Create orthophotos, 3D models, wireframe models of exteriors, facades or indoor structures. Use it for rehabilitation, 3D documentation, fast measurements or depth and accurate analysis (sections, plans, etc.) - this is just a selection of the many opportunities using Eyesmap -
Result 3D Photomodelling Large Objects EyesMap Capturing Time 8 Min Real façade The architect will be able to obtain accurate 3D models of façades, just using a handheld product like the EyesMap tablet. EyesMap also allows making real orthophotos, which will complete the users reports. Nº of images 25 No. Of pixels 22.658.955 generation+ editing) 40 Min / Autocad Observations Parallel capturing Façade Survey
Plan View incl. image surveyed distances Result No of Pixels 4.137.884 3D Depth Sensor Characteristics Indoor / Large Objects time (automatic aligment+cadedi ting) EyesMap Observations - Capturing Time 7 Min 60 Min / Autocad The user will be able to use the same device indoors as well, in this example using the depth sensor. In a short period of time it has been possible to obtain the stairs geometry. Plan View Profile View Stairs Geometry
EyesMap allows the user to obtain the wireframe structure of buildings using only a few images. Can easily define the polylines right in the images, then export to a CAD package for final editing. Real image 1 Real image 2 Real image 3 Real image 4 Wireframe Model Front View Result Wireframe Model 3D Photomodelling LargeObjects EyesMap Capturing Time 5 Min Nº of images No. Of pixels 4 (Lines) Wireframe Model Side View Wireframe Model Profile View time (Lines definition and export) 20 Min / Autocad Building Geometry
Real image 1 Real image 2 Real image 3 Real image 4 Plan View Here is shown a complete 3D model of a monument (360º). The model has been captured taking images from all around the object, obtaining its full geometry and texture. Result 3D model 3D Photomodelling Medium Objects Capture Time Nº of images 30 External Camera (Canon 550D) 9 Min No. Of Pixels 12.081.664 generation+ editing) 35 Min Side View Back View Detail View SW Edit Observations 360º Model Monument
Sample of images taken Real Picture Modelling of small architectonical details. In the example, an ornament incrusted in a wall has been modelled. The result can be use to document and to complete the buildings reports or to check for pathologies in façades. Result Capturing Time 5 Min 3D Photomodelling Nº of images No. of pixels 13 13.576.420 medium Objects generation+ edition) 15 Min Front View Detail View External Camera (Nikon 1 V3) Ornament
The user can choose between different techniques to obtain the best results depending on the users needs. Crack measurements Result 3D model / Coordinates 3D Photomodelling / Point to Point Medium Objects EyesMap Local Coordinates Real interface Sample of Images Taken This example shows the combination of using photogrammetry point to point and 3D photomodelling to measure cracks. Capture Time Nº of images Nº of points generation/ control points assignation + editing) Observations 4 Min 4 - Point to Point 10-1.721.977 35 Min Combination of two techniques Cracks