Selection table for safety switches SG Standard One actuating head made of metal M SR11 RC18 Thread M0x1.5 for cable glands 11-pin + PE 18-pin + PE Two contacts Four contacts NC, Standard M SR11 RC18 Two contacts Four contacts 0 1 Page 3
Safety switch SG f Metal housing with metal actuating head f Cable entry M0 x 1.5 f optional Cable entry M0 x 1.5 Dimension drawing Insertion depth v h Insertion depth 35,5 1,5,1 5, 0,3 <13> M0x1,5 (3x) 76 pproach direction Horizontal and vertical Can be adjusted in 0 steps 0 <0> s f Slow-action switching contact f 1 Slow-action switching contact 0,3 Please order actuator separately (See pages -6) For cable glands see page 10 Wiring diagrams ctuator inserted 1 1 1 1 11 1 1 1 3 33 1 1 11 1 33 3 Ordering table Series Order no./item 10375 1 SG1--M SG Cable entry 3 x M0 x 1.5 1 1067 SG1-1-M 0 Subject to technical modifications; no responsibility is accepted for the accuracy of this information.
SR11 11-pin + PE Dimension drawing Insertion depth Insertion depth h 35,5 1,5 v,1 5, 0,3 13 M0x1,5 (3x) 76 <0> C D 0,3 Please order actuator separately (See pages -6) Wiring diagrams ctuator inserted 1 8 7 6 5 3 1 1 33 3 For safety precautions see page 1 For technical data see page 117 3 0 For plug connectors see page 100 SR11 Ordering table Series Order no./item SG SR11 1 106736 SGE-1SR11 Subject to technical modifications; no responsibility is accepted for the accuracy of this information. 1
Safety switch SG f Metal housing with metal actuating head f illuminated pushbuttons f RC18 RC18 18-pin + PE Dimension drawing Insertion depth v h Insertion depth 35,5 1,5,1 5, 0,3 <13> M0x1,5 (x) Pos. 1 76 <0> Pos. utton S1 illuminated yellow pproach direction Horizontal and vertical Can be adjusted in 0 steps utton S illuminated white 56 s f Slow-action switching contact 0,3 Please order actuator separately (See pages -6) For plug connectors see page 101-10 Wiring diagrams ctuator inserted RC18 ETX5 17 6 11 5 10 3 8 1 13 1 18 7 15 1 S1 YE S WH Ordering table Series Order no./item SG RC18 Pos. 1: yellow push button Pos. : white push button 1001 SG-RC18-ETX5 Subject to technical modifications; no responsibility is accepted for the accuracy of this information.
Technical Data Safety switch SG The technical data on switches and switching elements apply to all connections. Further technical data are given for the connection selected. Reliability values acc. to EN ISO 138-1 10d 3 x 10 6 operating cycles Switch Material Housing Reinforced thermoplastic Mechanical life 1 x 10 6 operating cycles mbient temperature - 0... + 80 C Weight pprox. 0.75 kg pproach speed, max. 0 m/min ctuating force 5 N Extraction force 5 N Retention force 10 N Insertion depth (minimum required travel + permissible overtravel) ctuator S standard Lateral approach direction (h).5 + 5 mm pproach direction from top (v).5 + 5 mm Switching principle Slow-action switching contact 1 with switching contacts Min. switching current at V DC 1 m Switching voltage, min., at 10 m 1 V Contact material Silver alloy, gold flashed, cable entry M0 x 1.5 M0x1,5 Screw terminal M0 x 1.5 Conductor cross-section 0.3... 1.5 mm² Degree of protection according to IEC 605 IP 67 Rated insulation voltage Ui 50 V C/DC Rated impulse withstand voltage Uimp.5 kv Conventional thermal current Ith Short circuit protection acc. to IEC 606-1 (control circuit fuse) gg Utilization category according to IEC 607-5-1 C-15 Ie Ue V DC-13 Ie Ue V Subject to technical modifications; no responsibility is accepted for the accuracy of this information. 17
Technical Data, plug connector SR11 1-pol 11-pin + PE Degree of protection according to IEC 605 IP 65 1) Rated insulation voltage Ui 50 V C/DC Rated impulse withstand voltage Uimp 1.5 kv Conventional thermal current Ith Short circuit protection acc. to IEC 606-1 (control circuit fuse) gg Utilization category according to IEC 607-5-1 C-15 Ie Ue 50 V DC-13 Ie Ue V 1) Screwed tight with the related plug connector (see page 100), plug connector RC18 1-pol 18-pin + PE Degree of protection according to IEC 605 1) ) IP 65 Rated insulation voltage Ui 110 V C/DC Rated impulse withstand voltage Uimp.5 kv Conventional thermal current Ith Short circuit protection acc. to IEC 606-1 (control circuit fuse) gg Utilization category according to IEC 607-5-1 C-15 Ie Ue 110 V DC-13 Ie Ue V 1) Screwed tight with the related plug connector (see page 101-10) ) SG...EXT5 with push buttons IP 5 18 Subject to technical modifications; no responsibility is accepted for the accuracy of this information.