1 Источники питания
Philips Lighting OEM Product information sources 2
Downloads & more Xitanium drivers OEM Technical downloads OEM Technical downloads (IP67 Family) Datasheets, Certificates, CAD files Design-in guides Leaflets Philips Easy Design-in Tool (EDIT) Driver-Module combination selection tool Create your ideal configuration in a minute! 3 Philips Multione Quick drivers programming and setting Also for analysis, diagnostics of the devices. Before downloading this software you need to request a User Software Key.
LED drivers Two brands Xitanium LED drivers CertaDrive LED drivers Enable future proof LED technology Reliability Configurability maximum flexibility and differentiation Sometimes good can be great! Good quality at basic specifications for high volume LED business 4
Xitanium для офисного применения Специально для Российского рынка Особенности Срок службы 50 000 ч (@ Tc 75 C) Рабочий диапазон температур: -20 C - + 50 C Низкий коэффициент пульсаций Сертификаты: EAC/CE/ENEC Преимущества Возможность установить 2 значения вых.тока 300 и 350мА при допуске±5% Гальваническая развязка Коэффициент пульсации 4% Гарантия 5 лет Description 12NC Isolated Dimming Output Voltage Uout max AOC Dimension Xitanium 40W 0.35A 115V 230V 929001402906 Yes No 80-115 Vdc 120V нет 211x40x30 New!Январь 2019 New!Январь 2019 Xitanium 40W 0.3/0.35A 115V 230V 929001487706 Yes No 70-115 Vdc 120V Переключатель тока 211x40x30 Xitanium 52W 0.3/0.35A 115V 230V 929001487806 Yes No 100-150 Vdc 170V Переключатель тока 211x40x30 5 211x40x30 Фото: образец новых драйверов, не конечный продукт
Xitanium ixt industry linear driver Robust LED drivers for industry applications Performance Features Longer lifetime 100K hrs @ Tc 75 C Improved surge (4kV) Wide temperature reach: -40 C to +60 C SimpleSet technology Low ripple for camera and scanner friendly operation Central DC operation Benefits High reliability underpinned by 5 year warranty High voltage systems for highest efficiency and lowest cost Future-proof flexibility Compatibility Description 12NC Isolated Dimming Output Voltage Uout max AOC Dimension New! Xitanium 300W 0.5-1.4A 300V ixt TD 230V 929001608406 No TD 100-300 Vdc 300V Programmable, SimpleSet, LEDSet 360x50x28 Xitanium 150W 0.2-0.7A 300V ixt TD 230V 929001516506 No TD 100-300 Vdc 330V Programmable, SimpleSet, LEDSet 360x30x21 Xitanium 100W 0.15-0.5A 300V ixt TD 230V 929001516406 No TD 100-300 Vdc 330V Programmable, SimpleSet, LEDSet 360x30x21 Xitanium 150W 0.2-0.7A 300V 230V ixt 929001506706 No No 100-300 Vdc 330V SimpleSet, LEDSet 360x30x21 Xitanium 100W 0.15-0.5A 300V 230V ixt 929001506606 No No 100-300 Vdc 330V SimpleSet, LEDSet 360x30x21 6 360x30x21
Xitanium SR industry linear driver Robust SR LED drivers to create connected industry systems Statement Features SR technology Longer lifetime 100K hrs @ Tc 75 C Improved surge protection (4kV) Wide temperature reach: -30 C to +60 C SimpleSet technology Low ripple for camera and scanner friendly operation Central DC operation Benefits Integrated power supply over DALI 2.0 to power sensors and wireless radios directly from the driver, open spec for all OEMs, simplifying integration of sensors into the luminaire High reliability underpinned by 5 year warranty Future-proof flexibility Compatibility Description 12NC Isolated Dimming Output Voltage Uout max AOC Dimension Xitanium 150W 0.2-0.7A 300V SR 230V ixt 929001540906 No SR 100-300 330V Programmable, SimpleSet, LEDSet 425x30x21 Xitanium 100W 0.15-0.5A 300V SR 230V ixt 929001540806 No SR 100-300 330V Programmable, SimpleSet, LEDSet 425x30x21 425x30x21 7
