www.lightemotion.com.au LEDBAR1812 Outdoor 1m LED Bar 18 x 12W 6-in-1 RGB LEDs User s instruction manual This manual contains important information about the safe installation and use of this product Please read this instruction manual carefully before installing or operating Please keep these instructions in a safe place for future reference V1.00
Contents 1. Safety Instructions 2 2. Installation 3 3. Features 3 4. Menu Operation 4 5. DMX Tables 5 5a. 2 Channel Mode 5 5b. 6 Channel Mode 6 5c. 8 Channel Mode 6 5d. 11 Channel Mode 6 5e. 108 Channel Mode 7 5f. 110 Channel Mode 8 6. DMX Connection 9 7. DMX Address Setting 9 8. DMX Terminator 10 9. Cleaning and Maintenance 10 10. Technical Data 10 11. Warranty 11 1
Introduction Thank you for the purchase of your LEDBAR18012 Outdoor 1m LED bar with 18 x 12w 6-in-1 LEDs by Light Emotion. We are confident you will be satisfied with your purchase and enjoy many years of use from this Professional Light Emotion product. Please read these instructions carefully to ensure the product is well look after and used correctly to avoid any potential problems. Please note that as part of our ongoing commitment to continuous improvement and product development, the specifications in this manual are subject to change without notice. Whilst every care has been taken in the preparation of this manual we reserve the right to change specifications in the course of product improvement. What is in the box: - 1 x LEDBAR1812 Lighting Effect - 1 x Power Cable - This user manual and warranty card 1. Safety Instructions: Please read these instructions carefully. It includes important information about the installation usage and maintenance of this product. - Please keep this User Manual for future consultation. If you sell the unit to another user, be sure that they also receive this instruction booklet. - Always make sure that you are connecting to the proper voltage and that the line voltage you are connecting to is not higher than that stated on the sticker of the fixture. - This is an outdoor water-proof rated unit. In order to ensure the fixture remains water-proof, do not attempt to disassemble as in doing so the rubber seals and the like that help keep the product water-proof may be damaged. - Use only compatible water-proof cables for installation and connection - Product can be used indoors as well - Make sure there are no flammable materials close to the unit while operating. - The unit must be installed in a location with adequate ventilation, at least 50cm from adjacent surface. Be sure that no ventilation slots are blocked. - Always disconnect from power source before servicing. - Secure fixture to stands, trussing and the like using a safety chain. - Maximum ambient temperature is 50 C. Do not operate fixture at temperatures higher than this. 2
- In the event of serious operating problem, stop using the unit immediately. Never try to repair the unit by yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please contact the nearest authorized technical assistance center. - Make sure power cord is never crimped or damaged. - Never disconnect power cord by pulling or tugging on the cord. - Never carry the fixture directly from the cord. Carry by holding the chassis of the unit. - Avoid direct eye exposure to the light source while it is on. 2. Installation: Caution: For safe mounting of this product, please read the following carefully. - When mounting the product, do not stand directly underneath the product. - When mounting in fixed installation, use the provided brackets. Please ensure the unit is being attached securely to any surface consult a professional for the installation if need be. - For outdoor installations be sure that proper IP rated cables are used compatible with the connections that come with the product. - Always use a safety chain when mounting the product on stands, trussing or bars. Make sure the breaking strain rating of the chain is at least 10 times the weight of the product. - Product will work in any orientation. - Make sure there is adequate ventilation around the product. - Never look directly into the LED light sources of the product. - Keep out of reach of children. 3. Features This product is designed as an outdoor professional LED flood lighting effect and is only intended to be used as such for entertainment, display and architectural applications. Due to our ongoing commitment to constantly reviewing and improving products, features and specifications are subject to change without prior notice. - LEDs: 18 x 12W RGBWAUV HEX 6-in-1 LEDs with average 50000 hours lifespan - Beam angle:15º - Control: DMX or on-board built-in programs - 6 different DMX modes to suit users needs - DMX Channels: 2/6/8/11/108/110 - Functions: Colour mixing and fading, single colour, patterns, individual pixel control - Electronic strobe rate: 1-25Hz - Built in colour macros and programs - Extruded rugged Aluminium housing - IP65 rated - Weight: 10kg / 12kg gross - Packed Dimensions 1060x130x150mm 3
