DocAve 6 Installation

DcAve 6 Installatin User Guide Service Pack 2, Cumulative Update 1 Revisin G Issued April 2013 DcAve 6: Supplementary Tls 1

Table f Cntents Abut the Installatin Guide... 5 Submitting Dcumentatin Feedback t AvePint... 5 Befre Yu Begin... 6 Prts Used by DcAve 6... 6 DcAve Manager System Requirements... 12 System Requirements fr Cntrl Service Installatin... 13 System Requirements fr Media Service Installatin... 17 System Requirements fr Reprt Service Installatin... 18 DcAve Agent System Requirements... 19 System Requirements fr Agent Service Installatin... 19 SQL Server Requirements fr DcAve Databases... 19 SharePint Envirnment Requirements fr DcAve Agents... 19 Overview f DcAve Manager Services and DcAve Agent Service... 21 Cnfiguring a Healthy DcAve Envirnment... 22 Installing DcAve 6... 23 DcAve Manager... 23 Installing DcAve Manager... 23 DcAve Cntrl Service High Availability... 31 DcAve Agent... 32 Installing DcAve Agents... 32 Skipping Envirnment Scanning... 35 Skipping Envirnment Scanning fr DcAve Manager... 36 Skipping Envirnment Scanning fr DcAve Agent... 36 Unattended Installatin DcAve Manager... 37 Generating the Installatin Answer File fr DcAve Manager... 37 Perfrm the DcAve Manager Unattended Installatin... 42 Cmmands and Cmmand Parameters fr DcAve Manager Unattended Installatin... 43 Unattended Installatin DcAve Agent... 57 Generating the Installatin Answer File fr DcAve Agent... 57 2

Perfrm the DcAve Agent Unattended Installatin... 59 Cmmands and Cmmand Parameters fr DcAve Agent Unattended Installatin... 60 Helpful Ntes fr DcAve Unattended Installatin t Windws XP Operating System... 71 Accessing the DcAve GUI... 72 Internet Explrer Setup... 72 Lgging In t DcAve... 74 Out-f-Brwser Accessing DcAve Manager... 75 DcAve Manager and Agent Maintenance... 77 Using the DcAve Manager/Agent Cnfiguratin Tl... 77 Using the DcAve Manager/Agent Restart Service Tl... 77 Using the DcAve Manager/Agent Uninstallatin Wizard... 77 Change the Manager Installatin... 78 Repair the Manager/Agent Installatin... 78 Uninstalling DcAve... 79 Uninstalling DcAve Manager... 79 Uninstalling DcAve Manager frm Cmmn Envirnments... 79 Uninstalling DcAve Manager frm Windws Server 2008 R2 Server Cre r Windws Server 2012 Server Cre... 80 Uninstalling DcAve Agent... 81 Uninstalling DcAve Agent frm Cmmn Envirnments... 81 Uninstalling DcAve Agent frm Windws Server 2008 R2 Server Cre r Windws Server 2012 Server Cre... 82 Advanced Cnfiguratin... 83 Mdify the Prt Used by DcAve Strage Manager and Cnnectr... 83 Mdify the Prt Used by DcAve Replicatr... 83 Helpful Ntes... 85 Issue Displaying Installed DcAve Agents in the Manager Interface... 85 Database Cllatin Issue... 86 Other Issues... 87 Appendix A Where t Install DcAve Agent... 88 Appendix B Accessing Ht Key Mde... 93 DcAve Hme Page... 93 3

Appendix C Migratin Surce Envirnment... 95 Appendix D Permissin Requirements fr DcAve Mdules... 97 Migratr... 97 File System Migratr... 97 SharePint Migratr... 98 Ltus Ntes Migratr... 100 erm Migratr... 101 Livelink Migratr... 101 Exchange Public Flder Migratr... 102 Lcal System Permissins... 103 Data Prtectin... 103 Granular Backup and Restre... 103 Platfrm Backup and Restre... 105 Administratin... 107 Administratr... 107 Cntent Manager... 108 Deplyment Manager... 110 Replicatr... 112 Cmpliance... 113 ediscvery... 113 Vault... 114 Reprt Center... 116 Lcal System Permissins... 117 Strage Optimizatin... 118 Strage Manager... 118 Cnnectr... 119 Archiver... 121 Index... 124 Ntices and Cpyright Infrmatin... 125 4

Abut the Installatin Guide The will prvide yu the fllwing infrmatin: Order f installatin System Requirements (Minimum standards t prceed with the installatin.) System Recmmendatins (Recmmended standards fr imprved perfrmance.) Submitting Dcumentatin Feedback t AvePint AvePint encurages custmers t prvide feedback regarding ur prduct dcumentatin. Click the fllwing URL t access the Submit Yur Feedback frm n ur Web site: http://www.avepint.cm/resurces/dcumentatin-feedback/?flush=1 5

Befre Yu Begin *Nte: On a server running Windws Server 2003 r Windws Server 2003 R2, befre yu install DcAve Manager using the Built-in database, Windws Installer 4.5 must be installed first. Refer t the link belw t dwnlad and install Windws Installer 4.5 prir t installing DcAve 6 Manager: http://www.micrsft.cm/dwnlad/en/details.aspx?id=8483 *Nte: The 32-bit perating systems are nt supprted t use the built-in database when installing DcAve. *Nte: If yu want t use the DcAve functins in SharePint Online 2013, yu must install.net Framewrk 4.5 r the later versins n at least ne f the Agent servers in the Agent Grup used t perfrm the crrespnding jb. Prts Used by DcAve 6 Refer t the table belw fr the prts that are used by DcAve 6. Prt Usage Must be Enabled On 14000 Web Site Prt Used t access DcAve Cntrl Service. DcAve Cntrl Server Cntrl Service Prt Used fr cmmunicating with ther DcAve services. 14001 Media Service Prt Used fr cmmunicating with ther DcAve DcAve Media Server services. 14002 Media Service Data Prt Used fr transmitting data between DcAve Media Server DcAve and the strage device. 14003 Reprt Service Prt Used fr cmmunicating with ther DcAve DcAve Reprt Server services. 14004 DcAve Agent Prt Used fr cmmunicating with ther DcAve DcAve Agent Server services. 14005 Prt used by DcAve Strage Manager and Cnnectr prcesses t N/A transmit the data required by the enabled EBS/RBS prvider. 14006 Prt used by DcAve Real-time Replicatr t infrm Replicatr N/A prcesses f the real-time actins captured in SharePint. 14007 The prxy prt t use when updating DcAve Cntrl Service by applying DcAve 6 updates in Update Manager. DcAve Cntrl Server Refer t the table belw fr the prts that are used by each f the DcAve 6 prducts. Prduct Cntrl Service Installatin 6 Used Prts Related Prcesses Usage Basic Functins Invlved 14000 CntrlTimerService.exe Cmmunicate with ther Install Cntrl services. Service.

Prduct Media Service Installatin Reprt Service Installatin Agent Service Installatin Cntrl Panel Used Prts 14001 and 14002 14003 ReprtService.exe Cmmunicate with ther services. Related Prcesses Usage Basic Functins Invlved MediaService.exe Cmmunicate with Install Media Service Cntrl Service and used and register it t the fr data transferring. Cntrl Service. 14004 AgentService.exe Cmmunicate with Cntrl Service. 14007 CmmnPatchInstaller.exe PatchCntrlCli.exe prce ss uses this prt t cmmunicate with the CmmnPatchInstaller.exe prcesses f ther services. Install Reprt Service and register it t the Cntrl Service. Install agent and register it t the Cntrl Service. Update all the Manager/Agent services. Prduct Used Prts Usage Basic Functins Invlved SharePint 2007 t 2010 Migratin 14000 Cmmunicate between Cntrl Service, Agent Service and Media Service. 14001(Only fr Offline Migratin) 14002(Only fr Offline Migratin) Cmmunicate between Cntrl Service, Agent Service and Media Service. Cmmunicate between Cntrl Service, Agent Service and Media Service. 14004 Cmmunicate between Cntrl Service, Agent Service and Media Service. Online migratin at site cllectin level; Offline migratin at site level. Offline migrate site cllectin level. Offline migratin at site cllectin level. Online migratin at site cllectin level; Offline migratin at site level. Prduct Used Prts Related Prcesses Reprt Center 14000 (Cntrl Service) 14001 (Media Service) CntrlTimer Service.exe MediaService.exe Usage Cmmunicate between Cntrl Service, Agent Service and Media Service. Cmmunicate between Cntrl Service, Agent Service and Media Service. Basic Functins Invlved N/A Disk Space Mnitring 7

Prduct Used Prts Related Prcesses 14004 (Agent Service) 14003 (Reprt Service) SP2010Repr tcenter.exe SP2010RCAu ditr.exe ReprtServic e.exe Usage Cmmunicate between Cntrl Service, Agent Service and Reprt Service. Cmmunicate between Cntrl Service, Agent Service and Reprt Service. Basic Functins Invlved Cllect data; Run reprt; Shw reprt; Apply Auditr rules; Retrieve Auditr data. Prduct Used Prts Usage Basic Functins Invlved Cnnectr 14000 Cmmunicate between Cntrl Service and Agent Service. 14004 Cmmunicate between Cntrl Service and Agent Service. 14005 It is an internal prt f the Cnnectr prcess. Cnnectr wrks well even if we dn't create any Inbund Rule fr this prt. Synchrnizatin; Scheduled Synchrnizatin; Mapping; Access Cnnectr stubs. Synchrnizatin; Scheduled Synchrnizatin; Mapping; Access Cnnectr stubs. Synchrnizatin; Scheduled Synchrnizatin; Mapping; Access Cnnectr stubs. Prduct Granular Backup and Restre Used Related Prts Prcesses 14000 CntrlTimerServ ice.exe Usage Cmmunicate between Cntrl Service, Agent Service and Media Service. 14001 MediaService.exe Cmmunicate between Cntrl Service, Agent Service and Media Service. 14004 SP2010GranularB ackup.exe SP2010GranularR estre.exe Cmmunicate between Cntrl Service, Agent Service and Media Service. Basic Functins Invlved N/A Granular backup; Granular restre. Granular backup; Granular restre. Prduct Deplyment Manager 8 Used Usage Prts 14000 Cmmunicate between Cntrl Service and Agent Service. Basic Functins Invlved Online Deplyment Manager jbs; Offline Deplyment Manager jbs.

Prduct Used Usage Prts 14001 Cmmunicate between Cntrl Service, Agent Service and Media Service. 14002 Transfer data between Media Service and Agent Service. 14004 Cmmunicate between Cntrl Service and Agent Service. Basic Functins Invlved Deplyment Manager jbs that checked the Backup the destinatin envirnment checkbx; Slutin Stre. Deplyment Manager jbs that checked the Backup the destinatin envirnment checkbx; Slutin Stre. Online Deplyment Manager jbs; Offline Deplyment Manager jbs. Prduct Used Prts Usage Basic Functins Invlved Cntent Manager 14000 Cmmunicate with the Cntrl Service. Create a Cntent Manager plan and run it. 14001/14002 Cmmunicate with the Media Service. Run a Cntent Manager jb with the Backup the destinatin envirnment ptin selected and then rll back 14004 Cmmunicate with the Agent Service. the surce and destinatin. Run a Cntent Manager jb. Prduct Used Prts Replicatr 14000 (Cntrl Service) 14004 (Agent Service) 14002 (Media Service) Related Prcesses Usage Basic Functins Invlved CntrlTimerService.exe Cmmunicate between Cntrl Service and Agent Service. SP2010ReplicatrOffline.exe SP2010ReplicatrPrimary.exe SP2011ReplicatrSecndary.exe SP2012ReplicatrListener.exe SP2010GranularBackup.exe MediaService.exe Cmmunicate between Cntrl Service, Agent Service and Media Service. Online Replicatr jb; Offline Replicatr jb; One Way Pull; Real-time Replicatr jb. Run a Replicatr jb with the Backup Befre Replicatin ptin enabled. Prduct Used Prts Usage Archiver 14000 Cmmunicate between Cntrl Service, Agent 14001 Service and Media Service. 14002 14004 Basic Functins Invlved Archiver jb; Archiver Restre jb. 9

Prduct Used Prts Usage Basic Functins Invlved Exchange Public Flder Migratin 14000 and 14004 Cmmunicate between Manager and Agent. Migrate surce data t SharePint using nline migratin. erm Migratin 14000 and 14004 Migrate surce data t SharePint using nline migratin; Migrate surce data t SharePint using Livelink Migratin File System Migratin Ltus Ntes Migratin 14000 and 14004 14000 and 14004 14000 and 14004 ffline migratin. Migrate surce data t SharePint using nline migratin; Migrate surce data t SharePint using ffline migratin. Migrate surce data t SharePint using nline migratin. Migrate surce data t SharePint using nline migratin; Migrate surce data t SharePint using ffline migratin. Prduct Strage Manager Used Usage Prts 14000 Cmmunicate between Cntrl Service and Agent Service. 14004 Cmmunicate between Cntrl Service and Agent Service. Basic Functins Invlved Apply Real-time Strage Manager rules; Apply Scheduled Strage Manager rules; Access Strage Manager stubs; Cnvert stubs t cntent; Clean up rphan BLOBs. Apply Real-time Strage Manager rules; Apply Scheduled Strage Manager rules; Access Strage Manager stubs; Cnvert stubs t cntent; Clean up rphan BLOBs. Prduct Used Prts Usage Administratr 14000 Cmmunicate between Cntrl Service and Agent Service. 14004 Cmmunicate between Cntrl Service and Agent Service. Basic Functins Invlved Grant permissin; Create site cllectins. Clne user permissin; Dead accunt cleaner. Except fr the tw lcal prts 14005 and 14006, all f the ther prts must be able t be accessed thrugh the firewall sftware installed n the crrespnding machines. 10

*Nte: If there are multiple DcAve services installed n the same server, make sure all f the required prts are enabled n that server. Fr example, if the Windws Firewall is enabled n the servers which have installed DcAve, yu must make sure the 14000, 14001, 14002, 14003 and 14004 prts are allwed in the Inbund Rules n the crrespnding servers. *Nte: The prt numbers may vary accrding t the settings cnfigured when installing DcAve 6 in yur envirnments. In this example, the default prts are used. Remte t the server where the DcAve 6 Timer Service is installed. 1. Navigate t Start > Administrative Tls > Windws Firewall with Advanced Security. 2. Right click Inbund Rules under Windws Firewall with Advanced Security n Lcal Cmputer and click New Rule. 3. In Rule Type step, select Prt t cnfigure the inbund rule fr the prts used by DcAve 6 Timer Service. 4. Click Next. 5. In Prtcl and Prts step, specify the rule t be applied t TCP, and then select Specific lcal prts ptin. Enter 14000 in the textbx. 6. Click Next. 7. In Actin step, select the Allw the cnnectin ptin t allw the cnnectin t the prt 14000. 8. Click Next. 9. In Prfile step, keep the default selectin, which is selecting all the three ptins. 10. Click Next. 11. In Name step, enter the Name and an ptinal Descriptin fr this inbund rule. 12. Click Finish t finish creating the inbund rule. 13. Repeat the same steps n all the ther servers which have DcAve installed and have enabled the Windws Firewall. 11

