IP Enclosures Product Overview 2015 ENGINEERING COMPUTER SERVICES LTD
Wall Mounted Electrical Enclosure Systems IP Enclosures is a premium brand of high quality wall mounted electrical enclosures and accessories. An IP Enclosure is the enclosure of choice for those in mining, oil & gas, infrastructure, industrials, commercial, communications, defence, food and beverage industries. The IP Enclosures range of electrical enclosures are rated IP55, IP65 and IP66. Manufactured from powdercoated galvanised mild steel and grade 316 stainless steel, sizes range from 300H x 200W x 150D to 1200H x 1200W x 400D. IP Enclosures is an Australian brand manufactured in Europe. Available nationally via Tro Pacific, on-line via www.electrical-enclosures.com.au and locally via a nationwide network of resellers, IP Enclosures are readily accessible with comprehensive sales and technical support. Large quantities of all sizes are held in Australia and are available for immediate dispatch via our integrated sales, inventory and logistics systems to ensure delivery of customer orders in full on time. All IP Enclosures incorporate many advanced design features and each enclosure is consistently manufactured to precision in Europe to the highest of standards. For this reason, customers have adopted IP Enclosures as their standard enclosure system. Raising The Standard IP Enclosures is the enclosure of choice for customers because we raise the standard. Standard features include: - Monoblock fully welded body - Materials: Grade 316 Stainless Steel; or Galvanised Steel Powdercoated - IP Rating up to IP66 - Reversible hinged door with 120 opening - High quality concealed hinges - 8mm square drive lock (up to 1000 wide) - 3 Point locking system (over 1000 wide) - Polyurethane seal - Gland plate - M6 Earth stud - Mounting Pan/Plate (Gear Tray) - Door C-Rails for cable management - Holes with blind nutserts for mounting brackets, mounting plate and rainhood - Stainless steel locks, hinges and fasteners on stainless steel enclosures ipenclosures.com.au
Product Selection There are a number of factors to consider when selecting the correct enclosure to meet your needs. It is important to select the correct enclosure to optimise the life of the enclosure and internal components. Size The size of the enclosure is determined by the components and cables being housed including minimum distances between and around housed components and cables. IP Enclosures range in size from 300H x 200W x 150D to 1200H x 1200W x 400D. IP Rating IP Ratings are defined in IEC60529 (AS60529) as a two digit code detailing the extent of resistance to solids and liquids. The following table highlights the higher the number, the higher the resistance. IP Enclosures range from IP55 to IP66. Materials Material is typically selected based on the application, environment and location. IP Enclosures provide powdercoated galvanised steel for general applications and grade 316 stainless steel for high corrosion resistance. Options The application, environment, location, and installation may require certain options to be included as part of the enclosure. IP Enclosure options include: - Mounting Brackets - Rain Hood - Keyed Locks - Inner Door/Escutcheon IP-- 1st NUMERAL Protection against solids 1 2 3 4 5 6 solid bodies greater than 50mm (eg. involuntary hand contact) solid bodies greater than 12mm (eg. fingers) solid bodies greater than 2.5mm (eg. tools, cables) solid bodies greater than 1mm (eg. small tools) dust (no harmful deposits) Fully protected against dust 2nd NUMERAL Protection against liquids 1 2 3 4 5 6 7 8 dripping water (condensation) falling water up to 15º from the vertical rain water up to 60º from the vertical water splashing in all directions water jets from all directions wavelike water jets from all directions immersion the effects of prolonged immersion under water
