300W with separate power supply 200W Mono bloc CooLED series 100W Monobloc 50W with separate power supply 20W #HPL1600/300N, or E #HPL1600/200N, or E #HPL1600/100N, or E #HPL50/N, or E #HPL20N, or E N=with north America 3 wire plug, E=European 3 wire plug The CooLED series High power, single chip LED light is our Ultimate evolution on energy efficient digital imaging lights for Studio or on location projects. It can be plugged into wall socket from 110 to 220VAC, or use AC inverter to convert 12VDC to household AC Voltage, or to use our separate battery pack on CooLED50, or to use AC adapter on battery operated CooLED20. We have them all covered. Unlike flat panel LED, our CooLED is just like studio flash unit that can accomodate varieties of all different reflectors, softboxes, snoot, honeycomb grid, fresnel lens, optical snoot, etc., of course umbrella mount is built-in, except the portable version HPL20 with trade name CooLED 20 Except on CooLED20, all other CooLEDs have removeable diffuse glass domes, which are frosted to have better diffused light, or simply remove them for stronger point light, or just plug in our amber glass domes, transforming into a 3200K color temperature lights.
FRL2000/200N 200W LED spot light with 100mm Glass Fresnel lens FresLED 200 Self-contained, light weight, 200W single chip fresnel spot light with Bayonet front mount. Fits Bowens accessories. The FresLED is a state of art, new generation of studio spot light that is to replace the 2000W, bulky, extremely hot spot light. The 5200K color temperature delivers daylight quality, it emits out 9000 Lux of lights, runs whole day long. The focus rod enables to change the focus to enlarge or reduce the spot with ease. It has built-in dimmer. This is a basic model, simple to operate, use soft box to place infront of the spot light creates ideal light source thanks to its Bowens type bayonet mount. It can change spot circle from 50cm to 180cm in 1 meter range. The glass Fresnel lens can last for ever and is color corrected. Comes with barndoors. Size: 32x20x20cm Weight: 4.3kg The 4 leaf barndoor frame has magnetic strips for color gel. User can use any inexpansive color gel to put infront of the light. As the light is cold, it would not melt the gel happened on 2000 W halogen spot light. Mount: U bracket, can swing up for ceiling mount, or swing down to fit on 16mm stand spigot.
CooLED 20 HPL20N, E Type: Semiconductor single chip LED, 20W Fan: 1 30db (not noticeable 1 meter) Lumen: 200/m with fixed conical mirror 30d refector Total power consumption: 20W Voltage: 110-220VAC, adapter, 19.5VDC 4A output Battery: 12x1.5V alkaline, or 12x1.2V rechargable NiMH Degradation of lumen: 0.3% /50000 hours Casing: All metal, with push button tilting head Weight: 0.95 kg without batteries Mounts: flash shoe type, or 1/4-20 female thread with handle Standard accesssories: 2 leaf barndoor, diffuser, 3200K filter, AC adapter, handle. Batteries are not inlcuded. CooLED 100 HPL1600/100N, or E Type: Semiconductor single chip LED, 100W Lumen: 10000/m with conical mirror 40d refector Fan: 1, 38db/m Total power consumption:100w Voltage: 110-230VAC, fuse 3A Degradation of lumen: 0.3% /50000 hours Casing: All metal, with push button tilting head Power Cord: attached, 3m, 3 wire with in-line switch Weight: kg Mounts: bayonet type on reflector, 16mm receptacle on stand spigot, accepts umbrella Standard accesssories: 40 degrees conical, mirror type reflecto protective cap, sock diffuser, frosted glass dome, CooLED 300 HPL1600/300/110 or 220 Type: Semiconductor single chip LED, 300W Lumen: 27000/m with conical mirror 40d refector Total power consumption with power supply:400w Voltage: 120 or 220VAC, separate power supply DC voltage: 48VDC Degradation of lumen: 0.3% /30000 hours Casing: All metal, with push