Dante Product Group und32 32 Channel Break Out Interface 32 unique output channels from a Dante network Individual volume control on each output (controlled from front panel or via software over the network) Primary and Secondary Dante network interfaces Front panel and network control of Dante audio flow assignment to each output Supports Dante and AES67 P/N: und32 Synapse D32i 32 Channel Break In Interface w/db25 or 3-Pin Depluggable Connectors 32 balanced line level inputs either DB-25 or 3-Pin Phoenix Redundant (primary/secondary or daisy chain) RJ-45 connectors and SFP (fiber) connectors Individual channel selection and monitoring using the front panel headphone jack Level metering on the front panel OLED display Supports Dante and AES67 P/N: Synapse D32i-D (DB-25 audio connectors) P/N: Synapse D32i-TB (Phoenix terminal block audio connectors) PAGE 2
Synapse D32o 32 Channel Break Out Interface w/db25 or 3-Pin Depluggable Connectors 32 balanced line level outputs either DB-25 or 3-Pin Phoenix Redundant (primary/secondary or daisy chain) RJ-45 connectors and SFP (fiber) connectors Individual channel selection and monitoring using the front panel headphone jack Level metering on the front panel OLED display Supports Dante and AES67 P/N: Synapse D32o-D (DB-25 audio connectors) P/N: Synapse D32o-TB (Phoenix terminal block audio connectors) Synapse D16Mio 16in/16out Interface w/db25 or 3-Pin Depluggable Connectors 16 balanced mic/line level inputs (studio-grade mic preamps) and 16 balanced line outputs either DB-25 or 3-Pin Phoenix Redundant (primary/secondary or daisy chain) RJ-45 connectors and SFP (fiber) connectors Individual channel selection and monitoring using the front panel headphone jack Level metering on the front panel OLED display Supports Dante and AES67 P/N: Synapse D16Mio-D (DB-25 audio connectors) P/N: Synapse D16Mio-TB (Phoenix terminal block audio connectors) PAGE 3
Synapse DM1 128 Channel Dante/AES67 Network Audio Monitor Monitor up to 128 Dante/AES67 though internal speakers or headphone jack Redundant (primary/secondary or daisy chain) RJ-45 connectors and SFP (fiber) connectors Two balanced XLR audio inputs that can be introduced onto the audio network Two balanced XLR audio outputs to allow audio monitoring on external speakers One two-channel AES3 digital output to allow audio monitoring on external speakers BNC Word Clock input and output to allow the DM1 to sync to or source a house clock Level metering on the front panel OLED display Supports Dante and AES67 P/N: Synapse DM1 PAGE 4
undio2x2+ 2x2 Channel I/O Interface 2 Mic/Line balanced analog inputs supporting 12 db (pad active), 0dB, +15dB, +30dB and +45 db gain (software selectable) 2 line level balanced analog outputs (0dB to 60dB plus mute software selectable) Input gain, output gain, and +48V phantom power controllable via software over the network Powered by either IEEE 802.3af PoE or +24VDC from an external supply Small form factor, can be unobtrusively located near analog sources or sinks +48V phantom power per channel P/N: undio2x2+ -C (Dante proprietary Control) P/N: undio2x2+ -U (UDP 3rd Party Control) und4i-l 4 Channel Input Interface w/ Logic I/O 4 Mic/Line balanced analog inputs supporting 0dB, +15dB, +30dB, +45dB gains plus a 12dB pad Input gain and +48V phantom power controllable via software over the network Powered by either IEEE 802.3af PoE or +24VDC from an external supply Daisy chaining for both audio data and power (3 und4is on one CAT5/6 with PoE, 6 with external supply) 4 Logic Ins and 4 Logic Outs, monitored and controlled via software over the network Supports Dante and AES67 P/N: und4i-l-c (Dante proprietary Control) P/N: und4i-l-u (UDP 3rd Party Control) PAGE 5
undusb 2x2 Channel Dante to USB Bridge 2 input and 2 output Dante to USB bridge Enumerates as a standard USB audio device, so no drivers needed on Windows or OSX Powered by either IEEE 802.3af PoE, +9VDC - +24VDC from an external supply, or through Power Link Front panel power and system status indicators Supports Dante and AES67 P/N: undusb undaes-o 4 Channel Dante to AES3 Bridge 2 balanced XLR AES3 outputs supporting four AES3 output channels @ 44.1kHz/48kHz/88.2kHz/96kHz Daisy chaining for both audio data and power Powered by either IEEE 802.3af PoE, +24VDC from an external supply, or through Power Link Front panel power and system status indicators Supports Dante and AES67 P/N: undaes-o PAGE 6
