TRADUR Balance
columns have been ignored by designers for much too long. Only through new thinking in complex design contexts can contemporary design language come into its own both above and below the table top. Furniture feet and functional pillars today present themselves as attractive aids with low space requirements. The appealing design attests to its splendid condition. Thus, in terms of form and technology, TRADUR stands for sophisticated ranges that bring stability and reliability to expression.
TRADUR Structural pillars that are strikingly different TRADUR feet Classic, timeless and highly contemporary Pagina 495-502 TRADUR Base levellers Ergonomic and flexible Pagina 503-508 TRADUR Consoles Keep their promises Page 509-522
feet TRADUR Standard, classic and modern Standard Page 497-498 Click round Page 498 Move 1 Page 499 Trampolo Page 499-500 Tonda Quadra Page 500 Trampolo 2 square Page 501 Kreta Page 501 Rhodos Page 502 Tronco Page 502 Colonna Page 502
feet TRADUR Colour meets shape the colourful side of the TRADUR range white glossy chrome polished stainless-steel coloured matt black pearly stainless-steel chrome matt 496/19 GB
TRADUR feet Standard 6 foot. Classic pillar shape of the best and solid workmanship for universal use. tube-ø 60 mm, may be shortened apart from stainless steel coloured height plus 30 mm height adjustment load-bearing capacity ca. 150 kg 3010002 chrome polished, H 705 mm 3010022 chrome matt, H 705 mm 3010019 stainless steel, H 705 mm 3010001 white glossy, H 705 mm 3010017 matt black pearly, H 705 mm TE 3010004 chrome polished, H 820 mm 3010023 chrome matt, H 820 mm 3010020 stainless steel, H 820 mm 3010036 stainless steel coloured, H 820 mm TE 3010011 chrome polished, H 870 mm 3010024 chrome matt, H 870 mm 3010021 stainless steel, H 870 mm 3010037 stainless steel coloured, H 870 mm TE 3011013 chrome polished, H 1100 mm 3010025 chrome matt, H 1100 mm 3011023 stainless steel, H 1100 mm 3011038 stainless steel coloured, H 1100 mm Standard P 6/71 foot. Classic pillar shape in good, solid workmanship for universal use. The base surface is unpolished and is then coated as needed. tube Ø 60 mm, may be shortened apart from stainless steel coloured height 705 mm (plus 30 mm height adjustment) load-bearing capacity ca. 150 kg 3012001 chrome polished 3012002 stainless steel coloured 497/19 GB
TRADUR feet Standard 8/71 foot. Classic pillar shape in good, solid workmanship for universal use. tube Ø 80 mm, may be shortened apart from stainless steel coloured height 705 mm (plus 30 mm height adjustment) load-bearing capacity ca. 150 kg 3011006 chrome polished 3011024 stainless steel 3011039 stainless steel coloured Ø 168 Ø 5 Ø 146,6 Standard 10/72 foot. Classic pillar shape in good, solid workmanship for universal use with integrated height adjustment, may not be shortened. tube Ø 100 mm height 715 mm (plus 15 mm height adjustment) load-bearing capacity ca. 250 kg 3011008 chrome polished 3011014 stainless steel coloured 755 80 Click round foot. Due to the integrated click technology, a table top can be folded away. tube-ø 50 mm height 705 mm (plus 30 mm height adjustment) load bearing capacity ca. 150 kg 3011088 stainless steel coloured 498/19 GB
TRADUR feet Move 1 foot. Elegant functionality in mobile design with smooth roller technology, may not be shortened. tube Ø 60 mm height 638 mm (plus 100 mm height adjustment) load-bearing capacity ca. 150 kg 3051037 chrome polished Trampolo 1 round foot. Due to the sliding sleeve of -85 mm and +95 mm different heights can be achieved. tube Ø 50 mm sleeve Ø 60 mm load-bearing capacity ca. 150 kg 3011051 stainless steel coloured, H 620-800 mm 3011053 stainless steel coloured, H 800-980 mm 3011055 stainless steel coloured, H 920-1100 mm 3011050 chrome polished, H 620-800 mm 3011052 chrome polished, H 800-980 mm 3011054 chrome polished, H 920-1100 mm 3011090 black matt, H 620-800 mm 3011091 black matt, H 800-980 mm 3011092 black matt, H 920-1100 mm Trampolo 50 round foot. Due to the sliding sleeve, the height can be increased by 180 mm. tube Ø 50 mm sleeve Ø 60 mm load bearing capacity ca. 150 kg 3011080 stainless steel coloured, H 705-885 mm 3011081 stainless steel coloured, H 880-1060 mm 3011082 chrome polished, H 705-885 mm 3011083 chrome polished, H 880-1060 mm 499/19 GB