button tilting head Power Cord: 3 m from power supply Weight lamphead: kgs, power supply kg Mounts: bayonet type on reflector, 5/8 receptacle on stand spigot, accepts umbrella Standard accesssories: 40 degrees conical, mirror type reflector protective cap, frosted glass dome. Sock diffuser is not recommanded as unit will be overheated CooLED 50 HPL50N, or E Type: Semiconductor single chip LED, 50W Lumen: 5000m with conical mirror 40d refector, Bowen type mount Fan: 1, 32db (not noticeable 1meter) Total power consumption with power supply :60W Voltage: 24V-30VDC, comes with separtte 110-220V adapter, Degradation of lumen: 0.3% /50000 hours Casing: All metal Weight: 2 kg Mounts: bayonet type on reflector, 16mm receptacle on stand spigot, accepts umbrella Standard accesssories: 40 degrees conical, mirror type reflector 2 leaf barndoor, frosted glass dome, separate 110-220 AC adapter power supply Optional Twin battery pack for CooLED 50 : each pack holds 12 AA size 1.2V NiHM batteries, requires total 24 pcs. (not included) Part umber HPL50TBP HPL50BBP Li-ON single battery pack, 5000Ah. (with batteries) (available in Photokina 2014 CooLED 200 HPL1600/200N, or E Type: Semiconductor single chip LED, 200W Lumen: 16000/m with conical mirror 40d refector Fan: 2, 40db/m Total power consumption:200w Voltage: 110-220VAC, fuse 5ACoo Degradation of lumen: 0.3% /50000 hours Casing: All metal, with push button tilting head Power Cord: attached, 3m, 3 wire with in-line switch Weight: kg Mounts: bayonet type on reflector, 16mm receptacle on stand spigot, accepts umbrella Standard accesssories: 40 degrees conical, mirror type reflector protective cap, sock diffuser, frosted glass dome FresLED 200 FRL2000/200N, or E Type: Semiconductor single chip LED, 200W Lumen: 9000/m Spot diameter 1m: smallest 50cm, largest 180cm Total power consumption with power supply:200w Voltage: 110-220VAC, separate power supply DC voltage: 48VDC Degradation of lumen: 0.3% /30000 hours Casing: All metal Barndoors: includes 4 leaf barndoor, removable, with magnetic strip\ for color gels Power Cord: 3.5 m from power supply Weight lamphead: kgs, power supply kg Fresnel Lens: Glass, 100mm 16mm stand spigot, accepts umbrella
Model # HPL50K2N,E CooLED50 Cool daylight color Model #HPL50TBP (optional) Battery Pack for CooLED50 2500 NiHM batterie can last for 45 minutes minutes. Also 1.5V alkaline AA batteries also can power up the light in case NiHM is not available. The unit does not charge the batteries. Batteries need separate charger. #HPL500TBP mouts directly on top of lamp head. Each LED equals 500W incandescent light bulb. total 24 NiMH AA size batteries are needed (batteries are not included) HPL50K2 contains: 2 x 50W single chip LED lights in steel casing 2 x 90 d. detachable reflectors 4 x Barndoors 2 x Diffuser glass dome 2 x Power supply packs w/power cables. 2 x 10-1004J aluminum stand 1.8m 1 x Reflector protector 1 x Nylon Carry bag Technical specification Lumen of each LED (without glass dome) 1800/m Color Temperature 5200K +-200K CRI 80 Dimmer Yes Fan noise (non noticeable) 32db/m Electrical consumption 50W each Line Input voltage 110-220VAC Output regulated voltage 18.5VDC Rated hours usage 50,000 hrs Total weight 5kg HPL50BX Softbox with ring, 40cm x 40cm with internal diffuser Inside: white color HPL36T/W Optional softbox and umbrella 90cm diameter umbrella, translucent with removable silver/ black cover
