5 FO Trunk Cable www.easylan.de FO Trunk Cable u 2 to 144 fibers u Various cable types u PC and APC polish u Tuned connectors u Gradations as desired u Up to IP67 u etc. 104
05 FO Trunk Cable Contents FO Trunk Cable Page FODH/1-Distribution System 106 FODH/2-Distribution System 107 FODH/E-Distribution System 108 FOCT-Distribution System 109 MTP -Cable and Connector Systems 110 Service Reel 111 Trunk cable FO FO- Trunk Cable 105
FODH / 1 Fiber Optic Trunk Cable / Variant 1 The robust FO distribution system for industry and outdoor applications: corresponds to IP44 degree of protection and is optionally waterproof up to IP67 for manual and mechanical pulling with tractive forces up to 500 N features cast aluminium distributor head with step-resistant, watertight corrugated cable tube which protects the assembly and also assists in pulling cable and as a buffer against jerky tensile loads protective hose is screwed onto distributor head yet not attached to the fibers Advantages: Mounting in a housing opening Stepped whip length: 5cm each All common types of connectors like LC, SC, ST, FC or E2000 Avaible in PC or APC polish All types avaible with Kevlar reinforced 1.8mm Fan-outs or with 0.9mm Fan-outs FR-LSOH Kevlar reinforced colored Fan-outs: Fiber typical OS2: yellow; OM2: black; OM3: aqua; OM4: violet; Each with colored rings according to IEC60304 Colored 0.9mm Fan-outs according to IEC60304 Special designs according to customer specifications possible Dimensions and mounting data for SC, ST, FC, E2000, LC connectors: Fibers 2 12 24 48 60 92 120 144 Length of splitter 90 mm 101 mm 140 mm 140 mm Ø Splitter 25 mm 33 mm 56 mm 56 mm Ø Protective hose 33 mm 43 mm 56 mm 65 mm Connector lengths* shortest fan-out 550 mm 550 mm 550 mm 550 mm longest fan-out (for max. number of fibers) 800 mm 1300 mm 1700 mm 1700 mm * for standard length gradation of 50 mm, ensuring the most compact design possible. Special assemblies per customer specifications are available. Dimensions are approximate figures. OM4 OM3 OS2 106
FODH / 2 Fiber Optic Trunk Cable / Variant 2 The FO distribution system for the widest variety of installations. The system is robust and known for its ease of installation: simply feed in the cable, open the red clip, remove the hose and connect the plug. Done! robust design handles the widest variety of installation environments IP20 features aluminum distributor head up to 144 fibers protective hose disconnects via red attachment clip, which can be removed in seconds fan-outs are impervious to dust and are housed in non-bendable corrugated hose which also assists in feeding in cable and acts as a buffer against jerky tensile loads Advantages: Mounting in a housing opening Stepped whip length: 5cm each All common types of connectors like LC, SC, ST, FC or E2000 Avaible in PC or APC polish All types avaible with Kevlar reinforced 1.8mm Fan-outs or with 0.9mm Fan-outs FR-LSOH Kevlar reinforced colored Fan-outs: Fiber typical OS2: yellow; OM2: black; OM3: aqua; OM4: violet; Each with colored rings according to IEC60304 Colored 0.9mm Fan-outs according to IEC60304 Special designs according to customer specifications possible FODH/2 can be installed in the FODH component rack (special stepped 1.8m Fan-out) in subrack (page 162) by using the FODH slot module (page 164). Dimensions and installation data for FO connectors: Fibers 2 24 36 72 96 144 Length of splitter 64 mm 64 mm 64 mm Ø Red clip 36 mm 42 mm 50 mm Ø Protective hose 28.5 mm 35 mm 42 mm Connector lengths* shortest fan-out 550 mm 550 mm 550 mm longest fan-out (for max. number of fibers) * for standard length gradation of 50 mm, ensuring the most compact design possible. Special assemblies per customer specifications are available. Dimensions are approximate figures. 800 mm 1400 mm 1700 mm OM4 OM3 OS2 Trunk cable FO 107
