Danfoss Turbocor Learning Center

Similar documents
Danfoss Turbocor Learning Center

Arctic Chiller Group Training Programs

Arctic Chiller Group Training Program

Danfoss Food Retail Winter/Spring

Radware. Training Policies V001.70

2001 CUSTOMER TECHNICAL TRAINING CONTROLS SCHEDULE

October 21-23, 2013 Holly Springs, NC

Green Building/LEED AP Building Design & Construction Exam Preparation

Fujitsu Training Academy 2015/2016 Course Overview & Travel Guide TRC Sales Training Center Garden Grove, CA Contractor & Distributor Edition

October 9-11, 2012 Lenexa, KS

Overview of Danfoss Turbocor. Danfoss Turbocor Learning Center M110_v4

CONTRACTORS ASSOCIATION OF WEST VIRGINIA PRESENTS THE

NEBB BUILDING SYSTEMS COMMISSIONING TECHNICIAN (BSC CxCT) SEMINAR

MAKING PROPERTIES AND PROFITS

EXHIBITOR MANUAL. Exhibit Company: Stagevision, Inc

NEBB TECHNICAL RETRO-COMMISSIONING SYSTEMS (RCX) SEMINAR OF EXISTING BUILDING RC X SEMINAR DATES MONDAY WEDNESDAY SEPTEMBER 26 28, 2016

Energy Efficient Large Commercial System Design.

NEBB BUILDING SYSTEMS COMMISSIONING TECHNICIAN (BSC CX CT) SEMINAR

NEBB SOUND AND VIBRATION MEASUREMENT SEMINAR OCTOBER 22-26, 2018

Phone: Phone: APPLICATION FORM. The 2017 ARCCOMS EBBS Sofia Workshop. 19th 21st November 2017

July 2012, issue 1-9a. 4RF Limited Introduction and T&C. Training. Contents. 1. Overview 2 2. Terms 3 3. Aprisa XE training syllabus 5

CONTRACTORS ASSOCIATION OF WEST VIRGINIA PRESENTS THE

Configuration, Installation, Commissioning, Troubleshooting, Operation & Maintenance

Contractor Certified Mechanics Training From the Professionals

Cleanroom Performance

2015 KPS Factory Service Training Schedule January-June. *Industrial Gen and Controls. Commercial Marine Certification

Twin-Screw Compounding Workshop October 6-8, 2009 Program Overview Adam Dreiblatt Polymers Center of Excellence

EXHIBITOR MANUAL. Electrial/Audio Visual: Fairchild Multimedia David Boyle (02)

SAVE THE DATE MARCH Basics of St. Charles, MO CLICK HERE to register online!

SENNEBOGEN Factory Training *

Welcome.. TADANO America Corporation 4242 West Greens Road, Houston, TX More Training Information can be found here.

/ I N S T I T U T E t r a i n i n g c a t a l o g s p r i n g 2 019


Programmable Logic Training Courses

TRIBAL WATER AND WASTEWATER OPERATOR CERTIFICATION PROGRAM TRAINING ANNOUNCEMENT WATER DISTRIBUTION LEVEL 2 TRAINING AND CERTIFICATION EXAM FOR WATER

Oil & Gas Industry Quality Management System Auditor/ Lead Auditor Training

1 st Annual Meeting for Abacus Latin America Members

NEBB Sound and Vibration (S&V) Certified Professional Seminar

2015 Training Catalog

JEFFERSON COLLEGE COURSE SYLLABUS HRA249 COMMERCIAL REFRIGERATION SYSTEMS. 5 Credit Hours. Prepared by William Kaune November 30, 2010

CWE Renewal Program Information

Cleanroom Performance

National Recreation and Park Association Certified Playground Safety Inspector Course & Exam

2 nd Annual Meeting for Abacus North America Members

EXHIBITOR MANUAL. Contact Information EBT Event (ATMIA) 2260 E Byrum Circle Brandon, SD Telephone:

Sage Learning Services

Florida Association for Pupil Transportation

Building Automation Training Center

Training Programs. Required Foodservice Training & Certification. Recommended Alcohol Training & Certification. South Dakota Retailers Association

2019 Educational Courses Catalog

Training Opportunities

Gasoline Engines And Support Systems Certification

Water Distribution Level 1 January 8 12, 2018

Council of Colleges of Acupuncture and Oriental Medicine Clean Needle Technique Course Application Packet September 7, 2019, Hong Kong

Please read all information and instructions before completing the application form.

