V1.0 Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with a dry cloth. 7) Do not block any ventilation openings, install in accordance with the instructions. 8) Do not install near any heat sources such as radiations, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not alter the safety purpose of the polarized plug. If the provided plug does not fit into your outlet, consult an electrician for replacement. 10) Only use attachments/accessories specified by the manufacturer. 11) Unplug this apparatus during lighting storms or when unused for long periods of time. 12) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as damage to the power-supply cord or plug, liquid or other objects have entered the apparatus, the apparatus has been exposed to rain or moisture, the apparatus does not operate normally, or has been dropped. 13) The ventilation openings should be free at all times. Do not cover the ventilation openings with items, such as newspapers, tablecloth, curtains, etc. - 1 -
14) Do not place items or open flames (candles, etc) on this apparatus. 15) Attention should be drawn to the environmental aspects of battery disposal. 16) Use this apparatus only in moderate climates. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. WARNING: The batteries should not be exposed to excessive heat such as direct sunlight, fire or other heat sources. CAUTION: Should the apparatus be exposed to electrostatic electricity, it may malfunction and may require a reset. - 2 -
Tips regarding environmental protection At the end of its operating life, this product may not be disposed of by way of your normal household waste. Instead, it must be delivered to a collection point for recycling electrical and electronic equipment. The icon on the product, in the operating instructions or on the packaging, indicates this. The materials used in manufacturing this product are recyclable, depending on their identifying markings. By recycling this equipment, by recycling its components, or through other procedures of re-using outdated equipment, you are making an important contribution to the protection of our environment. Please ask you local municipal administration for the location of the corresponding recycling point. Battery Recycling In order to ensure the environmentally friendly disposal of batteries, please do NOT dispose of used batteries through normal household waste. Please take the batteries to your local retail or community collection point for recycling. The following may be an indication of a discharged battery: The device cannot be switched on. The device switches off automatically and "Battery Empty" is shown in the display. The device and or battery do not function properly. - 3 -
Support URL: http://www.odys.de See our website for the latest information concerning this product, other products manufactured by our company and our company itself. If you have questions or problems, please read the FAQs on our website or contact our customer support service center: support@odys.de. Manufacturer Axdia International GmbH Formerweg 9 D-47877 Willich (Germany) Tel: +49(0) 2154 / 8826-0 Fax: +49(0) 2154 / 8826-100 Support-Hotline: +49 (0)2154 / 8826-101 Web: www.odys.de E-Mail: info@axdia.de - 4 -
Appropriate use Device is designed for playing music in commonly used formats and transferring sound from a Music or Sound source to its speakers using a cable or Bluetooth connection. It is exclusively meant for this purpose and must only be used for the same. This also includes paying attention to all information contained in this operating manual, especially in the safety instructions. Any other usage is considered to be improper and may lead to material damages and even personal injuries. Moreover, it will result in the immediate loss of guarantee. The manufacturer does not bear any liability for damages caused due to improper use.this manual may not reflect your actual device s operation. All information is subject to change without prior notification. Please follow your actual device s operational procedures. - 5 -
Content 1 Conformity... - 7-2 Specifications... - 7-3 Package Content... - 7-4 Battery Charging... - 8-5 Main Unit... - 9-6 Holder for Tablet / Smartphone... - 10-7 Key description... - 11-8 Bluetooth pairing... - 12-9 Connecting with other devices (AUX)... - 13-10 Pairing using NFC... - 13-11 Trouble Shooting... - 15-12 Warranty condition... - 17 - - 6 -
1 Conformity We, Axdia International GmbH, hereby declare that this device corresponds to the basic requirements and relevant regulations outlined in guideline 1999/5/EG. The CE declaration of conformity for this product may be found on the following link: www.odys.de Service Downloads (http://www.odys.de/web/downloads_de.html) 2 Specifications 1) Compatible with bluetooth devices and other devices containing AUX output connections. 2) Easy operation using the buttons located on the top of the device. 3 Package Content, Manual, USB Cable - 7 -
4 Battery Charging The device has a built-in rechargeable battery. No extra battery installation is required. Just charge the device when it indicates low battery. To charge the battery, connect the device to your pc using an USB Cable or a power cable which is also used for Smartphone. It takes about 3 hours to fully charge the battery. The charging indicator is light up while the battery is charging and turns off when the device is fully charged. Note: a. You can operate the device even when it is being charged. But for extended battery life, it is suggested NOT to use the device when it is charging. b. It is recommended to charge the battery before you use the device for the first time. c. For maximum performance, lithium-ion batteries need to be used often. If you don t use the device often, be sure to recharge the battery at least once per month. - 8 -
5 Main Unit Front side view: Tablet-Holder Function key Aux lights up, while connected Backside view: Charging indicator lights up while charging and turns off afterwards Bluetooth-Status Fast flashing: Not connected Slow flashing: Connected Power switch 3.5 AUX Input Micro USB connector to charge the internal battery - 9 - Stand for tablets
6 Holder for Tablet / Smartphone You can place Tablets or Mobile Phones into the holder at the top of this device. Note The holder is only designed to store the devices. It has no technical function. Caution! Please use the stand at the backside necessarily if you want to place heavier or larger devices to prevent to tilt the devices. 1. 2. Pull the stand out of the backside compartment until it has a 90 angle to the backside. - 10 -
7 Key description On/Off Switch: Push the On/Off switch to the right into On position to turn on the device. Push the switch back to the left into the position Off to turn the device off again. Function key : During Music playback 1x short press Play / Pause 1x long press Disconnect from Bluetooth Calls 1x short press 2x fast short press 1x long press Answer / End call Dial the last called number again Deny incoming call Important: The device will turn off automatically after 5 Minutes without a connection. Use the On/Off switch to turn on again. - 11 -
