Nkia N95 with Tpad Fllw these simply settings t get yur Nkia N95 t cnnect t the Tpad. This Guide cvers: 1. Setting up yur Nkia N95 with Tpad 2. Using Tpad via yur Wireless LAN with the Nkia N95 1. Setting up yur Nkia N95 with Tpad Select Menu > Tls > Settings > Cnnectin > SIP settings > Optins > Add new Set up yur cnfiguratin as fllws:
Prfile name Enter ur netwrk name: Tpad Service prfile Select IETF Default access pint Select the Wireless access pint t use fr the Internet cnnectin. E.g. MyWLAN Public user name Enter yur Tpad Number which yu received frm Tpad. Fr example if the user name is 1123444, then type the fllwing: 1123444@sip.tpad.cm. (n need t enter sip: it added autmatically) Use cmpressin Select N Registratin Select Always. Select Prxy server, t enter the prxy server Settings fr this SIP prfile Prxy server address - Enter the fllwing address: sip.tpad.cm Realm - Enter the fllwing address: sip.tpad.cm User name - Enter yur user name fr example: 1123444 Passwrd - Enter yur Tpad passwrd. Allw lse ruting - Select: Yes Transprt type - Select: UDP Prt - Enter prt number: 5060 Select Back and Select Registrar server t enter the registrar Settings fr this SIP prfile
Registrar serv. Addr.- Enter the fllwing address: sip.tpad.cm Realm - Enter the fllwing address: sip.tpad.cm User name - Enter yur user name Fr example: 1123444 Passwrd - Enter yu Tpad passwrd. Transprt type - Select:UDP Prt - Enter prt number: 5060 Select Back three times, Or Select Menu > Tls > Settings > Cnnectin Select Internet Telephne settings t set up yur Tpad prfile.
Name - Enter Tpad and Press OK SIP prfiles - Select Tpad and Press OK 2. Using Tpad via yur Wireless LAN with the Nkia N95 The fllwing instructin will guide yu hw t register t Tpad netwrk and initiate calls. Select Menu > Cnnect. > internet tel. The phne will register with Tpad using the default access pint defined in the SIP prfile r alternativily it will give yu a list f available WLANs t chse frm.. T make utging Tpad internet calls chse a name frm yur address bk r just dial a number then Press ptin > call > internet call
Defining the yur Wireless LAN access pint T search fr wireless LANs available within range press: Menu > Tls > WLAN Wiz T create an internet access pint in Wireless LAN select Optins > Define access pint. Define the fllwing settings: Cnnectin name Type a descriptive name fr the Internet access pint, such as My WLAN Internet. Data bearer Select Wireless LAN. WLAN netwrk. name T enter the service set identifier (SSID), that is, the name that identifies the specific wireless LAN, select Enter manually. The name must be exactly the same as in yur Wi-Fi ruter. If yu d nt enter the SSID here, yu are nt able t cnnect t netwrks that use a hidden SSID. T select the netwrk frm the wireless LANs in range, select Search fr netwrk. Netwrk status Select Hidden if the netwrk yu are cnnecting t is hidden, r Public if it is nt hidden. WLAN netwrk. mde Select Infrastructure. In this mde, devices can cmmunicate with each their and with wired LAN devices thrugh a wireless LAN access pint. WLAN security mde Yu must select the same security mde that is used in the wireless LAN access pint. If yu select WEP (wired equivalent privacy), 802.1x, r WPA/WPA2 (Wi-Fi prtected access), yu must als cnfigure the relevant additinal settings. If yu selected WEP as the WLAN security mde, define the fllwing in WLAN security settings: WEP key in use Select which WEP key is used (#1-#4). Authenticatin type Select Open r Shared. WEP key settings The remaining settings are defined here: > WEP encryptin Chse 64bit r 128bit depending n what yur Wireless ruter uses > WEP key frmat Chse Hexadecimal r Ascii depending n what yur Wireless ruter uses > WEP key Enter the WEP key cnfigured n yur Wireless Ruter