Model # HPL20 CooLED20 Lamp head 2 leaf barndoor Photo quality hand held High Power LED Light, runs for 1 hour full power with 12 pcs. 1.2V 2500mA NiMh batteries Handle AC adapter Complete Set 3200K conversion filter Diffuser, pouch HPL20 contains: 1 x Single chip LED lamp head with fixed glass diffuser dome 1 x 2 leaf barndoor 1 x 3200K correction filter 1 x diffuser 1 x pouch for color filters 1 x detachable handle with 1/4 tripod receptacle at bottom 1 x A/C adapter for light (not charger) 1 x Fixed battery compartment for 12 pcs AA batteries Technical specification: Lumen 500/m CRI 85 Light angle 90 degrees Dimmer Yes Fan noise (non noticeable) 35db/m Color temperature 5200K +-200 Batteries (not included) 1.2V NiMh x 12 or 12 x 1.5V AA akaline batteries (not included) A/C adapter 19.5VDC 120-220VAC 4A Weight without batteries 0.95kg HPL20/CS Red, Yellow, Green, Blue color effect gel with frame, comes with hold-all pouch Optional accessories
Computer tablet and DSLR Rig Model #30-380/500 ball bearing gimble adapters crossbar x,y drag adjustment telescopic handles 2 counter weights heavy duty tablet holder adjustable shoulder harness telescopic pole waist belt CamPorta, the tablet/dslr camera rig is to ease stress on holding up both computer tablet and DSLR camera. The whole thing rests on the shoulder, secured by waist belt. Easy to detach from body. The metal harness is adjustable to fit one s shoulders The rig is fully adjustable to body size. On top of the rig, a detachable CamFloPod (pdt# 30-380A) is fitted onto the telescopic column, with push button tilt mechanism. There are ball bearings gimble hanging on the frame work, and also, it has adjustable drag for both axles. User can use tablet or camera of any kind, to have them floating within the frame work, to maintain horizontal even user s body has tilted. This is not a steady-cam type device, but it keeps camera or ipad stays horizontal. Best of all, the operator can have both hands free or just to operate the camera button on screen of tablet. On top of the unit, there is a cross bar for accessories, it comes with 3 adapters, one 1/4 screw, 1 female shoe, and 1 male shoe. More shoes can be added if necessary. The accessories bar will maintain horizontal with the camera below. The frame work can be detached from the CamPorta, and use the CamFloPod by itself. An improved telescopic handles enable operator to shoot low angles. Total weight: 3kg without camera or tablet DSLR camera holder with adjustable rail detachable base bar
Universal CelPhonPod Model # 30-888B, Blue color 30-888R, Red color The CelPhonPod is our latest design of cell phone hand grip with built-in tripod. In additon, we incorporate it with a shoulder strap, so you can treat the cell phone like a camera. It is kind of handy if user is traveling for fun, or in festival, events and so on, it is quick to hold onto the cell phone and press the trigger to snap the shot quickly. Now-a-day, cell phones are with high pixels for imaging, close to digital camera resolution. User can use one hand to shoot picture or video securely. Constructed by aluminum, anodized with red, or blue color for fashionalbe look, and comes with a shoulder strap, which has a quick release buckle to separate and put the phone back quickly. Unscrew the handle, will expose a small tripod within. the whole unit can mount on camera tripod if necessary. The cleverly gripping design enables wide range of cell phone size to be put in, including the largest cell phone you can hold onto down to the slim Apple iphone 5. This is total revolutionary. Fits major smart phones Comes with camera trigger Gripping range: 58 to 120mm Stowaway tripod Adjustable, Removable Shutter release
FlexiArm With double stud, 16mm spigot receptacle at both end Model A. #110-014 30cm 2kg load B. #110-015 56cm 0.5kg load C. #110-FR Flange with tripod screw and 16mm spigot B. A. 3. 1. 2. 4. C. Flange Hand pump suction cups Model 1. #30-6SU 15cm suction cup w/110-fr 2. #30-6SU21 15cm suction cup w/30-21 ballhead 3. #30-4SU 10cm suction cup w/110-fr ( FlexiArm excluded) 4. #30-4SU1/4 10cm suction cup w/1/4 screw Works perfectly inside vehicle TabletPod Model #30-889 Rotable 90 degrees tablet holder w/push button tilt. mounts on 16mm spigot. Gripping range:120 to 210mm