Xitanium SR linear driver SR LED drivers to create connected systems Features SR technology Lifetime 100K hrs (@ Tc 75-10 C) Wide temperature reach: -25 C to +50 C SimpleSet technology Low ripple for camera and scanner friendly operation Central DC operation 360x30x21 Benefits Integrated power supply over DALI 2.0 to power sensors and wireless radios directly from the driver, open spec for all OEMs, simplifying integration of sensors into the luminaire High reliability underpinned by 5 year warranty Future-proof flexibility Compatibility Statement Description 12NC Isolated Dimming Output Voltage Uout max AOC Dimension Xitanium 100W 0.25-0.7A 220V SR 230V 929001540706 No SR 50-220 Vdc 250V Programmable, SimpleSet, LEDSet 360x30x21 Xitanium 60W 0.08-0.35A 220V SR 230V 929001540506 No SR 50-220 Vdc 250V Programmable, SimpleSet, LEDSet 360x30x21 Xitanium 60W 0.08-0.35A 300V SR 230V 929001540606 No SR 100-300 Vdc 330V Programmable, SimpleSet, LEDSet 360x30x21 Xitanium 35W 0.08-0.35A 150V SR 230V 929001540406 No SR 50-150 Vdc 180V Programmable, SimpleSet, LEDSet 360x30x21 Xitanium 75W 0.7-2.0A 54V SR 230V 929001505006 Yes SR 27-54 Vdc 60V Programmable, SimpleSet, LEDSet 360x30x21 Xitanium 36W 0.3-1A_54V SR 230V 929001516306 Yes SR 27-54 Vdc 60V Programmable, SimpleSet, LEDSet 360x30x21 Description 12NC Isolated Dimming Output Voltage Uout max AOC Dimension Xitanium SR Bridge built-in 929001546406 No Xitanium SR Bridge independent 929001546506 No 8
Светодиодные драйверы для наружного и промышленного освещения (IP67) 9
Xitanium drivers Различные семейства для различных потребностей Standalone solutions Connected solutions Xtreme FULL Prog Максимальн ая гибкость Настройка через SimpleSet Встроенное управление (DynaDimmer, CLO) Универсальный интерфейс (DALI) Управление группой (LineSwitch/AmpDim) Полная диагностика Xtreme Sensor Ready Connected Настройка через SimpleSet SR интерфейс и питание 24В Точное измерение электроэнергии Accurate Energy Metering Встроенное управление Расширенные возможности диагностики Xtreme LITE Prog Ограниченый набор функций Настройка через SimpleSet Базовое управление (DynaDimmer, CLO LITE) 1-10В или LineSwitch Базовая диагностика Xtreme Single Current Минимальн ая цена Одиночное значение тока 1-10В 10
Xitanium Xtreme drivers Xi FP 150W 0.2-0.7A SNLDAE 230V S240 sxt 11 Защита sxt = 100т.ч, Защита 10кВ/6кВ Корпус Входное напряжение: I220, S175, C150, S240, (I= IP76, S= Stretched, C=Compact, ### = length) 230V = 220-240V Функции: S = SimpleSet N = NTC input L = LineSwitch 1 = 1-10V interface D = DALI Interface A = AmpDim E = DC Emergency M = Energy Metering P = Auxiliary Power supply Дипазано выходного тока на модуль: Power: Output current range (Operating range in Amp for performance) Output Power (max) Семейство драйверов: No Indication = Single Current (одиночное значение тока) LP (LITE Prog) = Драйвер оконного типа (AOC, CLO LITE, DynaDimmer) FP (FULL Prog) = Драйвер оконного типа(aoc, CLO, DynaDimmer) SR (Sensor Ready) = Драйвер оконного типа (AOC, DALI-SR, CLO, DynaDimmer) Тип драйвера: Xitanium (Xi)
Xitanium Xtreme drivers IP67 Особенности и преимущества Особенность Преимущество Xitanium single Xitanium single Xitanium Lite Prog Benefit Xitanium current s. current Xitanium current lite prog Xitanium full prog (TWE) Reliable Надежность Долгий срок службы: < 10% отказов 100 000 50 000 100 000 100 000 Xitanium AOC (Adjustable Output current) Защита от перенапряжения CM / DM 4/ 4 kv 4 / 4 kv 10 / 6 kv 6 / 4 kv Номинальное входное напряжение 220-240 110-277 220-240 220-240 Гибкость SimpleSet & AOC, окно до 1.5A SimpleSet Потенциометр Flexible DynaDimmer 5-step Ограничение температуры драйвера (DTL) Управление 1-10В X X X LineSwitch Connected Возможность создания сети DALI 2.0 SR интерфейс & 24V дополнительное питание 12 Точное измерение энергии(1%) Обновлние FW через SR (OTA) Диагностика Full
