JD Edwards EnterpriseOne 8.12 Standalone Client Installation Guide for the Oracle Application Server April 2006
JD Edwards EnterpriseOne 8.12 Standalone Client Installation Guide Copyright 2006, Oracle. All rights reserved. The Programs (which include both the software and documentation) contain proprietary information; they are provided under a license agreement containing restrictions on use and disclosure and are also protected by copyright, patent, and other intellectual and industrial property laws. Reverse engineering, disassembly, or decompilation of the Programs, except to the extent required to obtain interoperability with other independently created software or as specified by law, is prohibited. The information contained in this document is subject to change without notice. If you find any problems in the documentation, please report them to us in writing. This document is not warranted to be error-free. Except as may be expressly permitted in your license agreement for these Programs, no part of these Programs may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose. If the Programs are delivered to the United States Government or anyone licensing or using the Programs on behalf of the United States Government, the following notice is applicable: U.S. GOVERNMENT RIGHTS Programs, software, databases, and related documentation and technical data delivered to U.S. Government customers are commercial computer software or commercial technical data pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As such, use, duplication, disclosure, modification, and adaptation of the Programs, including documentation and technical data, shall be subject to the licensing restrictions set forth in the applicable Oracle license agreement, and, to the extent applicable, the additional rights set forth in FAR 52.227-19, Commercial Computer Software-- Restricted Rights (June 1987). Oracle Corporation, 500 Oracle Parkway, Redwood City, CA 94065. The Programs are not intended for use in any nuclear, aviation, mass transit, medical, or other inherently dangerous applications. It shall be the licensee's responsibility to take all appropriate fail-safe, backup, redundancy and other measures to ensure the safe use of such applications if the Programs are used for such purposes, and we disclaim liability for any damages caused by such use of the Programs. The Programs may provide links to Web sites and access to content, products, and services from third parties. Oracle is not responsible for the availability of, or any content provided on, third-party Web sites. You bear all risks associated with the use of such content. If you choose to purchase any products or services from a third party, the relationship is directly between you and the third party. Oracle is not responsible for: (a) the quality of third-party products or services; or (b) fulfilling any of the terms of the agreement with the third party, including delivery of products or services and warranty obligations related to purchased products or services. Oracle is not responsible for any loss or damage of any sort that you may incur from dealing with any third party. Oracle, JD Edwards, PeopleSoft, and Retek are registered trademarks of Oracle Corporation and/or its affiliates. Other names may be trademarks of their respective owners. Open Source Disclosure Oracle takes no responsibility for its use or distribution of any open source or shareware software or documentation and disclaims any and all liability or damages resulting from use of said software or documentation. The following open source software may be used in Oracle's PeopleSoft products and the following disclaimers are provided. This product includes software developed by the Apache Software Foundation (http://www.apache.org/). Copyright (c) 1999-2000 The Apache Software Foundation. All rights reserved. THIS SOFTWARE IS PROVIDED AS IS AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE APACHE SOFTWARE FOUNDATION OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Table of Contents Introduction... 1 Prerequisites... 2 Minimum Technical Requirements...2 Third-Party Software...2 Miscellaneous...2 Installing the JD Edwards EnterpriseOne 8.12 Standalone Client... 3 To Install the Standalone Client Base Components...3 To Install Standalone Client Data Components...7 Applying Required JDBC Drivers... 11 To install the JDBC drivers to the Client Workstation...11 Installing the JDK... 12 To install the JDK...12 Obtaining Software Protection Codes (SPC)... 14 To obtain Software Protection Codes (SPC)...14
Introduction This document includes these sections: Prerequisites Installing the JD Edwards EnterpriseOne 8.12 Standalone client Applying required JDBC Drivers Installing the required JDK Obtaining Software Protection Codes 4/26/06 1
Prerequisites Make sure your system meets the following requirements. Minimum Technical Requirements Before installing the JD Edwards EnterpriseOne 8.12 Standalone client, ensure the client workstation conforms to the published Minimum Technical Requirements (MTRs) for the JD Edwards EnterpriseOne 8.12 Development Client. Some of the MTRs that must be met before installing the JD Edwards EnterpriseOne 8.12 Standalone client are: Adobe Acrobat Reader 4.0 or higher Microsoft Data Access Components (MDAC) 2.71 Microsoft Visual Studio.Net 2003 MTRs can be found on the Oracle PeopleSoft Customer Connection website. Third-Party Software After installing the JD Edwards EnterpriseOne 8.12 Standalone client, you must install this third-party software: SQL Server 2000 Driver for JDBC SP2 or higher These drivers may be downloaded directly from Microsoft J2SE Software Development Kit (J2SE v 1.4.2_XX SDK) This JDK may be downloaded directly from Sun Microsystems. Miscellaneous Verify that all previous releases of JD Edwards EnterpriseOne have been completely uninstalled before installing the EnterpriseOne 8.12 Standalone client. 4/26/06 2
Installing the JD Edwards EnterpriseOne 8.12 Standalone Client Once your system meets the minimum requirements, complete these tasks to install the JD Edwards EnterpriseOne 8.12 Standalone client. To Install the Base Components of the Standalone Client 1. Launch InstallManager.exe from the root of DVD folder. 2. Click the link to EnterpriseOne 8.12 Standalone Base Components. 4/26/06 3