8 Bluetooth pairing This unit can receive stereo audio signal from a Bluetooth stereo audio source device. 1. Power on the unit. 2. LED indicator rapid flashing. 3. Enable the Bluetooth of the Bluetooth audio source device. 4. Pair and connect to ODYS Xound on the audio source device. 5. Pairing successful (indicator is slow flashing), ready to stream music. Note: Pairing the playback device with the ODYS XOUND is only possible when the ODYS XOUND is in the pairing mode and the LED is flashing. The above are generic steps to pair a BLUETOOTH device, for more specific instructions on BLUETOOTH connectivity for your device, please consult your manufacturer s manual. - 12 -
9 Connecting with other devices (AUX) 1. Connect the Aux in jacks on the unit to audio source, for example, MP3 Player or DVD player with an RCA cable. 2. Power on the unit and the audio device. 4. Use the native controls on the connected audio device to begin playing music through the connected unit. 10 Pairing using NFC Using an NFC compatible bluetooth device, you can establish a bluetooth connection by just touching the player with it. Note Make sure bluetooth and NFC function is enabled on your device. Please note that some kind of protection cover could prevent the use of NFC. Please use the standard Bluetooth pairing in this cases. 1. Power on this unit. 2. LED indicator rapid flashing. 3. Turn on the NFC and Bluetooth function on your device. - 13 -
4. Touch the marked NFC sensing area at the side of this device with your device, the player will pair and connect with your device. NFC 5. Touch this area again, the player will disconnect the bluetooth connection. - 14 -
Note: Some NFC-enabled mobile devices cannot pair directly with the player via NFC, please try either one of the solutions below: Please download the Apps Tap-and- Pair from Google Play Store (https:// play. google.com) and install. Pair with the player manually first, then touch again on the NFC sensing area. 11 Trouble Shooting Symptom Possible Cause Solution No Sound at 1. The unit is not 1. Follow the manual to Bluetooth connected with the connect the audio source mode. audio source device. device to the unit. 2. The unit is placed out 2. Relocate the unit within of the range Bluetooth operating 3. The volume has been range. muted or is on the 3. Adjust the volume level. minimum setting. - 15 -
Sound is distorted at Bluetooth/AU X modes. No sound at AUX modes. Sound source is distorted. If the original sound source of the external device is poor quality or with distortion and noise, it will be easily noticed with highpower speakers. Try a different audio source such as a music CD. 1. The unit is not 1. Follow the manual to connected the external reconnect the audio appliance properly. appliance to the unit. 2. The volume has been 2. Adjust the volume level. muted or is on the minimum setting. - 16 -
12 Warranty condition The following conditions comprise the requirements and scope of our warranty conditions and do not affect our legal and contractual warranty obligations. We offer a warranty on our products in accordance with the following conditions: 1. ODYS products are covered by a 24 month warranty. We will resolve damages or defects on ODYS products free of charge within 12 months of the purchase date under the following warranty conditions. For any damage or defect determined later than 12 months after the purchase date, proof of a manufacturing fault must be submitted for repair under warranty. The warranty does not cover batteries and other parts, which are considered consumables, parts that break easily such as glass or plastic or defects based on normal wear and tear. There is no warranty obligation in the event of marginal differences compared to the target appearance and workmanship provided these have a negligible effect on the product's fitness for use, in the event of damage caused by chemical or electrochemical effects, by water or generally from abnormal conditions. 2. The warranty will be performed in such a way that we shall decide whether to repair the defective parts or to replace them with working parts free of charge. AXDIA reserves the right to exchange the product for a replacement product of equal value if the product that is sent in cannot be repaired within a reasonable time or at reasonable cost. The product can also be exchanged for a different model of the same value. - 17 -
Requests cannot be made for repairs to be carried out on site. Parts that have been replaced or exchanged become our property. 3. The warranty claim does not apply if repairs or other work is carried out by unauthorized persons or if our products are equipped with additional parts or accessories that are not approved for our products. 4. Warranties that have been activated do not cause the warranty period to be extended, nor do they trigger a new warranty period. The warranty period for any replacement parts installed ends with the warranty period for the entire product. 5. Any other or further claims are excluded, especially those for replacement due to damage caused outside of the product, provided there is no obligatory legal liability. We therefore accept no liability for accidental, indirect or other consequential damage of any kind, which leads to usage restrictions, data loss, loss of earnings or interruption to business. Asserting a warranty claim 1. To make use of the warranty service, you must contact the AXDIA Service Center by e-mail, fax or phone (see below for contact details). You can also use the service form on our website or on the back of the warranty conditions. 2. AXDIA Service Center will try to diagnose and solve your problem. If it is determined that a warranty claim exists, you will be given an RMA number (Return Material Authorization) and you will be asked to send the product to AXDIA. - 18 -
IMPORTANT: AXDIA will only accept parcels that have an RMA number. Please observe the following when sending the product: 1. Send the product suitably packaged with carriage and insurance paid. Do not enclose any accessories with the products (no cables, CD's, memory cards, manuals, etc.), unless the AXDIA Service Centre specifies otherwise. 2. Mark the RMA number on the outside of the package in such a way that it is visible and clearly legible. 3. You must enclose a copy of the sales slip as proof of purchase. 4. Once AXDIA has received the product, it will meet its warranty obligations in accordance with the warranty conditions and will return the product to the sender with carriage and insurance paid. Service outside of warranty AXDIA can refuse any service claim made that is not covered by the warranty. If AXDIA agrees to provide a service outside the warranty, the customer will be invoiced for all repair and transport costs. AXDIA will not accept any packages that have not first been approved by AXDIA by means of an RMA (Return Material Authorization). - 19 -