NEBB BUILDING SYSTEMS COMMISSIONING SEMINAR OCTOBER 15-17, 2018

TECHNICAL TRAINING CATALOG

Medical Device Seminar Bringing your medical products to United States of America (USA)

EXHIBITOR MANUAL Exhibitor Manual Conference web site. Contact Information ATMIA Event Staff

UF-IFAS Jackson County Extension Office Marianna, FL 32448

SCADAvantage Training Guide

Invitation to Exhibit

Polycom training will help you get the most from your Polycom solutions

OPIS CONFERENCES FAQs

Workshop Form (Required)

Featuring California-Specific SWANA MOLO Training In Today s World, You Can t Afford NOT To Be Trained & Certified

Norman S Wright Company Manufacturer s Representatives. Spring 2015 Norman S. Wright Arizona Event Schedule

Certification Landscape Industry Certified Technician Exterior

EXHIBITOR MANUAL Exhibitor Manual Contact Information EBT Event (ATMIA) Hotel: Renaissance Glendale Hotel & Spa

Getting There. Contact Us: (877) or Contact Information Getting There

NEBB FUME HOOD PERFORMANCE TESTING SEMINAR JUNE 5 & 6, 2017

July-September 2016 Daytime Schedule

Train-the-Trainer. PTI Course Propane Training Institute. Location: A 2-DAY CERTIFICATION COURSE INSTRUCTION & CERTIFICATION TO:

DELEGATE INFORMATION PACK 2019

raining Meeting your training needs and CPE requirements opportunities July-September Group-Live Course Group Internet- Based Course

OPIS CONFERENCES FAQs

Includes: FREE Training for Tribal Personnel Opportunity for FREE Professional Certification FREE Wastewater Collection Level 1 Certification Exams

GDC 2015 GROUP REGISTRATION DEADLINE FOR REGISTRATION» EARLY ENDS 1/21 REGULAR ENDS 2/25 W/GROUP DISCOUNT $1, $1,795 50

MULTIVAC Canada University

Annual Certification School & Business Meeting. May 27-30, TradeWinds Island Grand 5500 Gulf Blvd St Pete Beach, FL 33706

NEBB Basic Building Systems Commissioning Certified Professional Seminar and Exams

Welcome to the Hyster Training Knowledge Center


Advanced Systems, Inc. Registration Form. (Please complete all information)

Polycom training will help you get the most from your Polycom solutions

NEBB Technical Retro-Commissioning for Existing Buildings (RCx) Seminar Monday, August 13, 2018 Thursday, August, 16, 2018

TECHNICAL TRAINING FOR CARESTREAM HEALTH CUSTOMERS/DEALERS/ SERVICE PARTNERS. Carestream Customer DRX-Revolution Troubleshooting 1

SEMINAR FOR CLEANROOM CERTIFIED PROFESSIONALS October 4-6, 2010

INTRODUCTION TO SUBSTATION DESIGN

2019 UTC Region 3 Spring Meeting and EXPO Columbia, SC, March 6-8, 2019

Pile Driving Contractors Association and Pile Dynamics, Inc.