Computer TabletGrip Model #30-309 Self-locking mechanism State-of-art desgin Specification: Steel base with telescopic column With SpaceClamp 110-021A Max. height: 457mm Min. height: 368mm Weight: 2.4 kgs Tilt:120 degrees Rotation:360 degrees Pan:360d. Tilt and Rotation: self locking mechanism. Tablet size: 256mm down to mini ipad Base: steel plate. Adustable column: 76mm Built-in pen holder Tablet lock: with supplied allen wrench. Mounts on light stand with 16mm spigot directly or mount on standard tripod screw Heavy duty design for commercial grade application Mounts on camera tripod Mounts on FlexiArm Mounts on SpaceArm 30-309B The TabletGrip is our latest support for the popular computer tablets. It holds the tablet size from 10.1 or smaller. It has silcone rubber inserts to grip on the Apple ipad, ipad mini or other tablets like Samsung, HP, Sony and others firmly unless it is over the size 256mm. User can even lock it up to prevent unauthorized removal of tablet if necessary. The auto stop mechanism is effortless to position the tablet to any angles without to lock or unlock, same way works on tilt movement. Standard unit comes with steel base, telescopic column. The grip assembly can be separated from the base, and fit onto light stand, flexiarm, articulated arm, camera tripod and clamp providing they all have the 16mm spigot, or tripod screw. The design of our TabletPod is for heavy duty use, so no matter it is for personal use, office, restaurant, retail shop etc.. etc. There are hundreds of way to supspend the tablet in front of user for the best position. We have all kind of support to fit the TabletGrip as optional accessories. It makes the product to suit all kind of work place. The TabletGrip is constructed majorly by light weight aluminum and small nylon parts. As for the base, we use thick steel plate to add stability to the system. This is the ultimate support system for the popular tablets. Once you have our TabletGrip, you won t go for other filmsy support anymore.
Model #MS-11 Mic shock mount w/ballhead, adapter This MS-11 mic shock mount is specially designed for DSLR better sound recording by putting the condenser mic on the shock mount plus it has six cold shoes receptical for accessories like HD monitor, video light, battery pack etc. It fits right onto the DSLR camera s flash shoe. The whole set can be taken apart for storage. Comes with 8 silcone rubber bands, 1 ballhead, 1 1/4 screw adapter. The MS-12 Battery pack is optional accessory to supply power for HD monitor and also video light. Material: anodized aluminum Model #MS-12 12x1.2V NiHM battery pack for HD monitor Model #110-06C Multi purpose compact boom with sand bag 51cm swivel yoke 2 Foam handles 160 cm The multi purpose compact boom folds down to 160cm for easy storage in bag. It has a sand bag counter weight which be able to store water bottles. The swivel boom yoke is detachable, user can screw the boom poles together to use as extension pole for light, microphone, etc. It has standard 5/8 stand spigot mount. Specification: Tubing diameter: 25.4, 22, 19 cm 3 sections Maximum load w/full extension: 3kg Boom length: Open: 160cm Close: 51cm Spigot: 16mm with 1/4-20 screw Weight: 1.9kg Sand bag: water bottle, or brick, or sand
Fog Machine Comes with 3 wire, 3.5m power cable CE, Rohs Model # FM900/120, or 220 Technical specification: Pre-heat time: 5 minutes, Smoke time: 25 secnds, Smoke time interval 40 secounds Tank capacity: 1 liter Smoke volume: 20 square meters / minute Maximum smoke distance: 5 meters Control: RF remote control Transmitter and receiver 10m range Power consumption: 900W Fluid: Stand smoke machine fluid Mounts on 16mm stand spigot Size: 30 x 140 x 190cm Weight: 3.9kg