MPC7410 RISC Microprocessor Hardware Specifications Addendum for the MPC7410TxxnnnLE Series

Similar documents
SGTL5000 I 2 S DSP Mode

Design Recommendations to Implement Compatibility Between the MC13783VK and the MC13783VK5

MPC5200(b) ATA MDMA, UDMA Functionality BestComm Setup Recommendations

Updating the Firmware on USB SPI Boards (KITUSBSPIEVME, KITUSBSPIDGLEVME)

MC56F825x/MC56F824x (2M53V) Chip Errata

Utilizing Extra FC Credits for PCI Express Inbound Posted Memory Write Transactions in PowerQUICC III Devices

MTIM Driver for the MC9S08GW64

Upgrade the Solution With No Changes 2 Upgrade the Solution With No Changes If a Codebase does not contain updates to its properties, it is possible t

MPR121 Jitter and False Touch Detection

PCB Layout Guidelines for the MC1321x

MPC8349E-mITX-GP Board Errata

PowerQUICC HDLC Support and Example Code

MC33696MODxxx Kit. 1 Overview. Freescale Semiconductor Quick Start Guide. Document Number: MC33696MODUG Rev. 0, 05/2007

Using the PowerQUICC II Auto-Load Feature

USB Bootloader GUI User s Guide

IIC Driver for the MC9S08GW64

MPR121 Proximity Detection

Managing Failure Detections and Using Required Components to Meet ISO7637 pulse 1 on MC33903/4/5 Common Mode Choke Implementation

Differences Between the DSP56301, DSP56311, and DSP56321

Using the CAU and mmcau in ColdFire, ColdFire+ and Kinetis

Electrode Graphing Tool IIC Driver Errata Microcontroller Division

Migrating from the MPC852T to the MPC875

MPC7455 RISC Microprocessor Hardware Specifications Addendum for the XPC74n5RXnnnNx Series

PDB Driver for the MC9S08GW64

Changing the i.mx51 NAND Flash Model for Windows Embedded CE TM 6.0

16-bit MCU: S12XHY256 Automotive Cluster Demo by: Jose M. Cisneros Steven McLaughlin Applications Engineer Microcontroller Solutions Group, Scotland

Use of PGA on MC56F800x Interaction of PDB, PGA and ADC

Component Development Environment Installation Guide

MSC8144AMC-S Getting Started Guide

MCF54451, MCF54452, MCF54453, MCF54454,

Using an I 2 C EEPROM During MSC8157 Initialization

Mechanical Differences Between the 196-pin MAP-BGA and 196-pin PBGA Packages

Introduction to the S12G Family EEPROM Including a Comparison between the S08DZ, S12XE, and S12P Families

etpu Automotive Function Set (Set 2)

Using the Project Board LCD Display at 3.3 volts

VortiQa Enterprise Quick Start Guide

i.mx31 PDK Power Measurement with GUI

Using the ColdFire+ Family Enhanced EEPROM Functionality Melissa Hunter Derrick Klotz

1 Introduction. 2 Problem statement. Freescale Semiconductor Engineering Bulletin. Document Number: EB727 Rev. 0, 01/2010

Using DMA to Emulate ADC Flexible Scan Mode on Kinetis K Series

Mask Set Errata for Mask 2M40J

MPC8260 IDMA Timing Diagrams

Interfacing MPC5500 Microcontrollers to the MFR4310 FlexRay Controller Robert Moran MCD Applications, East Kilbride, Scotland

ColdFire Convert 1.0 Users Manual by: Ernest Holloway

Using the Kinetis Family Enhanced EEPROM Functionality

Pad Configuration and GPIO Driver for MPC5500 Martin Kaspar, EMEAGTM, Roznov Daniel McKenna, MSG Applications, East Kilbride

Using GCR4 to Adjust Ethernet Timing in MSC8144 DSPs

EchoRemote Evaluation Software for Windows

etpu General Function Set (Set 1) David Paterson MCD Applications Engineer

Using the Asynchronous DMA features of the Kinetis L Series

Optically-Isolated Multilink BDM Interface for the S08/S12 Microcontrollers by Michael A. Steffen

Converting Earlier Versions of CodeWarrior for StarCore DSPs Projects to Version

HC912D60A / HC912Dx128A 0.5µ Microcontrollers Mask sets 2K38K, 1L02H/2L02H/3L02H & K91D, 0L05H/1L05H/2L05H