Superhero Level - $10,000

January-March 2016 Daytime Schedule

ATTENDEE REGISTRATION POLICY

Certified Technical Training for Emerson Flow Instruments. Helping you to maximize your Flow instrument investment

DISTRIBUTION FEEDER DESIGN

TÜV Rheinland Functional Safety Program

CFSE / CFSP Training & Certification

Certified Building Commissioning Professional (CBCP )

Vibration Training Program

Transcription:

ue 2011 Danfoss Turbocor Learning Center TRAINING CATALOG

2

Table of Contents 1. Introduction... 4 2. Danfoss Turbocor Learning Center... 4 3. Danfoss Turbocor Instructors Profile... 5 4. Registration... 6 Select a course... 6 Register... 6 5. Payment... 6 Purchase Order for the course fee... 6 Payment... 6 Confirmation of Registration... 6 6. Cancellation / Confirmation Policy... 7 7. Travel / Transportation... 7 8. Hotel... 7 9. Of Special Interest in Tallahassee... 7 10. Training... 8 11. Training Materials... 8 12. Factory Tours... 8 13. Questions... 8 14. Tallahassee Community College (TCC)... 9 15. Training Courses...10 Compressor Features & Advantages...11 Compressor Advantages & Market Position 1...12 Compressor Theory & System Design 1...13 Compressor Theory & Applications 1...14 Compressor Operation, Service & Repair 1...15 Compressor Basics & Maintenance...16 Compressor Basics, Service & Repair 1...17 16. Training Registration Form...19 3

1. Introduction Danfoss Turbocor Compressors, Inc. (DTC) makes the world's first oil-free, magnetic bearing centrifugal compressor designed for the commercial heating, ventilation, and air conditioning (HVAC) industry. Using a combination of aerospace, magnetic bearing, and digital electronic technologies, its compressors are used in air and water-cooled chillers and rooftop units. The DTC compressor is one of the most energy efficient compressors in the industry. Hotels, hospitals, industrial facilities, office buildings, and schools are primary users of its products. DTC operates a 65,000 sq. ft., stage-one manufacturing plant in Tallahassee, Florida, USA and maintains offices in North America, Europe, Australia and Asia. For an introduction to the Turbocor compressor, please visit our website at www.turbocor.com. 2. Danfoss Turbocor Learning Center DTC offers a series of training classes designed to provide the necessary information for selling, operating and servicing Turbocor products and their applications. We have made every effort to create a training program that is both informative and enjoyable. It consists of a selected schedule of learning sessions that we have developed according to your requirements. Highly qualified and field-experienced instructors of the DTC Learning Center will provide you with a high level of training. 4

3. Danfoss Turbocor Instructors Profile Arjen van den Hoek Arjen has over 20 years of experience in the HVAC industry. Prior to joining DTC as a Test Engineer in 2001, Arjen worked as a Project Engineer in the Building Automation Industry and as Project Manager of Controls in the Process and Industrial Automation Industry. In his present position as a Senior Customer Support Engineer in Europe, Arjen provides onsite commissioning support for new OEMs, trains OEMs and their customers on the operation of the Turbocor compressor, and assists customers in application issues. Also, he contributes in developing new training material and manuals. Bruce White For more than 40 years, Bruce has worked in the Australian HVAC industry including more than 20 years with a major manufacturer of all types of equipment from centrifugal chillers to ½ hp window A/Cs, and 15 years in service management and engineering roles. Prior to joining DTC in 2008 for applications and training, Bruce spent nine years in Engineering and Application at a major Australian chiller manufacturer. Bruce currently manages the Customer Support and Service department in Tallahassee. Giuseppe Piol Giuseppe has over 14 years of experience in the HVAC industry. Prior to joining DTC in 2009, Giuseppe worked as European After-Sales Manager, Trainer, and Support Engineer for a leading European Air-conditioning Equipment Manufacturer. In his present position as a Technical Customer Support Engineer in Europe, Giuseppe provides on-site commissioning support for new OEMs, trains of OEMs and their customers on the operation of the Turbocor compressor, and assists customers in application issues. Heath Whiddon Heath has over 12 years of experience in the HVAC industry. As a field service technician, he installed, maintained, serviced, and repaired all types and brands of HVAC equipment including chillers, roof-top packaged systems, computer room cooling systems, pumps, and cooling towers. He has worked on most types of compressors including centrifugal, screw, reciprocating, and scroll. Since joining DTC in 2008 as a Compressor Technical Specialist, Heath provides global and regional technical support and training for owners, operators, and contractors. Furthermore, he contributes in developing and maintaining our service literature. 5

