www.geneeworld.com Tilt & Touch Table USER MANUAL & QUICK START
Contents 1. Welcome To Your Genee Touch Table 2. Specification 3. How To Use Your Touch Table Getting Started How To Use Your Software 1. User Interface 2. Entering G-Safe Mode 3. Application Management 4. Creating an App on Your Touch Table 5. Touch Table Diagnostics 6. Audio 7. Website Authorisation Using Our G-Safe Software 8. How To Setup Your Touch Table To A Network 9. Padlock Mode Registration Of Your Warranty Now you have your Genee Tilt & Touch table you need to validate your warranty, please use our quick and easy online registration service by visiting our warranty registration page www.geneeworld.com/register. Please register within 28 days of receipt of goods. Visit www.geneeworld.com/support for a copy of our customer care pack and product guides. If you need any assistance to register your product please call our technical team on +44 (0)1902 390878 or email us at warranty@geneeworld.com. Why Register Your Product Confirmation of Ownership Provides a record in case of product loss or theft. Safety Allows us to contact you with important product notifications. Improved Product Development Helps us to continue to design innovative products that meet your needs. Genee Knowledge Base & Support Support If you have any trouble either downloading or activating your software please contact technical support on +44 (0)1902 390878 or email support@geneeworld.com or submit your call using our help desk at http://www.geneeworld.com/ support-help-desk.php. Knoweldge Base If you have any queries you may be able to find the answer through our knowledge base articles. These can be accessed here. http://www.geneeworld.com/help-desk/ knowledgebase.php. Please Note: The touch table application version number is displayed bottom right, and should be referred to when reporting faults or seeking software support.
Welcome To Your Genee Interactive Tilt & Touch Table The Tilt & Touch is a great addition to any nursery, Key Stage 1 or Key Stage 2 classroom with the objective of engaging children using educational gaming software to inspire learning. The robust aluminium table frame, painted using anti-bacterial paint, includes a built-in PC, meaning users are simply one touch away from transforming the classroom into a collaborative learning environment. Users can use it as a table format by moving it into a horizontal position, allowing more children to interact together around the table. Alternatively, the table can be tilted through 75 degrees before being locked in place to enable children to use it more comfortably sitting down or if they playing on their own. If you have purchased a High-Low Table then you will also be able to move the table up and down to meet the individual child s needs. Painted with Anti-Bacterial Paint Available to purchase in a number of colours all of which are made from anti-bacterial paint, therefore they won t harbour germs and will be easily cleaned. Built-In PC A fully built-in PC is included on all G-Touch Tables. Saving you having to connect to external computer devices for uploading and displaying content. Lockable Safety Wheels Lockable wheels support easy and safe use within the classroom environment and allow multiple users to work safely on any G-Touch Table at the same time. Tilting and Lockable Screen The G-Touch Tables can be tilted through 75 degrees before being locked in place. Making both viewing and touch more comfortable for children using it. G-Safe Built-In The teacher has full control over the content that the child is able to access. They can create black and white lists for all browsing as well as being able to create pin access so that a child does not find themselves in an area they shouldn t be. Pre-loaded With a Huge Range of Educational Software Genee Inclusive Software Learn Hub, Spark, Explorer & Early Years English & Maths. Microsoft Software Surface Globe, Surface Garden Point, Surface Collage, Surface Lagoon, Microsoft Blackboard, Microsoft Paint. Yellow Door Traditional Tales, Come Alive Stories; Goldilocks and the Three Bears, Jack and the Beanstalk, Little Red Riding Hood, The Billy Goats Gruff, The Gingerbread Man & Three Little Pigs. Additional Web Links Cbeebies, 2Simple, Safe Search, Cyberlink You Paint, Discovery Education & Top Marks. EARLY YEARS