und4o 4 Output Interface 4 line level balanced analog outputs with +20dBu maximum output levels Powered by either IEEE 802.3af PoE or +24VDC from an external supply Front panel power and system status indicators Supports Dante and AES67 P/N: und4o unhx2d Dante-enabled HDMI Audio De-embedder/Embedder HDMI 2.0 compliant (HDCP 2.2) pass-through support for up to 4K/60/4:4:4 video, 2 channel PCM audio Highly configurable routing between system inputs and outputs allow PCM HDMI audio from both HDMI sources and monitors to be bridged over the Dante network 170ms of adjustable lip sync delay on the Dante TX 1-2 audio output path Installer adjustable EDID management settings via software Powered by either IEEE 802.3af PoE or a +24VDC from an external supply Supports Dante and AES67 P/N: unhx2d-c (Dante proprietary Control) P/N: unhx2d-u (UDP 3rd Party Control) PAGE 7
Axon D2FLEXio 2x0/1x1/0x2 Line Level I/O Interface 2 line level balanced flex I/O with +24dBu maximum input and output levels Powered by either IEEE 802.3af PoE or +24VDC from an external supply Individual input gain, output level, and mode (input or output) controls for each flex I/O Extremely cost-effective installation grade Dante/AES67 analog to network connectivity Supports Dante and AES67 P/N: Axon D2FLEXio undnemo 64 Channel Network Monitor w/usb undnemo-bt 64 Channel Network Monitor w/usb plus Bluetooth connectivity BlueTooth audio connectivity for BT headsets (undnemo-bt only) Easy user monitoring of up to 64 Dante channels through built-in speaker or headphone interface Daisy chaining for Dante audio data Powered by either IEEE 802.3af PoE or a +24VDC from an external supply Intuitive user interface and USB driverless connectivity See Accessories section of the catalog for the Sennheiser MC Pro 2 UC Bluetooth headset for use with the undnemo-bt P/N: undnemo P/N: undnemo-bt (with Bluetooth connectivity) P/N: undnemo-bt /HS (bundle with a BT headset) PAGE 8
Zip4 Dante-enabled 4-Zone Paging Station, 2 Gang US Bi-color (red/green) Ready, Busy, and Zone Status LEDs can indicate zone and system status, driven by the PMS controller Integrates directly with Q-SYS PA Router functionality running on a QSC Core series DSP with a dedicated Zip4 control plugin for Q-SYS Designer Network commands control the brightness and color of all status LEDs, solid on or blinking, and backlight brightness Supports Dante and AES67 P/N: Zip4 *Mic accessory sold separately Zip4-3G Dante-enabled 4-Zone Paging Station, 3 Gang US 3 Gang in-wall or deskmount paging station (desktop enclosure accessory sold separately). Integrates directly with Q-SYS PA Router functionality running on a QSC Core series DSP with a dedicated Zip4 control plugin for Q-SYS Designer Network commands control the brightness and color of all status LEDs, solid on or blinking, and backlight brightness Supports Dante and AES67 P/N: Zip4-3G PAGE 9
undx2io+ 4x2 Channel 2 Gang US Wall Plate w/xlr and De-pluggable I/O 2 Mic/Line balanced analog inputs supporting 0dB, +15dB, +25dB and +40dB gain 2 separate line level balanced inputs on the side of the unit 2 line level balanced analog outputs Input gain and +48V phantom power controllable via software over the network Black and white inserts and Decora plates included P/N: undx2io+ -C (Dante proprietary Control) P/N: undx2io+ -U (UDP 3rd Party Control) P/N: undx2io+ -B (Biamp Tesira Control) Side panel outputs can be used with the unxp2i single-gang passive wall plate (see Accessories page for ordering information) und3io 2x2 Channel 2 Gang US Wall Plate w/xlr, RCA, 3.5mm I/O 1 Mic/Line balanced analog input supporting 0dB, +25dB, and +40dB gain 1 line level balanced analog output 2 RCA (summed to mono) and 1 stereo 3.5mm (summed to mono) inputs 1 3.5mm stereo output Input gain, output gain, and +48V phantom power controllable via software over the network P/N: und3io-w-c (White finish, Dante proprietary Control) P/N: und3io-w-u (White finish, UDP 3rd Party Control) P/N: und3io-b-c (Black finish, Dante proprietary Control) P/N: und3io-b-u (Black finish, UDP 3rd Party Control) PAGE 10