4. Registration To attend a course listed in this training catalog, please follow the instructions below: Select a course Review the course descriptions. To obtain the most effective training, carefully match your participants with the appropriate courses by evaluating the course content and objectives. Register Register by completing the registration form and send to: DTC Learning Center 1769 E. Paul Dirac Drive Tallahassee, FL 32310 Ph: +1 (850) 504-4800 Fax: +1 (850) 201-2901 E-mail: training@turbocor.com Class size is limited and is offered on a first-registered, first-attend basis. If a class is full, we will inform you about attending an alternate course date. DTC reserves the right to change class dates or cancel classes. 5. Payment Purchase Order for the course fee After we receive your completed registration form, we will confirm receipt and class availability via e-mail. However, you are not considered registered until we receive a Purchase Order for the course fee either faxed to +1 850-201-2901 or emailed to training@turbocor.com (please include the name and email address of your Accounts Payable Supervisor). Payment Payment in advance of the training course is mandatory; otherwise the participant will not be admitted. Confirmation of Registration A confirmation of registration will be sent to the participant by email after receipt of your payment. Please contact us if you do not receive a registration confirmation two weeks prior to the start of class. Do not make travel reservations until you have received our confirmation that you are registered. 6

6. Cancellation / Confirmation Policy Please confirm your class reservation at least 2 weeks prior to course start date. Cancellations must be made at least 30 days prior to the course start date to receive a full refund. Cancellations made three weeks prior to the course start date will receive a 50% refund. No refunds will be issued for cancellations made 10 working days prior to the course start date. An alternate person may use a confirmed space without penalty and substitutions may be made up until the start of class. DTC reserves the right to make changes to the course content or schedule. In the unlikely event of a schedule change or cancellation of a training class, DTC is not responsible for associated fees. 7. Travel / Transportation Travel to and from the training location is the responsibility of the participant. NOTE: If you are traveling outside your country of origin, you must have a valid passport and driver s license. 8. Hotel A list of hotels in Tallahassee with DTC preferred rates can be provided upon request with the class registration confirmation. Please make your own hotel arrangements. 9. Of Special Interest in Tallahassee If you are interested in staying longer than the course duration, we recommend that you check out our beautiful city and some of the wonderful things to do and see here. Take a look at our visitors bureau website at www.visittallahassee.com. 7

10. Training Training is offered at the following locations: Tallahassee Community College (TCC) Advanced Manufacturing Training Center 3958 West Pensacola Street Tallahassee, FL 32304-2895 TCC is located close to the DTC plant. Other location in Tallahassee Depending upon availability of Tallahassee Community College, training may also be held at another location in Tallahassee. This will be confirmed prior to the training. Training at your facility For your convenience, DTC Learning Center also provides training at your facility. Class fees will be established based on expenses and the number of participants. Travel, accommodation and meal expenses for the instructor will be invoiced to the customer plus a 10% service fee. We are flexible in time, but dates are contingent on instructor availability. Classes begin at 8:00 a.m. and end at 5:00 p.m. (all days). Half day training is completed by noon. Dress code is business casual. 11. Training Materials Participants attending our classes will receive relevant training materials. It is highly recommended that all attendees bring a laptop to facilitate class training and to download required DTC service and start-up programs. 12. Factory Tours Factory tours are available during your stay in Tallahassee. If you require additional information, please feel free to contact us via e-mail at training@turbocor.com or call at +1 (850) 504-4800. Note: Open toe shoes are prohibited in manufacturing area. Safety glasses will be supplied. 13. Questions If you require additional information, please feel free to contact us via e-mail at training@turbocor.com or call us at +1 (850) 504-4800. 8

14. Tallahassee Community College (TCC) Training center 9

15. Training Courses BASIC COURSES Code Course Title Course Audience 101 Compressor Features and Advantages Specifying Consultants 102 Compressor Advantages and Market Position 1 OEM Sales Staff (product training) 103 Compressor Theory and System Design 1 OEM Design Engineers 104 Compressor Theory and Applications 1 OEM Engineers 105 Compressor Operation, Service and Repair 1 OEM Service Technicians 106 Compressor Basics and Maintenance Plant Operators, Owners and Maintenance Techs 107 Compressor Basics, Service and Repair 1 Factory Certified Service Providers All courses are on demand except Course 105 which is offered on a regular basis (every 3 months) in TLH. Please contact DTC to arrange the dates. For new OEMs, the first training in Tallahassee is free of charge. OEMs receive one training course free of charge per year at DTC in Tallahassee. 10

