Quick Start Guide. 2-Port 10/100 Device Server RS-232/422/485 DB9 M. Access two serial RS-232 or RS-422/485 devices over a 10- or 100-Mbps network.

Similar documents
ICD200A Quick Start Guide. Convert RS-232 data signals to RS-422/485 signals in heavy industrial areas.

Quick Start Guide. Industrial Managed Gigabit Ethernet PoE+ Switch LPH2008A-4GSFP

Securely manage data center and network equipment from anywhere in the world.

Quick Start Guide. Remote Console Manager Quick Start Guide

Securely manage data center and network equipment from anywhere in the world.

8-Port 10/100BASE-TX Hardened Ethernet Extender Switch

Quick installation guide.

Black Box Tech Support: FREE! Live. 24/7.

NPort 6150/6250 Series Quick Installation Guide

Securely manage data center and network equipment from anywhere in the world.

Extends your KVM from PS/2 or USB servers up to 100 feet (30 m) away.

Black Box Tech Support: FREE! Live. 24/7.

Quick Installation Guide

SmartPath EMS VMA Virtual Appliance Quick Start Guide

Quick Start Guide. Gigabit Smart Switch Eco Fanless. Supports http and SNMP interfaces for switch management. LGB2118A LGB2124A

WRT4000 Series Cellular Wireless Routers

NPort 5100 Series Quick Installation Guide

Industrial Serial Device Server

NPort 6600 Series Quick Installation Guide

Internal tray pulls out towards the user, providing room to manage the fiber cable behind the fiber adapter panels.

LES2700A-SSS & LES2702A-SSS 10/100 SECURE SERIAL SERVERS

Quick Start Guide. 8-Port Value-Line Console Server QS Guide LES1508A

NPort 5200 Series Quick Installation Guide

MGate TM EIP3000 DF1 to EtherNet/IP Gateway User s Manual

XPress DR+W Quick Start Guide

NPort W2150A/W2250A Series Quick Installation Guide

NPort 5400 Series Quick Installation Guide

Quick Installation Guide

Internal tray pulls out towards the user, providing room to manage the fiber cable behind the fiber adapter panels or cassettes.

Tel: Fax:

NCOM SERIAL DEVICE SERVER 1XX SERIES USER S MANUAL

EtherSeries. EtherSeries CR-2. CR-2-Opto. User s Guide. Revised October 7, 2013 Firmware Version 1.X

Use with Secure Device Servers, Console Servers, and Remote Console Managers.

NCOM SERIAL DEVICE SERVER 4XX SERIES USER S MANUAL

Lantech LSC-1102B SERIAL TO TCPIP CONVERTER. User Manual

UC-8410A Quick Installation Guide

MGate MB3000 Modbus Gateway User Manual

Miniature Asynchronous 4-Wire High Speed Modems

NetCom Mini. SCADA system Building automation system Self-service banking system Other remote and distributed serial devices control

USER S MANUAL. PH232Ex1. #1 RS-232 Serial Port to Ethernet, Terminal Server/Client. Doc No: PH232Ex1-UM-001 IPEX. (IP Electronix)

ES-511, ES-522, ES-551, ES-571. Quick Start Guide. for Brainboxes Ethernet to Serial Range

NPort S8000 Series Quick Installation Guide

EX-6014WI RS232 to WiFi Wireless Adapter, w/ Mounting Kit

MGate MB3000 Modbus Gateway User s Manual

Atop Technologies, Inc. 1-port Modbus Gateway MB5001C/MB5001C-Sis

INDUSTRIAL POE SWITCH

Works with LES1200, LES1300, and LES1500 Series console servers.

MGate MB3170/MB3270 Quick Installation Guide

RS-232 Connector Pin Assignments

Select a Data Communication Interface

Quick Installation Guide

MGate 5118 Quick Installation Guide

TRP-C37 User s Manual

ISOLATED RS-232 TO RS-422/485 CONVERTER

TRP-C37. Ethernet to RS232/422/485 Converter. User s Manual. Printed Apr.2014 Rev 1.3

STEP X - Name of Step QUICK START GUIDE SP385A-R3, SP390A-R3 USB TO RS CONVERTER 24/7 TECHNICAL SUPPORT AT OR VISIT BLACKBOX.