undx4i 4x2 Channel 2 Gang US Wall Plate w/xlr Inputs and Depluggable Outputs 4 Mic/Line balanced analog inputs supporting 0dB, +25dB, and +40dB gain 2 side mounted line level balanced analog outputs on depluggable connectors Input gain and +48V phantom power controllable via software over the network Black and white inserts and Decora plates included P/N: undx4i-c (Dante proprietary Control) P/N: undx4i-u (UDP 3rd Party Control) P/N: undx4i-b (Biamp Tesira Control) Side panel outputs can be used with the unxp2o single-gang passive wall plate (see Accessories page for ordering information) und6io 4x2 Channel 2 Gang US Wall Plate w/xlr, RCA, 3.5mm, and Depluggable I/O 2 Mic/Line balanced analog inputs supporting 0dB, +25dB, and +40dB gain 2 side mounted line level balanced analog outputs on depluggable connectors 2 RCA and 1 stereo 3.5mm inputs 1 3.5mm stereo output Input gain, output gain, and +48V phantom power controllable via software over the network Black and white inserts and Decora plates included P/N: und6io-c (Dante proprietary Control) P/N: und6io-u (UDP 3rd Party Control) P/N: und6io-b (Biamp Tesira Control) Side panel outputs can be used with the unxp2o single-gang passive wall plate (see Accessories page for ordering information) PAGE 11
und6io-bt 4x2 Channel 2 Gang US Wall Plate w/bluetooth Stereo Bluetooth audio streaming from a BT device onto a Dante network Simple device pairing 2 RCA and 1 stereo 3.5mm inputs 1 3.5mm stereo output Output gain controllable via software over the network Black and white inserts and Decora plates included P/N: und6io-bt-c (Dante proprietary Control) P/N: und6io-bt-u (UDP 3 rd Party Control) PAGE 12
AES67 Product Group unax2io+ 4x2 Channel 2 Gang US Wall Plate w/xlr and De-pluggable I/O 2 Mic/Line balanced analog inputs supporting 0dB, +15dB, +25dB and +40dB gain 2 front pane XLR line level balanced analog outputs 2 separate line level balanced inputs on the side of the unit Input gain and +48V phantom power controllable via software over the network Black and white inserts and Decora plates included P/N: unax2io+ (UDP 3rd Party Control) Side panel inputs can be used with the unxp2i single-gang passive wall plate (see Accessories page for ordering information) unax4i 4x2 Channel 2 Gang US Wall Plate w/xlr Inputs and Depluggable Outputs 4 Mic/Line balanced analog inputs supporting 0dB, +25dB, and +40dB gain 2 side mounted line level balanced analog outputs on depluggable connectors Input gain and +48V phantom power controllable via software over the network Black and white inserts and Decora plates included P/N: unax4i (UDP 3rd Party Control) Side panel outputs can be used with the unxp2o single-gang passive wall plate (see Accessories page for ordering information) PAGE 13
una6io 4x2 Channel 2 Gang US Wall Plate w/xlr, RCA, 3.5mm, and Depluggable I/O 2 Mic/Line balanced analog inputs supporting 0dB, +25dB, and +40dB gain 2 RCA and 1 stereo 3.5mm inputs 1 3.5mm stereo output 2 line level balanced outputs on the side of the unit Input gain, output gain, and +48V phantom power controllable via software over the network Black and white inserts and Decora plates included P/N: una6io (UDP 3rd Party Control) Side panel outputs can be used with the unxp2o single-gang passive wall plate (see Accessories page for ordering information) una6io-bt 4x2 Channel 2 Gang US Wall Plate w/bluetooth Stereo Bluetooth audio streaming from a BT device onto an AES67 network Simple device pairing 2 line level balanced analog output 2 RCA and 1 stereo 3.5mm inputs 1 3.5mm stereo output Output gain controllable via software over the network Black and white inserts and Decora plates included P/N: una6io-bt (UDP 3rd Party Control) PAGE 14