COMPRESSOR FEATURES & ADVANTAGES COURSE 101 TARGET GROUP PRE-REQUISITE CONTENT LEARNING OUTCOME DURATION CLASS SIZE COURSE FEE Specifying consultants HVAC specifying engineer The course includes a basic overview of the compressor and its integrated features, advantages and capacity range. Participants will explore case studies and receive an outline of financial and energy savings related rebate programs. Gain an overall view of the company, installed base, production, offices, number of employees, etc. Understand the compressor s basic operating characteristics Know the basic applications Understand efficiency comparison and elaborate case studies Know product capacity range and models Understand energy saving advantages and rebate programs 1 day 8 20 people Free Fee includes relevant training material; Lunch & coffee breaks 11

COMPRESSOR ADVANTAGES & MARKET POSITION 1 COURSE 102 TARGET GROUP OEM sales staff PRE-REQUISITE CONTENT Chiller Sales person sponsored by the OEMs The course covers a basic understanding and overview of the Turbocor compressor technology, with the focus on compressor features and advantages. Participants will explore the technology behind this new generation compressor, and its potential including the advantages of centrifugal compression with oil-free technology. An outline of financial and energy related rebate programs, green stars, Lead points and converting savings to carbon credits is also covered. It also includes exploring case studies on various applications. LEARNING OUTCOME DURATION CLASS SIZE COURSE FEE Gain an overall view of the company, installed base, production, offices, number of employees, etc. Understand the compressor s basic operating characteristics Know the basic applications Explain efficiency comparison Know product capacity range and models Understand the main market drivers in the industry Explain the above to third parties 1 day Up to 20 people Free Fee includes relevant training material; Lunch & coffee breaks 12

COMPRESSOR THEORY & SYSTEM DESIGN 1 COURSE 103 TARGET GROUP PRE-REQUISITE CONTENT OEM design engineers Engineer with minimum of two years applied system design This course offers a fundamental understanding of the Turbocor compressor technology, application guidelines and engineering required for the design of new Turbocor powered OEM equipment. You will gain knowledge of monitoring tools needed to access compressor operation data and the basic compressor control system. It also provides the troubleshooting experience, and teaches complete commissioning and start-up procedures, as well as diagnostic procedures. The course also covers all aspects of system design guidelines and best practices used in designing DTC compressor into systems. This includes working on specific customer cases, providing advice and answering relevant questions. LEARNING OUTCOME DURATION CLASS SIZE COURSE FEE (PER PERSON) Understand the compressor s operating characteristics Know and recognize application compressor interaction Identify the functional components of the compressor Know the compressor applications Understand the application limits Perform mechanical and electrical compressor integration into the chiller package Perform controls compressor integration into the chiller package Complete commissioning and start-up procedures 2 days 6 10 people $ 700 Fee includes relevant training material; Lunch & coffee breaks 13

COMPRESSOR THEORY & APPLICATIONS 1 COURSE 104 TARGET GROUP PRE-REQUISITE CONTENT OEM engineers Engineer with minimum of two years applications experience Provides a fundamental and foundational understanding of the Turbocor compressor technology and application guidelines. Gain knowledge of the tools needed to access compressor operation data and provides an understanding of the compressor control system. Also, learn service and maintenance instruction information that can be incorporated into industry standard OEM Installation, Operations and Maintenance documents. It also covers all aspects of the system design guidelines. This includes working on specific customer cases, providing advice and answering relevant questions. LEARNING OUTCOME DURATION CLASS SIZE COURSE FEE (PER PERSON) Identify the functional components of the compressor Understand the compressor s operating characteristics Know the compressor applications Understand the application limits Know and recognize application and compressor interaction Perform efficiency comparison and elaborate case studies Understand mechanical, electrical and controls Perform compressor monitoring and basic maintenance 2 days 6-10 people $ 700 Fee includes relevant training material; Lunch & coffee breaks 14