Specification The below gives an overview of the technical specification of your Genee Tilt & Touch Table. If you have any additional queries please contact us. 32 Tilt & Touch 42 Tilt & Touch 42 High-Low Product Code TTA010010 TTA010020 TTA010030 Display Type 32 LED Resolution 1920 x 1080 pixels (16:9) 42 LED Resolution 1920 x 1080 pixels (16:9) 42 LED Resolution 1920 x 1080 pixels (16:9) Display Colours 8 bit Brightness 350cd/m 2 Contrast 3000:1 Response Time Touch 8ms P-Capacitive Touch, 10 Point System Chips Hard Disc Storage Audio Intel Ivy Bridge i5, RAM: 8 GB (Built in WiFi) 500GB Integrate Realtek Audio Device Display Intel HD Graphics 4000 Electrical Power Consumption ON Mode <110W, Standby <4W ON Mode <135W, Standby <4W ON Mode <135W, Standby <4W Working Voltage AC:100V-240V, 50/60Hz Dimensions Flat (0o) (WxDxH) (mm) 985 x 690 x 559 1225 x 820 x551 Tilted (75o) (WxDxH) 985 x 690 x 845 1225 x 642 x 894 1225 x 821 x 677 (lowest) 1077 (highest) 1225 x 821 x 864 (lowest) 1264 (highest) Connection Ports Outputs Inputs USB 2.0 x2, Audio Out x 2 (PC x1, Monitor x1), VGA x1, HDMI x1 LAN x1, USB Touch x1, Audio in x2 (PC Monitor x1), VGA x1, HDMI x1 Other N/A N/A AC Power Socket (Type G) x2 A number of finishes available.
How To Use Your Tilt & Touch Table Getting Started Plug in your touch table to power up. To tilt your table into a comfortable position; On a standard Genee touch table you will find a plastic handle on the side behind the screen, you have to pull this out to unlock, tilt to desired angle and then make sure it clicks back into position to lock the screen in place. On a High-Low Genee touch table behind the screen to the side is a screw lock handle, unscrew to unlock, move screen to desired position then tighten screw to lock back in place. If you have purchased a High-Low table then it can also be moved mechanically up and down using the attached remote. The remote has up and down buttons, simply press one to move either way. How To Use The Software 1. User Interface When your table loads you will see the application screen similar to that shown below. (Image 1) You can then choose which application you would like to launch. If you are browsing in a folder and you would like to go back a step simply press the folder icon at the top left of the screen. 1. If you have a number of icons/ pages displayed on your screen you can swipe-scroll left and right to access them. If you are concerned about the connection to the internet then you can see your current status to the bottom left of the screen. 2. Entering G-Safe Settings A PIN code is required to enter the G-Safe software settings menu. (Default 1234) The user needs to reveal a small panel that is positioned to the top right of the touchscreen. In order to reveal the bar touch the light grey bar. This will reveal two icons; a Cog and a Power switch. (See Image 2) 1. Cog: This is the button you use to launch your G-Safe mode and will consequently reveal a PIN entry pad. (See Image 3) 2. Power Symbol: Pressing the power switch will reveal the PIN entry pad and if the correct PIN is entered this will power down the touch table.
How To Use Your Tilt & Touch Table 2. Entering G-Safe Settings (continued) 2. 3. Image 3 shows you the PIN entry pad. This is how you enter the settings menu. PIN codes can be changed in G-Safe settings menu however there is a default PIN that your touch table is shipped with. This is 1234. How to change PIN codes; A PIN code is required to set up your touch table G-Safe settings menu. There are 5 different PIN codes that your table is pre-setup with. (See Image 4) The 5 PIN codes are for the following 5 sections; Admin (G-Safe) 1234, Padlock 2222, Audio 1111, Shutdown 4444 & Quit To OS 3333. If you would like to alter any of these PIN codes then this can be done under the PIN code settings menu in the main settings tab. 4. 3. Application Management Manage the apps that are on your touch table. You are able to create, move and delete apps, weblinks and folders in this section. There are 3 main buttons that will allow you to manage your applications. (See Image 5) The three main buttons you can see are Select, New and Edit Mode. 5. 6.