Xitanium drivers IP67 портфолио 2018 Мощность & Корпус (Ixxx= I - IP67, xxx- длина копуса, IxxxC = I - IP67, xxx- длина копуса,c - коннектор) Xitanium Single Current Xitanium Single Current (TWE) Xitanium Lite Prog 150W I220/I220C 150W I175/I175C 100W I220/I220C 100W I175/I175C 75W I175 65W I160 Q4 `18 40W I160 Q1 `19 25W I160 13
Xitanium drivers IP67 портфолио 2018 Мощность & Корпус (I= IP66/67 без коннектора, IxxxC = IP66/67 c коннектором) Single Current Single Current (TWE) Lite Prog Xitainum AOC 250W I240 220W I220/I220C/I230/ I230C/I240C Версия без коннектора 200W I250 185W I220 150W I165C/I220 100W I165C/I220 Версия с IP коннектором 14
Customer oriented More flexibility with different cable length Accessory (Output side) Accessory (1-10V Dim side) Outdoor Independent Driver (Connector version) Accessory (Input side) 15
Accessories- Connector 12NC Description Weight (kg) Qty/ box (PCS) Cable length (cm) Connected with Driver 929001460180 Connector WP F30 Input 0.0394 300 30 Input side 929001460280 Connector WP F60 Input 0.0643 250 60 Input side 929001460380 Connector WP F90 Input 0.0891 200 90 Input side 929001460480 929001460580 929001460680 Connector WP M30 Output Connector WP M60 Output Connector WP M90 Output 0.0327 300 30 Output Side 0.0533 250 60 Output Side 0.0738 200 90 Output Side 929001460780 Connector WP M30 1-10V 0.0327 300 30 1-10V Dim 16
Светодиодные драйверы для наружного освещения IP20 FULL & LITE Programmable 17
Xitanium Xtreme drivers Уникальные преимущества и особенности Долгий срок службы 100,000 ч <10% отказов Встроенные функции диммирования: DynaDimmer, CLO,.. Защита 10кВ CM и 6кВ DM Цифровые и аналоговые выходы DALI, 1-10В Легкое проектирование светильников ЭМС, клеммы Просто шаговое иммирование с LineSwitch Высокая эффективнос ть до 93% Легкая настройка и программирова ние SimpleSet 18
Xitanium basic programmable 12W S 230V C100 19 1 9 Easy fixture integration Very compact size, fitting with a wide range of lower lumen outdoor luminaires Configurable operating window (AOC) Easy to design-in based on good thermal and EMI behavior Designed and released for Class I & II systems SELV isolated Easy and fast wireless programming via SimpleSet Compatible with MultiOne Basic for fast and efficient current setting Reliable Robust design: withstanding harsh Outdoor conditions against moisture, vibration and temperature Surge protection 6 / 4 kv (CM / DM) Lifetime up to 100,000 hours Ambient temperature ranging from -40 to + 55 deg C. Optimized for Philips SLM and other chip on board LED s Total Cost of Ownership Low initial cost via a global platform design Lower maintenance costs due to long lifetime and high survival rate 5 years warranty
Основные характеристики Driver type Power & Housing Output Current Dimming (Interface) Lifetime Surge Protection (CM/DM) Xi BP 12W 0.1-0.5A S 230V C100 12W, C100 0.1-0.5A Non dimmable 100k Hrs, >90% survivors 6 kv / 4 kv Software features Type SimpleSet AOC Dyna Dimmer ALO DALI CLO OWP MTP AmpDim DTL Diagnostics BASIC Prog versions Yes Yes - - - - Yes - - - - 20 2 0
Xitanium Xtreme drivers IP20 Особенности и преимущества Особенность Преимущество Xitanium s. current Xitanium lite prog Xitanium full prog Xiantium SR Benefit Надежность Долгий срок службы: 100,000 ч < 10% Xitanium s. current X Xitanium lite prog X Xitanium full prog X Xiantium SR X Reliable отказов Защита от перенапряжения CM / DM 4/ 4 kv new 10 / 6 kv new 10 / 6 kv 8 / 6 kv Защита сетевого new X X X Димиирование при аварийном 150W 165W X X режиме DC Flexible Гибкость SimpleSet & AOC, окно до 1.5A X X X DynaDimmer 5-step 5-step 5-step Ограничение температуры драйвера (DTL) Управление 1-10В X X new new X new X Connected LineSwitch (шаговое диммирование) SL X DALI 2.0 X X Возможность создания сети SR интерфейс & 24V дополнительное питание X 21 Точное измерение энергии(1%) Обновлние FW через SR (OTA) Диагностика Full Full Extended new X X
