Description The LFS-SAL small area light is the first of its kind in Lumecon s LED Fire Series. Combining a sleek fixture design with energy efficient performance allows this fixture to be used in parking lots, roadways, pathways and general area lighting applications. Technical Specifications Input Voltage: 120-277V or 347-480V. Housing: Die cast aluminum housing and front frame with textured architectural bronze powder coat finish over a chromate conversion coating. Housing features an integrated heat sink and driver compartment built into the fixture design. Optional photocell accessory available. Lens: Tempered clear glass lens. Mounting: Mounting arm designed for a square / round pole (standard). Additional mounting options include a pole mounting arm adaptor. Effective Projected Area (EPA): 0.51 ft² (0.78ft² with arm) Color Temperature: 3000K WW, 4000K NW (standard), 5000K CW. LED Lifetime: All LED s are rated for a minimum of 100,000 hours of continuous operation at ambient temperatures from -40 F/-40 C to 95 F/35 C. Color Rendering Index (CRI): Minimum of 70 or higher. CRI 80+ or 90+ available upon request. Dimming: 0-10V standard dimming capability. Surge Protection: Thermally protected 20kA/ 40kV varistor type surge suppressor is included and meets ANSI C136.2-2015: Extreme Level. Also meets IEC61643-11 Class II / EN61643-11 Type 2, and US Dept of Energy MSSLC Model Spec for surge protection. The device is wired in series with the luminaire input power in order to interrupt power to the luminaire when consumed, protecting the LED power supply and circuit boards from additional electrical surges. Lumecon ETD System: The enhanced thermal dissipation system engines are thermally bonded to provide maximum thermal dissipation to the exterior of the fixture to ensure long life. To protect the light engine panel from moisture and corrosion, the LED light engine panel is uniformly coated with a UV stabilized acrylic polymer resin that meets MIL and ASTM dielectric standards, UL, and IPC standards for flammability, moisture resistance and thermal shock. Certification Data: CSA Listed to UL 1598, UL 8750 and CSA 22.2 No. 250 for Wet Locations. *Full compliance and test documentation is available for TM-21, LM-79, LM-80, ETL Listing to UL1598 and UL 8750. DesignLights Consortium (DLC) Qualified Product: Unless noted, not all versions of this product may be DLC qualified. For a complete list of Lumecon DLC Qualified Products visit: www.designlights.org. Manufacturing Origin: US Manufactured and Assembled. Buy American: Meets Buy American requirements within the ARRA. Warranty: 10 Year L70 performance based warranty. For full warranty terms, please visit our website: www.lumecon.com Dimensions & Weights Model Width Height Length Weight LFS-SAL 13.39 3.58 15 15 lbs.
Performance Data Model Watts Equiv LFS-SAL-30 LFS-SAL-30 LFS-SAL-30 LFS-SAL-30 LFS-SAL-60 LFS-SAL-60 LFS-SAL-60 LFS-SAL-60 LFS-SAL-80 LFS-SAL-80 LFS-SAL-80 LFS-SAL-80 LFS-SAL-110 LFS-SAL-110 LFS-SAL-110 LFS-SAL-110 LFS-SAL-125 LFS-SAL-125 LFS-SAL-125 LFS-SAL-125 LFS-SAL-150 LFS-SAL-150 LFS-SAL-150 LFS-SAL-150 Delivered Lumens Efficacy 31W 250W HID 3,998 Lm 130 LPW 30W 250W HID 3,940 Lm 130 LPW 31W 250W HID 3,929 Lm 126 LPW 31W 250W HID 4,040 Lm 130 LPW 60W 250W HID 7,881 Lm 132 LPW 60W 250 HID 7,644 Lm 127 LPW 60W 250W HID 7,682 Lm 129 LPW 60W 250W HID 8,007 Lm 134 LPW 78W 400W HID 10,262 Lm 132 LPW 78W 400W HID 10,034 Lm 129 LPW 78W 400W HID 9,936 Lm 127 LPW 78W 400W HID 10,426 Lm 133 LPW 110W 400W HID 13,967 Lm 127 LPW 99W 400W HID 12,444 Lm 125 LPW 107W 400W HID 13,383 Lm 125 LPW 109W 400W HID 13,976 Lm 128 LPW 125W 400W HID 15,046 Lm 120 LPW 123W 400W HID 14,170 Lm 115 LPW 123W 400W HID 14,170 Lm 115 LPW 123W 400W HID 14,170 Lm 115 LPW 147W 400W HID 17,720 Lm 121 LPW 145W 400W HID 16,111 Lm 111 LPW 147W 400W HID 17,520 Lm 119 LPW 143W 400W HID 17,299 Lm 121 LPW