COMPRESSOR OPERATION, SERVICE & REPAIR 1 COURSE 105 TARGET GROUP PRE-REQUISITE CONTENT OEM service technicians HVAC technician with minimum of three years chiller experience The course covers a basic understanding of the Turbocor compressor technology, major component functions and application guidelines. It provides knowledge of tools needed to access compressor operation data such as Service Monitoring Tool (SMT software) and provides an understanding of the compressor control system. The course also includes compressor commissioning procedures, troubleshooting, and maintenance guidelines and compressor service requirements. LEARNING OUTCOME DURATION CLASS SIZE COURSE FEE (PER PERSON) Understand the compressor s basic operating characteristics Identify the functional components of the compressor Set up Service Monitoring Tool (SMT software) and monitor compressor operation Perform basic troubleshooting and diagnostic procedures Understand commissioning and start-up procedures Understand bearing calibration procedures Understand required maintenance and service requirements 2 days 6-10 people $ 700 Fee includes relevant training material; Lunch & coffee breaks 15

COMPRESSOR BASICS & MAINTENANCE COURSE 106 TARGET GROUP PRE-REQUISITE CONTENT Plant Operators, Owners and maintenance staff Minimum of one year plant operation experience The course covers the basics of the Turbocor compressor operation, its monitoring program, and provides a fundamental understanding of faults; fault resolution and compressor re-start procedures. In addition, the course provides the Plant Engineers an understanding of the compressor s operational characteristics and an explanation of how to use the monitoring program to evaluate the essential functions of the compressor. The OEM supplier provides the additional instruction required for the other operating components (i.e. controls, valves, etc.) of the manufactured equipment. LEARNING OUTCOME DURATION CLASS SIZE COURSE FEE (PER PERSON) Understand the compressor s basic operating characteristics Understand safety precautions of the compressors Set up Service Monitoring Software (SMT) and monitor compressor operation Perform required maintenance procedures Instruct the other Plant Operators 1 day 3 8 people $ 700 Fee includes relevant training material; Lunch & coffee breaks 16

COMPRESSOR BASICS, SERVICE & REPAIR 1 COURSE 107 TARGET GROUP PRE-REQUISITE CONTENT Factory certified service provider HVAC Technician with minimum of three years chiller experience The course covers a basic understanding of the Turbocor compressor technology, application guidelines and engineering required for the design of new Turbocor OEM equipment. It provides knowledge of the tools needed to access compressor operation data and provides an understanding of the compressor control system. It also describes troubleshooting, maintenance and service requirements for the compressor portion of the mentioned equipment. Note: This course does not provide any chiller system service training. LEARNING OUTCOME DURATION CLASS SIZE COURSE FEE (PER PERSON) Understand the basic compressor operating characteristics Identify the functional components of the compressor Set up monitoring software (SMT) and monitor compressor operation Perform basic troubleshooting and diagnostic procedures Understand commissioning and start-up procedures Understand bearing calibration procedures 2 days 6-10 people $ 1,400 Fee includes relevant training material; Lunch & coffee breaks 17

ue Tallahassee, FL Map TLH Community College Advanced Manufacturing Training Center 3958 West Pensacola Street Tallahassee, FL 32304-2895, USA 1769 E. Paul Dirac Drive Tallahassee, FL 32310 USA Tallahassee Regional Airport Residence Inn Tallahassee University at the Capitol Courtyard Tallahassee Capital Homewood Suites by Hilton 18

ue 16. Training Registration Form 19

This publication contains the most current training information as of this printing. Danfoss Turbocor Compressors Inc. reserves the right to make changes without notice., 1769 East Paul Dirac Drive, Tallahassee, Florida 32310 Phone: 1-850-504-4800 Fax: 1-850- 201-2901 www.turbocor.com C-TR-001 May 2011 20