Drivers Xtreme LED Power & Housing (C = Compact, S = Stretched) New introductions Xitanium Xtreme LED Drivers Xtreme Single Current / Dimm. Xtreme Lite Programmable Xtreme Full Programmable = Available = New launch / Upgrade Xitanium SR 330W C240 10kV 165W C170 10kV 10kV 165W 2019 Q1 Upgrade Upgrade 110W C150 to C133 110W 2018 Q4 2018 Q3 10kV 75/100W C165 75W 10kV 70W C150 8kV 75W C133 75W + 110W 2018 Q3 10kV 75W (C150) 2018 Q4 40W C123 40W 2018 Q4 10kV 10kV C133 22W C123 12W 2018 Q3 22W 2019 tbd 10kV 10kV 12W & 22W in C133 250W Q-can / I220 100W*/150 W S240 / Y * 10kV 10kV 65W*/75W S240 / I220 * 10kV 10kV 40W S175 10kV 10kV 22 22W S175 10kV 10kV
23 Xitanium Xtreme drivers SimpleSet: Simply touch to configure
Xitanium Xtreme drivers FULL/LITE Programmable Programmable feature set Xitanium LITE Programmable Xitanium FULL Programmable 24 1-10V settings Adjustable Output Current (AOC) Constant Light Light Output (CLO LITE) Driver Temperature Limit (DTL) DynaDimmer Adjustable Light Output (ALO) AmpDim (Mains Dimming) Adjustable Output Current (AOC) Constant Light Output (CLO) DC-Emergency Driver Temperature Limit (DTL) DynaDimmer End Of Life Indication (EOL) Light Source Age LineSwitch Module Temperature Protection (MTP) Startup Timer (Smooth light level start)
Xitanium Xtreme drivers FULL/LITE Programmable Constant Light Output (CLO) Xitanium LITE Programmable Xitanium FULL Programmable Linear version of Constant Light Output Configurable planned max. working time (hrs) Configurable initial power level (%) 16 steps programmable of Constant Light Output Deafault or customizabe linear schedule Logarithmic or free form creation 25
Xitanium Xtreme drivers FULL Programmable Module Temperature Protection (MTP) Xitanium LITE Programmable Xitanium FULL Programmable To protect your module against over-heating Free choice to select the used NTC type Set temperature the MTP starts to dim Set minimum light level NTC use will remain as feature for the Xi FP drivers 26
Xitanium Xtreme drivers FULL/LITE Programmable Driver Temperature Limit (DTL) Xitanium LITE Programmable (potted) Xitanium FULL Programmable (potted) Driver Temperature Limit feature allows configuration of temperature levels for Start dimming Stop dimming (also lowest light level can be set) Shut down temperature at which the dim level is set to zero 27
Xitanium Xtreme drivers FULL/LITE Programmable DynaDimmer Xitanium lite programmable (earlier 2-step) Xi LP (upgraded) + Xi FP programmable 2 step DynaDimmer LITE - configurable start and end time - configurable dim level 5 step Dynadimmer - configurable start and end time - configurable dim level - ability to complete switch-of light Time based or learned midnight point can be selected as a reference for timekeeping. Midnight shift to compensate for location 28 Note: without switch-off for upgraded Xi LP drivers
Xitanium Xtreme drivers FULL Programmable LineSwitch (Step dimming / Sensor) Xitanium LITE Programmable Xitanium FULL Programmable LineSwitch High / Low level Sensor Integrated switch-off relay Smooth light Fade-on / Fade-down timing 29
Xitanium Xtreme drivers FULL Programmable AmpDim (Mains dimming) Xitanium LITE Programmable Xitanium FULL Programmable For use with conventional mains dimming system, cabinet-based dimming without the need for additional control wires or infrastructure changes Set the voltage level the fixture should start to dim light Set dim level at lowest mains voltage AmpDim works with constant amplitude reduction and no sinewave waveshape modification 30 30