2. Click Next. 3. Highlight the appropriate language and click Next to accept the license agreement. 4/26/06 4
4. Select DEMO and click Next. 5. Select Development and click Finish. Note. There may be long periods during which the status bar does not change. This is a normal part of the installation process. 4/26/06 5
6. Click Next on the message regarding missing JDBC drivers. The required JDBC drivers will be applied manually after completing the installation of the Standalone Data Components. 7. Click Next on the message regarding the Java compiler installation. The required JDK will be installed manually after loading the Standalone Data Components. 4/26/06 6
10. Click OK to finish the installation of the JD Edwards EnterpriseOne 8.12 Standalone client Base Components. 11.Copy the jdbj.ini from BaseComponents\Client to this location: C:\E812\system\OC4J\j2ee\home\applications\webclient.ear\webclient\ WEB-INF\classes Note: If the jdbj.ini file already exists in the WEB-INF\classes directory, replace the existing file with the file in the BaseComponents \Client directory. To Install the Data Components of the Standalone Client 1. Launch InstallManager.exe from the root of the DVD. 4/26/06 7
2. Click the link to EnterpriseOne 8.12 Standalone Data Components. 3. Click Next. 4. Highlight the appropriate language and click Next to accept the license agreement. 4/26/06 8
5. Select DEMO and click Next. 6. Select Data and Solution Explorer and click Finish. 4/26/06 9
7. Click OK to finish the installation of the JD Edwards EnterpriseOne 8.12 Standalone Data Components. 4/26/06 10
Applying Required JDBC Drivers After installing the JD Edwards EnterpriseOne 8.12 Standalone client, install the appropriate JDBC driver to the client workstation: SQL Server 2000 Driver for JDBC SP2 or higher Note: Acquire the Microsoft JDBC Drivers directly from Microsoft. http://www.microsoft.com/downloads Check with Microsoft for licensing requirements. To install the JDBC drivers to the Client Workstation 1. On the client workstation, create a directory called \JDBC to use when downloading the required drivers. For example: C:\TEMP\JDBC 2. Download the JDBC drivers directly from Microsoft into the JDBC directory you created in the first step. The required drivers are: msbase.jar mssqlserver.jar msutil.jar 3. Copy the all the drivers from the JDBC directory you created in the first step into this directory: C:\E812\system\oc4j\j2ee\home\applib 4/26/06 11
Installing the Required JDK To use the Oracle Application Server with the Standalone Client, you must install the correct version of JDK in a defined directory on the client. To complete this task, obtain the required JDK from SUN Microsystems and copy this application to the client machine. To install the JDK 1. On the Standalone client, create a directory called \JDK under the JD Edwards EnterpriseOne system folder. C:\E812\system\JDK 2. Refer to the Minimum Technical Requirements (MTR) page to determine the correct JDK required for this installation. The MTRs can be accessed from Planet JD Edwards by navigating this path: Implement, Optimize and Upgrade ->Implementation Guide - >Supported Platforms ->JD Edwards EnterpriseOne (The required JDK is currently 1.4.2, but it can change with future updates.) 3. Navigate to the Sun Microsystems website: http://java.sun.com/j2se/1.4.2/download.html 4. On the displayed web page select the link Download J2SE SDK. 5. Select Accept and click Continue. 6. Select the link Windows Offline Installation, Multi-Language. 7. Click Save. 8. Navigate to a temporary directory on your local drive and click Save. The program downloads the JDK to the temporary directory. 9. From Microsoft Windows Explorer, navigate to the temporary directory and double click the executable program. 10. Click Next. 11. Select Accept and click Next. 4/26/06 12
12. Click Change, and select the \JDK directory you created in the first step. 13. Accept all other default values, and click Next. 14. Deselect both Browse Registration options. 15. Click Install. The installation process takes several minutes. 16. When the process is complete, click Finish. 4/26/06 13
Obtaining Software Protection Codes (SPC) Software Protection Codes enable JD Edwards EnterpriseOne customers to use standalone demonstration software. Complete this task to obtain the necessary SPC for the JD Edwards EnterpriseOne 8.12 Standalone client. To obtain Software Protection Codes (SPC) 1. Navigate to the Oracle PeopleSoft Customer Connection website: http://www.peoplesoft.com/corp/en/support/online_support/spc.jsp 2. On the displayed web page, locate the heading JD Edwards EnterpriseOne Standalone or Demonstration Software Protection Codes right-click the link 8.9,8.10,or 8.11 (ZIP:567K) and select "Save Target As..." to download the.zip file to a temporary directory. 3. Navigate to a temporary directory on your local drive and click Save. The program that will generate SPC for the Standalone client is saved to the temporary directory as a.zip file. 4. From Windows Explorer, navigate to the temporary directory and double click the.zip file to open it. 5. Double click the SetupOneWorldB9.exe to launch the Standalone SPC Update program. 4/26/06 14
6. Click Next. 7. Click Next. 4/26/06 15
8. Click OK. 9. Launch JD Edwards EnterpriseOne by double clicking activconsole.exe from C:\E812\system\bin32. NOTE. Allow sufficient time for all background processes to start before attempting to log in. Even though the login screen appears immediately, wait at least 30 seconds before signing in. Failure to do so may result in security server startup errors. 10. Login to the Standalone client with the user ID DEMO and the password DEMO. 4/26/06 16
11. Click OK on the Security Violation message. 12. Click the Get Auth Form Exit button to populate the authorization code fields and complete the JD Edwards EnterpriseOne Standalone client install. 4/26/06 17
13. Click OK to finish authorizing the client. 4/26/06 18