DcAve Manager System Requirements DcAve Manager cnsists f three services, Cntrl Service, Media Service and Reprt Service. Cntrl Service Manage all DcAve peratins and allws users t interact with the web-based DcAve platfrm. All agents can cmmunicate with the manager thrugh the Cntrl Service, s it is imperative that the machine yu install the cntrl service n is accessible by all agent machines. This service can be run n a server cluster t ensure high availability; if the cntrl service were t g dwn, a standby service in the cluster wuld be enabled by an administratr. Fr mre infrmatin, refer t the DcAve Cntrl Service High Availability sectin f this guide. Media Service Perfrms assistant jbs such as managing the retentin rules and managing the backup jb data. This service can be installed n multiple machines. Using multiple media services allws fr high availability and lad-balanced access t the data strage lcatins. Reprt Service Manages all SharePint data cllectin and management, mnitr SharePint activities and return the data t the Cntrl Service fr prcessing. This must be cnfigured with the assciated SQL databases and SQL Reprt Services. This service is critical fr using the DcAve Reprt Center mdule. *Nte: DcAve Reprt service can be installed n multiple servers and can be lad balanced. Hwever, all the Reprt services must share the same Reprt Database and Auditr Database. They can either be run n the same server as yur DcAve Agent, r split acrss several servers. Fr mre infrmatin n DcAve Manager services, see the Installing DcAve Manager sectin f this guide. While it is pssible t have the DcAve Manager and DcAve Agent n a single server, it is nt recmmended. Fr the best perfrmance, install the Manager s services acrss multiple servers, and install nly the necessary Agents n the Agent servers. Refer t these tables fr the system requirements f each DcAve Manager Service: System Requirements fr Cntrl Service Installatin System Requirements fr Media Service Installatin System Requirements fr Reprt Service Installatin *Nte: If all Manager services are installed n the same server, all the system requirements mentined in the System Requirements fr Cntrl Service Installatin sectin must be met. Mrever, the server that DcAve Manager services are installed n must meet the fllwing requirements: The required physical memry is 1.5GB. The recmmended physical memry is 2GB. 12

The available disk space must be at least 1GB. System Requirements fr Cntrl Service Installatin Operating System Editin: Windws Server 2008, Windws Server 2008 R2, Windws Server 2008 R2 Server Cre, Windws Vista, Windws 7, Windws 8, Windws Server 2012 Rules Ttal Physical Memry Available Disk Space.Net Framewrk Versin.Net Framewrk Features Net.Tcp Prt Sharing Service Windws Prcess Activatin Service Requirements Required: 512MB r abve Recmmended: 2GB Required: 1GB r abve.net Framewrk 3.5 SP1 r abve (.NET Framewrk 3.5.1 must be installed) Fr Windws Server 2008 SP2 and Windws Server 2008 R2 SP1: The Windws features, including WCF Activatin, HTTP Activatin and Nn-HTTP Activatin must be installed. Fr Windws Server 2012: The Windws features, including.net Framewrk 3.5.1, HTTP Activatin, Nn-HTTP Activatin, WCF Services, and TCP Prt Sharing must be installed. Net.Tcp Prt Sharing Service is started Windws Prcess Activatin Service is started Prcess Mdel,.NET Envirnment and Cnfiguratin APIs are installed Wrld Wide Web Publishing Service Wrld Wide Web Publishing Service is started 13

Rules Web Server(IIS) Rle Requirements Windws features installed: Web Server Cmmn HTTP Features (Static Cntent, Default Dcument) Fr Windws Server 2008 SP2 and Windws Server 2008 R2 SP1: Applicatin Develpment (ASP.NET,.NET Extensibility, ISAPI Extensins and ISAPI Filters) Fr Windws Server 2012: Applicatin Develpment (ASP.NET 3.5,.NET Extensibility 3.5, ISAPI Extensins and ISAPI Filters) Management Tls (IIS Management Cnsle, IIS 6 Management Cmpatibility and IIS 6 Metabase Cmpatibility) Operating System Editin: Windws Server 2003, Windws Server 2003 R2, Windws XP IIS Service PwerShell Versin Ttal Physical Memry Available Disk Space.Net Framewrk Versin Net.Tcp Prt Sharing Service Wrld Wide Web Publishing Service ASP.NET *Nte: IIS Management Cnsle is nt required t Windws Server 2008 R2 Server Cre envirnment. IIS Admin Service is started IIS versin must be 6 r abve PwerShell 2.0 r abve Required: 512MB r abve Recmmended: 2GB Required: 1GB r abve.net Framewrk 3.5 SP1 r abve (.NET Framewrk 3.5.1 must be installed) Net.Tcp Prt Sharing Service is started Wrld Wide Web Publishing Service is started ASP.Net 2.0.50727 r abve 14

Rules Requirements Applicatin Server Netwrk COM+ access is enabled. Internet Infrmatin Services (IIS) is started, including the fllwing installed features: Cmmn Files IIS Manager Wrld Wide Web Service IIS Service HTTP SSL PwerShell Versin IIS Admin Service is started IIS versin must be 6 r abve HTTP SSL Service is started PwerShell 2.0 r abve Required Applicatin Pl Settings The fllwing applicatin pl settings are required by DcAve Cntrl Service Installatin regardless if yu chse t use an existing applicatin pl r create a new ne. IIS7 If yu chse t create a new applicatin pl, DcAve will autmatically cnfigure these settings. If yu chse t use an existing applicatin pl, yu must cnfigure the applicatin pl as fllws: IIS Versin IIS Setting Value Nte Advanced Settings > v2.0 / v4.0 N Managed Cde is nt supprted. General >.NET Framewrk Versin Advanced Settings > False False is required since DcAve must General > Enable 32-bit lad sme third-party dlls which are Applicatins 64-bit nes. Advanced Settings > General > Managed Pipeline Mde Integrated / Classic It is nt supprted t use Classic tgether with.net Framewrk v4.0. Prcess Mdel > Lad User Prfile Advanced Settings > General > Start Autmatically True True / False True is required by DcAve SSO, and False is nt supprted. True is strngly recmmended because if yu set the value t False, the applicatin pl requires manual starting up. 15

Required Applicatin Pl Accunt Permissins The applicatin pl accunt fr cnnecting an existing IIS web site r creating a new IIS web site must have the fllwing Lcal System Permissins. The specified applicatin pl accunt will be granted full cntrl permissin t the fllwing grups and flders autmatically during DcAve Manager installatin. Member f the fllwing lcal grup: IIS_WPG (fr IIS 6) r IIS_IUSRS (fr IIS 7 and IIS 8) Full Cntrl t HKEY_LOCAL_MACHINE\SOFTWARE\AvePint\DcAve6 Full Cntrl t DcAve Manager flder Member f the Perfrmance Mnitr Users grup Full Cntrl t DcAve Certificate private keys Full Cntrl (r Read, Write, Mdify and Delete) t C:\WINDOWS\Temp (nly fr Windws 2003 envirnment) Yu can add the applicatin pl accunt t the lcal Administratrs grup t meet the required permissins. 16

System Requirements fr Media Service Installatin Operating System Editin: Windws Server 2003, Windws Server 2003 R2, Windws Server 2008, Windws Server 2008 R2, Windws Server 2008 R2 Server Cre, Windws XP, Windws Vista, Windws 7, Windws 8, Windws Server 2012 Rules Ttal Physical Memry Available Disk Space.NET Framewrk Versin.Net Framewrk 3.5 Features (nly in Windws Server 2008, Windws Server 2008 R2, Windws 7 and Windws Server 2012 envirnments) Net.Tcp Prt Sharing Service PwerShell Versin Requirements Required: 512MB r abve Recmmended: 2GB Required: 1GB r abve.net Framewrk 3.5 SP1 r abve (.NET Framewrk 3.5.1 must be installed) Fr Windws Server 2008 SP2 and Windws Server 2008 R2 SP1: The Windws features, including WCF Activatin, HTTP Activatin and Nn-HTTP Activatin are installed. Fr Windws Server 2012: The Windws features, including.net Framewrk 3.5.1, HTTP Activatin, Nn-HTTP Activatin, WCF Services, and TCP Prt Sharing must be installed. Net.Tcp Prt Sharing Service is started PwerShell 2.0 r abve 17

System Requirements fr Reprt Service Installatin Operating System Editin: Windws Server 2003, Windws Server 2003 R2, Windws Server 2008, Windws Server 2008 R2, Windws Server 2008 R2 Server Cre, Windws XP, Windws Vista, Windws 7, Windws 8, Windws Server 2012 Rules Ttal Physical Memry Available Disk Space.NET Framewrk Versin.Net Framewrk 3.5 Features (nly in Windws Server 2008, Windws Server 2008 R2, Windws 7 and Windws Server 2012 envirnments) Net.Tcp Prt Sharing Service PwerShell Versin Requirements Required: 512MB r abve Recmmended: 2GB Required: 1GB r abve.net Framewrk 3.5 SP1 r abve (.NET Framewrk 3.5.1 must be installed) Fr Windws Server 2008 SP2 and Windws Server 2008 R2 SP1: The Windws features, including WCF Activatin, HTTP Activatin and Nn-HTTP Activatin are installed. Fr Windws Server 2012: The Windws features, including.net Framewrk 3.5.1, HTTP Activatin, Nn-HTTP Activatin, WCF Services, and TCP Prt Sharing must be installed. Net.Tcp Prt Sharing Service is started PwerShell 2.0 r abve 18

DcAve Agent System Requirements DcAve Agent has ne service, DcAve Agent Service. A DcAve agent cmmunicates with SharePint based n the cmmands it receives frm the DcAve Manager s Cntrl Service. Multiple agent setups prvide redundancy as well as scalability fr large envirnments by allwing yu t specify different accunts fr different farms where multiple farms exist. The DcAve Agent can be installed n different machines accrding t the rle f the machine, and the DcAve mdules and functinalities yu wish t use. Fr mre infrmatin n where t install the DcAve Agents, refer t the Appendix A. System Requirements fr Agent Service Installatin Operating System Editin: Windws Server 2003, Windws Server 2003 R2, Windws Server 2008, Windws Server 2008 R2, Windws Server 2008 R2 Server Cre, Windws XP, Windws Vista, Windws 7, Windws 8, Windws Server 2012 Rules Ttal Physical Memry Available Disk Space.NET Framewrk Versin.Net Framewrk 3.5 Features (nly in Windws Server 2008, Windws Server 2008 R2, Windws 7, Windws Server 2012 envirnments) Net.Tcp Prt Sharing Service PwerShell Versin Requirements Required: 512MB r abve Recmmended: 2GB Required: 1GB r abve.net Framewrk 3.5 SP1 r abve Fr Windws Server 2008 SP2 and Windws Server 2008 R2 SP1: Windws.NET Framewrk 3.5.1 must be installed. Fr Windws Server 2012: The Windws features, including WCF Services and TCP Prt Sharing must be installed. Net.Tcp Prt Sharing Service is started PwerShell 2.0 r abve SQL Server Requirements fr DcAve Databases Databases Cntrl Database Reprt Database Auditr Database Replicatr Database Stub Database Migratr Database SQL Server Editin Fr DcAve 6 SP1 and the later versins: Micrsft SQL Server 2005 Micrsft SQL Server 2008 Micrsft SQL Server 2008 R2 Micrsft SQL Server 2012 SharePint Envirnment Requirements fr DcAve Agents DcAve 6 Agents can be installed and used in the fllwing SharePint 2010 envirnments: Micrsft SharePint Server 2010 RTM Micrsft SharePint Fundatin 2010 RTM Micrsft SharePint Server 2010 with SP1 19

Micrsft SharePint Fundatin 2010 with SP1 Micrsft SharePint Server 2013 Micrsft SharePint Fundatin 2013 *Nte: The all in ne installatin f SharePint uses the cmplete installatin ptin which installs everything including the SQL Server n a single machine. If yu are using the SharePint Stand-alne installatin that uses the built-in SQL Server 2008 Express database, the web applicatin that uses the pre-defined Netwrk Service accunt as the applicatin pl security accunt is nt supprted by DcAve 6 since lcal users may be used t manage certain SharePint cmpnents. 20

Overview f DcAve Manager Services and DcAve Agent Service After installing all f the services including DcAve Manager Services and DcAve Agent Service prperly, yu are able t manage yur SharePint data via the DcAve platfrm. Cntrl Service receives the request frm DcAve Manager GUI, and then sends the request t Agent Services which retrieve data frm SharePint. Agent Services transfer the SharePint data t Media Services where the data will be integrated t the frmat nly can be identified by DcAve, and sends the integrated data t the specified destinatin. Agent Services als retrieves data via Media Service when transferring r restring data t SharePint. The Reprt Service recrds all f these actins. The infrmatin is then used by DcAve when generating reprts. DcAve Cntrl Service and DcAve Agent Service are required t all the DcAve prducts. DcAve Media Service is required t the fllwing DcAve prducts: Granular Backup and Restre Platfrm Backup and Restre Archiver Deplyment Manager Replicatr Cntent Manager ediscvery SharePint 2007 t 2010 Migratin DcAve Reprt Service is nly required t DcAve Reprt Center prduct. Yu d nt have t install DcAve Reprt Service if yu are nt using DcAve Reprt Center. 21

Cnfiguring a Healthy DcAve Envirnment The fllwing table lists the criteria fr what cnstitutes a healthy DcAve envirnment: Requirement Reasn Mandatry? Manager installed Fundamental t upgrade cnfiguratins Yes Agents installed n each Fundamental fr all farms t be upgraded Yes DcAve 6 SP1 Agent hst Media service installed n Fundamental fr all farms t be upgraded Yes each DcAve 6 SP1 media server Manager sees Agents in Test f cmmunicatin between Manager / Agents Yes Agent Mnitr Manager sees Media Services Test f cmmunicatin between Manager / Media Yes in Manager Mnitr Tree lads in all installed Test f cmmunicatin and access rights between Yes prducts DcAve Agent accunt prvided and SharePint Backup run against sample Test the cnfiguratin f VSS in the envirnment Preferred Web applicatin EBS r RBS is installed n Verify EBS r RBS runtime is installed n each Preferred each Agent Agent RBS tested against sample cntent DB Test f cmmunicatin between Agents and the SharePint envirnment Preferred 22

Installing DcAve 6 The DcAve Installatin Wizard is there t guide yu thrugh the installatin prcess. By fllwing the steps belw, yu will have DcAve up-and-running n yur envirnment very quickly. In rder t cmplete the installatin successfully, a lcal administratr must be used t run the Installatin Wizard. Install DcAve in the fllwing rder: 2. Install the DcAve Manager with the Manager Installatin Wizard. 3. Install the DcAve Agents with the Agent Installatin Wizard 4. Lg in t DcAve t make sure the Manager and Agent are able t cmmunicate with each ther prperly. DcAve Manager Make sure the system requirements are met befre starting installatin fr DcAve Manager. Fr mre infrmatin, refer t the System Requirements fr Cntrl Service Installatin, System Requirements fr Media Service Installatin and System Requirements fr Reprt Service Installatin sectins f this guide. *Nte: When running the Manager Installatin Wizard n the server running Windws Server 2003/Windws Server 2003 R2, make sure the Windws cmpnents are nt being added r remved during the rule scanning, therwise, the scanning result will be affected. *Nte: When running the Manager Installatin Wizard n a server running Windws Server 2008/Windws Server 2008 R2/Windws 7/Windws Server 2012, make sure the Server Manager is nt being used t add r remve Windws features during the rule scanning, therwise, the scanning result will be affected. Installing DcAve Manager Installing DcAve Manager n Cmmn Envirnments DcAve Manager can be installed n the fllwing envirnments. Windws Server 2003 Windws Server 2003 R2 Windws Server 2008 Windws Server 2008 R2 Windws XP Windws Vista 23

Windws 7 Windws 8 Windws Server 2012 Fllw the steps belw t install DcAve Manager. 1. Dwnlad the Manager ZIP file, either by requesting a dem versin frm: http://www.avepint.cm/dwnlad/, r by cntacting an AvePint representative fr links t this package. 2. Unzip this package. Open this unpacked DcAve Manager directry. Duble click the Setup.exe file. 3. After the welcme screen appears, click Next. 4. Enter yur name and the rganizatin int the prvided field. Click Next. 5. Carefully review the DcAve License Agreement. After yu have read the agreement, check the I accept the terms in the license agreement checkbx, and click Next. 6. Click the Brwse buttn. Select the lcatin fr the Manager installatin. By default, the installatin lcatin is C:\Prgram Files\AvePint. Click Next. 7. Select the DcAve Manager services yu want t install. There are tw installatin methds yu can select, Cmplete r Advanced. Cmplete All f the services will be installed nt ne machine. Advanced Only the selected service will be installed. Select the service(s) yu want t install by checking the crrespnding checkbx. There are three services yu can install. Cntrl Service Manage all DcAve peratins and achieve the web-based DcAve platfrm, allwing users t interact with the sftware. All agents can cmmunicate with the manager by Cntrl Service, s it is imperative that the machine yu install the cntrl service n is accessible by all agent machines. This service can be run n a server cluster t ensure high availability; if the cntrl service were t g dwn, a standby service in the cluster wuld be enabled by an administratr. Fr mre infrmatin, refer t the DcAve Cntrl Service High Availability sectin f this guide. Media Service Perfrms assistant jbs such as managing the retentin rules and managing the backup jb data. This service can be installed n multiple machines. Using multiple media services allws fr high availability and ladbalanced access t the data strage lcatins. Reprt Service Manages all SharePint data cllectin and management, mnitr SharePint activities and return the data t the Cntrl Service fr prcessing. This must be cnfigured with the assciated SQL databases and SQL Reprt Services. This service is critical fr using the DcAve Reprt Center mdule. 24