Xitanium Xtreme drivers FULL Programmable DC Emergency (Central Emergency) Xitanium LITE Programmable Xitanium FULL Programmable To use your fixture on central emergency lighting Driver will automatically switch to the configured output di level if DC mains (Battery-mode) is detected. 31
Xitanium Xtreme drivers FULL/LITE Programmable Mains guard This built-in Mains guard feature prevents dark spots when the 220-240V mains voltage drops below normal conditions. To protect the luminaire and the installation from 180V onwards the output power will be limited. Xitanium FP drivers Mains guard works even down to 90 Volt, output power will be limited down to 10%. (see graph) Mains guard feature will take care the mains current will never exceed 130% of the nominal current at 230V. Benefits for customers Light will remain on even at extreme low mains voltage (no dark spot) Luminaire is fully protected against under voltage The max input current will be limited to max 130% and therefore prevents over-current in the installation and tripping of MCB or fuses. Mains guard is implemented in all Xi FP drivers with production date 1636 or later Also implemented in upgraded Xi LP drivers 32
Xitanium Xtreme drivers FULL/LITE Programmable Diagnostics overview Xitanium FULL/upgraded LITE Programmable Diagnostics read out via SimpleSet for Xi LP drivers via SimpleSet or DALI for Xi FP drivers Diagnostics includes: System information: System burning hours, # system starts, Temperatures, Mains voltage In-field fault finding: LED board defect, NTC, Driver temperature Long period recording displayed in histogram for diagnostics Diagnostic LED module voltage (V) LED module current (ma) LED module dim level (%) LED module temperature (ºC) Driver temperature (ºC) System starts System on time (h) Module on time (h) Module energy consumed Short circuit Open circuit Module NTC missing Module temperature reduction active Module temperature too high Mains too low Adjustable Startup Time active 33
Xitanium Xtreme drivers FULL/LITE Programmable Diagnostics overview Xitanium FULL/upgraded LITE Programmable Diagnostic LED module voltage (V) LED module current (ma) LED module dim level (%) LED module temperature (ºC) Driver temperature (ºC) System starts System on time (h) Module on time (h) Mains overvoltage count Module energy consumed Short circuit Open circuit Module NTC missing Module temperature reduction active Module temperature too high Mains too low Adjustable Startup Time active 34
Dynadimmer overview 3 35
Xitanium Xtreme drivers Dynadimmer Dynadimmer overview 1/4 Dynadimmer is an autonomous dimming control developed by Philips that enables simple, pre-programmed customized multistep dimming. Xi FP: up to five configurable steps, incl. light turn-off Xi LP (upgraded): up to five configurable steps, light turn-off not supported Xi LP (earlier/not upgraded): one configurable step, light turn-off not supported During Dynadimmer operation the other dimming interface functionalities will be ignored but override is possible in the following ways: Xi FP - via DALI - as soon as the driver detects a DALI frame it will change over from Dynadimmer mode to DALI mode and remain in DALI mode until the next mains power cycle. Xi FP - via LineSwitch - overrule the Dynadimmer by applying mains voltage to the LineSwitch input ( high input), results in change over to full light output (only). As soon as the LineSwitch input is changed back to low, the Dynadimmer will resume operation. Xi LP SL - via LineSwitch - as above - note Xi LP SL drivers to be phased out. Xi LP S1 - via 1-10V interface by shorting the +/- terminals of 1-10V by a relay or pulling level below 2V by a controller. As soon as contact is opened or interface voltage raised above 3.2V, the Dynadimmer will resume operation. 36 36 Simultaneous use of Dynadimmer and 1-10V dimming is not possible. These are mutually exclusive.
