Powerware 9910-P11 and 9910-P16 High Performance High Reliability & Availability Flexible & Configurable Advanced Communications 2002 Eaton Corporation. All rights reserved.
P11 and P16 Features Fourth-Generation Online topology ensures continuous, clean power Advanced Battery Management Plus (ABM Plus ) significantly increases battery life Extended Battery Modules (EBMs) prolong backup times Load Segments enable scheduled shutdowns Two-in-One form factor provides versatility 2U rack-mount height conserves valuable rack space Hot-swappable batteries simplify service Product Snapshot Power Rating: 1000 VA/700 Watt 1500 VA/1050 Watt Voltage: 220-240 Vac Frequency: 50/60 Hz Configuration: 2U, 19 tower or rack Runtime (in min,): Half/Full load (15/5) Input line cord: IEC-320-C14 Number of outlets: 6 IEC-320-C13 Options: EBM, SNMP, rack kit and MultiServer
P11 and P16 Applications The P11 and P16 were specifically designed, engineered and approved for IBM applications iseries and AS/400 pseries and RS/6000 xseries and other eservers Storage and networking devices 9406 7025 7043 7044 9910 UPSs are ideal power protection for iseries family of servers
P16 with i5 520 Tower
Series 9 Power Protection The P11 and P16 provide double-conversion online power protection from all 9 of the most common power problems that threaten your equipment and data Power failures Power sags Power surges Brownouts High voltage spikes Frequency variations Switching transients Harmonic distortion Line noise
P11 and P16 Fourth-Generation Online Topology TM Internal Automatic Bypass Utility Filtering Load Wide input voltage range Reduces battery usage AC to DC Rectifier Reserves batteries for power failures--when you need maximum runtime Extends UPS service life Reduces battery replacement costs DC to AC Inverter Bi-Directional Power Converter EnergyShare Under extremely poor utility conditions, P11 and P16 models take power from both the utility and battery Reduces battery usage Extends runtime and service life of the battery Battery
Energy Share During extreme brownouts, the P11 and P16 provide an extra level of protection; the UPS shares battery and incoming voltage to continue to provide ±3% of nominal voltage Input Voltage Range Battery Power: >288V Online voltage regulation: 160-288V (no battery power needed) EnergyShare range: 120-160V (combined battery and utility) Battery Power: <120V
ABM Technology BC Doubles battery service life by charging only when needed Optimizes recharge time Does not trickle charge and starve the electrolyte Intelligent microprocessor controlled - Only true & automatic battery check (periodic, controlled discharge) for most accurate advanced failure protection Sleep Feature - no unnecessary battery drain
Compact Design The P11 and P16 packs superior power protection in a sleek, compact design. 19 17 3.5
Informative User Interface Replace Battery (ABM) Site Wiring Fault Self-Test Overtemperature Normal Mode (UPS On) Battery Mode Bypass Mode Overload Load Level/ Battery Level Alarm Silence/ Test Button Off Button On Button (Start-On-Battery) Note: rotate 90 for cabinet configuration
Load Segments Individual control of two Load Segments Power down sequencing of Load Segments Extends runtime for critical devices Power up sequencing of Load Segments Orderly power up of connected devices Scheduled on/off times Turn off equipment for security and power conservation
Hot-Swappable Batteries No need to shut down your critical load when replacing batteries
Extended Battery Modules Add EBMs to extend backup time UPS and two EBMs
EBM Connection EBM #1 EBM #2
P11 Battery Runtimes Battery Runtime (in minutes)* Standard (Std) Watts Internal Batteries +1 EBM +2 EBMs 140 37 271 546 280 19 142 278 490 9 72 156 595 6 59 124 700 5 48 104 Rack height 2 4 6 * Up to 2 EBMs can be connected to the P11. EBM runtimes include P11 internal batteries. Runtime chart provides typical information. Battery runtimes are approximate and may vary with equipment, configuration, battery age, temperature, etc.
P16 Battery Runtimes Battery Runtime (in minutes)* Standard (Std) Watts Internal Batteries +1 EBM +2 EBMs +3 EBMs +4 EBMs 280 46 177 331 501 682 490 25 96 180 272 370 595 21 76 142 214 292 700 16 61 115 174 237 875 11 46 87 131 179 1050 8 37 70 106 144 Rack height 2 4 6 8 10 * Up to 4 EBMs can be connected to the P16. EBM runtimes include P16 internal batteries. Runtime chart provides typical information. Battery runtimes are approximate and may vary with equipment, configuration, battery age, temperature, etc.
P11 and P16 Rear Panel
REPO/Network Transient Protector Shut down UPS remotely with REPO port; ideal for rack applications Network Transient Protector provides protection from back door disturbances that travel through phone/network lines
Powerware Extensions Software for IBM Director Seamless UPS and software integration into IBM Director Network Management System (NMS) Real time monitoring, management and alarm notification of all UPSs in the network: e.g. battery status, battery replacement, load level and metering information Automatically launches LanSafe and ConnectUPS Web/SNMP Card applications from within Director Available on Powerware web FREE-OF-CHARGE
Power Management Software Powerware Software Suite The industry s most comprehensive software bundle, The Powerware Software Suite, is free and included with every P11 and P16. Software Wizard guides you through software selection and installation. In addition to multimedia demonstrations, product data sheets, and video clips, the Software Suite contains the following power management software: LanSafe Network UPS shutdown and monitoring software PowerVision (30-day trial version) UPS performance analysis and monitoring software Foreseer (demonstration) facility and data center management software
Software Application Powerware Extensions for Application LanSafe NetWatch IBM Director Single pseries (serial/tty) non-lpar Single pseries (network) non-lpar * * Single pseries (LPAR) * Multiple pseries (non-lpar) * Multiple pseries (LPAR) * IBM Director Network Device * * Co-requisite FC 2934 ConnectUPS Web/SNMP network card. Note: UPS for iseries applications utilize OS/400 UPS monitoring functions.
Software Comparison Ambient Email/ SSL/SSH 1 Temperature Application Monitoring Shutdown GUI SMTP Security Humidity LanSafe Yes Yes Yes Yes / Yes No/No No/No NetWatch - Yes - No/No No/No No/No ConnectUPS Web/ Yes 2 Yes 3 Yes Yes / Yes Yes / Yes Yes / Yes 4 SNMP Card (FC 2934) 1 SSL = Secure Sockets Layer. SSH = Secure Shell. 2 Via Web Browser, LanSafe or Network Management System (e.g. IBM Director, Tivoli). 3 In conjunction with NetWatch software. 4 With optional FC 2938 EMP (Environmental Monitoring Probe) device attached.
Connectivity What you need by application Software Solution zseries iseries pseries xseries Storage Networking LanSafe LanSafe and ConnectUPS MultiServer card (IBM FC 2933) NetWatch and ConnectUPS! Web/SNMP card (IBM FC 2934) LPARs Powerware Extensions for IBM Director NetWatch ConnectUPS Relay card and AS/400 cable (IBM FC 2936)! Use ConnectUPS Web/SNMP/xHub card, IBM FC 2934 to support LPAR (POWER 4 Chip Set) servers. For pseries configurations, each LPAR needs a network connection and will install Powerware provided NetWatch or LanSafe software.
P11 and P16 Collateral Additional information available at www.powerware.com/ibm Select your region. Click Products, click 9910 Solutions then click Powerware pseries or Powerware iseries Powerware UPS Hotline for IBM 1-800-925-4426 Materials available Data sheet Application overview chart Product presentation Documents (manuals)