VT0 TM THE POWER OF VISION KEY FEATURES µtca System Platform / Air Transport Rack (ATR) Short Tall, with NO internal fan (with handle deep) Customized Front Panel Input and Output Connectors per MIL-M999 Single MCH and Power Module slot Up to s: Four mid-size and four compact-size (MCH and Power Module are not included) Radial IC bus to each High-speed routing on 0 layers High-speed µtca connectors (. GHz) FRU information devices with chassis locator Telco Alarm CLK No active components on the backplane RoHS compliant The VT0 is a / ATR µtca Short Tall chassis that provides four mid-size and four compact slots that can accept any.,.,. and/or.. It provides Fabric clock (CLK) to each slot. The VT0 is designed for avionics, space and ground vehicles applications. The VT0 is designed to withstand extreme environmental conditions such as temperature, shock, vibration, chemical, EMI and altitude. The VT0 is made from lightweight aluminium 0-T. The top is removable and utilized stainless steel captive hardware and self-locking helicoils to withstand maximum shock and vibration. Conduction cooling is through precision-machine card guides in the sidewalls. The front panel accommodates MIL style M999 connectors. The front panel can be customized to meet each customer s unique requirements. VadaTech can modify this product to meet special customer requirements without NRE (minimum order placement is required).
SPECIFICATIONS Architecture Height nn Physical Dimensions Width:90.mm Depth 0.mm Type µtca Chassis.0 slots Standards Type.0,.,.,., and. µtca Type Telco Alarm, Single MCH, Power Module and SFM (System Management Module) Configuration Power VT0 Single PM (consult UTC0 data sheet for the power module) Environmental Conformal Coating Other MTBF Certifications Standards Compliance Warranty Trademarks and Logos Temperature Operating Temperature: -0 to 0 C Storage Temperature: - to +9 C Vibration MIL-STD-0E Method. Procedure, Cat. propeller, Cat. Jet aircraft Cat. helicopter (to be tested and verified, by August 009) Shock MIL-STD-0 Method. Procedure 0g, / sine, msec. (to be tested and verified by August 009) Altitude,000 ft. Operating with no external Fan with 0W dissipation Relative Humidity MIL Hand book -F@ TBD Hrs. 0,000 ft. Non-Operating to 9 percent, non-condensing Humiseal A Polyurethane Humiseal B Acrylic Designed to meet FCC, CE and UL certifications where applicable VadaTech is certified to both the ISO900:000 and AS900B:00 standards RoHS and NEBS Two () years The VadaTech logo is a registered trademark of VadaTech, Inc. Other registered trademarks are the property of their respective owners. AdvancedTCA TM and the AdvancedMC TM logo are trademarks of the PCI Industrial Computers Manufacturers Group. All rights reserved. Specification subject to change without notice.
IPMB Bus The IC bus from each is routed radially to the MCH. MCH IPMB IPMB * (Mid-Size), (Compact-Size) FIGURE. VT0 Topology for IC Bus Ports 0 and MCH FABRIC A PORT 0 * (Mid-Size), (Compact-Size) FIGURE. VT0 Topology for Ports 0
Ports and Topology for Ports and with direct connections among the slots (ordering option) MCH FABRIC B PORT * (Mid-Size), (Compact-Size) Topology for Ports to MCH (ordering option) MCH FABRIC B PORT * (Mid-Size), (Compact-Size) FIGURE. VT0 Topology for Ports and
Ports - MCH FABRIC D TO G PORT TO * (Mid-Size), (Compact-Size) FIGURE. VT0 Topology for Ports - with direct connect across two slots MCH FABRIC D TO G PORT TO * (Mid-Size), (Compact-Size) FIGURE. VT0 Topology for Ports -
Clock Options The µtca specifies CLK for possible use as Fabric clock. VT0 routes CLK to each of the slots as Fabric clock. MCH CLK CLK * (Mid-Size), (Compact-Size) FIGURE. VT0 CLK can run as Fabric Clock (i.e. PCIe clock)
Power supply The VT0 has an option for a conduction cool Power Module (PM). The input voltage depends on the PM. If utilizing VadaTech UTC0 power module the input voltage is from 0V to V. Cooling and Temp Sensors The VT0 has a System Management Module (SFM). The SFM allows, if desired for high altitude, to have external Fan to cool the Chassis. The SFM monitors the external FAN by reading it s TACH input. It has temp sensor on board to monitor the internal temp of the chassis. Telco Alarm The VT0 provides Telco Alarm functionality to alert about any anomaly within the chassis. Only the Minor, Major and Critical Alarm LED are routed to the front of the chassis for notification. FRU Information and Carrier Locator The VT0 has FRU information and Carrier Locator. The Carrier Locator is assigned by mechanical dip switches which are easily accessible. The MCH reads the Locator via it s private IC bus. No active components With respect to other µtca chassis in the market, the VT0 has no active components on its back plane. This allows ease of serviceability. End to End Integrated Solution VadaTech has the entire µtca infrastructure: MicroTCA Carrier Hub (product UTC00), Power Module (UTC0), etc. Please consult the appropriate data sheet to obtain more information. VadaTech can integrate any of its over 0 modules, customer s, as well as other third party s into the chassis and deliver a complete system for deployment. Please contact VadaTech Sales for more information.
ORDERING OPTIONS A = Ports - = All ports to MCH = Direct connection per Fig. VT0 - AB0-000 - 00J * B = Ports and = To MCH = Direct connection per Fig. J = Conformal Coating 0 = None = Humiseal A Polyurethane = Humiseal B Acrylic * VadaTech has an MCH (UTC00 and, Power Module (UTC0) as well as over 0 modules. Contact your sales representative for an end-to-end integrated solution. Document No Date:. June 009 Pass Four