*Nte: DcAve Reprt service can be installed n multiple servers and can be lad balanced. Hwever, all the Reprt services must share the same Reprt Database and Auditr Database. Click Next. 8. DcAve will perfrm a brief pre-scan f the envirnment t ensure that all rules meet the requirements. The status fr each rule will be listed in the Status clumn. Click the hyperlink f the status, the detailed infrmatin abut the scan result will be listed in the ppup windw. Yu may click Details t can view the detailed infrmatin f all the requirements. If any rules have failed the pre-scan, update yur envirnment t meet the requirements, then click the Rescan buttn t check yur envirnment again. Once all rules pass, click Next. 9. Set up the Cntrl Service Cnfiguratin: Cntrl Service Hst Specify the current machine s hstname r IP address. The Cntrl Service manages internal cnfiguratin data, user access cntrl, scheduling, and jb mnitring. IIS Web Site Settings Cnfigure the IIS web site settings fr the Cntrl Service. Yu can select t use an existing IIS web site r create a new IIS web site. The IIS web site is used t access DcAve Manager. Use an existing IIS web site Select an existing IIS web site frm the drp-dwn list, and if necessary, yu can adjust the Web Site Prt used t access the DcAve Cntrl Service. Create a new IIS web site Enter the web site name and create a new IIS web site fr the Cntrl Service. The default Web Site Prt used t access DcAve Cntrl Service is 14000, yu d nt need t change it unless a knwn prt cnflict exists. Web Site Prt Cntrl Service cmmunicatin prt. The default prt is 14000. Applicatin Pl Settings Cnfigure the IIS applicatin pl settings fr the crrespnding web site. Yu can select t use an existing applicatin pl r create a new applicatin pl. The applicatin pl is used t handle the requests sent t the crrespnding web site. The fllwing settings can be cnfigured: Use an existing applicatin pl (nt recmmended) Select an existing applicatin pl frm the drp-dwn list. If yu chse t use an existing applicatin pl, the Applicatin Pl Accunt settings are greyed ut and cannt be changed. Create a new applicatin pl Enter the applicatin pl name and applicatin pl accunt settings t create a new IIS applicatin pl fr the crrespnding web site. 25

Click Next t cntinue t cnfigure the database settings fr Cntrl Service. 10. Select MS SQL r Built-in Database frm the Database Type drp-dwn menu t cnfigure the database. Fr the MS SQL database, the fllwing infrmatin must be cnfigured: Database Server The MS SQL server name. Cntrl Service Database Name Enter a database name fr the Cntrl Service, if the database des nt exist, it will be created in the prvided MS SQL server. Database Credentials Select the credential fr this cntrl service database. Windws Authenticatin (the default ptin) Use this methd when yu want the user identity t be cnfirmed by Windws. The specified accunt must have permissin t access the SQL Server machine where yu want t create the cntrl service database. The user specified here must als have the fllwing permissin t the machine where the DcAve Manager will be installed: Lg n as a batch jb (fund in Cntrl Panel > Administrative Tls > Lcal Security Plicy > Security Settings > Lcal Plicies > User Rights Assignment). SQL Authenticatin SQL server will cnfirm the user identity itself accrding t the specified accunt and passwrd. The specified accunt must have the fllwing permissin: DB Owner f the existing DcAve 6 cntrl database r DB Creatr f the newly created DcAve 6 cntrl database. Passphrase Settings Enter the passphrase fr the specified Cntrl database. If yu chse t create a new Cntrl database, enter the passphrase yu want t use fr prtecting DcAve Manager data. If yu chse t use an existing Cntrl database, enter the crrespnding passphrase fr this Cntrl database. *Nte: If the cnfiguratin file hasn t been remved when uninstalling DcAve Manager, yu will nt be required t enter the passphrase fr using this existing Cntrl database. Advanced Database Settings Yu can chse t assciate the DcAve Cntrl database with a specific failver SQL server that is used in cnjunctin with SQL Server database mirrring. Fr Built-in Database, enter the passphrase yu want t use fr prtecting DcAve Manager data in the Passphrase Settings textbx. Click Next. *Nte: The built-in database nly supprts the all-in-ne installatin. After the Manager installatin cmpletes, it cannt be changed using the Change functin. 26

11. Set up the Media Service Cnfiguratin fr data management. Media Service Hst Specify the current machine s hstname r IP address. The Media Service manages backup jb data (fr example, jb metadata and backup index frm Data Prtectin). Media Service Prt Used fr cmmunicating with the ther DcAve services. The default prt is 14001. Media Service Data Prt Transmit the data between DcAve and the strage device. The default prt is 14002. Cntrl Service Hst (This field will be hidden when yu chse t install the Cntrl Service in Services Installatin step) The hstname r IP address f the machine where Cntrl service is installed. Cntrl Service Prt (This field will be hidden when yu chse t install the Cntrl Service in Services Installatin step) The prt number fr the Cntrl Service entered abve. *Nte: The Cntrl Service Hst and Cntrl Service Prt must be cnsistent acrss all DcAve Manager Services in rder t prperly functin. Click Next. 12. Set up the Reprt Service Cnfiguratin. Reprt Service Hst The hstname r IP address f the machine where Reprt Service is installed. Reprt Service Prt The prt number fr Reprt Service. The default prt is 14003. Cntrl Service Hst (This field will be hidden when yu chse t install the Cntrl Service in Services Installatin step) The hstname r IP address f the machine where Cntrl service is installed. Cntrl Service Prt (This field will be hidden when yu chse t install the Cntrl Service in Services Installatin step) The prt number fr the Cntrl Service entered abve. *Nte: The Cntrl Service Hst and Cntrl Service Prt must be cnsistent acrss all DcAve manager services in rder t prperly functin. Click Next t cntinue t cnfigure the database settings fr Reprt Service. 13. Fr the reprt service database, yu can select t use the previus database settings r cnfigure it yurself: Use the previus database settings If yu select this ptin under Reprt Service Cnfiguratin, the previus database settings fr Cntrl database will be used fr the reprt database. T set a database fr reprt service nly, the fllwing infrmatin must be cnfigured. 27

Select the database type frm the drp-dwn list, nw nly MS SQL can be selected. Database Server The MS SQL server name. Reprt Service Database Name Enter a database name fr the Reprt Service, if the database des nt exist, it will be created in the prvided MS SQL server. Database Credentials Select the credential fr this reprt service database. Windws Authenticatin (the default ptin) Use this methd when yu want the user identity t be cnfirmed by Windws. The specified accunt must have the permissin f accessing the SQL Server machine where yu want t create the reprt service database. The user specified here must als have the fllwing permissin t the machine where the DcAve Manager will be installed: Lg n as a batch jb (fund in Cntrl Panel > Administrative Tls > Lcal Security Plicy > Security Settings > Lcal Plicies > User Rights Assignment). SQL Authenticatin SQL server will cnfirm the user identity itself accrding t the specified accunt and passwrd. The specified accunt must have the fllwing permissin: DB Owner f the existing DcAve 6 reprt service database r DB Creatr f the newly created DcAve 6 reprt service database. Advanced Database Settings Yu can chse t assciate the DcAve Reprt database with a specific failver SQL server that is used in cnjunctin with SQL Server database mirrring. Click Next t cntinue t cnfigure the Auditr database settings fr Reprt Service. 14. Fr the Auditr database, yu can select t use the previus database settings r cnfigure it by yurself. Use the previus database settings If yu select this ptin, the previus database server fr Cntrl Service will be used fr the auditr database. T set an auditr database fr reprt service nly, the fllwing infrmatin must be cnfigured. Select the database type frm the drp-dwn list, nw nly MS SQL can be selected. Database Server The MS SQL server name. *Nte: It is recmmended creating the DcAve Auditr database n a different SQL server ther than the SQL server which stres the SharePint databases. If yu put the DcAve Auditr database and SharePint database n the same SQL Server, as the SharePint Auditr data grws, large amunt f disk space f the SQL Server machine will be ccupied when DcAve Cmpliance Reprts fetches data frm SharePint Auditr database and stres it t DcAve Auditr database. Thus the respnse f bth SQL Server and SharePint will becme slw. 28

Click Next. Auditr Database Name Enter a database name fr the Auditr database, if the database des nt exist, it will be created in the prvided MS SQL server. Database Credentials Select the credential fr this Auditr database. Windws Authenticatin (the default ptin) Use this methd when yu want the user identity t be cnfirmed by Windws. The specified accunt must have the permissin f accessing the SQL Server machine where yu want t create the auditr database. The user specified here must als have the fllwing permissin t the machine where the DcAve Manager will be installed: Lg n as a batch jb (fund in Cntrl Panel > Administrative Tls > Lcal Security Plicy > Security Settings > Lcal Plicies > User Rights Assignment). SQL Authenticatin SQL server will cnfirm the user identity itself accrding t the specified accunt and passwrd. The specified accunt must have the fllwing permissin: DB Owner f the existing DcAve 6 auditr database r DB Creatr f the newly created DcAve 6 auditr database. Advanced Database Settings Yu can chse t assciate the DcAve Auditr database with a specific failver SQL server that is used in cnjunctin with SQL Server database mirrring. 15. Set up the Advanced Cnfiguratin t encrypt infrmatin and prvide authenticatin fr DcAve. SSL Certificatin Specify the methd fr encrypting infrmatin and prviding authenticatin fr DcAve: Click Next. Build-in Certificate Uses the certificate prvided by DcAve. N additinal cnfiguratin is necessary. User-defined Certificate Enabling this ptin allws yu t select a certificate frm yur lcal machine. Use the Certificate Authenticatin server f the current machine t check whether the certificate is revked and filter the certificates t nly display the certificates that are nt revked. 16. In the Ready t install DcAve Manager page, all f the infrmatin cnfigured in the previus steps is listed. Click Install t begin the installatin. Click Back t change any f the previus settings. Click Cancel t abandn all cnfiguratins and exit the installatin wizard. 17. When the Manager installatin is cmpleted, the Manager Passphrase yu specified t prtect DcAve Manager data will be displayed n the Install Cmpleted page. Save this passphrase as yu need t enter it fr the agent installatin. After the installatin is cmplete, click Finish t exit the installatin wizard. 29

Installing DcAve Manager n Windws Server 2008 R2 Server Cre r Windws Server 2012 Server Cre Fllw the steps belw t install DcAve Manager n Windws Server 2008 R2 Server Cre r Windws Server 2012 Server Cre envirnment. 1. Generate the Manager Installatin Answer file n a server that des nt use the Windws Server Cre perating system. The Answer file is an XML file which prvides cnfiguratin infrmatin required fr DcAve Manager installatin n Windws Server 2008 R2 Server Cre r Windws Server 2012 Server Cre envirnments. Since the DcAve Setup Manager wizard which generates the Answer file cannt be run n Windws Server 2008 R2 Server Cre r Windws Server 2012 Server Cre envirnments, yu must first run the DcAve Setup Manager n a Windws envirnment that des meet the DcAve Manager System Requirements in rder t generate the Answer file necessary fr installing the DcAve Manager n a Windws Server 2008 R2 Server Cre r Windws Server 2012 Server Cre envirnment. Refer t the Generating the Installatin Answer File fr DcAve Manager sectin fr mre infrmatin. 2. Change the directry t the unzipped DcAve Manager installatin package in the Cmmand Line interface. 3. Enter the Manager installatin cmmand with the Answer file path, and press Enter t start the DcAve Manager installatin prcess. The cmmand is as fllws. Setup.exe Install-DcAveManager c:\answerfilemanager.xml 4. The prmpt message Cmplete is displayed in the Cmmand Line interface when the Manager installatin cmpletes. 30

DcAve Cntrl Service High Availability DcAve Cntrl service high availability can be achieved by installing DcAve Cntrl service n multiple servers using the same Cntrl Service database: (Recmmended) If yu install DcAve Cntrl service n multiple servers within the same Windws Netwrk Lad Balanced cluster, high availability f DcAve Cntrl service will be autmatically perfrmed by Windws perating system. Befre using the DcAve Cntrl Service high availability in this case, make sure the fllwing requirements are met: Enter the hstname r IP address f each individual server when installing DcAve Cntrl service n the crrespnding server. Use the Netwrk Lad Balanced cluster public IP address when installing ther DcAve Manager service(s). Use the Netwrk Lad Balanced cluster hstname and public IP address when accessing DcAve. If yu installed DcAve Cntrl service n several separated servers, yu must register the agents and media service t the Cntrl service yu want t access DcAve with. Shuld that Cntrl service be unavailable, yu must reregister the agents and media service t anther Cntrl service in rder t cntinue t access DcAve. *Nte: A Reprt Lcatin must be cnfigured in Jb Mnitr befre yu can use the Lg Manager and Jb Mnitr when DcAve Cntrl Service High Availability is used. Otherwise, each server where Cntrl Service is installed will retain its wn lg fr just the jbs carried ut by the cntrl service installed n the server. Fr mre infrmatin, refer t the DcAve 6 Jb Mnitr Reference Guide. 31

DcAve Agent Make sure the system requirements are met befre starting the DcAve Agent installatin. Fr mre infrmatin, refer t the System Requirements fr Agent Service Installatin sectin f this guide. Check that the DcAve Manage services have started befre installing the DcAve Agents. Installing DcAve Agents Installing DcAve Agent n Cmmn Envirnments DcAve Agent is able t be installed n the fllwing cmmn Windws envirnments. Windws Server 2003 Windws Server 2003 R2 Windws Server 2008 Windws Server 2008 R2 Windws XP Windws Vista Windws 7 Windws 8 Windws Server 2012 After the Manager s services have started, fllw the steps belw t install the DcAve Agent. 1. Dwnlad the Agent ZIP file, either by requesting a dem versin frm: http://www.avepint.cm/dwnlad/, r by cntacting an AvePint representative fr links t this package. 2. Unzip this package and navigate t the DcAve Agent directry. Duble click the Setup.exe file. 3. Frm the welcme screen, click Next. 4. Enter yur name and rganizatin int the prvided fields. 5. Click Next. 6. Carefully review the DcAve License Agreement. After yu have read the terms in the license agreement, check the I accept the terms in the license agreement checkbx then click Next. 7. Click the Brwse buttn. Select the lcatin fr the Agent installatin. By default, the installatin lcatin is C:\Prgram Files\AvePint. Click Next. 32