Steel Electrical Enclosures Steel IP55 and IP65 Galvanised Steel Powdercoated The IP Enclosures range of wall mounted powdercoated galvanised steel enclosures is designed to house a variety of electrical switch and control equipment. It is suitable for internal and external electrical installations for infrastructure, industrials, commercial and communications applications. All IP Enclosures are built to precision in Europe to ensure consistent high quality standards. Features Monoblock fully welded body Reversible hinged door with 120 opening High quality concealed hinges Square drive lock (<1000 wide); 3-Point locking (>1000 wide) Gland plate with gasket M6 Earth stud Mounting Pan/Plate (Gear Tray) Door C-Rails for cable management Blind nutserts for mounting brackets, mounting plate and rainhood Benefits Provides excellent protection of capital equipment Good resistance to corrosion and chemical attack Robust construction with high impact resistance Easy access due to no centre mullion Sloping hood option reduces debris build up Nutserts eliminate drilling to retain IP rating integrity Applications Infrastructure Industrial Commercial Communications Technical Data Standard: TS/EN/IEC TSEN60529 TSEN62208 TSEN6149 Protection degree: IP55 and IP65 (Refer to table) Material: Galvanised Steel Seal: Polyurethane Thickness: Body up to 1.5mm; Doors 2.0mm Finish: Powdercoated Colour: RAL7035 ipenclosures.com.au
Steel Square drive lock (<1000 wide); 3-Point locking (>1000 wide) Keyed locks (optional) Polyurethane full perimeter seal 120 Door Opening Mounting pan/plate (gear tray) Earth connection studs for earthing between body and door Flanged gland plate with gasket High quality concealed hinges (Stainless steel on stainless steel enclosures) Door C-Rails for cable management Rainhood (optional) Nutserts provided as standard to eliminate drilling to retain IP rating integrity
Ordering Information Height (H) x Width (W) x Depth (D) No. of locks No. of doors Thickness IP-302015 300x200x150 1 1 1.2 IP-303015 300x300x150 1 1 1.2 IP-303020 300x300x200 1 1 1.2 IP-403015 400x300x150 1 1 1.2 IP-403020 400x300x200 1 1 1.2 IP-404020 400x400x200 1 1 1.2 IP-503015 500x300x150 1 1 1.2 IP-503020 500x300x200 1 1 1.2 IP-504020 500x400x200 1 1 1.2 IP-504025 500x400x250 1 1 1.2 IP-505020 500x500x200 1 1 1.2 IP-505025 500x500x250 1 1 1.2 IP-604020 600x400x200 1 1 1.2 IP-604025 600x400x250 1 1 1.2 IP-606020 600x600x200 1 1 1.2 IP-606030 600x600x300 1 1 1.2 IP-705020 700x500x200 2 1 1.5 IP-705025 700x500x250 2 1 1.5 IP-806020 800x600x200 2 1 1.5 IP-806025 800x600x250 2 1 1.5 IP-806030 800x600x300 2 1 1.5 IP-808020 800x800x200 2 1 1.5 IP-808030 800x800x300 2 1 1.5 IP-808040 800x800x400 2 1 1.5 IP-1006025 1000x600x250 2 1 1.5 IP-1006030 1000x600x300 2 1 1.5 IP-1008030 1000x800x300 2 1 1.5 IP-1008040 1000x800x400 2 1 1.5 IP-10010030 1000x1000x300 3 2 1.5 IP-10010040 1000x1000x400 3 2 1.5 IP-1206030 1200x600x300 2 1 1.5 IP-1208030 1200x800x300 2 1 1.5 IP-1208040 1200x800x400 2 1 1.5 IP-12010030 1200x1000x300 3 2 1.5 IP-12010040 1200x1000x400 3 2 1.5 IP-12012030 1200x1200x300 3 2 1.5 IP-12012040 1200x1200x400 3 2 1.5 Steel
Ordering Information - Accessories Description Steel IP-KL IP-WMB4 Key locks Wall Mount Bracket Set CG-V60 60mm Ventilator CG-V80 80mm Ventilator Key Locks IP-KL & IP-SSKL (Stainless Steel) IP Enclosures are provided standard with square drive locks for enclosures less than 1000mm wide or a 3-Point locking system for enclosures greater than 1000mm wide. A keyed lock IP-KL can be provided as an option. Key Lock Dust Cap IP-SSKLDC Key lock dust caps can be provided as an option to prevent ingress of dust and particles. Wall Mount Bracket Set IP-WMB4 & IP-SSMB Galvanised mild steel and grade 316 stainless steel wall brackets can be provided as an option. Each wall mount bracket set comes with four (4) wall brackets and fasteners. All IP Enclosures are provided with nutserts to accomodate wall mount brackets to eliminate drilling to retain IP rating integrity. Ventilator CG-V60 & CG-V80 60mm and 80mm ventilators can be provided as an option. IP Enclosures can arrange water-cutting of holes and profiles to accomodate required fittings. Customisation and Water-Cutting IP Enclosures can also provide customisation including custom hole and profile cutting to suit customer needs. IP Enclosures recommends water cutting.