TRADUR feet Trampolo 80 round foot. Due to the sliding sleeve, the height can be increased by 180 mm. tube Ø 80 mm sleeve Ø 90 mm load bearing capacity ca. 150 kg 3011084 stainless steel coloured, H 705-885 mm 3011085 stainless steel coloured, H 880-1060 mm 3011086 chrome polished, H 705-885 mm 3011087 chrome polished, H 880-1060 mm Tonda Quadra foot. From round to square, may not be shortened. height 705 mm (plus 10 mm height adjustment) top Ø 60 mm round bottom 47 x 47 mm square load-bearing capacity ca. 150 kg 3011072 aluminium coloured, RAL 9006 Quadra foot, square, may not be shortened. height plus 10 mm height adjustment 60 x 60 mm can be mounted flush to corner/ centrally load-bearing capacity ca. 150 kg 3011093 stainless steel coloured, H 705 mm 3011095 stainless steel coloured, H 870 mm 3011097 stainless steel coloured, H 1100 mm 3011094 matt black pearly, H 705 mm 3011096 matt black pearly, H 870 mm 3011098 matt black pearly, H 1100 mm 500/19 GB
TRADUR feet Trampolo 2 square foot. Due to the sliding sleeve of -85 mm and +95 mm different heights can be achieved, may not be shortened. tube 60 x 60 mm load-bearing capacity ca. 150 kg 3011003 stainless steel coloured, H 620-800 mm 3011007 stainless steel coloured, H 795-975 mm 3011010 stainless steel coloured, H 1015-1195 mm 90 90 Kreta square foot aluminium foot. Sturdy square aluminium profile. Suitable for attachment tables, but not for free standing tables, may not be shortened. tube 50 x 50 mm height (plus 10 mm height adjustment) load-bearing capacity ca. 150 kg See catalogue 1 page 517-519/19 GB for the matching consoles. 3013010 stainless steel coloured, H 700 mm 3013012 stainless steel coloured, H 870 mm 3013013 stainless steel coloured, H 1100 mm 90 90 Kreta square foot stainless steel foot. Sturdy square stainless-steel foot. Suitable for attachment tables, but not for free standing tables, may not be shortened. tube 50 x 50 mm height (plus 10 mm height adjustment) load-bearing capacity ca. 150 kg See catalogue 1 page 517-519/19 GB for the matching consoles. 3013035 stainless steel, H 700 mm 3013037 stainless steel, H 870 mm 3013038 stainless steel, H 1100 mm 501/19 GB
TRADUR feet 10 71,5 24,25 24,25 71,5 A A 10 71,5 120 10 R 1,5 71,5 10 120 4,25 4,25 Rhodos square foot aluminium foot. Stainless-steel coloured square foot for fastening to wood. The mounting plate for wood may be installed centrally as well as in a corner, may be shortened. tube 80 x 80 mm height (plus 15 mm height adjustment) incl. mounting plate for wood load-bearing capacity ca. 250 kg See catalogue 1 page 517-519/19 GB for the matching consoles. 3013025 stainless steel coloured, H 700 mm 3013027 stainless steel coloured, H 870 mm 3013028 stainless steel coloured, H 1070 mm 3013029 stainless steel coloured, H 1100 mm 165 Tronco 1 square foot aluminium foot. Aluminium square foot for fastening of wooden plates, may not be shortened. tube 100 x 100 mm height 715 mm (plus 15 mm height adjustment) load-bearing capacity ca. 250 kg 3011045 stainless steel coloured 715 100 Ø 6,5 3 * 120 Ø68 Ø90 Colonna foot. Linear in appearance, with washer, may be shortened. Suitable for: base leveller Cippo and console Capitello. tube Ø 45 mm plus 10 mm height adjustment load-bearing capacity ca. 200 kg When using the glass adapter disk (3021056) bonding should be carried out by a glazier. The disc should be bolted from the bottom. 3013044 stainless steel, H 1055 mm 3013045 stainless steel, H 1105 mm 3013073 stainless steel, H 1160 mm Optional accessories 3021056 Glass adapter disk, stainless-steel, Ø 90 mm 502/19 GB