8. DcAve will perfrm a brief pre-scan f the envirnment t ensure that all rules meet the requirements. The status fr each rule will be listed in the Status clumn. Click the hyperlink f the status, the detailed infrmatin abut the scan result will be listed in the ppup windw. Click Details and yu can view the detailed infrmatin f all the requirements. Update yur envirnment t meet the requirements if there are sme rules checked failed. Click the Rescan buttn t check yur envirnment again. Once all rules pass, click Next. 9. Set up the Cmmunicatin Cnfiguratin. DcAve Agent Hst Specify the current server s hstname, IP address r fully qualified dmain name (FQDN). DcAve Agent Prt The prt specified here is used by the Manager r ther Agents fr cmmunicatin. The default prt number is 14004. Cntrl Service Address The hstname r IP address f the machine where installed Cntrl service. Cntrl Service Prt This is the prt used fr cmmunicatin with Cntrl Service and shuld match the infrmatin prvided during the Manager cnfiguratin. The default prt number is 14000. SSL Certificatin Specify the SSL Certificatin used fr the specified DcAve Manager. Click Next. 10. Set up the Agent Cnfiguratin: Agent Authenticatin Specify the Manager Passphrase specified when cnfiguring the DcAve Manager installatin. If yu frget the passphrase, yu can view it by navigating t DcAve > Cntrl Panel > System Settings > System Optins > Security Settings. Fr mre infrmatin, refer t the DcAve 6 Cntrl Panel Reference Guide. Agent Accunt Specify the Agent accunt under which the Agent activities are perfrmed. Fr detailed infrmatin n the permissins required fr each DcAve mdule, refer t that mdule s User Guide. Belw is the ideal accunt permissins fr all DcAve prducts: Lcal System Permissins The specified Agent Accunt will be granted full cntrl permissin t the fllwing grups and flders during DcAve Agent installatin. Member f the fllwing grups: IIS_WPG (fr IIS 6) r IIS_IUSRS (fr IIS 7 and IIS 8) Perfrmance Mnitr Users 33

DcAve Users(The grup is created by DcAve autmatically and it has the fllwing permissins) SharePint Permissins Full Cntrl t the Registry f HKEY_LOCAL_MACHINE\SOFTWARE\AvePint\DcAve6 Full Cntrl t the Registry f HKEY_LOCAL_MACHINE\System\CurrentCntrlSet\Services\eventlg Full Cntrl t the Cmmunicatin Certificate Permissin f Lg n as a batch jb (navigate t: Cntrl Panel\Administrative Tls\Lcal Security Plicy\Security Settings\Lcal Plicies\User Rights Assignment) Full Cntrl Permissin f DcAve Agent installatin directry Member f the Farm Administratrs grup Full Cntrl permissin t all znes f all web applicatins via User Plicy fr Web Applicatins User Prfile Service Applicatin permissins: Use Persnal Features Create Persnal Site Use Scial Features Managed Metadata Service: Term Stre Administratr Business Data Cnnectivity Service: Full Cntrl Search Service: Full Cntrl SQL Server Permissins Click Next. Database Rle f db_wner fr all the databases related with SharePint, including cntent databases, SharePint cnfiguratin database and Central Admin database. Database Rle f dbcreatr and Security Admin t SQL Server. 11. In the Ready t install DcAve Agent Page, review the custmer infrmatin yu defined. 12. Click Install t begin the installatin. Click Back t change any f the previus settings. Click Cancel t abandn all cnfiguratins and exit the installatin wizard. 13. After the installatin is cmplete, click Finish t exit the installatin wizard. 34

Cngratulatins! DcAve is nw installed and cnfigured, nce yu have cmpleted the prduct installatin, yu can begin t cnfigure lgical and physical devices needed t stre backup data. Installing DcAve Agent n Windws Server 2008 R2 Server Cre r Windws Server 2012 Server Cre Once the Manager s services have started, fllw the steps belw t install the DcAve Agent n Windws Server 2008 R2 Server Cre r Windws Server 2012 Server Cre envirnment. 1. Generate the Agent Installatin Answer file n a server that des nt use the Windws Server Cre perating system. The Answer file is an XML file which prvides cnfiguratin infrmatin required fr DcAve Agent installatin n Windws Server 2008 R2 Server Cre r Windws Server 2012 Server Cre envirnments. Since the DcAve Setup Manager wizard which generates the Answer file cannt be run n Windws Server 2008 R2 Server Cre r Windws Server 2012 Server Cre envirnments, yu must first run the DcAve Setup Manager n a Windws envirnment that des meet the DcAve Agent System Requirements in rder t generate the Answer file necessary fr installing the DcAve Agent n a Windws Server 2008 R2 Server Cre r Windws Server 2012 Server Cre envirnment. Refer t the Generating the Installatin Answer File fr DcAve Agent sectin fr mre infrmatin. 2. Change the directry t the unzipped DcAve Agent installatin package in the Cmmand Line interface. 3. Enter the Agent installatin cmmand with the Answer file path, and press Enter t start the DcAve Agent installatin prcess. The cmmand is as fllws. Setup.exe Install-DcAveAgent c:\answerfileagent.xml 4. The prmpt message Cmplete is displayed in the Cmmand Line interface when the Agent installatin cmpletes. Skipping Envirnment Scanning System requirements must be met in rder fr DcAve t wrk prperly. If yu are certain that yu meet all f the system requirements are met, the fllwing sectins prvide instructins n skipping envirnment scanning fr DcAve Manager and Agent installatin. *Nte: Envirnment scanning cannt be skipped when installing DcAve n Windws Server 2008 R2 Server Cre r Windws Server 2012 Server Cre envirnment. 35

Skipping Envirnment Scanning fr DcAve Manager Fllw the instructins belw t skip envirnment scanning fr DcAve Manager. 1. In the Cmmand Line Interface, change the directry t the extracted DcAve Manager package where the Setup.exe file resides. 2. Enter the fllwing cmmand t skip envirnment scanning. T skip system infrmatin scanning during DcAve Manager installatin, enter the fllwing cmmand t launch the Manager installatin prgram: Setup.exe -SkipRuleChecking T skip SQL Server versin scanning during DcAve Manager installatin, enter the fllwing cmmand t launch the Manager installatin prgram: Setup.exe -SkipSQLChecking T skip bth system infrmatin scanning and SQL Server versin scanning during DcAve Manager installatin, enter the fllwing cmmand t launch the Manager installatin prgram: Setup.exe -SkipRuleChecking -SkipSQLChecking 3. The scan status f each requirement displays Skip in the Installatin Rule Scanning step during Manager installatin. Skipping Envirnment Scanning fr DcAve Agent Fllw the instructins belw t skip envirnment scanning fr DcAve Agent. 1. In the Cmmand Line Interface, change the directry t the extracted DcAve Agent package where the Setup.exe file resides. 2. T skip system infrmatin scanning during DcAve Agent installatin, enter the fllwing cmmand t launch the Agent installatin prgram: Setup.exe -SkipRuleChecking 3. The scan status f each requirement displays Skip in the Installatin Rule Scanning step during Agent installatin. 36

Unattended Installatin DcAve Manager Make sure the system requirements are met befre starting the DcAve Manager unattended installatin. Fr mre infrmatin, refer t the DcAve Manager System Requirements sectin f this guide. Generating the Installatin Answer File fr DcAve Manager The Answer file is an XML file which prvides cnfiguratin infrmatin required fr the unattended installatin. Befre perfrming the unattended installatin, the Answer file must be generated using the DcAve 6 Setup Manager. Navigate t the \UnattendedInstall\SetupManager flder inside the unzipped Manager installatin package, and duble click SetupManager.exe t run it. Yu will be guided thrugh the fllwing steps. 1. After being presented with the welcme screen, click Next. 2. Select Create a new answer file fr DcAve 6 Manager t create a new Answer file fr DcAve Manager. Mdify an existing answer file Select this ptin t reuse an existing Answer file. If this is selected, the path field will be enabled. Enter the full path f the answer file is r click Brwse t brwse fr an answer file. Fr example, C:\AnswerFile.xml *Nte: We recmmend yu create a generic Answer file s that it can be reused later with mdificatin. Click Next. 3. Carefully review the DcAve License Agreement. After yu have read the terms in the license agreement, check the I accept the terms in the license agreement.checkbx t agree t the terms. Click Next. 4. Enter yur name and the rganizatin int the prvided field. Click Next t cntinue the cnfiguratin. Click Back t return t the previus interface. 5. Set up the installatin lcatin using the fllwing cnditins. Default directry The DcAve Manager will be installed t the default installatin lcatin n the specified destinatin server, which is \Prgram Files\AvePint\DcAve6\Manager. Custmized directry If yu select this ptin, enter a custmized path in the Installatin Path field where yu wish t install the DcAve Manager n the destinatin server. Use the default directry if yur custmized directry is invalid Enable this ptin t install DcAve Manager t the default directry shuld the path yu defined fr custmized directry be invalid. Fr example, if the drive indicated by the path yu specified des nt exist n the destinatin server. 37

6. Select the DcAve Manager service(s) yu want t install. There are three services yu can install. Cntrl Service Manages all DcAve peratins and cmmunicates with the webbased DcAve platfrm, allwing users t interact with the sftware. All agents cmmunicate with the manager via the Cntrl Service, s it is imperative that the machine yu install the cntrl service n is accessible by all agent machines. This service can be run n a Windws Netwrk Lad Balanced cluster t ensure high availability. Otherwise if the cntrl service is unavailable, a standby service in the cluster needs t be enabled by an administratr, and all agents and media service need t be reregistered t the new Cntrl service. Fr mre infrmatin, refer t the DcAve Cntrl Service High Availability sectin f this guide. Media Service Perfrms assistant jbs such as managing the retentin rules and managing the backup jb data. This service can be installed n multiple machines. Using multiple media services allws fr high availability and lad-balanced access t the data strage lcatins. Reprt Service Manages all SharePint data cllectins and managements, mnitr SharePint activities and return the data t the Cntrl Service fr prcessing. This must be cnfigured with the assciated SQL databases and SQL Reprt Services. This service is critical fr using the DcAve Reprt Center mdule. Click Next. *Nte: DcAve Reprt service can be installed n multiple servers and can be lad balanced. Hwever, all Reprt services must share the same Reprt Database and Auditr Database. 7. Set up the Cntrl Service Cnfiguratin: IIS Web Site Settings Cnfigure the IIS web site settings fr the Cntrl Service. The IIS web site is used t access DcAve Manager. IIS web site Enter the web site name and create a new IIS web site fr the Cntrl Service. The default Web Site Prt used t access DcAve Cntrl Service is 14000, yu d nt need t change it unless a knwn prt cnflict exists. Web Site Prt Cntrl Service cmmunicatin prt. The default prt is 14000. Applicatin Pl Settings Cnfigure the IIS applicatin pl settings fr the crrespnding web site. The applicatin pl is used t handle the requests sent t the crrespnding web site. Applicatin pl Enter the applicatin pl name fr the crrespnding web site. Applicatin Pl Accunt Enter an applicatin pl accunt t be the administratr f the specified applicatin pl, and the crrespnding passwrd. 38

*Nte: The applicatin pl accunt fr cnnecting an existing IIS web site r creating a new IIS web site must have the fllwing Lcal System Permissins: Member f the fllwing lcal grup: IIS_WPG (fr IIS 6) r IIS_IUSRS (fr IIS 7 and IIS 8) Full Cntrl t HKEY_LOCAL_MACHINE\SOFTWARE\AvePint\DcAve6 Full Cntrl t DcAve Manager flder Member f the Perfrmance Mnitr Users grup Full Cntrl t DcAve Certificate private keys Full Cntrl (r Read, Write, Mdify and Delete) t C:\WINDOWS\Temp (nly fr Windws 2003 envirnment) Yu can add the applicatin pl accunt t the lcal Administratrs grup t meet the required permissins. Click Next t cntinue t cnfigure the database settings fr the Cntrl Service. 8. Cnfigure a database fr string the relevant data f Cntrl Service. Database Type Only MS SQL Server is supprted t serve as the database server fr Cntrl Service. Database Server Enter the MS SQL server name. Cntrl Service Database Name Enter a database name fr the Cntrl Service, if the database des nt exist, it will be created in the prvided MS SQL server. Database Credentials Select the credential fr this cntrl service database. Windws Authenticatin (the default ptin) Use this methd when yu want the user identity t be cnfirmed by Windws. The specified accunt must have the necessary permissin t access the SQL Server machine where yu want t create the cntrl service database. The user specified here must als have the fllwing permissin t the machine where the DcAve Manager will be installed: Lg n as a batch jb (fund in Cntrl Panel > Administrative Tls > Lcal Security Plicy > Security Settings > Lcal Plicies > User Rights Assignment). SQL Authenticatin SQL server will cnfirm the user identity itself accrding t the specified accunt and passwrd. The specified accunt must have the fllwing permissin: DB Owner f the existing DcAve 6 cntrl database r DB Creatr f the newly created DcAve 6 cntrl database. Passphrase Settings Enter the passphrase yu want t use fr prtecting DcAve Manager data. 39

Advanced Database Settings Yu can chse t assciate the DcAve Cntrl database with a specific failver SQL server that is used in cnjunctin with SQL Server database mirrring. Click Next. 9. Set up the Media Service Cnfiguratin. Media Service Prt Used fr cmmunicating with the ther DcAve services. The default prt is 14001. Media Service Data Prt Transmit the data between DcAve and the strage device. The default prt is 14002. Use a randm prt number if the specified ne is being used Enable this ptin t have the DcAve Manager installatin prgram generate a randm prt if the Media Service Prt r Media Service Data Prt yu specified is being used by ther applicatins. If this ptin is nt enabled, the prt will nt be checked until installatin. Click Next. 10. Set up the Reprt Service Cnfiguratin. Reprt Service Prt The prt number fr Reprt Service. The default prt is 14003. Use a randm prt number if the specified ne is being used If enable this ptin, DcAve Manager installatin prgram will generate a randm prt if the specified Reprt Service Prt is being used by ther applicatins. If this ptin is nt enabled, the prt will nt be checked until installatin. Click Next t cntinue t cnfigure the database settings fr Reprt Service. 11. Fr the reprt service database, yu can select t use the previus database settings r cnfigure it yurself. Use the previus database settings (This ptin can nly be selected nce the Cntrl database is cnfigured in the previus step. If yu select this ptin, the previus database settings fr Cntrl database will be used fr the reprt database. T set a database fr reprt service nly, the fllwing infrmatin must be cnfigured. Database Type Only MS SQL Server is supprted t serve as the database server fr Reprt Service. Database Server Enter the MS SQL server name. Reprt Service Database Name Enter a database name fr the Reprt Service, if the database des nt exist, it will be created in the prvided MS SQL server. Database Credentials Select the credential fr this reprt service database. Windws Authenticatin (the default ptin) Use this methd when yu want the user identity t be cnfirmed by Windws. The specified accunt must have the necessary permissin t access the SQL Server machine where yu want t 40

create the reprt service database. The user specified here must als have the fllwing permissin t the machine where the DcAve Manager will be installed: Lg n as a batch jb (fund in Cntrl Panel > Administrative Tls > Lcal Security Plicy > Security Settings > Lcal Plicies > User Rights Assignment). SQL Authenticatin SQL server will cnfirm the user identity itself accrding t the specified accunt and passwrd. The specified accunt must have the fllwing permissin: DB Owner f the existing DcAve 6 reprt service database r DB Creatr f the newly created DcAve 6 reprt service database. Advanced Database Settings Yu can chse t assciate the DcAve Reprt database with a specific failver SQL server that is used in cnjunctin with SQL Server database mirrring. Click Next t cntinue t cnfigure the Auditr database settings fr the Reprt Service. 12. Fr the Auditr database, yu can select t use the previus database settings r cnfigure it yurself. Use the previus database settings If yu select this ptin, the previus database server fr Cntrl Service will be used fr the auditr database. T set an auditr database fr reprt service nly, the fllwing infrmatin must be cnfigured. Database Type Only MS SQL Server is supprted t serve as the database server fr Reprt Service. Database Server Enter the MS SQL server name. *Nte: It is recmmended t create the DcAve Auditr database n a different SQL server than the SQL server that stres the SharePint databases. Since DcAve Auditr Cntrller retrieves data frm the SharePint Auditr database, if yu have DcAve Auditr Cntrller retrieving data n a frequent schedule, as the amunt f data in the SharePint Auditr database grws, a large amunt f disk space will be taken up n the SQL Server machine. This can cause perfrmance issues fr bth the SQL Server and SharePint. Auditr Database Name Enter a database name fr the Auditr database, if the database des nt exist, it will be created in the prvided MS SQL server. Database Credentials Select the credential fr this Auditr database. Windws Authenticatin (the default ptin) Use this methd when yu want the user identity t be cnfirmed by Windws. The specified accunt must have the necessary permissins t access the SQL Server machine where yu want t create the auditr database. The user specified here must als have the fllwing permissin t the machine where the DcAve Manager will be installed: Lg n as a batch jb (fund in Cntrl Panel > Administrative Tls > 41

