IP-guard v3.2 Migration Guideline

IP-guard v3.2 Migration Guideline P. 2 INTRODUCTION The purpose of this document is to provide detailed guideline for IP-guard server migration. The organization of this document is as followings: In Section 1, the backup procedures of IP-guard Database and Server are presented. In Section 2, how to migrate the backup Database and IP-guard Server data to new computer machine is presented. Notices that we based on the following environments to make this guideline 1) Windows Server 2003 2) SQL Server 2005 3) SQL Server Management Studio Express

IP-guard v3.2 Migration Guideline P. 3 Section 1 Backup IP-guard Database & Server In this section, the backup procedures for IP-guard Database and Server are presented. The best practices for IP-guard Database and Server management are: full backup for IP-guard Database which should be done in MS SQL Server Management Studio (Section 1.1); and backup IP-guard Server log data which stored in \DATA of the IP-guard installation folder (Default data location: C:\Program Files\TEC\IPguard3\DATA\) (Section 1.2). The detailed procedures are as followings: Section 1.1 Backup IP-guard Main Database 1. Right click IP-guard Service Manager to stop the server (Figure 1.1) Figure 1.1 Stop IP-guard Server 2. Open SQL Server Management Studio and connect to the database (Figure 1.2)

IP-guard v3.2 Migration Guideline P. 4 Figure 1.2 Connect Database 3. In the Object Explorer, expend the Databases. You can see a Database called OCULAR3 4. Right click the Database OCULAR3, Tasks Back Up to backup the database (Figure 1.3) Figure 1.3 Detach Database OCULAR3 5. In the Back Up Database OCULAR3 window, add a destination path with backup file name e.g.

IP-guard v3.2 Migration Guideline P. 5 IP-guard_full_backup.bak. Click the button OK to confirm 6. Click the button OK to complete the backup Figure 1.4 Backup Database

IP-guard v3.2 Migration Guideline P. 6 Figure 1.5 Complete Database Backup 7. Detach the database OCULAR3. Click OK to confirm 8. Click OK to confirm to detach the database in the Detach Database windows Section 1.2 Backup IP-guard daily log data 1. IP-guard Server daily log data is stored in \DATA of the IP-guard installation folder (Default data location: C:\Program Files\TEC\IPguard3\DATA\), you can copy the whole \DATA folder in order to backup the IP-guard log data.

IP-guard v3.2 Migration Guideline P. 7 Section 2 IP-guard Migration Suppose SQL Server and IP-guard server are installed in a new machine properly. [Important] - Make sure IP-guard is installed properly, you can login into IP-guard Console using admin account

IP-guard v3.2 Migration Guideline P. 8 [Procedures] 1. Stop the IP-guard server if it is running Figure 2.1 Stop IP-guard Server 2. Open SQL Server Management Studio Express and connect to the database Figure 2.2 Connect Database 3. In the Object Explorer, expend the Databases OCULAR3 4. Right click the Database OCULAR3, Tasks Restore Database to start restoring the database (Figure 2.3)

IP-guard v3.2 Migration Guideline P. 9 Figure 2.3 Restore Database 5. In the Restore Database OCULAR3 windows, you should select 1) destination for restore; 2) source for restore; 3) Select the backup set to restore; 4) select Overwrite all existing backup sets and 5) finally click OK to confirm to restore database (Figure 2.4)

IP-guard v3.2 Migration Guideline P. 10 6. Click OK to complete the restore Figure 2.4 Restore Database Confirmation Figure 2.5 Complete Database Restore

IP-guard v3.2 Migration Guideline P. 11 7. Go to IP-guard Server installation folder (Default path: C:\Program Files\TEC\IPguard3\), copy and paste the data folder \DATA which backup in Section 1.2 point 1. The folder \DATA contains all the IP-guard daily log data. 8. Restart IP-guard Server (Figure 2.8) Figure 2.8 Restart IP-guard Server 9. Once the IP-guard server starts up completely, right click IP-guard Service Controller Tools Register, login with your old admin password to enter the Register windows. (Figure 2.9a)

IP-guard v3.2 Migration Guideline P. 12 Figure 2.9a IP-guard registration Click the Upgrade button, the serial number text field becomes editable, input the licensed serial number Figure 2.9b Click OK to confirm the input serial number (Figure 2.9b) Click OK to confirm the serial number is updated successfully Figure 2.9c Successful upgrade serial number System message will popup The server must be input new register code. Click OK to confirm

IP-guard v3.2 Migration Guideline P. 13 (Figure 2.9d) Figure 2.9d New Register Code Input the Product Registration information: Company name, telephone number, contact person and email Figure 2.9e Product Registration Information Click the button Register Online System message will popup to confirm your input email address as the new register information will send to your registered email. Click Yes to confirm or click No to re-enter your email address (Figure 2.9f) Figure 2.9f Confirm input email address Wait for seconds, once the registration center confirmed your input serial number and product registration information, the Register ID (RID) will send back to your IP-guard server and appear in

IP-guard v3.2 Migration Guideline P. 14 the RID text field. Figure 2.9g Complete registration Click OK to confirm the successful registration (Figure 2.9g) Click the button Close to exit the registration windows (Figure 2.9h)

IP-guard v3.2 Migration Guideline P. 15 Figure 2.9h Exit registration windows 10. If you set a checkcode in previous IP-guard server, input the same checkcode again in this new IP-guard server (Service Manager Tools Checkcode). Otherwise, the agents cannot be managed by this new server. Figure 2.10 Set checkcode 11. Login into the IP-guard Console using the old admin password. If you login successfully, you should be able to see all previous settings including all agents, agents grouping, policies settings, classes management etc. have already migrated in this new server (Figure 2.11) Figure 2.11 Successful Migration