reader (4-in-1) Media card reader 4-in-1 memory card reader(sd/ms/xd/mmc) Network Wireless Network (Optional) Audio Environment Requirement Dimension Net Weight Integrated 10/100/1000 Gigabit Ethernet WLAN 802.11bgn, via Mini-PCIE, WiFi and Bluetooth combo card 2 x Speaker 3 Watt for each Operation Temperature: 0 C - 35 C Storage Temperature: -20 C - 60 C Operating Relative Humidity: 10% ~ 85 % Non-condensing Storage Relative Humidity: 10%~ 85% Non-condensing 564mm(W) x 520mm(H) x 235mm(D) 8.78KG 6
Getting Start With Your PC Touring Your PC This section describes the views and the features of the controls, ports, buttons, components, and connectors of your computer. Front View 2 1 No. Item Description 1 Power Press power button to turn on computer. 2 Indicators LED indicators 7
Rear View 1 2 No Item Description 1 Vents The design of the vents is to prevent the computer from overheating. The internal fans blow hot air away from heat-sensitive components in the computer. Keep the vents clean and free of dirt and dust, as blocking it may cause serious thermal problems. 2 Computer Stand You can adjust the computer stand for the best viewing angle. 8
Right-side View 1 No Item Description 1 USB 2.0 Ports Connect the USB plugs into the USB ports to connect your USB devices, such as MP3 players, digital cameras, keyboard and mouse, or external hard disk drives, etc. 9
Bottom-side View Ver 2.0 No Item Description 1 DC Power Connector Connect the DC power to this port 2 USB3.0 3 DisplayPort 4 HDMI 5 RJ45 LAN Port 6 Line Out Jack USB3.0 The USB port supports the USB3.0 specification. Use this port for USB devices such as a USB keyboard/mouse, USB printer, USB flash drive and etc. DisplayPort DisplayPort is a digital display interface which is primarily used to connect a video source to a display device such as a computer monitor, though it can also be used to transmit audio, USB, and other forms of data. HDMI The HDMI provides an all-digital audio/video interface to transmit the uncompressed audio/video signals and is HDCP compliant. Connect the HDMI audio/video device to this port. The HDMI technology can support a maximum resolution of 1920x1080 but the actual resolutions support depend on the monitor being used. RJ45 LAN Port The Gigabit Ethernet LAN port provides internet connection at up to 1 Gbps data rate.the following describes the states of the LAN port LEDs. Line Out Jack The default Line Out jack. Stereo speakers, earphone or front surround speakers can be connected to Line Out jack. 7 Mic In Jack The default MIC In jack. Microphone can be connected to MIC in jack. 10
Disassembly Instructions Follow steps below to disassemble the AIO. Face Down the AIO Face down the AIO on a smooth surface using a soft material between surface and AIO to protect faceplate. Remove the Back Cover Remove the back cover by removing the 9 fixed screws.(red circle)then pull over back cover. Separate MB Shield Cover Remove the 8 fixed screws and lift the shield cover. 11
Separate the CPU Thermal Module Loosen the 6 fixed screws and lift the CPU thermal module. Separate the DRAM Thermal Module HDD bracket separate Loosen 4 screws to separate HDD-bracket 12
Adjustment of View Angle Tilt Range (degree): Backward 20 ~23 Tilt Range (degree): Forward -5 ~-2 Lift Range: 130mm+/-5mm 13
Pivot function: The screen of the All-In-One PC is 90 degree rotatable. In order to avoid scratching foot stand and bezel, move screen up, then rotate. To adjust the image alignment, follow steps A and B. A. Right-click on the desktop then select Display settings. B. Move cursor to Orientation pull down menu, then click your desired orientation option. 14
Setting Up Your PC This section describes how to set up your computer and make adjustments to the monitor. Preparing To Setup Your PC Before attempting to set up your computer, to protect the computer and monitor, you should: find a flat open area on your desk to position your computer. place a soft item like the computer packaging bag on the desk for padding. It is suggested to install your computer in a space that allows for airflow as restricting the airflow may cause overheating which could impact the performance of your computer. 1. Gently lay the screen face down on a flat clean padded surface. 2. Pick out the stand base body and the lifting stand (Part No.1 & No.2 ). 3. Lock the base to the lifting stand by tightening the screws. 4. Align the screw holes on the back cover of the computer reserved for VSEA Mount with corresponding ones on the stand and lock with the screws. Part2 Part1 5. Carefully lift the computer and adjust the angle of the screen. 15
Turning On Your PC After you finish the installation of your computer, press the Power computer to turn it on. Then follow the on-screen instructions to complete the initial setup. Turning Off Your PC To turn off the system, close all the active windows, and then click the Windows start menu at bottom left corner of your screen, then click power button then click Shutdown button. 16
Appendix 1 : Precautions and Safety Notices Safety Precautions Observe all cautions and safety related notes located inside the display cabinet and on the display chassis. Operation of these displays outside the cabinet or with the cover removed involves a shock hazard from the display backlight s inverter. Work on the display should not be attempted by anyone who is not thoroughly familiar with precautions necessary when working on high voltage equipment. Before returning a serviced display to the customer, a thorough safety test must be performed to verify that the display is safe to operate without danger or shock. Product Safety Notice Many electrical and mechanical parts in this chassis provide special visual safety protection. The protection afforded by them cannot necessarily be obtained by using replacement components rated for higher voltage wattage, etc. Before replacing any of these components, read the parts list included in this manual carefully. The use of substitute replacement parts, which do not have the same safety characteristics, as specified in the parts list may create shock, fire or other hazards, and hence should be prohibited. Service Notes When replacing parts or circuit boards, wrap the wires around terminals before soldering. Keep wires away from high temperature components. Keep cable and their shielding in their original position so as to reduce interference. 17
Handing and Placing Methods Correct Methods Only touch the metal frame of the LCD panel. Do not touch surface of the polarizer. Incorrect Methods Pressing surface of LCD panel with fingers, may scratch the surface of panel. Take out foam on left and right side. Take out the AIO by grasping top of the machine. 18
Place the AIO on clean and soft foam pad. Placing AIO on foreign objects, could scratch the surface of the panel. If panel is placed face down on the lap, that could scratch the surface of the panel. 19 19
Appendix 2: Packing of Color Box Put the AIO in the EPE bag Left EPE cushion Right EPE cushion Stand EPE cushion Stand AIO Body Place the AIO into the carton and then put all accessories into the box and then seal the carton with tape. Power cord and a screw Adapter Stand Base 20