4. Menu Operation Used for setting up or operating the product without DMX control: Menu: Press each time to access features see table below: UP: Increase setting DOWN: Decrease setting Enter: Confirm and save setting. No Display Show Numerical Value Function and Description 1 d001 001-512 DMX512 starting address setting Fast DMX512 address settings: 2 ID01 ID01-ID50 ID1: is 1 st fixture, ID2 is 2 nd fixture, etc. 3 CL 1 01-08 8 kinds of colour output 4 FF99 00-99 RGB strobe, speed from slow to fast 5 1JP0 0-9 Effect 1, speed from slow to fast 6 2JP0 0-9 Effect 2, speed from slow to fast 7 3JP0 0-9 Effect 3, speed from slow to fast 8 4JP0 0-9 Effect 4, speed from slow to fast 9 5JP0 0-9 Effect 5, speed from slow to fast 10 6JP0 0-9 Effect 6, speed from slow to fast 11 7JP0 0-9 Effect 7, speed from slow to fast 12 8JP0 0-9 Effect 8, speed from slow to fast 13 9JP0 0-9 Effect 1-8 rotation, speed from slow to fast 14 1dE0 0-9 Red fading, speed from slow to fast 15 2dE0 0-9 Green fading, speed from slow to fast 16 3dE0 0-9 Blue fading, speed from slow to fast 17 4dE0 0-9 UV fading, speed from slow to fast 18 5dE0 0-9 Amber fading, speed from slow to fast 19 6dE0 0-9 R,G,B,W,UV,A fading rotation, speed from slow to fast 20 Sud0 0-9 Sound control, speed from slow to fast 21 CH11 2/6/8/ 11/108/110 DMX channel mode setting 4
5. DMX Channel Allocation and functions tables. There are 6 different DMX profiles for this fixture. This allows the user to use simple overall control over fewer DMX channels or for the user to individually control each individual feature of the light over many more channels. You must choose the DMX mode/profile prior to setting up with DMX. When using multiple fixtures, all fixtures should be set to the same DMX profile for simplicity of control and DMX address allocation. Channel CH1 5a. Two channel DMX mode: DMX value 000-005 No effect 006-016 LED colour selection: red 017-027 LED colour selection: green 028-038 LED colour selection: blue 039-049 LED colour selection: amber 050-060 LED colour selection: UV 061-071 LED colour selection: cyan 072-082 LED colour selection: white 083-093 effect-1 094-104 effect-2 105-115 effect-3 116-126 effect-4 127-137 effect-5 138-148 effect-6 149-159 effect-7 160-170 effect-8 171-181 effect 1-8 rotation 182-192 Red fading 193-203 Green fading 204-214 Blue fading 215-225 UV fading 226-236 Amber fading 237-247 Roation fading effect 248-255 Sound control CH2 000-255 Function speed, from slow to fast Function Description 5
5b. Six Channel DMX Mode Channel DMX value Function Description CH1 000-255 Red dimming, from dark to bright CH2 000-255 Green dimming, from dark to bright CH3 000-255 Blue dimming, from dark to bright CH4 000-255 White dimming, from dark to bright CH5 000-255 Amber dimming, from dark to bright CH6 000-255 UV dimming, from dark to bright 5c. Eight channel DMX Mode Channel DMX value Function Description CH1 000-255 Master dimming,from dark to bright CH2 000-255 Strobe, from slow to fast CH3 000-255 Red dimming, from dark to bright CH4 000-255 Green dimming, from dark to bright CH5 000-255 Blue dimming, from dark to bright CH6 000-255 White dimming, from dark to bright CH7 000-255 Amber dimming, from dark to bright CH8 000-255 UV dimming, from dark to bright 5d. Eleven Channel DMX Mode Channel DMX value Function Description CH1 000-255 Master dimming,from dark to bright CH2 007-255 Master Strobe, from slow to fast 000-005 No action 006-015 Custom running effect selection and built-in programs 016-025 CH1:Dimming 026-035 CH2:Simultaneously superimposed strobe effect 036-045 CH4:The effect of running speed selection; 046-055 CH5:Background colour selection; 056-065 CH6-CH11:Running colour selection; CH3 066-075 076-085 086-095 096-105 106-115 116-125 126-135 136-145 Built-in running effect 1 146-155 Built-in running effect 2 6
156-165 Built-in running effect 3 166-175 Built-in running effect 4 176-185 Built-in running effect 5 186-195 Built-in running effect 6 196-205 Built-in running effect 7 206-215 Built-in running effect 8 216-225 Built-in Circulation fading effect 226-235 Yellow fading effect 236-245 Circulation built-in fading effect 246-255 Sound control CH4 000-255 Function speed, from slow to fast CH5 000-255 When effect custom effect, choose the background colour CH6 000-255 Red dimming, from dark to bright CH7 000-255 Green dimming, from dark to bright CH8 000-255 Blue dimming, from dark to bright CH9 000-255 White dimming, from dark to bright CH10 000-255 Amber dimming, from dark to bright CH11 000-255 UV dimming, from dark to bright 5e. 108 Channel DMX Mode Channel DMX value Function Description CH1 000-255 R1 dimming, from dark to bright CH2 000-255 G1 dimming, from dark to bright CH3 000-255 B1 dimming, from dark to bright CH4 000-255 W1 dimming, from dark to bright CH5 000-255 A1 dimming, from dark to bright CH6 000-255 UV1 dimming, from dark to bright CH7 000-255 R2 dimming, from dark to bright CH8 000-255 G2 dimming, from dark to bright CH9 000-255 B2 dimming, from dark to bright CH10 000-255 W2 dimming, from dark to bright CH11 000-255 A2 dimming, from dark to bright CH12 000-255 UV2 dimming, from dark to bright.................. CH103 000-255 R18 dimming, from dark to bright CH104 000-255 G18 dimming, from dark to bright CH105 000-255 B18 dimming, from dark to bright CH106 000-255 W18 dimming, from dark to bright CH107 000-255 A18 dimming, from dark to bright CH108 000-255 UV18 dimming, from dark to bright 7