Power Cycling Algorithm using the MMA73x0L 3-Axis Linear Accelerometer

Using the Multi-Axis g-select Evaluation Boards

Errata to the MPC8280 PowerQUICC II Family Reference Manual, Rev. 1

Keil uvision 4 Kinetis Support for Freescale MQX RTOS Release Notes

MPC8569E Instruction RAM Microcode Package Release 169

Errata to MPC8569E PowerQUICC III Integrated Processor Reference Manual, Rev. 2

56F8300 BLDC Motor Control Application

Mask Set Errata for Mask 5L35K

SCI Driver for the MC9S08GW64

Support for IEEE 1588 Protocol in PowerQUICC and QorIQ Processors

PowerQUICC II Parity and ECC Capability

MC33897 Single-Wire CAN Transceiver Reliability and Quality Documents

Interrupts in Decoupled Parallel Mode for MPC5675K Configuration and Usage

56F805. BLDC Motor Control Application with Quadrature Encoder using Processor Expert TM Targeting Document. 56F bit Digital Signal Controllers

Using the Knock Window etpu Function

Interfacing and Configuring the i.mx25 Flash Devices

MCF5445x Configuration and Boot Options Michael Norman Microcontroller Division

ORDERING INFORMATION. Device Marking MPXC2011DTI Tape and Reel 423A Date Code, Lot ID MPXC2012DTI Tape and Reel 423A Date Code, Lot ID

MC9S08DZ60 Migrating from the 3M05C to M74K Mask Set D. Scott Brown Applications Engineering Microcontrollers Solutions Group Austin, TX, USA

Functional Differences Between the DSP56307 and DSP56L307

Using IIC to Read ADC Values on MC9S08QG8

Sensorless BLDC Motor Control Based on MC9S08PT60 Tower Board User Guide

Media Streaming to i.mx31 PDK over Wireless LAN

Interfacing MPC5xx Microcontrollers to the MFR4310 FlexRay Controller David Paterson MCD Applications, East Kilbride

i.mx51 WinCE Clock Setting

Freescale Semiconductor. Integrated Silicon Pressure Sensor On-Chip Signal Conditioned, Temperature Compensated and Calibrated MP3V5050.

Gallium Arsenide PHEMT RF Power Field Effect Transistor

Freescale Semiconductor. Integrated Silicon Pressure Sensor, On-Chip Signal Conditioned, Temperature Compensated and Calibrated MP3V5004G.

MC33794 Touch Panel System Using E-Field Sensor Setup Instructions

i.mx31 PDK 1.3 to PDK 1.4 Revision Changes Linux

Addendum to HPCN User s Guide: Quick-Start Guide

56F805. Digital Power Factor Correction using Processor Expert TM Targeting Document. 56F bit Digital Signal Controllers. freescale.

TLB Translation Setup for MPC745x and MPC744x in Non-Extended Mode

Symphony SoundBite: Quick Start with Symphony Studio. Installation and Configuration

ADC Driver for MC9S08GW64

Writing Touch Sensing Software Using TSI Module

Clock Mode Selection for MSC8122 Mask Set K98M

Mask Set Errata for Mask REV3.1_2N89D

MPR083 Proximity Evaluation Kit User s Guide

Multichannel Communication Controller HDLC Superchannel Mode on the MPC8560

MC9S08DZ60 Flash Usage Considerations Andy McKechan Applications Engineer East Kilbride

Asymmetric C++ Multicore Application for StarCore DSPs

PMSM Vector Control with Encoder on Kinetis Setup Guide for Demo Kits without a Tablet PC

Freescale BeeStack Documentation Overview Document Number: BSDO Rev /2008

Functional Differences Between DSP56302 and DSP56309 (formerly DSP56302A)

Mask Set Errata for Mask 2N40C

NetComm Software Errata

Transcription:

Freescale Semiconductor Technical Data Document Number: MPC7410ECS08AD Rev. 1, 11/2010 MPC7410 RISC Microprocessor Hardware Specifications Addendum for the MPC7410TxxnnnLE Series This document describes part-number-specific changes to the MPC7410 RISC Microprocessor Hardware Specifications (Document No. MPC7410EC). Specifications provided in this document supersede those in the MPC7410 RISC Microprocessor Hardware Specifications, Rev. 1 or later, for the part numbers listed in Table A only. Specifications not addressed herein are unchanged. Because this document is frequently updated, see the website listed on the back page of this document or contact your Freescale sales office for the latest version. Freescale Part Numbers Affected: MPC7410THX400LE MPC7410THX450LE MPC7410THX500LE MC7410TVU400LE 2010 Freescale Semiconductor, Inc. All rights reserved.

