3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 Lutron Catalog Number Manufacturer Description Weight per unit Product Category Features Frequency Range Material Material, Color, and Finish Color Dimensions and Weight Depth Length Width Descriptions Description Product Type Special Features Manufacturer Information Brand Manufacturers Part Number sub brand PJ22BRLGWHL01 Pico RF 434 W Led 2BRL Gloss WH Light Icon PJ22BRLGWHL01 Lutron 0.0500 (lbs/each) Lighting Controls 431.0 437.0 MHz Plastic/Metal WHITE 0.31 LB 2.6 W 1.3 in PICO RF 434 W LED 2BRL GLOSS WH LIGHT ICON Pico RF 434 W Led 2BRL WH Light Icon Flexible and easy to use device that allows the user to control Lutron wireless load-control devices from anywhere in the space. Battery-operated control requires no external power or communication wiring. Provides control for Caseta Wireless controls, Energi Savr Node, Quantum, and myroom systems via a QS sensor module, Maestro Wireless and PowPak module Vive systems, Grafik Eye QS, Homeworks QS, and Maestro Wireless, wireless systems, PowPak modules, RadioRA 2 systems, Serena RF remote control shades, an LUTRON PJ2-2BRL-GWH-L01 Pico Wireless Taxonomies, Classifications, and Categories Category Description Residential dimmers, motion sensors, controls, & photo cells Type Wireless remote control Packaging Carton 1 Weight Per each 0.05
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 Uses, Certifications, and Standards Application LIGHTING CONTROL environmental conditions Relative humidity: less than 90% non-condensing Mounting Stand Alone or Screw-mount Operating Temperature 0 C to 60 C standard FCC, IC, COFETEL, SUTEL, ANATEL
Pico Wireless Remote (for North, Central, and South America) 369612f 1 06.08.15 The PicoR wireless remote is a flexible and easy to use device that allows the user to control LutronR wireless load-control devices from anywhere in the space. This battery-operated control requires no external power or communication wiring. Features Provides control for the following: CasétaT Wireless controls Energi Savr NodeT and QuantumR systems, through the use of a QS sensor module (QSM) Energi TriPakR systems, including: Maestro WirelessR controls PowPakR modules GRAFIK EyeR QS wireless systems HomeWorksR QS wireless systems Maestro WirelessR controls PowPakR modules RadioRAR 2 systems SerenaR RF remote control shades SivoiaR QS wireless systems Control available in a variety of button marking options. Easy reconfiguration for use as: Handheld remote Wall-mount control (with or without faceplate; faceplate adapter kit sold separately) Car visor control (car visor clip sold separately) A table top control (table top pedestal sold separately). Battery-powered. Requires no wiring. 10 year battery life (one CR2032 battery included). Can provide control of blinds, curtains, or lighting devices within a range of 30 ft (9 m) through walls and 60 ft (18 m) line-of-sight. BAA-compliant model numbers available. Add a U prefix to the model number. PicoR wireless remote
Specifications 369612f 2 06.08.15 Regulatory Approvals LutronR Quality Systems registered to ISO 9001:2008. FCC Certified (U.S.A.) IC Certified (Canada) COFETEL Certified (Mexico) SUTEL Certified (Costa Rica) Anatel Certified (Brazil) Power Operating Voltage 3 V- (1) CR2032 Battery (included) Environment Ambient operating temperature: 32 F to 140 F (0 C to 60 C) Maximum 90% non-condensing relative humidity Indoor use only Warranty 1 Year Limited Warranty For additional Warranty information, please visit www.lutron.com/technicaldocumentlibrary/ 369-119_Wallbox_Warranty.pdf System Communication and Capacity Communicates using Radio Frequency (RF) at 431 MHz to 437 MHz. Thousands of system addresses prevent interference between systems. Can be assigned to control blinds, curtains or lighting devices that are within a 30 ft (9 m) range. Can be configured as a scene or zone control in GRAFIK EyeR QS wireless applications. Mounting Considerations Mounting of any RF devices on or in close proximity to a metal surface will drastically reduce the effective range of radio signal transmission or reception. All RF devices must be mounted on non-conductive materials to ensure proper performance.