Lcal Security Plicy > Security Settings > Lcal Plicies > User Rights Assignment). SQL Authenticatin SQL server will cnfirm the user identity itself accrding t the specified accunt and passwrd. The specified accunt must have the fllwing permissin: DB Owner f the existing DcAve 6 auditr database r DB Creatr f the newly created DcAve 6 auditr database. Advanced Database Settings Yu can chse t assciate the DcAve Auditr database with a specific failver SQL server that is used in cnjunctin with SQL Server database mirrring. 13. Once all f the required infrmatin has been cnfigured, click Save, and specify the path yu want t save the Answer file t. Yu can als mdify the Answer file s name in the pp-up windw. Perfrm the DcAve Manager Unattended Installatin Imprt the UnattendedInstallatin.dll File Befre perfrming the DcAve Manager unattended installatin, the UnattendedInstallatin.dll file must be imprted int Windws PwerShell using either f the tw methds belw. *Nte: If the UnattendedInstallatin.dll file is nt imprted successfully, use the Set-ExecutinPlicy cmmand t set the executin plicy t AllSigned in Windws PwerShell and perfrm the imprt again using ne f the fllwing methds. T manually imprt the UnattendedInstallatin.dll file, cmplete the fllwing steps: 1. Click Start n the server with the unzipped Manager installatin package residing in, and find Windws PwerShell. Right click n it, and select Run as administratr t run it. 2. Enter the fllwing cmmand, and press Enter t imprt the UnattendedInstallatin.dll file: Imprt-Mdule \UnattendedInstall\PwerShellMdules\UnattendedInstallatin.dll *Nte: The warning message displayed in the screensht abve is caused by sme terminlgies in the UnattendedInstallatin.dll file vilating Windws PwerShell s naming cnventin. It has n effect n file imprting. The UnattendedInstallatin.dll file is imprted successfully. 42

T autmatically imprt the UnattendedInstallatin.dll file, cmplete the fllwing steps: 1. Navigate t the \UnattendedInstall\PwerShellMdules flder inside the unzipped Manager installatin package. 2. Right click n the UnattendedInstallatinLauncher.bat file, and select Run as administratr t run it. Nw that yu have imprted the UnattendedInstallatin.dll file, yu can use the cmmands in the fllwing sectins t check yur envirnment, perfrm the manager installatin and cnfigure settings. Cmmands and Cmmand Parameters fr DcAve Manager Unattended Installatin Envirnment Checking Cmmand Befre executing DcAve Manager installatin cmmand, yu can use the Check-ManagerEnvirnment cmmand t check whether the destinatin server yu want t install DcAve Manager meet DcAve Manager System Requirements. *Nte: The Check-ManagerEnvirnment cmmand is nt available when the destinatin machine uses Windws Server 2008 R2 Server Cre r Windws Server 2012 Server Cre Operating System. Fr example: Check-ManagerEnvirnment -TargetName 10.0.0.1 -Username AvePint\DcAve -Passwrd Ave - CheckEnvirnmentFile C:\DcAve_Manager\DcAve.dat -AnswerFilePath "C:\AnswerFile.xml" This table cntains detailed infrmatin fr each f the parameters: Parameter Type Descriptin -TargetName Required The name r IP address f the destinatin machine where yu want t install the DcAve Manager. *Nte: If the hstname is used, ensure that the specified cmputer name can be reslved thrugh the lcal Hsts file, by using Dmain Name System (DNS) queries, r thrugh NetBIOS name reslutin techniques. -Username Required The username f the user used t access the destinatin machine where yu want t install the DcAve Manager. The frmat f the username is: dmain\username. The permissins f the user specified here are as fllws: If the specified user is the lcal administratr 43

Parameter Type Descriptin f the destinatin machine, it can be used directly. Enter.\administratr fr the Username parameter. If the specified user is frm the dmain which the destinatin machine belngs t, the dmain user must be added t the Administratrs grup n the destinatin machine. The user specified here must have the Full Cntrl permissin t the path specified in RemteTempPath parameter. -Passwrd Required The passwrd f the user specified abve. - CheckEnvirnmentFilePath Required Qute the passwrd if it cntains any special character r space. The lcal path f the DcAve.dat file that is residing in the unzipped DcAve Manager installatin package. The path must be detailed t the name f the data file. Fr example, C:\DcAve_Manager\ DcAve.dat. -AnswerFilePath Required The lcal path where yu saved the Answer file. The path must be detailed t the name f the Answer file. Fr example, C:\AnswerFileManager.xml. -RemteTempPath Required A lcal path n the destinatin machine that the DcAve Manager is installed t. The frmat f the path is: C:\temp. The path will be used t stre the temprary files generated during the DcAve Manager unattended installatin. The temprary files will be deleted as sn as the unattended installatin finishes. -Lg Optinal This is an ptinal parameter. If used, the envirnment checking lgs will be saved t the.txt file in the specified path. The generated lg file is a text file. The path specified in this parameter must be detailed t the name f the lg file. Fr example, C:\Lg.txt. If the specified lg file des nt exist, it will be generated autmatically. 44

Parameter Type Descriptin -PrductType Required This parameter is used t identify the prduct yu are installing frm ther AvePint s prducts. Enter DcAve as the value f this parameter when yu install DcAve prducts. Installatin Cmmand The DcAve Manager Unattended Installatin cmmand fr installing DcAve Manager remtely is Install-DAManager. Fr example: Install-DAManager -TargetName 10.0.0.1 -Username AvePint\DcAve -Passwrd Ave - PackageFilesFlder "C:\DcAve_Manager" -AnswerFilePath "C:\AnswerFile.xml" -RemteTempPath C:\TempFlder -PrductType DcAve *Nte: The Install-DAManager cmmand is nt available when the destinatin machine uses Windws Server 2008 R2 Server Cre r Windws Server 2012 Server Cre Operating System. This table cntains detailed infrmatin fr each f the parameters: Parameter Type Descriptin -TargetName Required The name r IP address f the destinatin machine where yu want t install the DcAve Manager. *Nte: If the hstname is used, ensure that the specified cmputer name can be reslved thrugh the lcal Hsts file, by using Dmain Name System (DNS) queries, r thrugh NetBIOS name reslutin techniques. -Username Required The username f the user used t access the destinatin machine where yu want t install the DcAve Manager. The frmat f the username is: dmain\username. The permissins f the user specified here are as fllws: If the specified user is the lcal administratr f the destinatin machine, it can be used directly. Enter.\administratr fr the Username parameter. If the specified user is frm the dmain 45

Parameter Type Descriptin which the destinatin machine belngs t, the dmain user must be added t the Administratrs grup n the destinatin machine. The user specified here must have the Full Cntrl permissin t the path specified in RemteTempPath parameter. -Passwrd Required The passwrd f the user specified abve. Qute the passwrd if it cntains any special character r space. -PackageFilesFlder Required The lcal path n the machine where yu run the cmmand. The specified path stres the unzipped DcAve Manager installatin package (Manager ZIP file). The frmat f the path is: C:\package. Qute the path if it cntains any special character r space. -AnswerFilePath Required The lcal path where yu saved the Answer file. The path must be detailed t the name f the Answer file. Fr example, C:\AnswerFile.xml. -RemteTempPath Required A lcal path n the destinatin machine that the DcAve Manager is installed t. The frmat f the path is: C:\temp. The path will be used t stre the temprary files generated during the DcAve Manager unattended installatin. The temprary files will be deleted as sn as the unattended installatin finishes. -Lg Optinal This is an ptinal parameter. If used, the lgs f the unattended installatin will be saved t the.txt file in the specified path. The path specified in this parameter must be detailed t the name f the lg file. Fr example, C:\Lg.txt. If the specified lg file des nt exist, it will be generated autmatically. 46

Parameter Type Descriptin -UseIPv6frCmmunicatin Optinal This is an ptinal parameter used t specify the cmmunicatin methd between the machine where the cmmand is run and the destinatin machine that the DcAve Manager is installed. If an IPv6 address is entered in TargetName parameter, this parameter must be entered. *Nte: When using this parameter, bth the destinatin machine and the machine where yu run this cmmand must supprt IPv6. -PrductType Required This parameter is used t identify the prduct yu are installing frm ther AvePint s prducts. -ServerCre Required when the destinatin is Windws Server 2008 R2 Server Cre r Windws Server 2012 Server Cre Enter DcAve as the value f this parameter when yu install DcAve prducts. This parameter is nly required when yu install DcAve Manager t Windws Server 2008 Server Cre r Windws Server 2012 Server Cre. envirnment. The value f this parameter must be set t true. Getting Cnfiguratin Infrmatin Cmmand The Get-DAManagerCnfigInf cmmand allws yu t remtely get the cnfiguratin infrmatin f DcAve Manager. Yu can nt nly get the cnfiguratin infrmatin f the Managers installed remtely thrugh the use f Unattended Installatin, but als can get the cnfiguratin infrmatin f the Managers installed lcally thrugh the use f installatin wizard. In a wrd, yu are able t remtely get the cnfiguratin infrmatin f any Managers. *Nte: The Get-DAManagerCnfigInf cmmand is nt available when the destinatin machine uses Windws Server 2008 R2 Server Cre r Windws Server 2012 Server Cre Operating System. Belw is an example f the Get-DAManagerCnfigInf cmmand: Get-DAManagerCnfigInf -TargetName 10.0.0.1 -Username AvePint\DcAve -Passwrd Ave This table cntains detailed infrmatin fr each f the parameters: 47

Parameter Type Descriptin -TargetName Required The name r IP address f the destinatin machine where has DcAve Manager installed. *Nte: If the hstname is used, ensure that the specified cmputer name can be reslved thrugh the lcal Hsts file, by using Dmain Name System (DNS) queries, r thrugh NetBIOS name reslutin techniques. -Username Required The username f the user used t access the destinatin machine where has DcAve Manager installed. The frmat f the username is: dmain\username. The permissins f the user specified here are as fllws: If the specified user is the lcal administratr f the destinatin machine, it can be used directly. Enter.\administratr fr the Username parameter. If the specified user is frm the dmain which the destinatin machine belngs t, the dmain user must be added t the Administratrs grup n the destinatin machine. The user specified here must have the Full Cntrl permissin t the path specified in RemteTempPath parameter. -Passwrd Required The passwrd f the user specified abve. Qute the passwrd if it cntains any special character r space. -Lg Optinal This is an ptinal parameter. If used, the cnfiguratin infrmatin lgs will be saved t the.txt file in the specified path. The generated lg file is a text file. The path specified in this parameter must be detailed t the name f the lg file. Fr example, C:\Lg.txt. If the specified lg file des nt exist, it will be generated autmatically. -AnswerFilePath Optinal This is an ptinal parameter. If used, the cnfiguratin infrmatin yu get by the Get-DAManagerCnfigInf cmmand will be exprted t the.xml file in the specified path. Only the.xml file is supprted by this parameter. The cntent frmat f the generated.xml file is the same as the Manager Answer File. 48

Parameter Type Descriptin The path specified in this parameter must be detailed t the name f the lg file. Fr example, C:\ManagerCnfigInfr.xml. There must be n.xml file with the same name existing in the specified path. -PrductType Required This parameter is used t identify the prduct yu are installing frm ther AvePint s prducts. -ServerCre Required when the destinatin is Windws Server 2008 R2 Server Cre r Windws Server 2012 Server Cre Enter DcAve as the value f this parameter when yu install DcAve prducts. This parameter is nly required when yu install DcAve Manager t Windws Server 2008 Server Cre r Wndws Server 2012 Server Cre envirnment. The value f this parameter must be set t true. Cnfiguring Cnfiguratin Infrmatin Cmmand The Cnfig-DAManagerCnfigInf cmmand allws yu t remtely mdify the cnfiguratin infrmatin f DcAve Manager. Yu can nt nly mdify the cnfiguratin infrmatin f the Managers installed remtely thrugh the use f Unattended Installatin, but als can mdify the cnfiguratin infrmatin f the Managers installed lcally thrugh the use f installatin wizard. In a wrd, yu are able t remtely mdify the cnfiguratin infrmatin f any Managers. *Nte: The Cnfig-DAManagerCnfigInf cmmand is nt available when the destinatin machine uses Windws Server 2008 R2 Server Cre r Windws Server 2012 Server Cre Operating System. Fr example: Cnfig-DAManagerCnfigInf -TargetName 10.0.0.1 -Username AvePint\DcAve -Passwrd Ave - UseCntrlServiceFailverDatabse true -UseWindwsAuthenticatinFrCntrlServiceDatabase true UseReprtFailverDatabase true This table cntains detailed infrmatin fr each f the parameters: Parameter Type Descriptin -TargetName Required The name r IP address f the destinatin machine where has the DcAve Manager installed. 49

Parameter Type Descriptin *Nte: If the hstname is used, ensure that the specified cmputer name can be reslved thrugh the lcal Hsts file, by using Dmain Name System (DNS) queries, r thrugh NetBIOS name reslutin techniques. -Username Required The username f the user used t access the destinatin machine where yu want t install the DcAve Manager. The frmat f the username is: dmain\username. The permissins f the user specified here are as fllws: If the specified user is the lcal administratr f the destinatin machine, it can be used directly. Enter.\administratr fr the Username parameter. If the specified user is frm the dmain which the destinatin machine belngs t, the dmain user must be added t the Administratrs grup n the destinatin machine. The user specified here must have the Full Cntrl permissin t the path specified in RemteTempPath parameter. -Passwrd Required The passwrd f the user specified abve. Qute the passwrd if it cntains any special character r space. -CntrlServiceHst Optinal If the hst r IP f the destinatin server that has Cntrl Service installed is changed, use this parameter t change the hst r IP f the Cntrl Service t the new ne. -WebSitePrt Optinal The new web site prt yu want t use fr the DcAve - UseCntrlServiceFail verdatabse - CntrlServiceFailve rdatabse - UseWindwsAuthenti catinfrcntrlservi cedatabase Optinal Optinal Optinal Manager installed n the destinatin machine. Enable the failver database server functin fr the Cntrl database. If the Cntrl database n the destinatin machine is nt assciating a failver database server, set the value f this parameter t True allws yu t specify a failver database server in the fllwing parameter. The failver SQL server yu want t assciate t the Cntrl database. Using this parameter t change the authenticatin f the Cntrl Service database between Windws Authenticatin and SQL Authenticatin. 50

Parameter Type Descriptin If the current authenticatin being used in the destinatin Cntrl Service database is Windws Authenticatin, yu can set the value f this parameter t False t change the authenticatin t SQL Authenticatin, and vise verse. - CntrlDatabaseUser name - CntrlDatabasePass wrd Optinal Optinal The new accunt yu want t use t authenticate the Cntrl Service database n the destinatin machine. The passwrd f the user specified abve. Qute the passwrd if it cntains any special character r space. -MediaServiceHst Optinal If the hst r IP f the destinatin server that has Media Service installed is changed, use this parameter t change the hst r IP f the Media Service t the new ne. -MediaServicePrt Optinal The new Media Service prt yu want t use fr the Media Service. - MediaServiceDataPr t - MediaCntrlService Hst - MediaCntrlService Prt Optinal Optinal Optinal The new Media Service data prt yu want t use fr the Media Service. If the hst f the Cntrl Service that the Media Service is registered in is changed, use this parameter t change the hst f the Cntrl Service t the new ne. If the prt f the Cntrl Service that the Media Service is registered in is changed, use this parameter t change the prt f the Cntrl Service t the new ne. -ReprtServiceHst Optinal If the hst r IP f the destinatin server that has Reprt Service installed is changed, use this parameter t change the hst r IP f the Reprt Service t the new ne. -ReprtServicePrt Optinal The new prt yu want t use fr the Reprt Service. - ReprtCntrlService Hst - ReprtCntrlService Prt - UseReprtFailverDa tabase - ReprtFailverDataba se Optinal Optinal Optinal Optinal If the hst f the Cntrl Service that the Reprt Service is registered in is changed, use this parameter t change the hst f the Cntrl Service t the new ne. If the prt f the Cntrl Service that the Reprt Service is registered in is changed, use this parameter t change the prt f the Cntrl Service t the new ne. Enable the failver database server functin fr the Reprt database. If the Reprt database n the destinatin machine is nt assciating a failver database server, set the value f this parameter t True allws yu t specify a failver database server in the fllwing parameter. The failver SQL server yu want t assciate t the Reprt database. - Optinal Using this parameter t change the authenticatin f the 51