Table A. Part-Number-Specific Changes Operating Conditions Freescale Part Number CPU Frequency (MHz) V DD T J ( C) OV DD (V) Significant Changes from Hardware Specification MPC7410THX500LE 500 1.8 V ±100 mv 40 to 105 1.8/2.5/3.3 Extended temperature range. For all DC/AC document, see the MPC7410RX500LE MPC7410THX450LE 450 1.8 V ±100 mv 40 to 105 1.8/2.5/3.3 Extended temperature range. For all DC/AC document, see the MPC7410RX450LE MPC7410THX400LE 400 1.8 V ±100 mv 40 to 105 1.8/2.5/3.3 Extended temperature range. For all DC/AC document, see the MPC7410RX400LE MC7410TVU400LE 400 1.8 V ±100 mv 40 to 105 1.8/2.5/3.3 Extended temperature range. For all DC/AC document, see the MC7410VU400LE DC Electrical Characteristics The MPC7410TxxnnnLE series DC electrical characteristics are identical to that of the MPC7410, with the exception shown in Table B. Table B. Recommended Operating Conditions Characteristic Symbol Recommended Value Unit Die-junction temperature T j 40 to 105 C Note: See the MPC7410 RISC 2 Freescale Semiconductor

Part Numbers Addressed by this Specification Table C provides the ordering information for the MPC7410TxxnnnLE series. Table C. Part Marking Nomenclature MPC 7410 T xx nnn L E Product Code Part Identifier Process Descriptor Package Processor Frequency 1 Application Modifier Revision Level MPC 7410 T: 40 to 105 C HX = HCTE_CBGA 400 450 500 L: 1.8 V ±100 mv E: 1.4; PVR = 800C 1104 MC VU = HCTE_CBGA (Lead Free C5 Solder Spheres) 400 Note: 1. Processor core frequencies supported by parts addressed by this specification only. Parts addressed by other specifications may support other maximum core frequencies. Part Marking Parts are marked as the example shown in Figure A. MPC7410 THXnnnLE MMMMMM ATWLYYWWA 7410 BGA Notes: nnn is the speed grade of the part. MMMMMM is the 6-digit mask number. ATWLYYWWA is the traceability code. CCCCC is the country of assembly. This space is left blank if parts are assembled in the United States. Figure A. Part Marking for BGA Device Freescale Semiconductor 3

Document Revision History Table D provides a revision history for this document. Table D. Document Revision History Revision Date Substantive Chagnes(s) 1 11/2010 Removed HX from document title. Added MC7410TVU400LE to list of devices covered by this document. Updated Table C, Part Marking Nomenclature, to include MC7410TVU400LE. 0.1 4/2005 Document template update 0 10/2003 Initial release. Document ID change from MPC7410THXLEPNS for Part Number Specification to MPC7410ECS08AD for Hardware Specification Addendum. 4 Freescale Semiconductor

How to Reach Us: Home Page: www.freescale.com Web Support: http://www.freescale.com/support USA/Europe or Locations Not Listed: Freescale Semiconductor, Inc. Technical Information Center, EL516 2100 East Elliot Road Tempe, Arizona 85284 1-800-521-6274 or +1-480-768-2130 www.freescale.com/support Europe, Middle East, and Africa: Freescale Halbleiter Deutschland GmbH Technical Information Center Schatzbogen 7 81829 Muenchen, Germany +44 1296 380 456 (English) +46 8 52200080 (English) +49 89 92103 559 (German) +33 1 69 35 48 48 (French) www.freescale.com/support Japan: Freescale Semiconductor Japan Ltd. Headquarters ARCO Tower 15F 1-8-1, Shimo-Meguro, Meguro-ku Tokyo 153-0064 Japan 0120 191014 or +81 3 5437 9125 support.japan@freescale.com Asia/Pacific: Freescale Semiconductor China Ltd. Exchange Building 23F No. 118 Jianguo Road Chaoyang District Beijing 100022 China +86 10 5879 8000 support.asia@freescale.com For Literature Requests Only: Freescale Semiconductor Literature Distribution Center 1-800 441-2447 or +1-303-675-2140 Fax: +1-303-675-2150 LDCForFreescaleSemiconductor @hibbertgroup.com Information in this document is provided solely to enable system and software implementers to use Freescale Semiconductor products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits or integrated circuits based on the information in this document. Freescale Semiconductor reserves the right to make changes without further notice to any products herein. Freescale Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Freescale Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters which may be provided in Freescale Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customer s technical experts. Freescale Semiconductor does not convey any license under its patent rights nor the rights of others. Freescale Semiconductor products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Freescale Semiconductor product could create a situation where personal injury or death may occur. Should Buyer purchase or use Freescale Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold Freescale Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Freescale Semiconductor was negligent regarding the design or manufacture of the part. Freescale and the Freescale logo are trademarks of Freescale Semiconductor, Inc. Reg. U.S. Pat. & Tm. Off. All other product or service names are the property of their respective owners. The Power Architecture and Power.org word marks and the Power and Power.org logos and related marks are trademarks and service marks licensed by Power.org. 2010 Freescale Semiconductor, Inc. Document Number: MPC7410ECS08AD Rev. 1 11/2010