GV ME GV ME0 Motor circuit-breakers from 0.0 to kw / 00 V, with screw clamp terminals GV ME with pushbutton control 00/ V 00 V 0 V () () () () Id ± 0 % kw ka % kw ka % kw ka % A A k 0. 0.. GV ME0 0.0 0.0 0. 0.. GV ME0 0.0 0.0 0. 0.0 GV ME0 0.0 0. 0. 0. 0.0 0. GV ME0 0.0 0. 0. GV ME0 0.0 0. 0... GV ME0 0.0..... GV ME0 0.0...... GV ME0 0.0. 0 00. GV ME0 0.0. 0.. 0 0 00 00.. 0 GV ME 0.0 0 GV ME 0.0. 0 GV ME0 0.0 0. GV ME 0.0 0 0 GV ME () 0.0 0 0. GV ME 0.0 Motor circuit-breakers from 0.0 to kw / 00 V, with lus To order thermal manetic circuit-breakers with connection by lus, add the diit to the end of reference selected above. Example: GV ME0 becomes GV ME0. Thermal manetic circuit-breakers GV ME with built-in auxiliary contact block With instantaneous auxiliary contact block (composition, see pae /): b GV AE, add suffix AETQ to the motor circuit-breaker reference selected above. Example: GV ME0AETQ. b GV AE, add suffi x AETQ to the motor circuit-breaker reference selected above. Example: GV ME0AETQ. b GV AN, add suffix ANTQ to the motor circuit-breaker reference selected above. Example: GV ME0ANTQ. These circuit-breakers with built-in contact block are sold in lots of 0 units in a sinle pack. 0 () As % of Icu. () The thermal trip settin must be within the marked on the raduated knob. () Maximum ratin which can be mounted in enclosures GV MC or MP, please consult your Reional Sales Offi ce. > 00 ka. paes 0/ to 0/ paes / to / pae / 0-EN_Ver.
(continued) GV ME GV MEpp Motor circuit-breakers from 0.0 to kw, with sprin terminal connections GV ME () with pushbutton control 00/ V 00 V () () () Id ± 0 % kw ka % kw ka % A A k 0. 0.. GV ME0 0.0 0.0 0. 0.. GV ME0 0.0 0.0 0. 0.0 GV ME0 0.0 0. 0. 0. 0. 0. 0.0 0. GV ME0 0.0 0. 0. GV ME0 0.0 0... GV ME0 0.0.... GV ME0 0.0..... GV ME0 0.0. 0 00. GV ME0 0.0. 0 0 00 00 0 GV ME 0.0. 0. 0 GV ME 0.0. 0 GV ME0 0.0 0 0 GV ME 0.0 0 0 GV ME 0.0 Contact blocks Description Mountin Maximum number Instantaneous auxiliary contacts Type of contacts Sold in lots of Unit reference k Front N/O + N/C 0 GV AE 0.00 N/O + N/O 0 GV AE0 0.00 LH side N/O + N/C GV AN 0.00 N/O + N/O GV AN0 0.00 LA D Accessory Description Application Sold in lots of Unit reference k Cable end reducer For connection of conductors from to. mm 0 LA D () For connection of conductors from to. mm, the use of an LA D cable end reducer is recommended. () Maximum ratin which can be mounted in enclosures GV MC or MP, please consult your Reional Sales Offi ce () The thermal trip settin must be within the marked on the raduated knob. > 00 ka. 0 paes 0/ to 0/ paes / to / pae / 0-EN_Ver.
