Eastron (Metering) Europe Limited 3rd Floor, 207 Regent Street, London W1B 3HH Customer Service: 0203 758 3494 www.eastroneurope.com SmartConnect Automatic Meter Reading System Sigfox Enabled MID Certified CT Operated Single/ Three Phase Power Meter Minimal Data Charges Pre-Wired Ip65 Enclosure Simple & Easy installation Utilizes RS485 serial connection (Not Pulse) Emig Software Platform Multifunction Parameters What is SmartConnect? SmartConnect is an automatic meter reading system that is a complete end to end solution, from electricity meter, Sigfox AMR, Software and connectivity all packed in a pre-wired enclosure. We have removed the need for onsite commissioning and complicated installation processes. It is as simple as connecting the mains to the box and then turning on the power, the data will then come through immediately. We have moved away from traditional GPRS SIM based technologies and developed devices that will communicate on the Sigfox network. This reduces the hardware cost and data costs considerably, which allow us to offer a competitive end to end solution.
SMART SmartConnect DIN-RAIL METER SMARTRAIL-SDL DINRAIL RS485 DATALOGGER RS485 A B Wirelss Data Transfer SIGFOX Network Connectivity Up to 3 Inputs Available Remote Monitoring Solutions Minimal Data Charges No Software/ Licence Fees 3 4 POWER DATA ONLINE OFFLINE SMARTPANEL SMARTPANEL 5 6 7 1 2 What is SIGFOX? SIGFOX provides a cellular style network operator that provides a tailor-made solution for low-throughput Internet of Things and M2M applications. For a host of applications from smart meters to control nodes that need connectivity over long ranges the only option until recently has been to use a cellular connection. This option has several disadvantages because cellular phone systems are focussed on voice and high data rates. They are not suited to low data rate connections as the radio interface is complex and this adds cost and power consumption - too much for most M2M / IoT applications. The SIGFOX network is aimed at providing connectivity for a variety of applications and users. It is not aimed at one area, but at being for general use by a variety of different types of users. The SIGFOX network performance is characterised by the following: Up to 140 messages per object per day Payload size for each message is 12 bytes Wireless throughput up to 100 bits per second We have partnered with PAD technology and their emig platform. This is an online tool for remotely measuring and monitoring the data from the SmartConnect product. emig can provide warnings via email and SMS messaging of system failures and abnormal events. emig records meter readings every half hour and makes them immediately available on-line - offering a powerful platform for managing metering and sub-metering for both domestic and commercial users. The emig platform now supports monitoring of import, export and generation for a property, giving customers the opportunity to maximise their use of generated electricity in an informed manner, or to make an informed claim on the export tariff. The SMARTRAIL-SDL Datalogger is a low-cost solution for remotely monitoring Smart Process digital power meters equipped with Modbus RS485 RTU. This devices utilizes the SIGFOX network to transfer data wirelessly from meter to the cloud. This data can be presented using our software, or if preferred, it can be provided in a raw format such as a CSV file allowing you to present the data through your own software. SIGFOX is a leading cellular network dedicated to low-bandwidth communications for connected devices. Its technology is particularly suited to connecting objects requiring a low-cost data transfer. This technology also eradicates the requirement for a SIM card. The SMARTRAIL-SDL is specifically designed to enable a simple, low cost, remote wireless management solution that does not require specialist technical skills for installation. The SMARTRAIL-SDL can take up to 3 parameter inputs through Modbus RS485 from the following list: Total Active Energy (Σ kwh) Import Active Energy (kwh) Export Active Energy (kwh) Current (A) Voltage (V) Instantaneous Power (kw) Power Factor (PF) (Hz) This can be 3 parameters from 1 meter, or 1 parameter per meter from 3 meters.