unaio2x2+ 2x2 Channel I/O AES67 Interface 2 Mic/Line balanced analog inputs supporting 12 db (pad active), 0dB, +15dB, +30dB and +45 db gain (software selectable) 2 line level balanced analog outputs (0dB to 60dB plus mute software selectable) Input gain, output gain, and +48V phantom power controllable via software over the network Powered by either IEEE 802.3af PoE or +24VDC from an external supply Small form factor, can be unobtrusively located near analog sources or sinks Dual power (DC or PoE) means the unaio2x2+ will work in systems with either standard or PoE Ethernet switches +48V phantom power per channel Built-in tone generator for audio system diagnostics AES67 is compatible with all QSC Core DSPs P/N: unaio2x2+ (UDP 3 rd Party Control) PAGE 15
A4FLEX 4x0/3x1/2x2 Channel Mic/Line I/O AES67 Interface 2 mic/line inputs (IN 1 and 2) with 42dB gain range (1dB steps) plus input pad 2 flex I/Os (I/O 3 and 4) with mic/line inputs like IN 1 and 2 or mic/line level outputs software selectable Input gain, output gain, and +48V phantom power controllable via software over the network Powered by either IEEE 802.3af PoE, 802.3at PoE+ or +24VDC from an external supply Small form factor with under table mounting brackets, can be unobtrusively located where needed Power Link allows two A4FLEX units to be powered from one PoE+ network connection +48V phantom power per channel Built-in tone generator for audio system diagnostics AES67 is compatible with all QSC Core DSPs and all Dante AES67-enabled DSPs Available Q2 2019 P/N: Axon A4FLEX (UDP 3rd Party Control) PAGE 16
Analog Product Group unbt2a Stereo Bluetooth to Analog Interface, 1 Gang US Wall Plate Stereo Bluetooth audio connectivity with simple device pairing Balanced analog stereo line level output signals RS-232 control for flexible user experience Black and white inserts and Decora plates, unbt2a-exp, and power supply included P/N: unbt2a PAGE 17
Control Product Group Axon C1 Networked volume/preset controller, 1 Gang US Wall Plate Networked control designed to work with many DSP platforms Q-SYS plug-in with simple control of volume and preset recall Customizable OLED display for flexible system control Simple menu navigation for ease of use Black and white inserts and Decora plates included P/N: Axon C1 PAGE 18
12VDC Power Supply Worldwide wall plug Accessories P/N: 12VDC Power Supply 24VDC Power Supply Worldwide wall plug 24VDC Power Supply Worldwide desk top 1-Gang Back Box New work back box 2-Gang Back Box New work back box Old Work Bracket 1-gang drywall bracket Old Work Bracket 2-gang drywall bracket P/N: 24VDC Power Supply (wall) P/N: 24VDC Power Supply (wall) P/N: 1-Gang Back Box P/N: 2-Gang Back Box P/N: 1-Gang Old Work Bracket P/N: 2-Gang Old Work Bracket 1 Gig Fiber Module - for Synapse products P/N: 1 Gig Fiber Module unxp2i - 1 Gang Passive Plate Two female XLR connectors Comes with black and white insert and Decora plates P/N: unxp2i unxp2o - 1 Gang Passive Plate Two male XLR connectors Comes with black and white insert and Decora plates P/N: unxp2o PAGE 19
Accessories Zip4 PTT Mic - Standard Astatic 611L, RJ-45 terminated, mechanical mic clip P/N: Zip4 PTT Mic Standard Zip4 PTT Mic - Magnetic Astatic 611L, RJ-45 terminated, mechanical mic clip P/N: Zip4 PTT Mic Magnetic Zip4 Magnetic Mic Base Replaces the mechanical mic clip on the Zip4 For use with the Zip4 PTT Mic Magnetic P/N: Zip4 Magnetic Mic Base 2 Gang Desktop Enclosure P/N: Zip4 2 Gang Desktop 2-Gang sloped front desktop enclosure, steel, black, Zip4 compatible Includes rear panel RJ-45 through connector and 4 CAT-5E connector cable (Note: Zip4 not included, order separately) 3 Gang Desktop Enclosure P/N: Zip4 3 Gang Desktop 3-Gang sloped front desktop enclosure, steel, black, Zip4-3G compatible Includes rear panel RJ-45 through connector and 4 CAT-5E connector cable (Note: Zip4-3G not included, order separately) PAGE 20
Accessories Zip4 2 Gang Wall Mount 2-Gang on-wall plastic mounting enclosure, gray P/N: Zip4 2 Gang Wall Mount 3.5mm I/O Cover Kit, White Pack of 5* 3.5mm I/O Cover Kit, Black Pack of 5* P/N: 3.5mm Cover Kit - W P/N: 3.5mm Cover Kit - B * I/O Cover Kits provide a solution for concealing any 3.5 mm I/O on the wall plate products if the application doesn t require this functionality. PAGE 21