MSD-SRF2XM Multi-port RS-232 to Ethernet Data Gateway User Manual

Document Name: User Manual for SC10EK4 Serial to Ethernet Converter with 4 TCP Sockets. Index

Mini Driver V (Mini Driver MP with 5-Screw Terminal Block) MINI DRIVER MP

DGH A3000 Configuration Guide For use with DGH Modules

MGate 5111 Quick Installation Guide

Quick Installation Guide

Ethernet Interface Module

Installation and User Guide

OnCell G3100 Series Quick Installation Guide

RTU560 Remote Terminal Unit Connections and Settings

TRP-C37M User s Manual

WiFi to RS-232 adapter user manual

Operation Manual of EX9132CST-Series

DT Desktop Series

RS-232/422/485 to Copper or Fiber. Ethernet Converter. User s Manual

Serial/Ethernet Converter

Modbus TCP/RTU Gateway

I-7560U/7561U/7563U. User Manual WARRANTY WARNING COPYRIGHT TRADEMARKS CONTACT US

Document Name: User Manual for SC10MK, Modbus RTU to Modbus TCP Converter

User Manual A08. User Manual

Remote Console Manager with GSM Modem QS Guide

TRP-C37M User s Manual

5600 Series. 8 and 16-port Serial Device Servers. Features. Internet Readiness for up to 16 Serial Devices

International Headquarters. European Headquarters

International Headquarters. European Headquarters

2004 Copyright BlackBox is a trademark of BlackBox. All rights reserved Rev. A 01/04. LES2700A-10 Quick Start Guide

TRP-C37. Ethernet to RS232/422/485 Converter. User s Manual. Printed September Rev 1.6

Starter Guide Version Sphinx Access Control System

Appendix A Cable Pinouts

Atop ABLELink SE5404 Series 4-Port Ethernet Serial Server

SunSpec Reference Architecture SunSpec CEA 2045 Inverter Adaptor

USB-COM Plus ISO (USB-COMi SI-M)

Operation Manual EX-9133C-2-MTCP

Ethernet Serial Server

Installation and Configuration Guide

Cable Pinouts. SRP I/O Module

Multi-Channel RS-232 Current Loop Interface Converter (CLIC)

NetBiter Serial Server User Manual

ROCKETLINX ES8508 ES8508 ES8508F ES8508-XT ES8508F-XT QUICK INSTALLATION GUIDE

Universal ipulse Ethernet Adapter. User Manual

Quick Start Guide Elinx ESW500 Series. Managed Din Rail Ethernet Switch

Moxa Video Encoder. VPort 251 Series Quick Installation Guide. Second Edition, June 2008

1 port RS-232 Device Server

VirtualSCADA VSU-485G USB to RS422/485 Isolated Converter User Manual

Transcription:

LES302A LES302A-KIT LES302AE-KIT 2-Port 10/100 Device Server RS-232/422/485 DB9 M Quick Start Guide Access two serial RS-232 or RS-422/485 devices over a 10- or 100-Mbps network. Customer Support Information Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500) FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746 Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018 Web site: www.blackbox.com E-mail: info@blackbox.com

This quick-start guide provides brief descriptions of the LES302A to help you get started. For detailed information, refer to the user s manual on the product CD. QS.1. What s Included Your package should contain the following items. If anything is missing or damaged, contact Black Box Tech Support at 724-746-5500 or info@blackbox.com. LES302A-KIT or LES302AE-KIT: (1) Ethernet Serial Server (1) CD-ROM containing configuration utility and a user manual in PDF format (2) wallmounting screws Power adapter with 12-VDC, 1.75-A jack (PS012B [U.S.] or PS012BE [Europe]) This printed quick-start guide LES302A: (1) Ethernet Serial Server (1) CD-ROM containing configuration utility and a user manual in PDF format This printed quick-start guide QS.2 Optional Accessories DIN Rail Kit (LES30X-DR) DB9 to TB5 Adapter (for RS-422 or RS-485) (LES30X-TB5) QS.3 Hardware Setup Interfaces NOTES: The RS-232/422/485 interfaces do not support isolation. Press the LES302A s reset button to reset the settings to the default values. Figure QS-1 shows the interface. Page 2 724-746-5500 blackbox.com

RJ-45 10-/100-Mbps Ethernet port Reset button DC 9-30-V DIN rail screw hole Wallmount screw hole DB9 male serial ports Figure QS-1. LES302A interface. Indicators Table QS-1 describes the indicators on the LES302A. Table QS-1. LED indicators. LAN LED Message Off Blinking green Blinking orange COM Port LED Message Off Blinking RUN LED Message On Blinking (rate: 0.5 sec.) Description Ethernet disconnected Data is transmitted on Ethernet at 100 Mbps Data is transmitted on Ethernet at 10 Mbps Description No data is transmitted on COM port Data is transmitted on COM port Description Jumper JP1 Pin 1 and Pin 2 are shorted to disable AP firmware running AP firmware is running normally Page 3

