8 February 2016 Package information 1. Package summary Terminal position code D (double) Package type descriptive code TSOP5 Package type industry code TSOP5 Package style descriptive code SO (small outline) Package style suffix code N (not applicable) Package body material type P (plastic) JEIT package outline code SC-74 Mounting method type S (surface mount) Issue date 16-3-2006 Table 1. Package summary Symbol Parameter Min Typ Nom Max Unit D package length 2.7-2.9 3.1 mm E package width 1.3-1.5 1.7 mm seated height 0.9-1 1.1 mm e nominal pitch - - [tbd] - mm n 2 actual quantity of termination - - 5 -
2. Package outline Plastic surface-mounted package; 5 leads D B E X y H E v M 5 4 Q 1 c 1 2 3 Lp e b p w M B detail X 0 1 2 mm scale DIMENSIONS (mm are the original dimensions) UNIT 1 bp c D E e H E L p Q v w y mm 1.1 0.9 0.100 0.013 0.40 0.25 0.26 0.10 3.1 2.7 1.7 1.3 3.0 2.5 0.6 0.2 0.33 0.23 0.2 0.2 0.1 OUTLINE VERSION REFERENCES IEC JEDEC JEIT EUROPEN PROJECTION ISSUE DTE SC-74 02-04-16 06-03-16 Fig. 1. Package outline TSOP5 () ll information provided in this document is subject to legal disclaimers. N.V. 2016. ll rights reserved Package information 8 February 2016 2 / 5
3. Soldering 3.45 1.95 3.3 2.825 0.45 0.55 solder lands solder resist solder paste occupied area 0.7 0.8 2.4 Dimensions in mm sot753_fr Fig. 2. Reflow soldering footprint for TSOP5 () 5.3 1.475 1.5 (4 ) 5.05 0.45 1.475 solder lands solder resist occupied area Dimensions in mm preferred transport direction during soldering 1.45 2.85 sot753_fw Fig. 3. Wave soldering footprint for TSOP5 () ll information provided in this document is subject to legal disclaimers. N.V. 2016. ll rights reserved Package information 8 February 2016 3 / 5
4. Legal information Disclaimers Limited warranty and liability Information in this document is believed to be accurate and reliable. However, does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. takes no responsibility for the content in this document if provided by an information source outside of. In no event shall be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Notwithstanding any damages that customer might incur for any reason whatsoever, aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the Terms and conditions of commercial sale of. Right to make changes reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. ll information provided in this document is subject to legal disclaimers. N.V. 2016. ll rights reserved Package information 8 February 2016 4 / 5
5. Contents 1. Package summary...1 2. Package outline... 2 3. Soldering... 3 4. Legal information... 4 N.V. 2016. ll rights reserved For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com Date of release: 8 February 2016 ll information provided in this document is subject to legal disclaimers. N.V. 2016. ll rights reserved Package information 8 February 2016 5 / 5