Base levellers TRADUR Standard, classic and modern Cippo Page 504 Kreta Page 504 Cosa Page 504 Baselift Page 505-507
TRADUR Base levellers Cippo Base leveller. With washer, may be shortened. Suitable for supporting foot Colonna. tube-ø 45 mm 10 mm height adjustment load-bearing capacity ca. 200 kg 3013040 stainless steel, H 145 mm 3013041 stainless steel, H 195 mm Ø 6,5 59 17 90 Kreta Aluminium base leveller as alternative to aluminium frames, stainless-steel coloured anodized. Flexible and versatile in use. 50 50 Kreta Base leveller. Aluminium, may not be shortened. tube 50 x 50 mm 10 mm height adjustment load-bearing capacity ca. 150 kg 3013064 stainless steel coloured, H 150 mm 3013065 stainless steel coloured, H 200 mm Cosa 2 Base leveller, may not be shortened. tube Ø 50 mm 30 mm height adjustment load-bearing capacity ca. 150 kg 3013047 chrome polished, H 150 mm 3013048 stainless steel coloured, H 150 mm 504/19 GB
TRADUR Base levellers Baselift Base lifting unit. Ergonomics means working better and more conveniently, and adapting workflows to the human body. The ideal working height is an essential aspect. Using the Baselift system, the working height of kitchens and other furniture bodies can be individually adjusted in a way that is easy, accurate and reliable. The installation of the system is very simple, because the Baselift is not only incredibly compact, but, thanks to many details, also flexible and easy to install - an innovative solution of the highest class. Simply ground-breaking. It's no longer necessary to compromise on the size of the cooking island or the cupboard range. The Baselift system is scalable. A double base panel (telescopic) is required for installation. Stability and functionality are crucial. Thanks to multi-parallel technology, up to 16 Baselift can be employed together. The arrangement and the number of determine the stability of the overall system. The easy-to-install system is simple to mount. Baselift is a compact lift unit with a minimum height of only 100 mm. The setting range is also 100 mm making it easy to work ergonomically at any working height. Base cabinets need to be ordered from the manufacturer without base levellers. A complete base plate with the overall dimensions of all base cabinets is needed. With the enclosed bluetooth adapter, the Baselift lifting units can be conveniently controlled by smartphone or tablet computer. All you need is the new app which can be downloaded free of charge for ios or Android in the App-Store or at Google Play (LINAK Desk Control). Technical specifications: force: 1500 N speed: 14 mm/s installation dimension: 100 mm lifting height: 100 mm H x W x D: 100 x 440 x 100 mm 5 years manufacturer's warranty 505/19 GB
TRADUR Base levellers Baselift set 4 incl. DPH switch 4 Baselift lift units 8 clips for floor mounting 16 clips for base mounting 1 control CBD6S 4 channel 1 built-in switch DPH 1 extension cable for built-in switch DPH (3000 mm) 1 mains cable 4 motor cable incl. bluetooth adapter for controlling the Baselift lifting units conveniently by smartphone/tablet computer Planning recommendation: For cupboard ranges up to 2000 mm or smaller islands ca. 1200 x 1000 mm. The distance between the Baselifts should be not more than 600 mm. The Baselift lift units are fixed under a support plate, then the kitchen furniture mounted on this. A double base (telescopic) is required. Permissible weight load: 600 kg 3011100 