316SS Electrical Enclosures 316SS IP55 and IP66 Grade 316 Stainless Steel The IP Enclosures premium range of wall mounted grade 316 stainless steel enclosures is designed for extreme duty to house a variety of electrical switch and control equipment. It is suitable for internal and external electrical installations for mining, oil & gas, infrastructure, industrials, commercial, communications, defence, food and beverage applications. All IP Enclosures are built to precision in Europe to ensure consistent high quality standards. Features Monoblock fully welded body Reversible hinged door with 120 opening High quality concealed hinges Square drive lock (<1000 wide); 3-Point locking (>1000 wide) Gland plate with gasket M6 Earth stud Mounting Pan/Plate (Gear Tray) Door C-Rails for cable management Blind nutserts for mounting brackets, mounting plate and rainhood Stainless steel locks, hinges and fasteners Benefits Provides extreme protection of capital equipment Excellent resistance to corrosion and chemical attack Robust construction with high impact resistance Easy access due to no centre mullion Sloping hood option reduces debris build up Nutserts eliminate drilling to retain IP rating integrity Applications Mining Industrials Defence Oil & Gas Commercial Agriculture & Irrigation Infrastructure Communications Food & Beverage Technical Data Standard: TS/EN/IEC TSEN60529 TSEN62208 TSEN6149 Protection degree: IP55 and IP66 (Refer to table) Material: Grade 316 Stainless Steel Seal: Polyurethane Thickness: Body up to 1.5mm; Doors 2.0mm
Polyurethane full perimeter seal High quality concealed hinges (Stainless steel on stainless steel enclosures) 316SS Door C-Rails for cable management Square drive lock (<1000 wide); 3-Point locking (>1000 wide) Keyed locks (optional) Mounting pan/plate (gear tray) Earth connection studs for earthing between body and door Flanged gland plate with gasket Rainhood (optional) Nutserts provided as standard to eliminate drilling to retain IP rating integrity Looking After Your Stainless Steel It is important to handle stainless steel carefully to prevent ferrous metal contamination. Do not grind mild steel adjacent to stainless steel or rub mild steel over stainless steel as this will contaminate stainless steel which will result in rusting. It is also important to treat (pickle/passivate) heat affected areas caused by drilling, cutting or welding processes. If pickle/passivate faciltiies are not available, water-cutting holes is recommended to ensure the integrity of stainless steel is maintained. Our representatives can assist with water-cutting if required. Order Info - Accessories IP-SSMB IP-SSKL IP-SSKLDC Description 316 Stainless Steel Mounting Bracket 316 Stainless Steel Key Lock 316 Stainless Steel Key Lock Dust Cap