Xitanium Xtreme drivers Dynadimmer Dynadimmer overview 2/4 Time based: starts executing the Dynadimmer profile as soon as power is applied to the driver does not compensate for seasonal changes best suited for applications with fixed power-on/off timing Mid-point/location based: Based on the average power-on time of the previous periods, the driver calculates a reference mid-point for the dimming schedule and uses it as a virtual clock. Relies on a regular power-on time from one night to the next. Typically based on sunset and sunrise and its duration will vary gradually throughout the seasons. Dynadimmer calculates the power-on time average of the 5 last preceding stable nights implying that after first installation, until virtual clock not calculated (3 nights), dimming schedule can not run, thus Dynadimmer will not dim the light output for the first 3 nights. Geographical location within a time zone will create difference in sunset and sunrise. This can effect correctness of the calculated virtual clock. To compensate this user can set his geographical location in both western (+) or eastern (-) direction. Sunset in: Lisabon 19:35 <----> Berlin 19:00 <----> Warsaw 18:25 37 37
Xitanium Xtreme drivers Dynadimmer Dynadimmer overview 3/4 Dynadimmer attention points Change in power-on time is more than one hour driver checks last 5 nights and if 3 identical on-times are found no re-sync. This prevents disruption of the Dynadimmer dimming behavior due to occasional mains black- and brownouts. Change in power-on time is less than one hour - represent normal operation. Driver will average the last three power-on times to calculate the virtual clock while gradually adapting dimming schedule to the new power-on time. Influence of mains interruption (blackout): If the mains voltage drops to zero for more than one second considers as a new night and will act as if on time changed more than 1 hour (looks for 3 in 5) If the mains voltage drops to zero for less than a second - Dynadimmer dimming cycle remains unaffected. Influence of mains voltage dip (brownout): The driver is robust enough to handle a mains voltage dip down to 25VAC for one minute without disruption of the Dynadimmer timing. Light output will be less or zero for the duration of the mains dip but the dimming schedule will not be affected. 38 38
Xitanium Xtreme drivers Dynadimmer Dynadimmer overview 4/4 Temporary mains power-off (maintenance at night, blackout): If power outage occurs within the first 4 hours of the night then a new night will be calculated on the remaining on-time. Average on-time before the outage will be used as reference thus regular dimming will result. If the power outage takes place after more than four hours and not closer than one hour before the expected end of the night then this deviating on-time will be taken into account to calculate the average power-on time of the five preceding nights. As average for 5 nights is taken it won t affect the dimming duration of the next night. If the outage takes place within one hour before the expected end of the night this will be taken into account as a valid night average power-on time and thus temporarily will affect the dimming behavior. 39 39 Temporary mains power-on (maintenance during the day): If the power-on time is less than four hours then this deviating power-on time will be ignored and the average power-on time before the deviation will be used as reference. No effect on dimming behaviour for next night. If the power-on time is more than four hours and at least one hour less than the average power-on time of the three preceding nights then this deviating power-on time will be taken into account to calculate the average on-time of the five preceding nights. However, it won t affect the dimming duration of the next night.