Baselift set 6 incl. DPH switch 6 Baselift lift units 12 clips for floor mounting 24 clips for base mounting 2 controls CBD6S 3 channel 1 built-in switch DPH 1 extension cable for built-in switch DPH (3000 mm) 2 mains cable 6 motor cable 1 connection cable multiparallel incl. bluetooth adapter for controlling the Baselift lifting units conveniently by smartphone/tablet computer Planning recommendation: For cupboard ranges up to 3000 mm or islands ca. 2200 x 1200 mm. The distance between the Baselifts should be not more than 600 mm. The Baselift lift units are fixed under a support plate, then the kitchen furniture mounted on this. A double base (telescopic) is required. Permissible weight load: 900 kg 3011101 Baselift set 8 incl. DPH switch 8 Baselift lift units 16 clips for floor mounting 32 clips for base mounting 2 controls CBD6S 4 channel 1 built-in switch DPH 1 extension cable for built-in switch DPH (3000 mm) 2 mains cable 8 motor cable 1 connection cable multiparallel incl. bluetooth adapter for controlling the Baselift lifting units conveniently by smartphone/tablet computer Planning recommendation: For cupboard ranges up to 4000 mm or islands ca. 3500 x 1200 mm. The distance between the Baselifts should be not more than 600 mm. The Baselift lift units are fixed under a support plate, then the kitchen furniture mounted on this. A double base (telescopic) is required. Permissible weight load: 1200 kg 3011102 506/19 GB
TRADUR Base levellers 72 61,7 24 1,7 52 Baselift Touch Panel Comfort Small and compact control element with frame for installation in worktops. up/down function through touch technology height display preset buttons with memory function hole diameter 66 mm (flush: Ø 72 mm) The Baselift Touch Panel Comfort can easily be used to replace the standard built-in switch (DPH). 3011103 black 507/19 GB
TRADUR Base levellers 508/19 GB
Consoles TRADUR Keep their promises Ellypta rotating system Page 510 Swivelling Turn Around Page 510 Counter top Page 510 Rotating adaptor Page 511 Turn Around Page 511 Korfu Page 512-513 Glass adapter disk Page 513 Counter top Page 514 Capitello Page 515-516 Model 40, 41, 42 Page 516-517 Kreta Page 517-518 Rhodos Page 518-519 Model 50, 51 Page 520 Model 45 Page 520 Wiko Page 521 Console rigid Page 521 Folding console Page 521 Spruzzo Page 522 Glass shelf Page 522
TRADUR Consoles Ellypta rotating system Console. Set consisting of: tube Ø 60 mm painted safety glass plate, 720 x 400 x 15 mm with bonded adaptor disk load-bearing capacity ca. 15 kg in the middle 3023009 stainless steel, glass, H 170 mm 1120 mm Ø 45 max. 1200 mm min. 100 mm APLH/WTH 160 210 260 51 min. 25 Swivelling Turn Around Console. For wooden plate and glass plate. Set consisting of: stainless-steel bar console with rotating adaptor 2 bar feet, height 1120 mm, may not be shortened connecting plate, 2 soft double rollers without counter plate load-bearing capacity ca. 40 kg in the middle 3023010 APL-H 960 mm, console H 160 mm 3023012 APL-H 960 mm, console H 210 mm 3 * 120 Ø 6,5 Ø68 Ø90 Counter top, toughened safety glass Optimal accessories for Swivelling Turn Around (3023010/3023012/3023013). With three bonded adaptor disks made of stainless steel. height 15 mm width 1100 mm depth 500 mm 3023011 satinised glass 500 100 100 Ø 110 100 250 1100 R 50 1 15 2 510/19 GB
TRADUR Consoles Rotating adaptor Optional accessories for Capitello 1 (3013042/3013043) and Model 41 (3021063/3021066). The rotating adapter turns the consoles into rotating consoles. The top mounting plate is simply unscrewed and replaced by the rotating adaptor. 3023050 stainless steel, Ø 90 mm 18 Ø 68 Ø 90 3 * 120 Ø 6,5 Turn Around Console. With mounted rotating adaptor. For larger radii, a support is required. load-bearing capacity ca. 100 kg When using the glass adapter disk (3021056) bonding should be performed by a glazier. Ø68 3023051 stainless steel, H 160 mm 3023052 stainless steel, H 210 mm Ø 90 Optional accessories 3021056 Glass adapter disk, stainless-steel, Ø 90 mm Ø 45 40 160/210 511/19 GB