Ordering Information - Enclosures Height x Width x Depth (mm) No. of Locks Doors Weight (kg) Mounting Plate Height x Width x Thick- (mm) 316SS IP-SS302015 300 x 200 x 150 1 quarter turn 1 4.80 IP-SS303015 300 x 300 x 150 1 quarter turn 1 6.25 250 x 230 x 1.5 IP-SS403015 400 x 300 x 150 1 quarter turn 1 7.85 350 x 230 x 1.5 IP-SS403020 400 x 300 x 200 1 quarter turn 1 8.75 350 x 230 x 1.5 IP-SS404020 400 x 400 x 200 1 quarter turn 1 10.65 350 x 330 x 1.5 IP-SS504020 500 x 400 x 200 1 quarter turn 1 12.90 450 x 330 x 1.5 IP-SS504025 500 x 400 x 250 1 quarter turn 1 13.85 450 x 330 x 1.5 IP-SS505025 500 x 500 x 250 1 quarter turn 1 16.45 450 x 430 x 1.5 IP-SS604020 600 x 400 x 200 1 quarter turn 1 14.90 550 x 330 x 1.5 IP-SS604025 600 x 400 x 250 1 quarter turn 1 16.15 550 x 330 x 1.5 IP-SS606030 600 x 600 x 300 1 quarter turn 1 23.15 550 x 530 x 1.5 IP-SS705025 700 x 500 x 250 2 quarter turn 1 21.60 650 x 430 x 1.5 IP-SS806025 800 x 600 x 250 2 quarter turn 1 28.00 750 x 530 x 1.5 IP-SS806030 800 x 600 x 300 2 quarter turn 1 29.7 750 x 530 x 1.5 IP-SS808030 800 x 800 x 300 2 quarter turn 1 37.00 750 x 730 x 1.5 IP-SS1006030 1000 x 600 x 300 2 quarter turn 1 35.90 950 x 530 x 1.5 IP-SS1008030 1000 x 800 x 300 2 quarter turn 1 44.90 950 x 730 x 1.5 IP-SS1008040 1000 x 800 x 400 2 quarter turn 1 50.25 IP-SS10010030 1000 x 1000 x 300 3 point handle 2 55.22 950 x 930 x 2.0 IP-SS10010040 1000 x 1000 x 400 3 point handle 2 61.70 IP-SS1208030 1200 x 800 x 300 2 quarter turn 1 52.72 1150 x 730 x 2.0 IP-SS12010030 1200 x 1000 x 300 3 point handle 2 62.34 1150 x 930 x 2.0 IP-SS12010040 1200 x 1000 x 400 3 point handle 2 71.90 IP-SS12012030 1200 x 1200 x 300 3 point handle 2 70.41 1150 x 1130 x 2.0 IP-SS12012040 1200 x 1200 x 400 3 point handle 2 81.80
316 S/S Inner Door Set Powder Coated Steel Inner Door Set Rain Hoods Height (H) x Width (W) Height (H) x Width (W) Width x Depth (mm) 316SS IP-PSID3020 300 x 200 IP-SSID3030 300 x 300 IP-PSID3030 300 x 300 IP-SSRH3015 300 x 150 IP-SSID4030 400 x 300 IP-PSID4030 400 x 300 IP-SSRH3015 300 x 150 IP-SSRH3020 300 x 200 IP-SSID4040 400 x 400 IP-PSID4040 400 x 400 IP-SSRH4020 400 x 200 IP-SSID5040 500 x 400 IP-SSRH4020 400 x 200 IP-PSID5040 500 x 400 IP-SSRH4025 400 x 250 IP-SSID5050 500 x 500 IP-PSID5050 500 x 500 IP-SSRH5025 500 x 250 IP-SSID6040 600 x 400 IP-SSRH4020 400 x 200 IP-PSID6040 600 x 400 IP-SSRH4025 400 x 250 IP-SSID6060 600 x 600 IP-PSID6060 600 x 600 IP-SSRH6030 600 x 300 IP-SSID7050 700 x 500 IP-PSID7050 700 x 500 IP-SSRH5025 500 x 250 IP-SSID8060 800 x 600 IP-PSID8060 800 x 600 IP-SSRH6025 600 x 250 IP-SSRH6030 600 x 300 IP-SSID8080 800 x 800 IP-PSID8080 800 x 800 IP-SSRH8030 800 x 300 IP-SSID10060 1000 x 600 IP-PSID10060 1000 x 600 IP-SSRH6030 600 x 300 IP-SSID10080 1000 x 800 IP-SSRH8030 800 x 300 IP-PSID10080 1000 x 800 IP-PSID100100 1000 x 1000 IP-SSRH10030 1000 x 300 IP-SSID100100 1000 x 1000 IP-SSID12080 1200 x 800 IP-PSID12080 1200 x 800 IP-SSRH8030 800 x 300 IP-SSID120100 1200 x 1000 IP-PSID120100 1200 x 1000 IP-SSRH10030 1000 x 300 IP-SSID120120 1200 x 1200 IP-PSID120120 1200 x 1200 IP-SSRH12030 1200 x 300
ecs Engineering Computer Services Ltd Corner Te Rapa & Ruffell Road PO Box 20204, Te Rapa Hamilton, 3288, New Zealand Sales Phone 0800 849 2211 General 07 849 2211 Fax 07 849 2220 WWW.ECSNZ.COM FREEPHONE 0800 849 2211