Parameter Type Descriptin UseWindwsAuthenti catinfrreprtservi cedatabase - ReprtDatabaseUser name - ReprtDatabasePass wrd - UseAuditrFailverDa tabase - AuditrFailverDatab ase - UseWindwsAuthenti catinfrauditrdata base - AuditrDatabaseUser name - AuditrDatabasePass wrd Optinal Optinal Optinal Optinal Optinal Optinal Optinal Reprt Service database between Windws Authenticatin and SQL Authenticatin. If the current authenticatin being used in the destinatin Reprt Service database is Windws Authenticatin, yu can set the value f this parameter t False t change the authenticatin t SQL Authenticatin, and vise verse. The new accunt yu want t use t authenticate the Reprt Service database n the destinatin machine. The passwrd f the user specified abve. Qute the passwrd if it cntains any special character r space. Enable the failver database server functin fr the Auditr database. If the Auditr database n the destinatin machine is nt assciating a failver database server, set the value f this parameter t True allws yu t specify a failver database server in the fllwing parameter. The failver SQL server yu want t assciate t the Auditr database. Using this parameter t change the authenticatin f the Auditr database between Windws Authenticatin and SQL Authenticatin. If the current authenticatin being used in the destinatin Auditr database is Windws Authenticatin, yu can set the value f this parameter t False t change the authenticatin t SQL Authenticatin, and vise verse. The new accunt yu want t use t authenticate the Auditr database n the destinatin machine. The passwrd f the user specified abve. Qute the passwrd if it cntains any special character r space. -Lg Optinal This is an ptinal parameter. If used, the cnfiguratin infrmatin lgs will be saved t the.txt file in the specified path. The generated lg file is a text file. The path specified in this parameter must be detailed t the name f the lg file. Fr example, C:\Lg.txt. 52

Parameter Type Descriptin If the specified lg file des nt exist, it will be generated autmatically. -PrductType Required This parameter is used t identify the prduct yu are installing frm ther AvePint s prducts. -ServerCre Required when the destinatin is Windws Server 2008 R2 Server Cre r Windws Server 2012 Server Cre Enter DcAve as the value f this parameter when yu install DcAve prducts. This parameter is nly required when yu install DcAve Manager t Windws Server 2008 Server Cre r Wndws Server 2012 Server Cre envirnment. The value f this parameter must be set t true. Verifying Cnfiguratin Infrmatin Cmmand The Verify-DAManagerCnfigInf cmmand allws yu t remtely verify that the cnfiguratin infrmatin yu want t use fr DcAve Manager is valid. Yu can verify the cnfiguratin infrmatin fr the Managers installed remtely thrugh the use f Unattended Installatin and mdify the cnfiguratin infrmatin fr the Managers installed lcally with the installatin wizard. *Nte: The Verify-DAManagerCnfigInf cmmand is nt available when the destinatin machine uses Windws Server 2008 R2 Server Cre Operating System and Windws Server 2012 Server Cre Operating Systems. Belw is an example f the Verify-DAManagerCnfigInf cmmand: Verify -DAManagerCnfigInf -TargetName 10.0.0.1 -Username AvePint\DcAve -Passwrd Ave - UseCntrlServiceFailverDatabse true -UseWindwsAuthenticatinFrCntrlServiceDatabase true UseReprtFailverDatabase true This table cntains detailed infrmatin fr each f the parameters: Parameter Type Descriptin -TargetName Required The name r IP address f the destinatin machine where has the DcAve Manager installed. *Nte: If the hstname is used, ensure that the specified cmputer name can be reslved thrugh the lcal Hsts file, by using Dmain Name System (DNS) queries, r 53

Parameter Type Descriptin thrugh NetBIOS name reslutin techniques. -Username Required The username f the user used t access the destinatin machine where yu want t install the DcAve Manager. The frmat f the username is: dmain\username. The permissins f the user specified here are as fllws: If the specified user is the lcal administratr f the destinatin machine, it can be used directly. Enter.\administratr fr the Username parameter. If the specified user is frm the dmain which the destinatin machine belngs t, the dmain user must be added t the Administratrs grup n the destinatin machine. The user specified here must have the Full Cntrl permissin t the path specified in RemteTempPath parameter. -Passwrd Required The passwrd f the user specified abve. Qute the passwrd if it cntains any special character r space. -CntrlServiceHst Optinal The Cntrl Service hst r IP yu want t verify fr the destinatin machine. -WebSitePrt Optinal The website prt yu want t verify fr the DcAve - UseCntrlServiceFail verdatabse - CntrlServiceFailve rdatabse - UseWindwsAuthenti catinfrcntrlservi cedatabase - CntrlDatabaseUser name - CntrlDatabasePass wrd Optinal Optinal Optinal Optinal Optinal Manager installed n the destinatin machine. Set True as the value f this parameter and verify whether yu can specify a failver SQL Server fr the Cntrl database. Set the hst r IP address f the failver SQL Server as the value f this parameter and verify whether the specified SQL Server is available. Set True r False as the value f this parameter and verify whether yu can use Windws Authenticatin fr the Cntrl database. Verifying the accunt yu want t use t authenticate the Cntrl Service database n the destinatin machine. Verifying the passwrd fr the specified accunt abve. Qute the passwrd if it cntains any special character r space. -MediaServiceHst Optinal The Media Service hst r IP yu want t verify fr the destinatin machine. 54

Parameter Type Descriptin -MediaServicePrt Optinal The Media Service prt yu want t verify fr the DcAve Manager installed n the destinatin machine. - MediaServiceDataPrt - MediaCntrlService Hst - MediaCntrlService Optinal Optinal Optinal The Media Service prt yu want t verify fr the DcAve Manager installed n the destinatin machine. Verifying the hst r IP f the Cntrl Service that the Media Service is registered in. Verifying the prt f the Cntrl Service that the Media Service is registered in. Prt -ReprtServiceHst Optinal The Reprt Service hst r IP yu want t verify fr the destinatin machine. -ReprtServicePrt Optinal The Reprt Service prt yu want t verify fr the DcAve Manager installed n the destinatin machine. - ReprtCntrlService Hst - ReprtCntrlService Prt - UseReprtFailverDa tabase - ReprtFailverDataba se - UseWindwsAuthenti catinfrreprtservi cedatabase - ReprtDatabaseUser name - ReprtDatabasePass wrd - UseAuditrFailverDa tabase - AuditrFailverDatab ase - UseWindwsAuthenti Optinal Optinal Optinal Optinal Optinal Optinal Optinal Optinal Optinal Optinal Verifying the hst r IP f the Cntrl Service that the Reprt Service is registered in. Verifying the prt f the Cntrl Service that the Reprt Service is registered in. Set True as the value f this parameter and verify whether yu can specify a failver SQL Server fr the Reprt database. Set the hst r IP address f the failver SQL Server as the value f this parameter and verify whether the specified SQL Server is available. Set True r False as the value f this parameter and verify whether yu can use Windws Authenticatin fr the Reprt database. Verifying the accunt yu want t use t authenticate the Reprt Service database n the destinatin machine. Verifying the passwrd fr the specified accunt abve. Qute the passwrd if it cntains any special character r space. Set True as the value f this parameter and verify whether yu can specify a failver SQL Server fr the Auditr database. Set the hst r IP address f the failver SQL Server as the value f this parameter and verify whether the specified SQL Server is available. Set True r False as the value f this parameter and verify whether yu can use Windws Authenticatin fr the 55

Parameter Type Descriptin catinfrauditrdata Auditr database. base - AuditrDatabaseUser name Optinal - AuditrDatabasePass wrd Optinal Verifying the accunt yu want t use t authenticate the Auditr Service database n the destinatin machine. Verifying the passwrd fr the specified accunt abve. Qute the passwrd if it cntains any special character r space. -Lg Optinal This is an ptinal parameter. If used, the verifying cnfiguratin lg infrmatin will be saved t the.txt file in the specified path. The generated lg file is a text file. The path specified in this parameter must be detailed t the name f the lg file. Fr example, C:\Lg.txt. If the specified lg file des nt exist, it will be generated autmatically. -PrductType Required This parameter is used t identify the prduct yu are installing frm ther AvePint s prducts. -ServerCre Required when the destinatin is Windws Server 2008 R2 Server Cre r Windws Server 2012 Server Cre Enter DcAve as the value f this parameter when yu install DcAve prducts. This parameter is nly required when yu install DcAve Manager t Windws Server 2008 Server Cre r Wndws Server 2012 Server Cre envirnment. The value f this parameter must be set t true. 56

Unattended Installatin DcAve Agent The DcAve Agent can be installed remtely using the unattended installatin after the Manager s services have started. Make sure the system requirements are met befre starting the DcAve Agent unattended installatin. Fr mre infrmatin, refer t the System Requirements fr Agent Service Installatin sectin f this guide. Fr mre infrmatin n where t install the DcAve Agents, refer t sectin Where t Install DcAve Agent. Generating the Installatin Answer File fr DcAve Agent The Answer file is an XML file which prvides cnfiguratin infrmatin required fr the unattended installatin. Befre perfrming the unattended installatin, the Answer file must be generated using the DcAve 6 Setup Manager. Navigate t the \UnattendedInstall\SetupManager flder inside the unzipped Manager installatin package, and duble click SetupManager.exe t run it. Yu will be guided thrugh the fllwing steps. 1. After being presented with the welcme screen, click Next. 2. Select Create a new answer file fr DcAve 6 Agent t create a new Answer file fr DcAve Agent Mdify an existing answer file Select this ptin t reuse an existing Answer file. If this is selected, the path field will be enabled. Enter the full path f the answer file r click Brwse t brwse fr an answer file. Fr example, C:\AnswerFile.xml *Nte: We recmmend yu create a generic Answer file s that it can be reused later with mdificatin. 3. Click Next. 4. Carefully review the DcAve License Agreement. After yu have read the terms in the license agreement, click n the check-bx t select I accept the terms in the license agreement. Click Next. 5. Enter yur name and the rganizatin int the prvided field. Click Next t cntinue the cnfiguratin. Click Back t g back t the previus interface. 6. Set up the installatin lcatin using the fllwing cnditins. Default Directry The DcAve Agent will be installed t the default installatin lcatin n the specified destinatin server, which is \Prgram Files\AvePint\DcAve6\Agent. 57

Custmized Directry If select this ptin, the Installatin Path field will be enabled, enter a custmized path and the DcAve Agent will be installed t the specified path n the destinatin server. Use the default directry if yur custmized directry is invalid If this ptin is selected, the DcAve Agent will be installed t the default directry when the custmized directry is invalid. Fr example, the path yu specified is n a drive which des nt exist n the destinatin server. 7. Set up the Cntrl Service cnfiguratin: DcAve 6 Cntrl Service Hst The hstname r IP address f the machine where installed Cntrl service. DcAve 6 Cntrl Service Prt This is the prt used fr cmmunicatin with Cntrl Service and shuld match the infrmatin prvided during the Manager cnfiguratin. The default prt number is 14000. 8. Set up the Agent prt: DcAve 6 Agent Prt The prt specified here is used by the Manager r ther Agents fr cmmunicatin. The default prt number is 14004. 9. Set up the Agent cnfiguratin: Use a randm prt number if the specified ne is being used If select this ptin, DcAve will use a randm prt number if the prt yu specified has already been used. This ptin is selected by default. Manager Passphrase Enter the Manager Passphrase specified when cnfiguring the DcAve Manager installatin answer file. DcAve Agent Accunt Specify the username and passwrd f the Agent accunt under which the Agent activities are perfrmed. Refer t Agent Accunt fr the detailed permissins required fr this accunt. 10. Review the cnfiguratin, if the cnfiguratin is marked with, yu must prvide the required infrmatin befre this Answer file can be saved. 11. Once all the required infrmatin has been cnfigured, click Save, and specify the path yu want t save the Answer file t. Yu can als mdify the Answer file s name in the pp-up windw. 58

Perfrm the DcAve Agent Unattended Installatin Imprt the UnattendedInstallatin.dll File Befre perfrming the DcAve Agent unattended installatin, the UnattendedInstallatin.dll file must be imprted int Windws PwerShell using either f the tw methds belw. *Nte: If the UnattendedInstallatin.dll file is nt imprted successfully, use the Set-ExecutinPlicy cmmand t set the executin plicy t AllSigned in Windws PwerShell and perfrm the imprt again using either f the tw methds belw. T manually imprt the UnattendedInstallatin.dll file, cmplete the steps belw. 1. Click Start, and find Windws PwerShell. Right click n it, and select Run as administratr t run it. 2. Enter the fllwing cmmand, and press Enter t imprt the UnattendedInstallatin.dll file: Imprt-Mdule \UnattendedInstall\PwerShellMdules\UnattendedInstallatin.dll *Nte: The warning message displayed in the screensht abve is caused by sme terminlgies in the UnattendedInstallatin.dll file vilating Windws PwerShell s naming cnventin. It has n effect n file imprting. The UnattendedInstallatin.dll file is imprted successfully. T autmatically imprt the UnattendedInstallatin.dll file 1. Navigate t the \UnattendedInstall\PwerShellMdules flder inside the unzipped Manager installatin package. 2. Right click n the UnattendedInstallatinLauncher.bat file, and select Run as administratr t run it. *Nte: The value f the Set-ExecutinPlicy f the Pwershell must be set as AllSigned. Nw that yu have imprted the UnattendedInstallatin.dll file, yu can use the cmmands in the fllwing sectins t check yur envirnment, perfrm the agent installatin and cnfigure settings. 59

Cmmands and Cmmand Parameters fr DcAve Agent Unattended Installatin Envirnment Checking Cmmand Befre executing DcAve Agent installatin cmmand, yu can use the Check-AgentEnvirnment cmmand t check whether the destinatin server yu want t install DcAve Agent meet DcAve Agent System Requirements. *Nte: The Check-AgentEnvirnment cmmand is nt available when the destinatin machine uses Windws Server 2008 R2 Server Cre r Windws Server 2012 Server Cre Operating System. Belw is an example f the Check-AgentEnvirnment cmmand: Check-AgentEnvirnment -TargetName 10.0.0.1 -Username AvePint\DcAve -Passwrd Ave - CheckEnvirnmentFilePath C:\DcAve_Agent\DcAve.dat -AnswerFilePath "C:\AnswerFileAgent.xml" This table cntains detailed infrmatin fr each f the parameters: Parameter Type Descriptin -TargetName Required The name r IP address f the destinatin machine where yu want t install the DcAve Agent. *Nte: If the hstname is used, ensure that the specified cmputer name can be reslved thrugh the lcal Hsts file, by using Dmain Name System (DNS) queries, r thrugh NetBIOS name reslutin techniques. -Username Required The username f the user used t access the destinatin machine where yu want t install the DcAve Agent. The frmat f the username is: dmain\username. The permissins f the user specified here are as fllws: If the specified user is the lcal administratr f the destinatin machine, it can be used directly. Enter.\administratr fr the Username parameter. If the specified user is frm the dmain which the destinatin machine belngs t, the dmain user must be added t the Administratrs grup n the destinatin 60