Installation Steps (LES302A-KIT or LES302AE-KIT): 1. Connect an LES302A to the supplied power adapter (PS012B [U.S.] or PS102BE [Europe]). 2. Connect an LES302A to your Ethernet network. Use a standard straight-through Ethernet cable to connect it to a hub/switch. Use a crossover cable to connect it to a PC s Ethernet port. NOTE: If you connect the PC to the LES302A, make sure that the PC is in the same subnetwork as the LES302A. 3. Connect the LES302A s serial ports to two serial devices. NOTE: You may need an LES30X-TB5 adapter for RS-422 or RS-485 applications. 4. You can mount the LES302A to a wallplate (mounting screws are included) or a DIN rail using the DIN rail kit (LES30X-DR). QS.4 Software Setup Table QS-2. Software default settings. Default Network Setting IP: 10.0.50.100 Gateway: 10.0.0.254 Default User Name/Password User name: admin Password: null (leave it blank) Subnet: 255.255.0.0 Auto IP (Dynamic IP): A DHCP server can automatically assign the IP address and network settings. The LES302A supports the DHCP function. By default, the DHCP function on the LES302A is disabled. You can use SerialManager.exe to enable this function (see Figure QS-2). Figure QS-2. SerialManager.exe utility Dialog window. Assign a Static IP address by: Using Telnet, SerialManager.exe utility, or Web browser. Using Telnet 1. Telnet to the LES302A using the DOS command Telnet IP_address. Example: telnet 10.0.50.100 2. The LES302A s network, link mode, and COM ports settings can be configured in the Telnet window. Page 4 724-746-5500 blackbox.com

Using SerialManager.exe Utility Use SerialManager.exe (included on the product CD) to automatically search for all LES302A units connected to your local area network. Then select the desired LES302A to configure the network setting individually. Using Web Browser 1. Make sure your PC is located on the same network subnet as LES302A. 2. Open a Web browser, then type in the IP address of the LES302A to be configured. The default user name is admin and the default password is null (leave it blank). 3. The LES302A s network, link mode, and COM port settings can be configured in different Web pages. 4. Click on Save Configuration to save settings. 5. Click on the Restart button to make the change effective if necessary. QS.5 Pin Assignments The pin assignments of the DB9 connectors on LES302A are shown in the following table: Table QS-3. DB9 connector pin assignments. Pin Number RS-232 Full-Duplex 2-Wire RS-485 Half-Duplex RS-422/4-Wire RS-485 Full Duplex 1 DCD N/A N/A 2 RXD N/A (reserved) TXD+ 3 TXD DATA+ RXD+ 4 DTR N/A N/A 5 SG (Signal Ground) SG (Signal Ground) SG (Signal Ground) 6 DSR N/A N/A 7 RTS DATA- RXD- 8 CTS N/A (reserved) TXD- 9 N/A N/A N/A NOTE: Use an LES30X-TB5 adapter for RS-422 and RS-485 applications. Page 5

The LES30X-TB5 terminal block pin assignments are shown in Table QS-4. Table QS-4. Terminal block pin assignments. Pin Number RS-422/4-Wire RS-485 Full Duplex 2-Wire RS-485 Half-Duplex 1 T+ Not connected 2 T- Not connected 3 R+ Data+ 4 R- Data- 5 SG (Signal Ground) SG (Signal Ground) Page 6 724-746-5500 blackbox.com

NOTES Page 7

Black Box Tech Support: FREE! Live. 24/7. Tech support the way it should be. Great tech support is just 30 seconds away at 724-746-5500 or blackbox.com. About Black Box Black Box provides an extensive range of networking and infrastructure products. You ll find everything from cabinets and racks and power and surge protection products to media converters and Ethernet switches all supported by free, live 24/7 Tech support available in 30 seconds or less. Copyright 2011. Black Box Corporation. All rights reserved. Black Box and the Double Diamond logo are registered trademarks of BB Technologies, Inc. Any third-party trademarks appearing in this white paper are acknowledged to be the property of their respective owners. LES302A Quick Start Guide, version 1 724-746-5500 blackbox.com