SMART SmartConnect DIN-RAIL METER Examples of Monitoring Setups Below are some examples of how the SMARTRAIL-SDL can be wired in conjunction with other meters to read parameters accordingly: 1 Electricity Meter - 3 Parameters Meter 1: Total Active Energy (Σ kwh) Meter 1: Import Active Energy (kwh) Meter 1: Export Active Energy (kwh) SDM630-MOD-MID V2 DIN RAIL MOUNTED MULTIFUNCTION POWER METER MID B+D Certified Multifunction 100A Direct Connected High Definition LCD backlit Display Built in Pulsed & RS485 RTU Modbus Outputs 230/400V AC 3 Electricity Meters - 1 Parameter Per Meter Meter 1: Total Active Energy (Σ kwh) Meter 2: Total Active Energy (Σ kwh) Meter 3: Total Active Energy (Σ kwh) Measured Inputs Voltage inputs through 4-way fixed connector with 25mm² stranded wire capacity. Single Phase Two Wire(1P2W), Three Phase Three Wire(3P3W) or Three Phase Four Wire (3P4W) unbalanced. Line frequency measured from L1 Voltage or L3 Voltage. Nominal Voltage Input 100-289V AC (Ph+N) or 173-500V AC (Ph+Ph) Max Continuous Voltage 120% of Nominal 1 Water Meter, 1 Heat Meter, Electricity Meter Nominal Input Current 0.5-10(100)A AC Max Continuous Current 120% of Nominal 50Hz ±10% Water Meter: 1 Pulsed Input Heat Meter: 1 Pulsed Input Power Meter: Total Active Energy (Σ kwh) Accuracy Voltage Current 0 5% of range maximum 0 5% of nominal 0 2% of mid-frequency Power Factor 1% of unity (0.01) Active Power (W) Specification Mounting DIN rail (DIN 43880) Sealing IP54 indoor Operating temperature -5 C to +65 C* Storage temperature -25 C to +75 C* Auxiliary Power Supply 230V AC (200-250V AC) Reactive Power (VAr) Apparent Power (VA) Active Energy (Wh) Class 1 IEC 62053-21 ReactiveEnergy (VARh) Total Harmonic Distortion 1% up to 31st harmonic Response time to step input 1s, typical, to >99% of final reading, at 50 Hz. Power Consumption Network 20mW SIGFOX Wiring Upload 15 Minutes Values Per Upload 3 45mm 1phase 2 Wire 3 Phase 3 Wire 3 Phase 4 Wire Comms Compatibility Modbus RS485 RTU Comms Baud Rate Pulsed Input Pulse Duration Pulse 1200, 2400, 4800, 9600 (auto-sensing) Volt-free 10mS minimum 50Hz maximum 72mm 35mm 100mm
SMART Smart DIN-RAIL Connect METER SDM230-MOD-MID V2 DIN RAIL MOUNTED MULTIFUNCTION POWER METER MID B+D Certified Multifunction 100A Direct Connected High Definition LCD backlit Display Built in Pulsed & RS485 RTU Modbus Outputs 4 Measurement Modes for Reading kwh Readings emig Platform PAD Technology Ltd and Smart Process and Control Ltd have partnered to bring to the market a comprehensive low cost automatic meter reading service using state of the art MID approved meters and Emig cloud based monitoring system. Emig 2.0 is our fully in house monitoring system. Nominated in the Solar Power Portal awards for product innovation the system uses a modern cloud based database to be efficient, agile and scalable. Measured Inputs Voltage inputs through 3-way fixed connector with 19mm² maximum terminal wire. Nominal Voltage Input Max Continuous Voltage Nominal Input Current Max Continuous Current Nominal Input Current Burden Accuracy Voltage Current (Ph+N) 176 to 276V 120% of nominal 0.5-10(100)A 120% of nominal 0.5VA 50Hz(±10%) 0 5% of range maximum 0 5% of nominal 0 2% of mid-frequency Emig 2.0 has been designed to allow new devices and data types to be added with ease. Emig 2.0 already supports and monitors many devices on a number of projects. All monitoring is fully combined and factory tested in our AC combiner boxes and G59/G100 control panels reducing time on site and maintaining high quality with a plug & play system. It is Secure and efficient data transfer via our trusted service providers to allow devices to send data securely via wireless networks. In addition to on-line monitoring, emig supports performance alerts for PV systems. Using email or SMS text messages, emig can give you warnings within 24 hours of system failure. Warnings allow you to spot loss of connectivity, potentially caused by site power failure, a circuit breaker that has tripped or communication problems. Power factor 1% of unity (0.01) Active power (W) Reactive power (VAr) Ordering Codes: Apparent power (VA) Active energy (Wh) Class 1 IEC 62053-21 Code Description Reactive energy (VARh) SmartConnect 1P-DR Prewired 100A Single Phase Direct Connected Meter c/w IP65 Enclosure & AMR Wiring SmartConnect 3P-DR Prewired 100A Three Phase Direct Connected Meter c/w IP65 Enclosure & AMR SmartConnect 1P-DR Encloure SmartConnect 3P-DR Encloure