Parameter Type Descriptin machine. The user specified here must have the Full Cntrl permissin t the path specified in RemteTempPath parameter. -Passwrd Required The passwrd f the user specified abve. - CheckEnvirnmentFilePath Required Qute the passwrd if it cntains any special character r space. The lcal path f the DcAve.dat file that is residing in the unzipped DcAve Agent installatin package. The path must be detailed t the name f the data file. Fr example, C:\DcAve_Agent\ DcAve.dat. -AnswerFilePath Required The lcal path where yu saved the Answer file. The path must be detailed t the name f the Answer file. Fr example, C:\AnswerFileAgent.xml. -RemteTempPath Required A lcal path n the destinatin machine that the DcAve Agent is installed t. The frmat f the path is: C:\temp. The path will be used t stre the temprary files generated during the DcAve Agent unattended installatin. The temprary files will be deleted as sn as the unattended installatin finishes. -Lg Optinal This is an ptinal parameter. If used, the envirnment checking lgs will be saved t the.txt file in the specified path. The generated lg file is a text file. The path specified in this parameter must be detailed t the name f the lg file. Fr example, C:\Lg.txt. If the specified lg file des nt exist, it will be generated autmatically. -PrductType Required This parameter is used t identify the prduct yu are installing frm ther AvePint s prducts. Enter DcAve as the value f this parameter when yu install DcAve prducts. 61

Installatin Cmmand The DcAve Agent Unattended Installatin cmmand fr installing DcAve Agent remtely is Install- DAAgent. *Nte: The Install-DAAgent cmmand is nt available when the destinatin machine uses Windws Server 2008 R2 Server Cre r Windws Server 2012 Server Cre Operating System. Fr example: Install-DAAgent -TargetName 10.0.0.1 -Username AvePint\DcAve -Passwrd Ave - PackageFilesFlder "C:\DcAve_Agent" -AnswerFilePath "C:\AnswerFile.xml" -RemteTempPath C:\TempFlder -PrductType DcAve The detailed infrmatin f the parameters is listed belw: Parameter Type Descriptin -TargetName Required The name r IP address f the destinatin machine where yu want t install the DcAve Agent. *Nte: If the hstname is used, ensure that the specified cmputer name can be reslved thrugh the lcal Hsts file, by using Dmain Name System (DNS) queries, r thrugh NetBIOS name reslutin techniques. -Username Required The username f the user used t access the destinatin machine where yu want t install the DcAve Agent. The frmat f the username is: dmain\username. The permissins f the user specified here are as fllws: If the specified user is the lcal administratr f the destinatin machine, it can be used directly. Enter.\administratr fr the Username parameter. If the specified user is frm the dmain which the destinatin machine belngs t, the dmain user must be added t the Administratrs grup n the destinatin machine. The user specified here must have the Full Cntrl permissin t the path specified in 62

Parameter Type Descriptin RemteTempPath parameter. -Passwrd Required The passwrd f the user specified abve. Qute the passwrd if it cntains any special character r space. -PackageFilesFlder Required The lcal path n the machine where yu run the cmmand. The specified path stres the unzipped DcAve Agent installatin package (Agent ZIP file). The frmat f the path is: C:\package. Qute the path if it cntains any special character r space. -AnswerFilePath Required The lcal path where yu saved the Answer file. The path must be detailed t the name f the Answer file. Fr example, C:\AnswerFile.xml. -RemteTempPath Required A lcal path n the destinatin machine that the DcAve Agent is installed t. The frmat f the path is: C:\temp. The path will be used t stre the temprary files generated during the DcAve Agent unattended installatin. The temprary files will be deleted as sn as the unattended installatin finishes. -Lg Optinal This is an ptinal parameter. If used, the lgs f the unattended installatin will be saved t the.txt file in the specified path. The path specified in this parameter must be detailed t the name f the lg file. Fr example, C:\Lg.txt. - UseIPv6frCmmunicatin Optinal If the specified lg file des nt exist, it will be generated autmatically. This is an ptinal parameter. It specifies the cmmunicatin methd between the machine where the cmmand is run and the destinatin machine that the DcAve Agent is installed t. If an IPv6 address is entered in TargetName parameter, this parameter must be entered. 63

Parameter Type Descriptin *Nte: When using this parameter, bth the destinatin machine and the machine where yu run this cmmand must supprt IPv6. -PrductType Required This parameter is used t identify the prduct yu are installing frm ther AvePint s prducts. -ServerCre Required when the destinatin is Windws Server 2008 R2 Server Cre r Windws Server 2012 Server Cre Enter DcAve as the value f this parameter when yu install DcAve prducts. This parameter is nly required when yu install DcAve Agent t Windws Server 2008 Server Cre r Windws Server 2012 Server Cre envirnment. The value f this parameter must be set t true. Getting Cnfiguratin Infrmatin Cmmand The Get-DAAgentCnfigInf cmmand enables yu t remtely get the cnfiguratin infrmatin f DcAve Agent. Yu can nt nly get the cnfiguratin infrmatin f the Agents installed remtely thrugh the use f Unattended Installatin, but als can get the cnfiguratin infrmatin f the Agents installed lcally thrugh the use f installatin wizard. In a wrd, yu are able t remtely get the cnfiguratin infrmatin f any Agents. *Nte: The Get-DAAgentCnfigInf cmmand is nt available when the destinatin machine uses Windws Server 2008 R2 Server Cre r Windws Server 2012 Server Cre Operating System. Belw is an example f the Get-DAAgentCnfigInf cmmand: Get-DAAgentCnfigInf -TargetName 10.0.0.1 -Username AvePint\DcAve -Passwrd Ave - PrductType DcAve This table cntains detailed infrmatin fr each f the parameters: Parameter Type Descriptin -TargetName Required The name r IP address f the destinatin machine where has DcAve Agent installed. *Nte: If the hstname is used, ensure that the specified cmputer name can be reslved thrugh the lcal Hsts file, by using Dmain Name System (DNS) queries, r thrugh NetBIOS name reslutin techniques. 64

Parameter Type Descriptin -Username Required The username f the user used t access the destinatin machine where has DcAve Agent installed. The frmat f the username is: dmain\username. The permissins f the user specified here are as fllws: If the specified user is the lcal administratr f the destinatin machine, it can be used directly. Enter.\administratr fr the Username parameter. If the specified user is frm the dmain which the destinatin machine belngs t, the dmain user must be added t the Administratrs grup n the destinatin machine. The user specified here must have the Full Cntrl permissin t the path specified in RemteTempPath parameter. -Passwrd Required The passwrd f the user specified abve. Qute the passwrd if it cntains any special character r space. -Lg Optinal This is an ptinal parameter. If used, the lgs f getting cnfiguratin infrmatin will be saved t the.txt file in the specified path. The generated lg file is a text file. The path specified in this parameter must be detailed t the name f the lg file. Fr example, C:\Lg.txt. If the specified lg file des nt exist, it will be generated autmatically. -AnswerFilePath Optinal This is an ptinal parameter. If used, the cnfiguratin infrmatin yu get by the Get-DAAgentCnfigInf cmmand will be exprted t the.xml file in the specified path. Only the.xml file is supprted by this parameter. The cntent frmat f the generated.xml file is the same as the Agent Answer File. The path specified in this parameter must be detailed t the name f the lg file. Fr example, C:\ManagerCnfigInfr.xml. There must be n.xml file with the same name existing in the specified path. 65

Parameter Type Descriptin -PrductType Required This parameter is used t identify the prduct yu are installing frm ther AvePint s prducts. -ServerCre Required when the destinatin is Windws Server 2008 R2 Server Cre r Windws Server 2012 Server Cre Enter DcAve as the value f this parameter when yu install DcAve prducts. This parameter is nly required when yu install DcAve Agent t Windws Server 2008 Server Cre r Windws Server 2012 Server Cre envirnment. The value f this parameter must be set t true. Cnfiguring Cnfiguratin Infrmatin Cmmand The Cnfig-DAAgentCnfigInf cmmand enables yu t remtely mdify the cnfiguratin infrmatin f DcAve Agent. Yu can nt nly mdify the cnfiguratin infrmatin f the Agents installed remtely thrugh the use f Unattended Installatin, but als can mdify the cnfiguratin infrmatin f the Agents installed lcally thrugh the use f installatin wizard. In a wrd, yu are able t remtely mdify the cnfiguratin infrmatin f any Agents. *Nte: The Cnfig-DAAgentCnfigInf cmmand is nt available when the destinatin machine uses Windws Server 2008 R2 Server Cre r Windws Server 2012 Server Cre Operating System. Belw is an example f the Cnfig-DAAgentCnfigInf cmmand: Cnfig-DAAgentCnfigInf -TargetName 10.0.0.1 -Username AvePint\DcAve -Passwrd Ave - CntrlServiceHst 10.0.0.2 -CntrlServicePrt 15000 -AgentAddress 10.0.0.1 This table cntains detailed infrmatin fr each f the parameters: Parameter Type Descriptin -TargetName Required The name r IP address f the destinatin machine where has DcAve Agent installed. *Nte: If the hstname is used, ensure that the specified cmputer name can be reslved thrugh the lcal Hsts file, by using Dmain Name System (DNS) queries, r thrugh NetBIOS name reslutin techniques. -Username Required The username f the user used t access the destinatin machine where has DcAve Agent installed. The frmat f the username is: dmain\username. 66

Parameter Type Descriptin The permissins f the user specified here are as fllws: If the specified user is the lcal administratr f the destinatin machine, it can be used directly. Enter.\administratr fr the Username parameter. If the specified user is frm the dmain which the destinatin machine belngs t, the dmain user must be added t the Administratrs grup n the destinatin machine. The user specified here must have the Full Cntrl permissin t the path specified in RemteTempPath parameter. -Passwrd Required The passwrd f the user specified abve. Qute the passwrd if it cntains any special character r space. -CntrlServiceHst Optinal If the hst name r IP address f the Cntrl Service that cnnects the Agent installed n the destinatin machine is changed, use this parameter t change the hst name r IP address f the Cntrl Service t the new ne. -CntrlServicePrt Optinal If the prt f the Cntrl Service that cnnects the Agent installed n the destinatin machine is changed, use this parameter t change the prt f the Cntrl Service t the new ne. -AgentAddress Optinal If the hst name r IP address f the destinatin server that has Agent installed is changed, use this parameter t change the hst name r IP address f the Agent t the new ne. -AgentPrt Optinal The new Agent prt yu want t use fr the DcAve Agent installed n the destinatin machine. -DcAvePassphrase Optinal If the passphrase f the DcAve Manager that the Agent installed n the destinatin machine cnnects is changed, use this parameter t change the passphrase t the new ne. -Lg Optinal This is an ptinal parameter. If used, the lgs f cnfiguring cnfiguratin infrmatin will be saved t the.txt file in the specified path. The generated lg file is a text file. The path specified in this parameter must be detailed t the name f the lg file. Fr example, C:\Lg.txt. 67

Parameter Type Descriptin If the specified lg file des nt exist, it will be generated autmatically. -PrductType Required This parameter is used t identify the prduct yu are installing frm ther AvePint s prducts. -ServerCre Required when the destinatin is Windws Server 2008 R2 Server Cre r Windws Server 2012 Server Cre Enter DcAve as the value f this parameter when yu install DcAve prducts. This parameter is nly required when yu install DcAve Agent t Windws Server 2008 Server Cre r Windws Server 2012 Server Cre envirnment. The value f this parameter must be set t true. 68

Verifying Cnfiguratin Infrmatin Cmmand The Verify-DAAgentCnfigInf cmmand enables yu t remtely verify the cnfiguratin infrmatin yu want t use fr DcAve Agent is valid r nt. Yu can nt nly verify the cnfiguratin infrmatin fr the Agents installed remtely thrugh the use f Unattended Installatin, but als can mdify the cnfiguratin infrmatin fr the Agents installed lcally thrugh the use f installatin wizard. In a wrd, yu are able t remtely verify the cnfiguratin infrmatin fr any Agents. *Nte: The Verify-DAAgentCnfigInf cmmand is nt available when the destinatin machine uses Windws Server 2008 R2 Server Cre and Windws Server 2012 Server Cre Operating Systems. Belw is an example f the Verify-DAAgentCnfigInf cmmand: Verify -DAAgentCnfigInf -TargetName 10.0.0.1 -Username AvePint\DcAve -Passwrd Ave - CntrlServiceHst 10.0.0.2 -CntrlServicePrt 15000 -AgentAddress 10.0.0.1 This table cntains detailed infrmatin fr each f the parameters: Parameter Type Descriptin -TargetName Required The name r IP address f the destinatin machine where has DcAve Agent installed. *Nte: If the hstname is used, ensure that the specified cmputer name can be reslved thrugh the lcal Hsts file, by using Dmain Name System (DNS) queries, r thrugh NetBIOS name reslutin techniques. -Username Required The username f the user used t access the destinatin machine where has DcAve Agent installed. The frmat f the username is: dmain\username. The permissins f the user specified here are as fllws: If the specified user is the lcal administratr f the destinatin machine, it can be used directly. Enter.\administratr fr the Username parameter. If the specified user is frm the dmain which the destinatin machine belngs t, the dmain user must be added t the Administratrs grup n the destinatin machine. The user specified here must have the Full Cntrl permissin t the path specified in RemteTempPath parameter. -Passwrd Required The passwrd f the user specified abve. 69

Parameter Type Descriptin Qute the passwrd if it cntains any special character r space. - CntrlServiceHst Optinal Verifying the hst name r IP address f the Cntrl Service that yu want the Agent installed n the destinatin machine t cnnect. -CntrlServicePrt Optinal Verifying the prt f the Cntrl Service that yu want the Agent installed n the destinatin machine t cnnect. -AgentAddress Optinal Verifying the hst name r IP address that yu want t use fr the Agent installed n the destinatin machine. -AgentPrt Optinal Verifying the prt that yu want t use fr the Agent installed n the destinatin machine. -Passphrase Optinal Verifying the Manager passphrase that yu want t use fr the Agent installed n the destinatin machine. -Lg Optinal This is an ptinal parameter. If used, the lgs f verifying cnfiguratin infrmatin will be saved t the.txt file in the specified path. The generated lg file is a text file. The path specified in this parameter must be detailed t the name f the lg file. Fr example, C:\Lg.txt. If the specified lg file des nt exist, it will be generated autmatically. -PrductType Required This parameter is used t identify the prduct yu are installing frm ther AvePint s prducts. -ServerCre Required when the destinatin is Windws Server 2008 R2 Server Cre r Windws Server 2012 Server Cre Enter DcAve as the value f this parameter when yu install DcAve prducts. This parameter is nly required when yu install DcAve Agent t Windws Server 2008 Server Cre r Windws Server 2012 Server Cre envirnment. The value f this parameter must be set t true. 70

Helpful Ntes fr DcAve Unattended Installatin t Windws XP Operating System Cnnecting t the remte envirnment with the Windws XP perating system is refused when executing DcAve unattended installatin. The slutin strategy t this issue is: Navigate t the remte server where yu want t perfrm the unattended installatin, and set the cnfiguratins accrding t the steps belw: 1. Navigate t Start > Cntrl Panel > Administrative Tls. 2. Click Lcal Security Plicy t access t the Lcal Security Settings interface. 3. Expand the Lcal Plicies nde, and select Security Optins. 4. Select Netwrk access: Sharing and security mdel fr lcal accunts. Set its value as Classiclcal users authenticate as themselves. Figure 1: The Lcal Security Settings interface. After the cnfiguratin abve, yu can try t remtely run the unattended installatin jb n the envirnment with Windws XP perating system. 71

Accessing the DcAve GUI Fllwing are the supprted brwsers and the requirement n the Silverlight versin if yu want t access DcAve GUI in Windws Server 2008 R2 Enterprise SP1 envirnment. Silverlight Versin Internet Explrer Rules 5.0 r abve IE 7 r abve Requirements Ggle Chrme 19.0.1084.52 Mzilla Firefx 14.0.1 DcAve Manager 6 is able t be accessed in the envirnment cnfigured t USGCB (United States Gvernment Cnfiguratin Baseline) security standards. Please visit the website http://usgcb.nist.gv/usgcb/micrsft_cntent.html fr mre infrmatin n USGCB. Internet Explrer Setup When first accessing DcAve using Micrsft Internet Explrer (IE), certain initial security settings must be cnfigured. Run DcAve s server applicatin fund in the start menu n the machine running the DcAve Cntrl Service, and fllw the steps belw. 1. When yu access DcAve by IE, the Brwser will display a security certificate prmpt: Select the ptin Cntinue t this website listed by the red bullet. 2. Click the Security Reprt icn next t the address URL. 72