How To Use Your Tilt & Touch Table 3. Application Management (continued) How to delete apps: First tap the Select Button. After you have tapped the Select button you will be able to select individual or multiple apps. To select an app simply check the tick box next to it and click delete. (See Image 6) This will remove the app from the start up application within the touch table but it will still be stored on the hard drive. How to move apps: First tap the Select Button. After you have tapped the Select button you will be able to select individual or multiple apps. To select an app simply check the tick box next to it and use the buttons on the right, that are now active, (See Image 6) using the shift up and shift down buttons to move the app to your chosen place. This will not save until you click the apply button. 4. Creating an App on your Touch Table You can create 3 different types of applications on your touch table. These are a folder, an application and a web link. (Image 7) 7. 8. Firstly any application must be installed to the PC from the standard Windows OS. You can access this by using the Quit to OS PIN code (default 3333) or selecting the Quit to OS option from the G-Safe settings menu. When installing the application, make sure to note the location it is installed on the PC. Reload the G-Safe software and enter G-Safe Settings Manage Apps Create New Application. Add Title, Description and choose the colour of the font, background and border using the sliders. Select an image to use for the icon and select whether it fills the whole button or not. Select the folder icon next to EXE File, this will then allow you to browse to the location where you installed the app, find the EXE (Executable) file and select. Press OK to add app to G-Safe. Enter G-Safe Settings Manage Apps Create New Web Link Add Title, Description and choose the colour of the font, background and border using the sliders. Select an image to use for the icon and select whether it fills the whole button or not Enter the full URL (web address) including the http:// (or equivalent) in the Web URL box Press OK to add Web Link to G-Safe
How To Use Your Tilt & Touch Table 5. Touch table Diagnostics The diagnostic screen is where all the system information is kept. Basic information about the system, such as the operating system, memory, HDD space and more. (See Image 10). You can locate this on the Settings icon. 10. 11. 6. Audio It is possible to control the volume of the Touchtable through the wireless remote control, using the volume buttons, and through the audio tab. To adjust the volume on the audio tab; The audio tab consists of a mute button, a volume control slider and a test button. The test button will play a sound at the volume level displayed by the audio slider. If the mute button is pressed then no sound will play when the test button is pressed. Clicking apply will then set the volume. (See Image 11). 7. Website Authorisation Using Our G-Safe Software 12. Whitelist & Blacklist Websites. Using our G-Safe software you can black and whitelist websites to ensure that children don t access anything not authorised online. These can be configured on the browser tab of the administration mode and will be kept from any changes using your PIN code (previously setup in step 2). The browser tab has 2 options. Whitlisting and Blacklisting. (See Image 12). If there are certain websites that you do no want to be accessed you can add these to the blacklisted section. This will block them from being used. If there are websites that you would like to be kept as accessible these can be allocated to the whitelist section.
How To Use Your Tilt & Touch Table 8. How to Setup Your Touch Table to a Network The network tab allows easy set up to wireless networks. This section will show all available wireless networks that the touch table can connect to. When there is a network which the touch table can connect it will be displayed in the light grey box in the centre of the screen. (See Image 13) Selecting the desired network from here will prompt the wireless access password. Upon confirmation of the input password the touch table will then connect to the network. If the desired network does not appear straight away then it is possible to rescan for available networks by pressing the Rescan button to the centre. If you are still unable to connect it is also possible to remove the touch table from the network by pressing the Disconnect button. 13. 9. Padlock Mode 14. The touch table has a Padlock mode built in. To enter padlock mode use the padlock PIN code (default 2222) Enabling this mode will disable the touch table and display an image of a padlock on a blank screen. (See Image 14) The only way to exit this mode would be to drag the padlock icon sideways and input one of the set PIN codes. This can either be the Padlock PIN code or the Admin PIN code. This will unlock the device and it will continue as normal.
Contact Us Tel: 01902 390878 Email: enquiries@geneeworld.com Address: Libra House, 2 Upper Zoar Street, Wolverhampton, England, WV3 0LA Website: www.geneeworld.com