Eastron (Metering) Europe Limited have opened Sales and Customer Support offices in the United Kingdom. Utilising the new high tech manufacturing facilities of Eastron Electronic Company Limited in China, combined with innovative UK design, we are providing our customers with streamlined support and supply of our extensive range of products in the UK and European markets. Our UK based team have 20 years experience in this industry and are able to provide expert support with all of our products technically. To name but a few, the advantages that Eastron Europe can offer are as follows: Full technical support based on a smaller time zone, with a difference of 2-3 hours compared to 7 hours in the far east Varied stock holding for quicker deliveries The ability to have face to face meetings with our clients Eastron Electronic Instruments Co LTD is one of the leading high-tech companies of electrical measurement instruments in China. We specialise in R&D, production and sales of smart meters and solutions. With advanced technologies of intelligent meter, we have developed many different products, with excellent performance, providing options for our clients. Our view on performance and quality, is extremely high! Eastron strictly follows ISO9001:2008 in operation, service and management of each sale. Eastron has obtained the MID (Measuring Instruments Directive) D from SGS for its production site. Eastron products had passed the European MID B, CE, ROHS 2.0 authentication and complied with relevant IEC, EN, and G/B standard. With high quality products and reliable services, Eastron has gained an impeccable reputation among clients and partners in more than 50 countries. As one of the most reliable suppliers of meters in China for high quality, competitive price and excellent after-sales services, Eastron provides not only the existing products and services, we can also design and provide the products and services requested by our customers. We are extremely proud of being favoured by our customers, for our meters and solutions, especially for din rail energy meters, Panel power meters, Current transformers, relay and timers and Management Systems etc. In addition, a sophisticated software mechanism is able to detect underperformance of your PV system, categorising problems into warning (slight underperformance), critical (major loss of generation in the last 24 hours) and zero generation. This mechanism compares each PV system with the 10 geographically closest systems, taking into account the system size (kw peak), the pitch and orientation of your solar modules and any shading (trees, telephone wires etc) on your PV installation. By comparing each system with others close by, weather conditions are accounted for by the performance software. This allows you to respond to changing system performance over time, whether you require technical support, or just need to arrange to have your solar modules cleaned. To meet the challenges of ever changing industry development, product design and manufacturing processes, are constantly being improved, which ensures that Eastron keep its competitive edge in the market. Our Mission To Create Value and Build Relationships with Our Partners. We strive to help our customer gain commercial advantage by consistently providing competitively-priced, high-quality products together with the best possible technical support. Moreover, we pride ourselves on focusing not only our customer s short-term requirements but also on the long-term needs of the marketplace. This drives us to give the best customer service within the industry and targets complete customer satisfaction. Eastron (Metering) Europe Limited 3rd Floor, 207 Regent Street, London, W1B 3HH Tel: 02037583494 Email: sales@eastroneurope.co.uk www.eastroneurope.com