Model Number For order quantities of 96 pieces or greater of the same model number, bulk packaging may be available. Mounting hardware is not included with bulk packaging. Please contact LutronR Customer Service for availability at 1.888.LUTRON1 (1.888.588.7661). 369612f 3 06.08.15 PJ2-XXXX-GXX-XXX Button Marking Code (see next page) Color Code Button Configuration Code Frequency/Channel Code Frequency/Channel Codes: Code J 431.0-437.0 MHz Button Configuration Codes: Button Configuration Code 2 Button 2B 2 Button with Raise/Lower 2BRL 3 Button 3B 3 Button with Raise/Lower 3BRL 2 Button (2B) 2 Button with Raise/Lower (2BRL) 3 Button (3B) 3 Button with Raise/Lower (3BRL) Color Codes: Gloss Color White Black Ivory Light Almond White / Gray Code WH BL IV LA WG (Top and Raise buttons are White; Preset, Lower, and Bottom buttons are Gray) Continued on next page...
Model Number (continued) 369612f 4 06.08.15 PJ2-XXXX-GXX-XXX Button Marking Code Color Code (see previous page) Button Configuration Code (see previous page) Frequency/Channel Code (see previous page) Button Marking Codes: 2 Button 2 Button with Raise/Lower 3 Button Screen Light (L01) Appliance (L02) Screen (S08) Light (L01) Shade (icons) (S01) Light (L01) 3 Button with Raise/Lower Shade Blackout Sheer Light (L01) Shade (icons) (S01) Shade (text) (S02) Blackout (S03) Sheer (S04) Blind Skylight Drapery Blind Blind (S05) Skylight (S06) Drapery (S07) Blind (S09)
Operation 369612f 5 06.08.15 Indicator LED Flashes to indicate a button press or when unit is in programming mode. Top Button Lights brighten to full intensity and shades / draperies go to open limit. Activates scene 1 when used in scene mode with GRAFIK EyeR QS wireless applications. Preset Button (3B & 3BRL models only) Tap once: Devices go to preset levels / positions. Activates scene 16 when used in scene mode with GRAFIK EyeR QS wireless applications. Press and hold: To save new preset level or position, press and hold for 6 seconds. Raise Button (2BRL & 3BRL models only) Lights increase in intensity and shades / draperies move towards open limit. Lower Button (2BRL & 3BRL models only) Lights decrease in intensity and shades / draperies move towards close limit. Bottom Button Lights dim to off and shades /draperies go to close limit. Activates OFF scene when used in scene mode with GRAFIK EyeR QS wireless applications. Dimensions Measurements shown as: in (mm) 2.6 (66) 0.31 (8) 1.30 (33)
Pico Pedestal Model Number Pedestals sold separately. Available in gloss finish only. 369612f 6 06.08.15 L-PEDX-XX Color Code Capacity Code Capacity Codes: Capacity Code Single 1 Double 2 Triple 3 Quadruple 4 Color Codes: Gloss Color White Black Code WH BL Dimensions Measurements shown as: in (mm) Single Pedestal Pedestals sold separately. Double Pedestal Pedestals sold separately. 1.46 (37) 2.96 (75) 1.77 (45) Triple Pedestal Pedestals sold separately. 3.19 (81) Quadruple Pedestal Pedestals sold separately. 4.59 (117) 6.00 (152)
Mounting Options 369612f 7 06.08.15 Stand Alone Mounting Adhesive-Mount (included with PicoR wireless remote) Screw-Mount (sold separately) Model PICO-SM-KIT 1 2 Note: Kit includes special screws to be used for more permanent mounting and / or for non-smooth surfaces. 1 2 Wallbox Adapter Model PICO-WBX-ADAPT (sold separately) 1 2 3 4 *Wallplate adapter / wallplate sold separately Continued on next page...
Mounting Options (continued) Wall-Mounting Kit Model PJ2-WALL-WH-L01R (sold separately) Kit includes: Pico wireless remote Claro wallplate (with wallplate adapter) Wallbox adapter 369612f 8 06.08.15 1 2 3 4 Mounting to Metal Surfaces Coming Soon (sold separately) 1 2 UP UP UP UP Car Visor Model PICO-CARVISOR-CL (sold separately) 1 2 3