Energy Measurement & Monitoring System Plug & Play metering, monitoring and analysis system Automatic configuration of metering parameters Data collection and reporting
Energy Management and Optimisation For perfect control of your electrical network. allows you to: - Manage consumption - Monitor power quality and electrical events 1 display 1 voltage measurement module current measurement modules current sensors The system is a hub of technological innovations that revolutionises the world of measurements, bringing a high degree of flexibility to installations and making connections and configurations easy. These innovations, together with unrivalled performance in terms of accuracy and functionality, make Digiware the most effective solution for metering consumption and monitoring the quality of electrical energy.
Save Time and Space, Reduce Cost and Improve Accuracy A unique concept that dramatically reduces the wiring/installation time of multifunction meters and current sensors. Control and Power Supply Interface (24 VDC) VOLTAGE MEASUREMENT MODULE CURRENT MEASUREMENT MODULE OR + + D - With display module C - Without display module Digiware U-x Digiware I-3x 3 inputs Digiware I-4x 4 inputs Digiware I-6x 6 inputs VOLTAGE MEASUREMENT MODULES (only one required per system) D U-10 U-20 U-30 + Voltage Multi-measurement U12, U23, U31, V1, V2, V3, f * * * U system, V system * Ph/N unbalance * Ph/Ph unbalance * Power quality THDv1, THDv2, THDv3, THDu12, THDu23, THDu31 * * Individual harmonics U & V (up to row 63) * Voltage dips, interruptions and swells * Alarms On threshold * History of average values * Module configuration software available. Please contact IPD.
Control and Supply Interface D-50 display The D-50 remote display provides: - A local view of the data from the voltage and current modules - Access to the data over Ethernet - A power supply to the modules CURRENT MEASURING MODULES (up to 32 modules can be connected to a system) D + + Voltage Current I-30 I-31 Monitoring I-33 Analysis I-35 I-45 I-60 I-61 Number of current inputs 3 3 3 3 4 6 6 /- kwh, +/-kvarh, kvah Load Curves Multi-measurement I1, 12, 13, In, P, Q, S, PF P, Q, S, PF per phase Predictive power Current unbalance Phi, cos Phi, tan Phi Quality THD1,THD2, THD3, THDin Individual harmonics (up to row 63) Overcurrents Alarms On threshold Inputs / Outputs 2/2 History of average values Module configuration software available. Please contact IPD.
G - Communication Gateway Centralisation of Data G-50 With G communication gateway, all information from metering and measurement devices communicating via the RS485 bus are centralised in a single device and then made available on the Ethernet network via Modbus. The gateway has an embedded WEBVIEW software, allowing real time monitoring of electrical values and analysis of consumption data. WEBVIEW embedded web server CONSUMPTION HISTORY Communication Architecture Digiware Bus RS485 Ethernet Diris Digiware System Diris B-30 Multi-function meter Diris G Gateway
B-30 Multi-Function Power Monitoring Device The B-30 is a power monitoring device in a modular format that communicates via RS485. The 4 x RJ12 independent current sensor inputs of the device allow it to manage several types and number of circuits, for example, 4 x single phase loads or 1 x three phase load + 1 x single phase load. Advantages Plug &Play - RJ12 connections makes wiring easy, reliable and prevents wiring errors. Automatically addressing and configuring the product Class 0.5 in accordance with IEC 61557-12 Multi-circuits. 4 current measuring inputs allow you to configure multiple circuits to optimise the number of measuring points. Optional add-on modules - BACnet IP, BACnet MSTP - PROFIBUS DP protocol - Digital or analogue input/output modules Functions B-30 Multi-measurement Currents, voltage, active/reactive & apparent powers Power factor, frequency Power factor cos Phi, tan Phi Voltage/current unbalance kwh (+/-), kvarh (+/-) kvah Load curves Quality analysis THDV, THDU, THDI Individual/harmonics V, U & I (up to row 63) Voltage dips, cut offs, and surges Overcurrent Alarms 2 inputs (status/pulse)
TE, TR and TF Current Sensors associated to & B-30 Current Sensors TE, TR and TF current sensors ranges can be connected to and B-30 via RJ12 connection. The TE current sensors cover the full range of 5 to 1000A in only 6 frame sizes. TE Solid Core TR Split-Core TF Flexible B-30 or DIGIWARE CONNECTIONS B-30 I module TE Current Sensors RJ12 and RJ45 connection cables are available in various sizes. Please contact IPD. TE - Solid current sensors TR - Split -core current sensors TF- Flexible current sensors Model Current range Model Current range Model Current range TE-18 5..20 a tr-10 25 75 a tf-55 150 600 A TE-18 25 63 a tr-16 32 100 a tf-120 500 2000 A TE-25 40 160 a tr-24 63 200 a tf-300 1600 6000 A TE-35 63 250 a tr-36 200 600 A TE-45 160 630 A TE-55 400 1000 a
DARWIN CAIRNS BRISBANE PERTH NEWCASTLE SYDNEY ADELAIDE MELBOURNE AUCKLAND HOBART QR Code Scan the code above with a smartphone to view the full IPD product range National Customer Support Centre Tel: 1300 556 601 Fax: 1300 550 187 Email: customerservice@ipdgroup.com.au www.ipdgroup.com.au