GV P, GV P and GV ME0 0 GV P0 0 GV P GV P paes 0/ to 0/ Motor circuit-breakers from 0.0 to 0 kw / 00 V 00/ V 00 V 0 V () () () () Id ± 0 % kw ka % kw ka % kw ka % A A k GV P: control by rotary knob Screw clamp terminals 0. 0.. GV P0 0.0 0.0 0. 0.. GV P0 0.0 0.0 0. 0.0 GV P0 0.0 0. 0. 0. 0.0 0. GV P0 0.0 0. 0. GV P0 0.0 0. 0... GV P0 0.0.. 00... GV P0 0.0... 00. GV P0 0.0. 00. GV P0 0.0 0 00. 00 0 GV P 0.0.. 00 00 0 GV P 0.0. 0 0 0 00 GV P0 0.0 0 0 0. 00 GV P 0.0 0 0 0 0 GV P 0.0 0. 0 00 GV P 0.0 GV P: control by rotary knob Connection by EverLink BTR screw connectors (). 00 00. 0 0 GV P 0.0. 00 00 0 0 GV P 0.0 00 00 0. 0 0 GV P 0.0 00 00. 0 0 GV P 0.0. 0 00 0 0 0 0 0 GV P0 0.0 0 00 0 0 0 0 00 GV P0 0.0 0 0 00 0 0 0 GV P 0.0 Connection by EverLink BTR screw connectors, for assembly with a contactor To assemble a GV P to P circuit-breaker with an LC D0A to DA contactor, it is possible to use the circuit-breaker supplied without downstream EverLink power terminal block. To order this product, add the diit to the end of the references selected above. Example: GV P becomes GV P. Connection by lus To order thermal manetic circuit-breakers with connection by lus, add the diit to the end of reference selected above. Example: GV P becomes GV P. GV ME0: pushbutton control, screw clamp terminals 0 00 00 0 GV ME0 () 0.00 Motor circuit-breakers up to 0 hp / 00 V, UL 0 type E GV () To obtain a GV P motor circuit-breaker, UL 0 type E, combine: b a circuit-breaker GV PppH (except A), b and a Lare Spacin adapter GV GH. GV () To obtain a motor-circuit-breaker GV P, UL 0 type E, use the followin with the circuit-breaker: b a Lare Spacin cover GV G, b a short-circuit sinallin contact GV AM. GV with connection by lus () To obtain a motor-circuit-breaker GV P, UL 0 type E, with connection by lus, add the diit to the end of reference selected above and use the followin with the circuit-breaker: b two IP 0 covers LAD 0, b a short-circuit sinallin contact GV AM. () As % of Icu. () The thermal trip settin must be within the marked on the raduated knob. () BTR screws: hexaon socket head. Require use of an insulated Allen key, in compliance with local wirin reulations. () Recommended for use in association with a contactor. () Accessory: see pae /. () Accessories: see pae /. > 00 ka. paes / to / 0-EN_Ver.
GV R GV RE0 Thermal-manetic circuit-breakers GV R with screw clamp terminals Control by rocker lever 00/ V 00 V 0/0 V () () () kw ka % kw ka % kw ka % A k. 00 00 00 0 GV RE0.00 00 00 00. 0 0 00 00 0 0 00 00 0 0 00 00 0 GV RS0.00 00 00 00 00. 00 00 GV RE.00 0 0 00 00. 00. 0 0 00 00 00 00. 0 0 00 00 GV RS.00 00 0 GV RE0.00. 0 00. 0 00 0 00 0 GV RS0.00 00 0 00 0 00 0 0 GV RE0.0 GV RS0 0 00 0 0 00 0 0 00 0 0 GV RS0.0 00 0 00 0 0 00 00 00 00 00 0 GV RE0.00 0 00 0 GV RS0.00 00 00 00 0 00 GV RE00.00 0 00 0 00 0 00 0 00 GV RS00.00 00 00 0 0 0 00 00 0 0 00 00 0 0 GV RE0.00 0 0 0 0 0 0 0 0 () As % of lcu 00 00 00 00 00 00 0 0 0 0 0 0 0 0 0 0 0 0 0 00 00 00 00 00 00 00 00 0 0 0 00 0 00 0 0 0 0 00 00 00 00 00 00 0 0 GV RS0.00 0 GV RE0.0 0 GV RS0.0 0 pae 0/ pae / pae / 0-EN_Ver.
Thermal-manetic circuit-breakers GV RT GV RT For motors with hih peak on startin Control by rocker lever 0/ 0 V 00/ V 0 V 00 V 0 V () Id ± 0 % kw kw kw kw kw A A k 0.0 0.0 0.0 0. 0.0 GV RT0 0.0 0. 0. 0. 0. 0. 0.0 0. GV RT0 0.0 0.0 0. 0. 0. 0. 0. 0. 0. GV RT0 0.0 0. 0. 0. 0. 0.. 0... GV RT0 0.0.... GV RT0 0.0.......... GV RT0 0.0. GV RT0 0.0..... 0 00 GV RT 0.0....... 0 GV RT 0.0 00 GV RT0 0.0.. 00 GV RT 0.0 () The thermal trip settin must be within the marked on the raduated knob. 0 paes 0/ to / pae / pae / 0-EN_Ver.
(continued) Thermal-manetic circuit-breakers GV RT For primaries of -phase transformers Control by rocker lever Standard power ratins of thermal () Id ± 0 % 0/0 V 00/ V 0 V 00 V 0 V kw kw kw kw kw A A k 0. 0.0 GV RT0 0.0 GV RT 0.0 0. GV RT0 0.0 0. 0. 0. GV RT0 0.0 0. 0.. GV RT0 0.0 0..... GV RT0 0.0..... GV RT0 0.0........ 0.. 0 0 0.. GV RT0 0.0 0 00 GV RT 0.0 0 GV RT 0.0 0 00 GV RT0 0.0 Accessory () Description k Padlockable external operator (IP ) black handle, blue leend plate GV AP0 0.0 () The thermal trip settin must be within the marked on the raduated knob. () Other accessories such as mountin, cablin and markin accessories are identical to those used for GV ME motor circuit-breakers, see pae /. 0 paes 0/ to / pae / pae / 0-EN_Ver.