3. Click View certificates in the pp-up. The Certificate windw appears. 4. Click Install Certificate buttn t install DcAve certificate. The name f this certificate is the same as the hstname f the server that has DcAve Cntrl Service installed. 73

5. Click Next t cntinue with the Certificate Imprt. 6. Select the Place all certificates in the fllwing stre ptin and click Brwse t brwse t Trusted Rt Certificatin Authrities flder. Click OK t cnfirm the selectin and click Next. 7. Click Finish t cmplete the certificate imprt. 8. Click OK in the prmpt acknwledging the successful imprt. 9. Select temprarily allw ppping up the DcAve GUI r always allw in the security prmpt. Nw yu can lg int DcAve frm Internet Explrer. Lgging In t DcAve The DcAve GUI can be launched frm web brwsers within the same netwrk as the DcAve Manager. Refer t Accessing the DcAve GUI sectin fr the supprted web brwsers. Cnnect t the interface using the IP/Hstname fr the DcAve Manager - Cntrl Service, as well as the Cntrl Service Prt if it was changed. 1. Open an Internet Explrer windw and enter: https://<machine>:14000 74

Where <machine> is the hstname r IP address f the machine running the DcAve Cntrl Service. If the default prt number has been changed frm 14000, enter the new prt number. *Nte: If the hstname f the machine running the DcAve Cntrl Service cntains the underline (_), use the IP address f the crrespnding machine t access DcAve. 2. The DcAve lgin screen pps up. Select Lcal System and enter the default lgin accunt infrmatin: Lgin ID: admin Passwrd: admin Click Lgin. *Nte: When yu lg n DcAve fr the first time, it is strngly recmmended backing up the DcAve security keys fr prtectin. Fr mre infrmatin, refer t the DcAve 6 Cntrl Panel Reference Guide. Yu can als lg n DcAve using the integratin with ther authenticatin methds. Fr mre infrmatin, refer t the DcAve 6 Cntrl Panel Reference Guide. Out-f-Brwser Accessing DcAve Manager DcAve Manager can be installed as a shrtcut n the lcal machine when remtely accessing the DcAve Manager, allwing yu t duble-click the shrtcut rather than using the URL. Fllw the instructins belw t perfrm Out-f-Brwser (OOB) installatin. 1. On the machine where yu want t perfrm OOB installatin, add a mapping fr the IP address f the machine where yur DcAve Manager is installed. Fr example, if yu use the DcAve build-in certificate which uses the same name as the hstname f the machine where the DcAve Manager is installed, add the mapping as fllws: 75

*Nte: If yur DcAve 6 is upgraded frm DcAve 6 GA, yu must add the mapping fr the IP address f the machine where yur DcAve Manager installed. 2. Use the URL with the certificate t access DcAve Manager: https://hstname:14000/index.htm *Nte: If yur DcAve 6 is upgraded frm DcAve 6 GA, the URL with the mapped certificate is as fllws: https://dcave:14000/index.htm Since the DcAve build-in certificate is nt CA-certified, yu must install it t access DcAve Manager. Refer t the Internet Explrer Setup sectin fr mre infrmatin n installing the DcAve certificate. 3. After the DcAve certificate is installed successfully, lgin DcAve Manager and right-click n DcAve Manager GUI. Select Install DcAve 6 nt this cmputer 4. Click Install in the pp-up windw t install the DcAve Manager shrtcut n the desktp f the lcal machine. Nw yu can remtely access DcAve Manager by duble-clicking the shrtcut rather than using the URL. 76

DcAve Manager and Agent Maintenance Using the DcAve Manager/Agent Cnfiguratin Tl If yu want t mdify the cnfiguratin f DcAve Manager/Agent after the installatin, pen the Start Menu in Windws n the DcAve Manager server, and navigate t All Prgrams > AvePint DcAve 6. Then pen the DcAve 6 Manager Tls/DcAve 6 Agent Tls flder. Click Manager Cnfiguratin Tl/Agent Cnfiguratin Tl. Click n the items listed n the left part f the tl and yu can mdify the crrespnding settings. Refer t sectins Installing the DcAve Manager and Installing the DcAve Agents fr the detailed infrmatin f the settings. *Nte: If the database type is MS SQL, yu can change the Cntrl database/auditr database/reprt database t anther existing Cntrl database/auditr database/reprt database using DcAve Manager Cnfiguratin Tl. Mrever, the passphrase is required t be entered if yu chse t change the Cntrl database t anther existing Cntrl database. The Manager Cnfiguratin Tl des nt supprt the data transfrmatin. If yu want t use the data in the frmer database, it is recmmended that yu back up the data t the server (yu wish t use), and cnnect the specified server with the transferred database using the Manager Cnfiguratin Tl. Using the DcAve Manager/Agent Restart Service Tl If yu want t restart the service(s) f DcAve Manager/Agent after the installatin, pen the Start Menu in Windws n the DcAve Manager server and navigate t All Prgrams > AvePint DcAve 6. Then pen the DcAve 6 Manager Tls/DcAve 6 Agent Tls flder. Click Manager Restart Service Tl/Agent Restart Service Tl. Yu can check the status f the service(s) in the tl interface. Select ne service frm the tl interface and yu can perfrm the fllwing actins. Start Start the selected service(s) which has been stpped. Stp Stp the selected service(s). Restart Restart the selected service(s). Using the DcAve Manager/Agent Uninstallatin Wizard Yu can use either f the tw methds belw t access the uninstallatin wizard f DcAve Manager/Agent after the Manager/Agent has been installed. In rder t cmplete the change/repair peratins successfully, the Uninstallatin Wizard must be run by a lcal administratr. 77

Methd 1 Duble click the Setup.exe file in the unpacked DcAve Manager/Agent directry and run it. *Nte: This is the recmmended methd since it makes the mst use f the installatin package. Methd 2 Open the Start Menu in Windws n the DcAve Manager/Agent server and navigate t All Prgrams > AvePint DcAve 6. Open DcAve 6 Manager Tls/DcAve 6 Agent Tls flder. Click Manager Uninstall/Agent Uninstall. Nw yu can perfrm the peratins intrduced in the fllwing tw sectins. Change the Manager Installatin Yu can install/uninstall the specified Manager service(s) by selecting the Change ptin in the DcAve Manager uninstallatin wizard. This ptin is very useful when yu want t add new service(s) nt the server r remve existing service(s) frm the server. After the Installatin Rule Scanning, yu will then be guided thrugh the installatin/uninstallatin f the selected Manager service(s). Repair the Manager/Agent Installatin Yu can try t repair the DcAve Manager/Agent files after they have been crrupted. Select the Repair ptin in the DcAve Manager/Agent uninstallatin wizard, and DcAve will try t repair the crrupted files. Hwever, there are sme limitatins t the Repair functin. If sme crucial files have been lst r crrupted, the DcAve installatin cannt be repaired. If yu have cleared the temprary files after the first installatin, yu can nly perfrm the repair using Methd 1. If the register key HKEY_LOCAL_MACHINE > SOFTWARE > Micrsft > Windws > CurrentVersin > Uninstall > DcAve6Manager is crrupt, the repair functin cannt be used in this case. Yu must use Methd 1 t perfrm a new installatin f DcAve. 78

Uninstalling DcAve The DcAve Uninstallatin Wizard is there t guide yu thrugh this uninstallatin prcess. By fllwing the steps belw, yu will have DcAve remved frm yur envirnment very quickly. In rder t cmplete the uninstallatin successfully, the Uninstallatin Wizard must be run by a lcal administratr. Uninstalling DcAve Manager In rder t uninstall DcAve Manager, please ensure the manager service being remved is nt in use by anther prcess. Uninstalling DcAve Manager frm Cmmn Envirnments If yur DcAve Manager is installed n the fllwing cmmn Windws envirnments: Windws Server 2003 Windws Server 2003 R2 Windws Server 2008 Windws Server 2008 R2 Windws XP Windws Vista Windws 7 Windws 8 Windws Server 2012 Fllw the steps belw t uninstall DcAve Manager. 1. Open the Start Menu in Windws n the DcAve Manager server, and navigate t All Prgrams > AvePint DcAve 6. 2. Open DcAve 6 Manager Tls flder. Click Manager Uninstall. 3. Select the Remve ptin. Click Next. 4. In Ready t Remve DcAve 6 Manager page, cnfigure the fllwing ptin. Remve cnfiguratin file Select this ptin if yu want t remve all the flders and cnfiguratin files generated by the DcAve 6 Manager installatin. *Nte: The Lgs flder will nt be remved n matter yu select Remve cnfiguratin file ptin r nt. If yu will want t use the Cntrl database later, yu first back up the passphrase by ging t Cntrl Panel > System Optin > Security Infrmatin > Manager Passphrase. 79

Click Remve t start the Manager uninstallatin prcess. If the applicatin pl created by DcAve Manager installatin is still useful, it will nt be deleted during the Manager uninstallatin. If the applicatin pl created by DcAve Manager installatin is nt used by any ther applicatins, it will be deleted during the Manager uninstallatin. If yu use Built-in database, yu will be asked whether t delete the Built-in database while uninstalling DcAve Manager. If yu use SQL Server, the Manager uninstallatin will nt delete the Manager databases. 5. Click Finish t cmplete the uninstallatin. *Nte: Once the uninstallatin is in prgress, it cannt be cancelled and the uninstallatin interface cannt be clsed. Uninstalling DcAve Manager frm Windws Server 2008 R2 Server Cre r Windws Server 2012 Server Cre Fllw the steps belw t uninstall DcAve Manager frm Windws Server 2008 R2 Server Cre envirnment. 1. Change the directry t the unzipped DcAve Manager installatin package in Cmmand Line interface. 2. Enter the fllwing cmmand and press Enter t start the DcAve Manager uninstallatin prcess. Setup.exe Uninstall-DcAveManager -RemveCnfiguratinFile The parameter -RemveCnfiguratinFile is ptinal. If yu add the remve cnfigure file parameter after the cmmand, all the flders and the cnfiguratin files generated by DcAve Manager installatin will be remved after the uninstallatin cmpletes. *Nte: Remve cnfiguratin file des nt remve the Lgs flder. *Nte: If the applicatin pl created by DcAve Manager installatin is nt used by any ther applicatins, it will be deleted during the Manager uninstallatin. *Nte: The Manager uninstallatin will nt delete the Manager databases frm SQL Server. 80

Uninstalling DcAve Agent In rder t uninstall DcAve Agent, please ensure there are n current jbs running n the agent. Uninstalling DcAve Agent frm Cmmn Envirnments If yur DcAve Agent is installed n the fllwing cmmn Windws envirnments: Windws Server 2003 Windws Server 2003 R2 Windws Server 2008 Windws Server 2008 R2 Windws XP Windws Vista Windws 7 Windws 8 Windws Server 2012 Fllw the steps belw t uninstall DcAve Agent. 1. Open the Start Menu in Windws n the DcAve Agent server, and navigate t All Prgrams > AvePint DcAve 6. 2. Open DcAve 6 Agent Tls flder. Click Agent Uninstall. 3. Select the Remve ptin. Click Next. 4. In Ready t Remve DcAve 6 Agent page, cnfigure the fllwing ptins. Disable EBS/RBS settings in SharePint farm Select this ptin t disable the EBS/RBS settings in the SharePint farm. If the EBS/RBS settings are disabled, the Strage Optimizatin stubs cannt be accessed. This ptin is selected by default. Uncheck this ptin if yu want t reinstall the DcAve 6 Agent later. Remve cnfiguratin file Select this ptin if yu want t remve all the flders and cnfiguratin files generated by the DcAve 6 Agent installatin. *Nte: The Lgs flder will nt be remved n matter yu select Remve cnfiguratin file ptin r nt. Click Remve and the Agent uninstallatin prcess starts. 5. Click Finish t cmplete the uninstallatin. *Nte: Once the uninstallatin is in prgress, it cannt be cancelled and the uninstallatin interface cannt be clsed. 81

Uninstalling DcAve Agent frm Windws Server 2008 R2 Server Cre r Windws Server 2012 Server Cre Fllw the steps belw t uninstall DcAve Agent frm Windws Server 2008 R2 Server Cre envirnment. 1. Change the directry t the unzipped DcAve Agent installatin package in Cmmand Line interface. 2. Enter the fllwing cmmand and press Enter t start the DcAve Agent uninstallatin prcess: Setup.exe Uninstall-DcAveAgent -RemveCnfiguratinFile -IsCheckDisableEBSRBS -RemveCnfiguratinFile and -IsCheckDisableEBSRBS are ptinal parameters. If yu nly use the cmmand withut any parameter appended, the EBS/RBS settings in the SharePint farm are disabled, and the Strage Optimizatin stubs cannt be accessed. Als all the flders and cnfiguratin files generated by the DcAve 6 Agent installatin will nt be remved after the uninstallatin cmpletes. Adding the parameter-remvecnfiguratinfile after the cmmand, all the flders and cnfiguratin files generated by the DcAve 6 Agent installatin will be remved after the uninstallatin cmpletes. Adding the parameter -IsCheckDisableEBSRBS after the cmmand, the EBS/RBS settings in the SharePint farm are nt disabled during the uninstallatin. 82

Advanced Cnfiguratin Mdify the Prt Used by DcAve Strage Manager and Cnnectr On a specified DcAve Agent server, if the default prt (14005) used by DcAve Strage Manager and Cnnectr is ccupied, yu can use the cnfiguratin file belw t mdify the prt. \AvePint\DcAve6\Agent\data\SP2010\Arch\AgentCmmnStrageEnv.cfg The detailed steps are as fllws. 1. Navigate t the installatin path f the specified DcAve Agent, which is \AvePint\DcAve6\Agent\data\SP2010\Arch by default. 2. Find the AgentCmmnStrageEnv.cfg file and pen it with Ntepad. 3. Mdify the value f StrageServicePrt t an available prt. 4. Save the cnfiguratin file. 5. Click Start and find the Cmmand Prmpt. 6. Right click n it and click Run as administratr. 7. Enter iisreset in the ppup Cmmand Prmpt, and press Enter t restart IIS. 8. Restart the DcAve Agent service. Fr mre infrmatin, refer t Use the DcAve Manager/Agent Restart Service Tl sectin. Mdify the Prt Used by DcAve Replicatr On a specified DcAve Agent server, if the default prt (14006) used by DcAve Replicatr is ccupied, yu can use the cnfiguratin file belw t mdify the prt. \AvePint\DcAve6\Agent\data\SP2010\Replicatr\SP2010Replicatr.xml The detailed steps are as fllws. 1. Navigate t the installatin path f the specified DcAve Agent, which is \AvePint\DcAve6\Agent\data\SP2010\Replicatr by default. 2. Find the SP2010Replicatr.xml file, and pen it with Ntepad. 3. Mdify the value f ListenerPrt t an available prt. 4. Save the cnfiguratin file. 5. Click Start, and find the Cmmand Prmpt. 83

6. Right click n it and click Run as administratr. 7. Enter iisreset in the pp-up Cmmand Prmpt and press Enter t restart IIS. 8. Restart the DcAve Agent service. Fr mre infrmatin, refer t Use the DcAve Manager/Agent Restart Service Tl sectin. 84

Helpful Ntes Issue Displaying Installed DcAve Agents in the Manager Interface If bth hstname and IP address are used t cnfigure the Database server when installing SharePint n the Web frnt-end servers, the DcAve agents installed n the Web frnt-end servers may nt be displayed in DcAve 6 > Cntrl Panel > System Settings > Mnitr > Agent Mnitr. After the DcAve Agents have been installed n the Web frnt-end servers successfully, refer t the detailed steps belw t reslve this issue. 1. Remtely lg n ne Agent server which is displayed crrectly in the Manager Interface. 2. Navigate t the installatin path f DcAve Agent, by default it is C:\Prgram Files\AvePint\DcAve6\Agent\bin. 3. Find the cnfiguratin file named AgentCmmnVCEnv.cnfig. 4. Cpy the AgentCmmnVCEnv.cnfig file and save it t a lcal path. 85