5f. 110 Channel DMX Mode Channel DMX value Function Description CH1 000-255 Master dimming,from dark to bright CH2 007-255 Master Strobe, from slow to fast CH3 000-255 R1 dimming, from dark to bright CH4 000-255 G1 dimming, from dark to bright CH5 000-255 B1 dimming, from dark to bright CH6 000-255 W1 dimming, from dark to bright CH7 000-255 A1 dimming, from dark to bright CH8 000-255 UV1 dimming, from dark to bright CH9 000-255 R2 dimming, from dark to bright CH10 000-255 G2 dimming, from dark to bright CH11 000-255 B2 dimming, from dark to bright CH12 000-255 W2 dimming, from dark to bright CH13 000-255 A2 dimming, from dark to bright CH14 000-255 UV2 dimming, from dark to bright.................. CH105 000-255 R18 dimming, from dark to bright CH106 000-255 G18 dimming, from dark to bright CH107 000-255 B18 dimming, from dark to bright CH108 000-255 W18 dimming, from dark to bright CH109 000-255 A18 dimming, from dark to bright CH110 000-255 UV18 dimming, from dark to bright 8
6. DMX-512 Control Connection Using a 3 pin XLR cable, you can connect the product to a DMX controller and then to other fixtures with 3 pin XLR inputs and outputs. When not using DMX, multiple fixtures can be connected together and operate under master/slave control. The signal cable should have two core with shielded cable, the signal connectors are XLR input and output connectors. Please refer to the below diagram: 7. DMX Address Setting When being used in conjunction with a DMX controller, each fixture must be set a specific starting address. When receiving signal, fixture will receive channel control signals of this address from the DMX controller. For simplicity, the user can use the same address for multiple fixtures but this will result in each fixture providing exactly the same output and fixtures with the same DMX address cannot be individually controlled. To control each fixture individually via DMX, each fixture must have its own unique DMX address. Depending upon which DMX mode this fixture is set in, the individual DMX addresses must be separated by at least the same number of channels. For example in 9 channel mode, the DMX addresses must be at least 9 channels apart. So for example assuming the first fixture is DMX channel 1 and we are in 9 channel DMX mode, the second fixture would need to be on channel 10, then the 3 rd channel 19 and so on. Some DMX controllers may group fixtures in lots of 16 channels so in that case, fixture 1 on channel 1, fixture 2 on channel 17, 3 on 33, and so on. Refer to your DMX controllers instruction manual on how best to manage your DMX channel allocation. 9
8. DMX Terminator: A DMX terminator helps to reduce noise on the DMX chain, and makes the light respond to control more accurately. It should be plugged in to the last fixture in any chain. For Terminator connections please see below: 9. Cleaning and maintenance From time to time it is recommended the product is cleaned to ensure maximum light output and performance. Use a wet cloth to clean the housing as well as the lenses and base. Glass cleaner is also suitable but alcohol based cleaners and solvents cannot be used as they will cause damage to the product. When used in a fixed long term installation such as a venue or club, the unit should be periodically taken down from the installation and professionally cleaned. Dust build-up within the unit can cause damage and ultimately failure of components. 10. Technical Data - Input voltage: 90-240VAC, 50 or 60Hz - Power consumption: 220W - LEDs: 18 x 12W RGBWAUV HEX 6-in-1 LEDs with average 50000 hours lifespan - Beam angle: 15º - Control: DMX or on-board built-in programs - 6 different DMX modes to suit users needs - DMX Channels: 2/6/8/11/108/110 - Functions: Colour mixing and fading, single colour, patterns, individual pixel control - Electronic strobe rate: 1-25Hz - Built in colour macros and programs - Extruded rugged Aluminium housing - Cooling via Aluminium housing - IP65 rated - Weight: 10kg / 12kg gross - Packed Dimensions 1060x130x150mm 10
11. Warranty This product is warranted for 12 months from your purchase date. We are confident that this product will give many years of trouble-free operation but should an unlikely problem arise, warranty claims must be via the original place of purchase, together with the original purchase receipt. Please keep both your original purchase receipt and this instruction manual together and in a safe place for future reference. Should the product be sold within the warranty period, be sure to pass on both to the new purchaser so they are able to claim warranty should they need to. We recommend you register your warranty online at www.industrygear.com.au. Purchased from: Contact Details: Date Purchased: Invoice/Receipt Number: Copyright Light Emotion 2016. E&OE Exclusively imported by LSW Imports and Distribution PO Box 887, Kingsgrove, NSW, 2208 sales@lswonline.com.au www.lightemotion.com.au 1800 643 111 (within Australia) +612 9718 4900 (outside of Australia) 11