Switched-Mode Power Supplies.,,, VDC Output Nominal output current [ADC] Input, -phase Input, -/-phase EN 0 curus 090 Approvals culus 0 GL ANSI/ISA.. ATEX/IEC Ex DC OK signal/contact RS- serial interface TopBoost * PowerBoost Efficiency, typ. [%] Ambient operating temperature [ C] **** Item Number Page Output: VDC..0 +0-00 Output: VDC.0.0 +0.0 0.0 +0.0.0 +0.0.0 +0.0.0 +0..0 +0.0.0 +0 0.0. +0.0.0 +0.0 90.0 +0..0 +0.0.0 +0.0 9.0 +0.0 9.0 +0 0.0 9.0 +0 0.0 9.0 +0 0.0 9.0 +0 0.0 9. +0-0** -00 -** -0-9 -0 - - - - Output: VDC -0 9 Output: VDC - - - - 9 - - - Nominal input voltage [VDC] Nominal voltage output [VDC] Nominal output current [A] curus 090 culus 0 Approvals GL ANSI/ISA.. ATEX/IEC Ex EN 0 DC OK signal/contact Efficiency, typ. [%] Ambient operating temperature [ C] Item Number Page.0.0 0.. +0.0 0.0 0. 9.0 +0.0.0 0. 9.0 +0.0.0 0. 90.0 +0.0 /0/ 0.. +0 0.0.0.0.0 0 +0.0.0.0.0 0 +0-0 -0-0 -0-0 -0 9-0/00-0000 9 yes pending * TopBoost enables magnetic tripping of circuit breakers in the output circuit. ** Class Power Unit acc. to curus 0 or curus 090 *** with uninterruptible power supply (UPS) **** Device starts at -0 C type-tested for -xx, -0xx, -xx
EPSITRON COMPACT Power Series H L W Technical Data Input Frequency 0 Hz Inrush current < 0 A, NTC Output Nominal output voltage U o nom VDC (SELV) Output current I o.0 A at VDC, max.. A in any mounting position Factory preset VDC Residual ripple < 00 mv (peak-to-peak) up to 0 MHz Current limitation. x I o typ. Overload behavior Constant current Operational indication LED green (U o ) Fuse Protection Internal fuse T A / VDC External fuse Electronic circuit breaker A, 0 A, B, C characteristic EN 090, EN 0-, EN 0--, EN 0 *, UL 090 *, UL 0 *, GL * * (pending) Environmental Requirements Ambient operating temperature -0 +0 C Storage temperature -0 + C Relative humidity 9 % (varnished PCB) Derating -. % / K (> C) Degree of pollution (acc. to EN 0) Climatic category K (acc. to EN 0) Shock and vibration Category, Class B (per EN :00) Safety and Protection Enclosure Plastic, light gray, Flammability class V0 acc. to UL9 Test voltage PRI-SEC. kv (DC) Protection class II Degree of protection IP0 per EN 09 Overvoltage category II Varistor (input side); Overvoltage protection internal protective circuit, < 0 VDC (output side in case of an error) Short-circuit-protection No-load proof Feedback voltage Max. VDC Parallel operation Series connection MTBF > 00,000 h Fire load MJ Connection and Type of Mounting Connectors Input/Output: WAGO 0 Series Conductor range Input/Output: 0.0. mm² / AWG Strip length Input/Output: mm / 0. 0. inch Type of mounting D-rail mounting (EN 0) Dimensions and Weight Dimensions (mm) W x H x L x 9 x 9, Length: mm from upper-edge of D- rail Weight 0 g
Similar to pictured device + - - + COMPACT Power, input voltage: 0 VDC, output: VDC / A -0 COMPACT Power, input voltage: VDC, output: VDC / A -0/0-000 Nominal input voltage U i nom 0 VDC VDC Input voltage range 0 VDC 0 90 VDC Input current I i 0. A at VDC; 0. A at 0 VDC 0.9 A at VDC Mains failure hold-up time > ms at VDC; > ms at 0 VDC > ms at VDC Adjustment accuracy 0 % % Efficiency % (typ.) % (typ.) Power loss P V.9 W (0 VDC/no load), 9.9 W (0 VDC/nominal load).0 W ( VDC/no load), 9.0 W ( VDC/nominal load) Power loss P V (max.) 9.9 W typ. ( VDC / VDC, A) 0. W typ. (0 VDC / VDC, A) 9
