Corning Cable Systems LANscape Pretium EDGE (Evolved -Density, Growth -Enabled) Solutions are high density pre -terminated optical cabling systems that simplify installation and improve performance in data centre environments. Pretium EDGE Solutions provide increased system density and offer the highest port density in the market. The modular system approach with pre -terminated components allows for reduced installation time and faster moves, adds and changes (MACs). Corning Cable Systems factory -terminated solutions provide improved system performance, ensure component compatibility and yield consistent quality. Pretium EDGE consists of optical trunks and extender trunks, modules, harnesses, housings and jumpers with reduced cable diameters and bending radii, enabled by ClearCurve optical fibre. ClearCurve Multimode and Single -mode fibres are developed and manufactured by Corning to provide superior bend performance and resilience in fibre optic cabling systems. Innovative fibre design in core, cladding and coating ensures leading performance with full compatibility to the most recent fibre standards. Part Number: H937912QLZ1-Z1650 The MTP -based fibre optic cabling systems follow an easy snap -and -latch approach from the installation of modules and cables to the connection of system components at the fiber interface. There is no time -consuming fiber preparation and termination, and there are no consumables or piece parts. tools are required other than a screwdriver for installation of hardware. Pre -terminated trunk cabling systems fitted with a factory -installed protective pulling grip are routed through the cabling pathways and spaces. Once deployed, the pulling grip is removed and the MTP connectors on both ends are plugged into connector panels or modules. High -density MTP connector -based trunk systems plug into breakout modules or harnesses for a simple, fast -to - deploy, modular solution with easy scalability. Modules and harnesses conveniently load into Pretium EDGE Solutions hardware, and correct fibre polarity is guaranteed throughout the systems link by the Universal Wiring scheme. Pretium EDGE Solutions products are packaged in recycled material, and the packaging is 100% recyclable. Page 1 Revision date 2011-07-08
2 9.41 115 2 Features and Benefits Break out 12-fibre MTP terminations into LC duplex connectors Connect to trunks through a pinned MTP Connector Plug into dual-fibre electronics ports with LC uniboot duplex connectors Occupy less space than 6 duplex jumpers Improve airflow for cooling efficiency Enable higher density in equipment patch panels Ease handling of cable connections on high-fibre count SAN directors and switch blades Feature custom-engineered taper to match electronics port pitch Facilitate neat routing through unique snap-on features Are available in two lengths - short harness legs for minimal cable slack - long harness legs for mounting flexibility within a cabinet Standards Intermateability TIA/EIA-604-5 / TIA/EIA- 604-10 Specifications General Specifications Flame Rating Fibre Category LSZH/FRNC 50 µm MM () Page 2 Revision date 2011-07-08
Temperature Range Operation -20 C to 60 C Installation and assembley -5 C to 50 C Storage -25 C to 70 C Design - Connector Connector Type Ferrule Polishing Housing material Housing Colour Boot Type Boot Colour Keyed MTP (pinned) Composite UPC Composite Turquoise individual Black Mechanical Specifications - Connector Durability Tensile strength jacketed cable 0.2 db 200 rematings, FOTP-21 44 N Optical Specifications - Connector A Insertion loss, typical Insertion loss, max. 0.5 db 0.5 db Page 3 Revision date 2011-07-08
Design - Connector B Connector Type 2 Ferrule Polishing Housing material Housing Colour Boot Type Boot Colour Keyed Ceramic UPC Composite Black uniboot Turquoise Mechanical Specifications - Connector B Durability Tensile strength jacketed cable 0.2 db 500 rematings, FOTP-21 44 N Optical Specifications - Connector B Insertion loss, typical Insertion loss, max. 0.35 db 0.5 db Cable Design Fibre Count 12 Outer diameter 4.6 mm Outer jacket colour Turquoise Outer jacket material LSZH/FRNC Min. Bend Radius Installation 46 mm Min. Bend Radius Operation 23 mm Crush Resistance 750 N/10cm Tensile strength 400 N Page 4 Revision date 2011-07-08
Furcation - Connector A Legs Count 1 Leg Length 1650 mm Leg Diameter 2.9 mm Fibre Count 12 Furcation - Connector B Legs Count 6 Leg Diameter 2 mm 87 mm Fibre Count 12 Plug Type Size 1 EDGE Plug Dimensions 40 x 21 x 15 mm Pulling grip Pulling grip Pulling grip - Connector B Pulling grip - Connector B Chemical characteristics RoHS Free of hazardous substances according to RoHS 2002/95/ EG Page 5 Revision date 2011-07-08
Ordering Information Order Number Product description Length Weight H937912QLZ1-Z1650 Pretium EDGE Solutions Harness,, 12 fibers, Cisco 9512/9412 LC stagger, 1.65 m 1.65 m Shipping Information Units per Delivery 1/1 Corning Cable Systems GmbH & Co. KG Leipziger Strasse 121 10117 Berlin, Germany TEL: 00800-2676-4641 (00800-CORNING1) FAX: +49-30-5303-2335 www.corning.com/cablesystems/emea A complete listing of the trademarks of Corning Cable Systems is available at www.corning.com/cablesystems/emea/trademarks. Corning Cable Systems is ISO 9001 certified. 2011 Corning Cable Systems. All rights reserved. Page 6 Revision date 2011-07-08