TRADUR Consoles 60 Ø 5,5 100 80 80 Korfu 1 Console. straight elegant design 60 x 10 mm max. load per pair approx. 60 kg given even distribution, max. spacing of the Suitable for base frame (see catalogue 3, p. 59-61/19 GB). When using the glass adapter disk (3021176) bonding should be performed by a glazier. max. 250 3021177 stainless steel coloured, H 170 mm 60 170 Optional accessories 3021176 Glass adapter disk, stainless steel, Ø 50 mm 40 Ø 7 32 60 Ø 5,5 100 80 80 Korfu 2 Console. slanted elegant design 60 x 10 mm max. load per pair approx. 60 kg given even distribution, max. spacing of the Suitable for base frame (catalogue 3, p. 59-61/19 GB). max. 250 60 170 60 40 When using the glass adapter disk (3021176) bonding should be performed by a glazier. 3021178 stainless-steel coloured, H 170 mm Optional accessories 3021176 Glass adapter disk, stainless steel, Ø 50 mm Ø 7 32 512/19 GB
220 TRADUR Consoles 100 80 10 80 Korfu 3 Console. slanted elegant design 60 x 10 mm max. load per pair approx. 60 kg given even distribution, max. spacing of the Suitable for base frame (catalogue 3, p. 59-61/19 GB). 10 60 When using the glass adapter disk (3021176) bonding should be performed by a glazier. 100 220 3021191 stainless steel coloured, H 220 mm 3 60 Optional accessories 3021176 Glass adapter disk, stainless steel, Ø 50 mm 3 100 33 80 10 18 80 60 10x90 5,5 Korfu 4 Console. With mounting plate. slanted elegant design 60 x 10 mm max. load per pair approx. 60 kg given even distribution, max. spacing of the Suitable for base frame (catalogue 3, p. 59-61/19 GB). 3021192 stainless-steel coloured, H 220 mm 80 220 118 20 Alle Senkungen Ø10,2x90 Ø 6 3 220 3 Glass adapter disk Optimal accessorie for Korfu 1, Korfu 2 and Korfu 3. height 15 mm to be bolted from below Gluing should be performed by a glazier. 3021176 stainless steel, Ø 50 mm 513/19 GB
TRADUR Consoles 400 1100 600 Counter top, toughened safety glass Optimal accessories for Capitello 1, 2, 3 (3013042/43, 3021072/73/74/75/76/79). Rounded edges and round glass adaptors glued on. H 12 mm, W 1100 mm, D 400 mm glass adapter H 12 mm R 20 12 3023014 clear glass 3023015 satinised glass 514/19 GB
TRADUR Consoles 59 Ø 6,5 17 Capitello 1 Console with washer and bolted connection. Suitable for supporting foot Colonna (see catalogue 1 pages 502/19 GB) and base leveller Cippo (see catalogue 1 pages 504/19 GB). max. load per pair approx. 60 kg given even distribution, max. spacing of the When using the glass adapter disk (3021056) bonding should be performed by a glazier. 90 3013042 stainless steel, H 145 mm, tube Ø 45 mm 3013043 stainless steel, H 195 mm, tube Ø 45 mm 145/195 Ø 45 Optional accessories 3021056 Glass adapter disk, stainless-steel, Ø 90 mm 3023050 Rotating adaptor, stainless steel, Ø 90 mm Ø 11 59 Ø 6,5 Capitello 2 Console. With bolted connection. slanted max. load per pair approx. 40 kg given even distribution, max. spacing of the Ø 90 17 90 When using the glass adapter disk (3021056) bonding should be performed by a glazier. 3021075 stainless steel, H 170 mm, tube Ø 45 mm 3021072 chrome polished, H 170 mm, tube Ø 45 mm 3021076 stainless steel, H 210 mm, tube Ø 45 mm 3021073 chrome polished, H 210 mm, tube Ø 45 mm Ø 45 170/210 Optional accessories 3021056 Glass adapter disk, stainless-steel, Ø 90 mm 60 Ø 8,5 3 * 120 Ø 6,5 Capitello 3 Console. slanted max. load per pair approx. 40 kg given even distribution, max. spacing of the Ø68 Ø90 When using the glass adapter disk (3021056) bonding should be performed by a glazier. 3021074 stainless steel, H 183 mm, tube Ø 45 mm 3021079 chrome polished, H 183 mm, tube Ø 45 mm 183 mm Ø 45 45 max. 250 mm Optional accessories 3021056 Glass adapter disk, stainless-steel, Ø 90 mm 183 mm 515/19 GB