EPSITRON Series < 9, mm/. in. > < 9 mm/. in. > _> mm/0. in. Features: DC/DC Converter in a compact mm housing -xx LC/DC Converters supply devices with, 0, or VDC from a power supply with or VDC, with an output power up to W. Output voltage monitoring via DC OK contact Can be commoned with and Series devices Comprehensive range of approvals for multiple applications _> Technical Data Input Inrush current < 0. A ( ms, at nominal input voltage) Output Output current I o 0. A Mains/load regulation < % Residual ripple 0 mv (peak-to-peak) Operational indication LED green (Uo), LED red (short circuit) Signaling DC OK contact (Ui, max. ma) Fuse Protection Internal fuse None Environmental Requirements Ambient operating temperature - +0 C Storage temperature -0 + C Relative humidity 9 % (no condensation permissible) Derating No derating Degree of pollution (acc. to EN 0) Climatic category K (acc. to EN 0, except for low air pressure) Safety and Protection Protection class III Reverse voltage protection Degree of protection IP0 per EN 09 Short-circuit-protection No-load proof Parallel operation No Series connection No MTBF >,00,000 h Connection and Type of Mounting Connection technology Push-in CAGE CLAMP (WAGO Series) Conductor range solid: 0.0. mm² / AWG fine-stranded: 0.. mm² / AWG Strip length 9 0 mm / 0. 0.9 inch Type of mounting D-rail mounting (EN 0) Dimensions and Weight Dimensions (mm) W x H x L x 9. x 9, Height from upper-edge of D- rail Weight g 0
input voltage: VDC, output: VDC / 0. A -0 input voltage: VDC, output: 0 VDC / 0. A -0 Nominal input voltage U i nom VDC VDC Input voltage range 0 0 VDC 0 VDC Input current I i < 0. A < 0. A Nominal output voltage U o nom VDC (± %) 0 VDC (± %) Adjustment accuracy < % < % Efficiency >. % (at nominal input voltage and nominal output) > 9 % (at nominal input voltage and nominal output) Power loss P V < 0. W (no load); < 0. W (nominal load) < 0.9 W (no load); < 0. W (nominal load) Feedback voltage V V ; EN 000--, EN 000--, EN 090-, UL 090*, UL 0*, ANSI/ISA..0*, ATEX*, IEC Ex*, GL* (*pending) ; EN 000--, EN 000--, EN 090-, UL 090*, UL 0*, ANSI/ISA..0*, ATEX*, IEC Ex*, GL* (*pending)
EPSITRON Series input voltage: VDC, output: VDC / 0. A -0 input voltage: VDC, output: VDC / 0. A -0 Nominal input voltage U i nom VDC VDC Input voltage range 0 VDC 0 VDC Input current I i < 0. A < 0. A Nominal output voltage U o nom VDC (± %) VDC (± %) Adjustment accuracy < % < % Efficiency > 90 % (at nominal input voltage and nominal output) > 9 % (at nominal input voltage and nominal output) Power loss P V < 0. W (no load); < 0. W (nominal load) < 0.9 W (no load); <. W (nominal load) Feedback voltage V V ; EN 000--, EN 000--, EN 090-, UL 090*, UL 0*, ANSI/ISA..0*, ATEX*, IEC Ex*, GL* (*pending) ; EN 000--, EN 000--, EN 090-, UL 090*; UL 0*; ANSI/ISA..0*; ATEX; IEC Ex*, GL* (*pending)
EPSITRON DC-DC converter, input voltage: VDC, adjustable output voltage: /0/ VDC, output current: 0. A -0 Nominal input voltage U i nom VDC Input voltage range 0 VDC Input current I i < 0. A Nominal output voltage U o nom /0/ VDC (± %) set via DIP switches Adjustment accuracy < % Efficiency >. % (at nominal input voltage and nominal output) Power loss P V < 0. W (no load); < 0. W (nominal load) Feedback voltage V ; EN 000--, EN 000--, EN 090-, UL 090*, UL 0*, ANSI/ISA..0*, ATEX*, IEC Ex*, GL* (*pending)