FODH / E Fiber Optic Trunk Cable / Variant E The FO distribution system for smaller installations and narrow feeds. This Eco variant is based on a plastic distribution head and is the slimmest and lightest in the EasyLan product range. for small installation environments IP20 plastic distribution head up to 24 fibers maximum diameter of 28.5 mm fan-outs fed in buckle-free corrugated hose Advantages: Mounting in a housing opening Stepped whip length: 5cm each All common types of connectors like LC, SC, ST, FC or E2000 Avaible in PC or APC polish All types avaible with Kevlar reinforced 1.8mm Fan-outs or with 0.9mm Fan-outs FR-LSOH Kevlar reinforced colored Fan-outs: Fiber typical OS2: yellow; OM2: black; OM3: aqua; OM4: violet; Each with colored rings according to IEC60304 Colored 0.9mm Fan-outs according to IEC60304 Special designs according to customer specifications possible FODH/2 can be installed in the FODH component rack (special stepped 1.8m Fan-out) in subrack (page 162) by using the FODH slot module (page 164). Dimensions and installation data for FO connectors: Fibers 2 24 Length of splitter Ø Splitter Ø Protective hose Connector lengths* shortest fan-out longest fan-out (for max. number of fibers) 69 mm 26.1 mm 28.5 mm 550 mm 1100 mm * for standard length gradation of 50 mm, ensuring the most compact design possible. Special assemblies per customer specifications are available. Dimensions are approximate figures. OM4 OM3 OS2 108
FOCT Distribution System Connectors assembled directly onto the cores, offering the following advantages: ease of follow-on handling, slim build and cost-effective. The pre-assembled cores can be quickly and securely connected with couplings, eliminating the need for splicing and on-site assembly. As with all our FO trunks, the manufacturing process is carried out under laboratory conditions using cutting-edge technology. PC and APC polish, plus tuned connectors Connectors: SC, ST, FC, E2000, LS, etc. Break-out or mini break-out cable Extra-slim build Pre-assembled with all major connector types One-side / dual-side assembly Graduated fibers Up to 24 fibers Fiber To The Desk Fitted with transparent protective hose, depending on version Environmentally friendly transport packaging Additional labeling upon request (e.g. floor, room number etc.) Optimal system packaging ensures safe transport. The roll can be left in the packaging during subsequent wiring efforts - simply open the perforated lid on the side of the box and use the box to assist in unrolling cable. Upon request, trunk cables can be sorted per your specifications and packaged on a pallet. Trunk cable FO 109
MPO Cable The MPO cables have been specially designed for the high demands placed on packing density, making reversible and space-saving FO cabling possible in data centers. The various fiber quality levels are designated by different colored plugs. Properties: 4, 8, 12 or 24 fibers Spring-loaded ferrules PushPull locking PC and APC polish Additional lettering on request (e.g. room number etc.) Application: Data center Plug & Play fiber optic installation Backbone cabling Description Multimode Multimode Singlemode MTP Multifiber connector type MTP Elite PC 0 MTP Elite PC 0 MTP Elite APC 8 Color MTP housing turquoise magenta yellow I L insertion loss typ. 0.15 db / max. 0.35 db typ. 0.15 db / max. 0.35 db typ. 0.15 db / max. 0.35 db R L return loss typ. > 35 db / min. 25 db typ. > 35 db / min. 25 db typ. > 65 db / min. 55 db Polarity Method A / B / C Method A / B / C Method A / C Color single plug housing turquoise magenta Blue (LC) / green (LC APC) Norm IEC 61 754-7 IEC 61 754-7 IEC 61 754-7 Temperature range ( C) -40 to +80-40 to +80-40 to +80 Mating cycles 1000 1000 1000 110
Service Reel No company should be without a service reel to handle emergency situations and to bridge potential outages in the event of service work, maintenance and repair efforts. We offer you various configurations: from small hand rolls to convenient trolleys. A high-quality Fiber Optic Distribution Head (FODH) with graduated connector lengths is assembled on the roll-out side. Prior to installation, the connectors are protected from external influences in a waterproof (IP67) installation hose which protects against excessive pulling and lateral pressure. The internal cable end is connected to adapters and is assembled in a dust-impervious, bumpresistant housing (IP50). High-quality materials and the EasyLan distribution system ensure long service life. Custom solutions are developed according to your specifications. Range of Application: Construction of replacement connection in the event that FOC links fail due to damage. Here, the reel is brought to the network distribution cabinet and the cable is drawn to the opposite end using the installation box. Active components are connected via FO adapter cables. In general, installation is possible in any logistics and manufacturing environment in which FO has been laid in ducts. Trunk cable FO 111