45 TRADUR Consoles R 40 183 Capitello 4 Console. With mounting plate. slanted max. load per pair approx. 60 kg given even distribution, max. spacing of the 3021089 stainless steel, H 180 mm, tube Ø 45 mm 80 R2 Ø 45 180 Ø 11 Ø 5,5 59 Ø 6,5 3 * 120 29,5 29,5 Model 41 Console. With bolted connection. max. load per pair approx. 60 kg given even distribution, max. spacing of the 17 51 When using the glass adapter disk (3021056) bonding should be performed by a glazier. 3021063 stainless steel, H 190 mm, tube Ø 50 mm 3021066 stainless steel, H 230 mm, tube Ø 50 mm Ø 90 Optional accessories 3021056 Glass adapter disk, stainless-steel, Ø 90 mm 3023050 Rotating adaptor, stainless steel, Ø 90 mm 190/230 Ø 50 Ø 8,5 59 Ø 6,5 3 * 120 29,5 29,5 Model 40 Console. max. load per pair approx. 40 kg given even distribution, max. spacing of the 17 51 When using the glass adapter disk (3021056) bonding should be carried out by a glazier. 3021097 stainless steel, H 185 mm, Ø 35 mm Ø 90 Optional accessories 3021056 Glass adapter disk, stainless-steel, Ø 90 mm 185 mm Ø 35 45 max. 250 mm 185 mm 516/19 GB
Ø 6,5 TRADUR Consoles 59 Ø 6,5 3 * 120 29,5 29,5 Model 42 Console. With bolted connection. slanted max. load per pair approx. 60 kg given even distribution, max. spacing of the 17 51 For granite tops, the Capitello series is better. When using the glass adapter disk (3021056) bonding should be performed by a glazier. 3021083 stainless-steel, H 170 mm, Ø 35 mm 3021084 stainless-steel, H 230 mm, Ø 35 mm Ø 90 Ø 35 170/230 Optional accessories 3021056 Glass adapter disk, stainless-steel, Ø 90 mm 60 Ø 8,5 3 * 120 Glass adapter disk Optimal accessories for Colonna, Capitello 1, 2, 3, Turn Around and model 40, 41, 42 (see p. 154/18 GB, 163/18 GB and 167 169/18 GB). height 12 mm to be bolted from below Gluing should be performed by a glazier. 3021056 stainless-steel, Ø 90 mm Ø 68 90 70 Ø 5,5 70 90 Kreta 1 slanted Console. slanted aluminium profile 50 x 50 mm, milled slant angle 60 max. load per pair approx. 60 kg given even distribution, max. spacing of the May be used for fastening to wood and with adaptor for gluing to UV glass. 170/190/230 50 50 90 90 When using the glass adapter disk (3023007) bonding should be performed by a glazier. 3023028 stainless steel coloured, H 170 mm 3023022 stainless steel coloured, H 190 mm 3023023 stainless steel coloured, H 230 mm 60 3023030 matt black, H 170 mm 3023031 matt black, H 190 mm 3023032 matt black, H 230 mm TE Optional accessories 3023007 Glass adapter disk stainless-steel 517/19 GB
TRADUR Consoles 90 Ø 5,5 70 90 170/190/230 70 Kreta 2 straight Console. Aluminium profile 50 x 50 mm. straight max. load per pair approx. 60 kg given even distribution, max. spacing of the 3023029 stainless steel coloured, H 170 mm 3023026 stainless steel coloured, H 190 mm 3023027 stainless steel coloured, H 230 mm 3023033 matt black, H 170 mm 3023034 matt black, H 190 mm 3023035 matt black, H 230 mm 50 Kreta 3 slanted Console. With mounting plat. slanted aluminium profile 50 x 50 mm, milled max. load per pair approx. 60 kg given even distribution, max. spacing of the 3021190 stainless steel coloured, H 235 mm 90 31 50 50 235 70 90 235 70 90 10 71,5 24,25 24,25 71,5 A A 10 71,5 120 10 R 1,5 71,5 10 120 120 170/230 3 4,25 4,25 Rhodos 1 Console. aluminium profile 80 x 80 mm max. load per pair approx. 60 kg given even distribution, max. spacing of the 3023046 stainless steel coloured, H 170 mm 3023044 stainless steel coloured, H 230 mm Optional accessories 3013024 glass adapter disk, stainless steel 80 518/19 GB
