Netw 3000 VLAN 1 LAB Darlene Redmond Ryan Gamblin January 19 th 2012
3. Attach a workstation to the Management VLAN and demonstrate a successful login to the switch at the privileged exec mode, with a session transcript or screenshot.
4. Explain the purpose of VLAN 1: The default VLAN assigned to the switch is VLAN 1. It s basically the landing zone or non usable zone for all ports that are not assigned to other VLAN s. 5. Detail the requirements to communicate between devices on the same VLAN: All hosts that are on the same network address and subnet are able to connect to the ports assigned to the same VLAN. 6. Detail the requirements to communicate between devices on the same VLAN: All host addresses are supposed to be assigned to there designate networks which are assigned to their VLAN s. Support of the Layer 3 switching or have a router connected (attached) to the switch, enables the switch to communicate. 7. What is the effect on L2 broadcasts when a switch is segment into VLAN S: The L2 broadcasts have limitations with there designated VLAN S and are not to transverse the network through their respective VLAN. 8. Provide a listing of the switch configuration in your report: DCRSW#show run Building configuration... Current configuration : 1762 bytes version 12.1 no service timestamps log datetime msec no service timestamps debug datetime msec no service password-encryption hostname DCRSW username admin privilege 15 password 0 secret interface FastEthernet0/1 switchport access vlan 10 interface FastEthernet0/2 switchport access vlan 10 interface FastEthernet0/3
interface FastEthernet0/4 interface FastEthernet0/5 switchport access vlan 20 interface FastEthernet0/6 switchport access vlan 20 interface FastEthernet0/7 interface FastEthernet0/8 interface FastEthernet0/9 switchport access vlan 30 interface FastEthernet0/10 switchport access vlan 30 interface FastEthernet0/11 interface FastEthernet0/12 interface FastEthernet0/13 switchport access vlan 40 interface FastEthernet0/14 switchport access vlan 40 interface FastEthernet0/15 interface FastEthernet0/16 interface FastEthernet0/17 interface FastEthernet0/18 interface FastEthernet0/19
interface FastEthernet0/20 interface FastEthernet0/21 switchport access vlan 100 interface FastEthernet0/22 switchport access vlan 100 interface FastEthernet0/23 switchport access vlan 99 interface FastEthernet0/24 interface GigabitEthernet1/1 interface GigabitEthernet1/2 interface Vlan1 no ip address shutdown interface Vlan99 ip address 192.168.0.250 255.255.255.0 banner motd ^C Ryan.C.Gamblin W0195823 ^C line con 0 line vty 0 4 password cisco login local line vty 5 15 password cisco login local End DCRSW#show vlan
VLAN Name Status Ports ------------------------------------ ---------------------------------------- 1 default active Fa0/3, Fa0/4, Fa0/7, Fa0/8 Fa0/11, Fa0/12, Fa0/15, Fa0/16 Fa0/17, Fa0/18, Fa0/19, Fa0/20 Fa0/24, Gig1/1, Gig1/2 10 Vendor1 active Fa0/1, Fa0/2 20 Vendor2 active Fa0/5, Fa0/6 30 Vendor3 active Fa0/9, Fa0/10 40 Vendor4 active Fa0/13, Fa0/14 99 Management active Fa0/23 100 DCR active Fa0/21, Fa0/22 1002 fddi-default act/unsup 1003 token-ring-default act/unsup 1004 fddinet-default act/unsup 1005 trnet-default act/unsup VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2 ------------------- ----------------- -------------------- ------ ------ 1 enet 100001 1500 - - - - - 0 0 10 enet 100010 1500 - - - - - 0 0 20 enet 100020 1500 - - - - - 0 0 30 enet 100030 1500 - - - - - 0 0 40 enet 100040 1500 - - - - - 0 0 99 enet 100099 1500 - - - - - 0 0 100 enet 100100 1500 - - - - - 0 0 1002 fddi 101002 1500 - - - - - 0 0 1003 tr 101003 1500 - - - - - 0 0 1004 fdnet 101004 1500 - - - ieee - 0 0 1005 trnet 101005 1500 - - - ibm - 0 0 Remote SPAN VLANs ------------------------------------------------------------------------------ Primary Secondary Type Ports ---------------- ----------------- ------------------------------------------