Xitanium Xtreme drivers Dynadimmer Dynadimmer overview final notes By default the mid position of a time zone will be selected; in most cases this default value will be accurate enough. The midnight shift option is of course not available when the Time based option has been selected. Dynadimmer does not compensate for the 1-hour shift in time due to daylight savings time changes in fall and spring. The Dynadimmer feature does not support 24h applications (e.g. tunnels, warehouses). A power off/on cycle is required every 24 hours. Dynadimmer operation is not supported when the driver is operated on a DC grid. 40 40
41
42 Surge protection
Lightning occurrence and location important to define level of surge protection During lightning storms ESD could be caused by dry air together with wind : TOV, ESD & Lightning events are the most critical for outdoor luminaires Surges induced by switching Rated impulse voltage withstand levels according IEC 60364-1 : Low voltage electrical installations Normal Network voltage Overvoltage (TOV) Levels and time expressed here are only indicative. In nature it might be higher. ms to S X time µs ns µs to ms 43
Surge protection class-i (in luminaire) Overview of differences between driver integrated surge protection and external SPD Diverting high CM surge currents (ka range) from the LED module and driver Diverting small CM surge currents through LED driver (10 100A range) from the LED module Xtreme Driver Rated discharge current (In) & number of pulses - - 3 ka DM (CM n.a.) min. 40 pulses Combined discharge Voltage (Uoc) Recommendation No Yes 10 kv CM, min. 20 pulses (insulation level) 8kV CM, min. 80 pulses (insulation level) 6 kv/3 ka DM min. 40 pulses (2 Ohm) Apply in case of low to medium exposure to lightning and inductive load grid switching External SPD Yes (additional protection) Yes (additional protection) 10 ka CM/DM min. 1 pulses 5 ka CM/DM min. 50 pulses 3 ka CM/DM min. 100 pulses 20kV/10kA CM min. 1 pulse (2 Ohm) 10 kv/10 ka CM min. 1 pulse (1 Ohm) Apply in case of medium to high exposure to lightning 44
Surge protection class-ii (in luminaire) Overview of differences between driver integrated surge protection and external SPD Diverting high CM surge currents (ka range) from the LED module and driver Diverting small CM surge currents through LED driver (10 100A range) from the LED module Xtreme Driver Rated discharge current (In) & number of pulses - - 3 ka DM (CM n.a.) min. 40 pulses Combined discharge Voltage (Uoc) Recommendation No Yes 10 kv CM, min. 20 pulses (insulation level) 8kV CM, min. 80 pulses (insulation level) 6 kv/3 ka DM min. 40 pulses (2 Ohm) Apply in case of low to medium exposure to lightning and inductive load grid switching External SPD No No 10 ka DM min. 1 pulses 5 ka DM min. 50 pulses 3 ka DM min. 100 pulses 20kV/10kA DM min. 1 pulse (2 Ohm) 10 kv/10 ka DM min. 1 pulse (1 Ohm) Apply in case of medium to high exposure to lightning 45
Surge protection class-i: installation level Class I Luminaire Pole Close to earth Conductive or not Source exposure Direct & Indirect lightning Static overvoltage Sensitivity* Low High No issue Default Solution (Philips standard) Xitanium driver (10kV CM / 6kV DM) Xitanium driver (10kV CM / 6kV DM) External SPD (type3 in luminaire) Philips SPD (Xtreme) Class-I Installation protection Cascading Protection (e.g. SPD type2 protected mast, SPD type 1 in cabinet) 46 * Dependig on flash density and uptime requirements
Surge protection class-ii: installation level Class II Luminaire Pole Close to earth Conductive Insulated Source exposure Direct and indirect lightning Static overvoltage Indirect lightning Static overvoltage Sensitivity* High No issue No issue High Default Solution (Philips standard) External SPD (type3 in luminaire) Installation protection Xitanium driver (10kV CM / 6kV DM) Philips SPD (Xtreme) Class-I + Connect SPD GND output to earth of the installation** (CM) Cascading Protection (e.g. SPD type2 protected mast, SPD type 1 in cabinet) Bleeder Resistors or other static discharging solution Bleeder Resistors or other static discharging solution Cascading Protection and bleeder resistors 47 * Dependig on flash density and uptime requirements ** Earth connection is only possible in few countries where the metallic mast must be interconnected to earth whatever the luminaire class is
White paper The challenges of surge protection Available now 48
49