TRADUR Consoles 10 71,5 24,25 24,25 71,5 A A 10 71,5 120 10 R 1,5 71,5 10 120 4,25 4,25 Rhodos 2 Console. aluminium profile 80 x 80 mm with one or two integrated earthing contact sockets supply line 1500 mm, 3-wire, free ends connection through the worktop max. load per pair approx. 60 kg given even distribution, max. spacing of the 120 3023047 stainless steel coloured, H 170 mm, 1 socket 3023045 stainless steel coloured, H 230 mm, 2 sockets 3 Optional accessories 3013024 glass adapter disk, stainless steel 170/230 80 Rhodos 3 Console. slanted aluminium profile 80 x 80 mm max. load per pair approx. 60 kg given even distribution, max. spacing of the 3023040 stainless steel coloured, H 170 mm max. 250 40 170 Ø 11mm min. 100 Rhodos 4 Console. slanted aluminium profile 80 x 80 mm with one integrated earthing contact socket supply line 1500 mm, 3-wire, free ends connection through the worktop max. load per pair approx. 60 kg given even distribution, max. spacing of the 3023041 stainless steel coloured, H 170 mm max. 250 40 170 min. 100 519/19 GB
TRADUR Consoles Model 50 Console. slanted aluminium profile 50 x 50 mm max. load per pair approx. 30 kg given even distribution, max. spacing of the 3021183 aluminium anodised, H 170 mm 3021184 stainless steel coloured, H 170 mm 3021185 aluminium anodised, H 220 mm 3021186 stainless steel coloured, H 220 mm 170 / 220 8 95 79 8 Ø 5,5 Optional accessories 3021182 Glass adapter disk, aluminium, 110 x 110 mm Model 51 Console. For fastening to cabinet body. slanted aluminium profile 50 x 50 mm max. load per pair approx. 30 kg given even distribution, max. spacing of the 3021180 aluminium anodised, H 228 mm 3021181 stainless steel coloured, H 228 mm 95 228±3 Optional accessories 3021182 Glass adapter disk, aluminium, 110 x 110 mm 45 50 50 Ø 5,5 228±3 95 8 79 8 79 95 Model 45 Console. For fastening to cabinet body. aluminium profile 50 x 10 mm max. load per pair approx. 30 kg given even distribution, max. spacing of the 3021082 aluminium anodised, H 322.5 mm 520/19 GB
TRADUR Consoles Console Wiko Console, angle console. tube 20 x 15 mm hole-ø 4.5 mm with punch depression arm 180 x 180 mm: load bearing capacity ca. 20 kg arm 400 x 300 mm: load bearing capacity ca. 15 kg 3021033 silver coloured, 180x180 mm 3021043 silver coloured, 400x300 mm Console rigid Sturdy sheet-metal construction. Shelf support with welded mounting plate. primed in grey load-bearing capacity ca. 75 kg 3021085 A 280, W 53, C 100 mm 3021086 A 330, W 53, C 100 mm 3021087 A 380, W 65, C 130 mm 3021088 A 480, W 65, C 130 mm B A C 280-480 mm Folding console Robust steel construction. When opened, the folding console automatically engages and may be disengaged just as easily by lifting the locking arm. primed in grey load-bearing capacity ca. 75 kg 3021093 A 380, W 82, C 134, D 50 mm 3021094 A 480, W 82, C 152, D 50 mm 3021095 A 580, W 82, C 178, D 50 mm B C D A 380-580 mm 521/19 GB
200 8 TRADUR Consoles Spruzzo Splash protection for fastening to the worktop. The bolted connection is fastened underneath the worktop. May be used for stove tops and sinks, also in gastronomy and shop construction. May also be used as a screen. Spruzzo Console. Splash protection. Suitable for 8 mm glass plate thickness. bore Ø 6 mm glass shelves to be ordered separately 3021132 stainless steel coloured, H 200 mm, Ø 20 mm Ø 20 Glass shelf Optional accessories for Spruzzo (3021132), Kaiman (3021078), Prior (3021032), Two (3021021-3021024), Akro (3021009) and Moon (3021090, 3021091). high-quality glass plates with polished edges thickness 8 mm depth 200 mm 3021014 clear glass, L 580 mm 3021026 clear glass, L 880 mm 3021124 satinised glass, L 1140 mm 3021114 satinised glass, L 580 mm 3021126 satinised glass, L 880 mm 3021125 satinised glass, L 1140 mm 522/19 GB