Ordering Information LFS-SAL Options / Ordering Example: LFS-SAL-110-DB-T5-C-1-NW-MAS-X-X WATTAGE 30-30 Watts 60-60 Watts 80-80 Watts 110-110 Watts 125-125 Watts 150-150 Watts COLOR DB - Dark Bronze CC - Custom Color DISTRIBUTION T5 - Type V T4 - Type IV T3 - Type III T2- Type II LENS C - Clear Glass VOLTAGE 1-120v - 277v 2-347v - 480v COLOR TEMPERATURE NW - Neutral CW - Cool WW - Warm MOUNTING METHODS PHOTOCELL OCCUPANCY SENSOR ACCESSORIES MAS - Mounting Arm (Square Pole)* MAR - Mounting Arm (Round Pole)* PM - Pole Mount Arm Adaptor SB - Swivel Bracket SF - Slip FItter Y - Yoke *Designed to mount to a 3 or 4 pole X - None R - Receptacle Only RS - Receptacle Only with Shorting Cap 7P - Seven-pin Twist Lock Photocell Receptacle Only (controls by others) PC1-120v - 277v Twist Lock Photocell* PC2-347v - 480v Twist Lock Photocell* * Includes receptacle X - None OC1 - On/Off OC2 - Dim/High LFS-SAL Wire Guard LFS-SAL Glare Shield If OCC Sensor Option is selected, mounting height specifications need to be clarified: Mounting height between 0-10 OCC Sensor Patterns Mounting height between 10-20 Mounting height over 20 + Options & Accessories LFS-SAL Mounted Arm (Square) LFS-SAL Mounted Arm (Round) LFS-SAL Pole Mount (Arm Adaptor) LFS-SAL Swivel Bracket LFS-SAL Slip Fitter LFS-SAL Yoke Mount LFS-SAL Glare Shield LFS-SAL Wire Guard
Photometric Data For.ies files of this product, please visit the downloads tabs on the LFS-SAL product page: http://lumecon.com/products/lfs-sal-small-area-light/ LFS-SAL-30-T5 LFS-SAL-30-T4 LFS-SAL-30-T3 LFS-SAL-30-T2 LFS-SAL-60-T5 LFS-SAL-60-T4 LFS-SAL-60-T3 LFS-SAL-60-T2 LFS-SAL-80-T5 LFS-SAL-80-T4 LFS-SAL-80-T3 LFS-SAL-80-T2
Photometric Data continued For.ies files of this product, please visit the downloads tabs on the LFS-SAL product page: http://lumecon.com/products/lfs-sal-small-area-light/ LFS-SAL-110-T5 LFS-SAL-110-T4 LFS-SAL-110-T3 LFS-SAL-110-T2 LFS-SAL-125-T3 LFS-SAL-125-T5 LFS-SAL-150-T3 LFS-SAL-150-T5
Photometric Illustration For.ies files of this product, please visit the downloads tabs on the LFS-SAL product page: http://lumecon.com/products/lfs-sal-small-area-light/ LFS-SAL-30-T5 LFS-SAL-30-T2 LFS-SAL-30-T3 LFS-SAL-60-T5 LFS-SAL-60-T3 LFS-SAL-80-T3 LFS-SAL-60-T2 LFS-SAL-80-T5 LFS-SAL-80-T2
Photometric Illustration continued For.ies files of this product, please visit the downloads tabs on the LFS-SAL product page: http://lumecon.com/products/lfs-sal-small-area-light/ LFS-SAL-110-T5 LFS-SAL-110-T3 LFS-SAL-110-T2 LFS-SAL-125-T3 LFS-SAL-125-T5 LFS-SAL-150-T3 LFS-SAL-150-T5
Performance Data ELECTRICAL LOAD DATA AC Current Load (A) Fixture Model Drive Current (ma) System Watts (W) 120V 277V LFS-SAL-30 350 30.9 0.29 0.12 LFS-SAL-60 350 59.77 0.56 0.24 LFS-SAL-80 350 78.49 0.73 0.31 LFS-SAL-110 350 109.69 0.59 0.44 LFS-SAL-125 425 123.5 1.14 0.50 LFS-SAL-150 500 146.7 1.36 0.59 LUMEN MAINTENANCE Data in the table below references projected performance in a 25 C ambient and is based on 10,000 hours of LED testing. Performance data has been tested per IESNA LM-80-08 and projected per IESNA TM-21-11. Use the lumen maintenance factor that corresponds to the desired number of operating hours below to calculate LLF. Lumen Maintenance Factors @ 25 C, by hours: Fixture Model 0 25,000 50,000 70,000 100,000 LFS-SAL-30 1.0 0.99 0.98 0.97 0.96 LFS-SAL-60 1.0 0.99 0.98 0.97 0.96 LFS-SAL-80 1.0 0.99 0.98 0.97 0.96 LFS-SAL-110 1.0 0.97 0.94 0.92 0.88 LFS-SAL-125 1.0 0.97 0.94 0.92 0.88 LFS-SAL-150 1.0 0.97 0.94 0.92 0.88