0W 0W 0W 0W Usage Port OFF OFF OFF OFF In-use ACT LRP-0CET Industrial -Port Coax/ Long Reach + -Port 0/00TX Extender Key Features Physical Ports LRP interfaces BNC female, Long Reach over Coaxial PD RJ5 connector, Long Reach over PD Copper interfaces 0/00BASE-TX RJ5 ports with IEEE 80.at Plus PSE and Ethernet data transmission over coaxial up to PLANET Long Reach solution is designed to extend IP Ethernet transmission and inject power simultaneously into a remote 80.af/at compliant powered device (PD) beyond the 00 meters distance limit of Ethernet. Perfect -to- over Coaxial/ Extender in Harsh Environment The LRP-0CET, a PLANET Long Reach solution, is an industrial-grade Single-port Long Reach to -port 80.af/at Extender delivered in an IP0 rugged strong case. It features long-range data and power transmission over any existing coaxial,, twisted-pair cable or telephone wires for distance up to,000m and converts power to standard 80.af/at over another 00-meter Ethernet cable connected to four remote PDs at the same time. The LRP-0CET provides one to multi applications for configurefree operation and deployment in climatically demanding environments with wide temperature range from -0 to 70 degrees C. It makes the installation of remote powered devices easier and more efficiently. km and Ethernet data transmission over up to 500m Supports Long Reach power up to 5 watts (depending on LRP Injector/Switch and cable distance) over Ethernet Complies with IEEE 80.at over Ethernet Plus/ end-span PSE Supports power budget up to 0 watts (external power input) Supports power up to 0 watts for each port (external power input) Auto detects remote PD Industrial Design IP0 aluminum case DIN rail and wall-mount design -0 to 70 degrees C operating temperature ~8V, redundant power with polarity reverse protect function Remote LRP over 0-0V AC LRP-0CET Long Reach Extender AC-to- Adapter 60W~50W/8~56V IN Ethernet Switch Cat5e/6 LRP-0UH Long Reach Injector over Long Reach Extender 80.af/80.at LRP-0CET IP Camera Budget 60 watts~0 watts (max.) Data Sheet
LRP-0CET IP Ethernet and over Long Distance The LRP-0CET provides a Long Reach solution for adding ports without running more cabling and achieves more flexible network applications without requiring an external power adapter. A normal cable can only be extended up to 00 meters, but with the LRP-0CET, the distance for networking can be extended up to,000 meters (,80ft.) when functioning with PLANET LRP injector or LRP switch over 75 ohm coaxial cable or up to 500 meters (,60ft.) over twisted-pair cable, without affecting the quality of video transmission. Thus, it eliminates the need for an additional electrical outlet as its single power source can provide power to a PD at long range via the LRP-0CET. IP Cam LRP-0CET Control Center LRP-0CH Injector Data Coaxial Cable Up to 000m Two Types of Input: Remote LRP through BNC/RJ5 and Local In the Long Reach mode, the LRP-0CET s budget depends on the output of the Long Reach Poe Injector or Long Reach Switch, but with External input, it is possible to increase the budget up to 0W. It means the four IEEE 80.at PDs (powered device) can be powered by the LRP- 0CET. It also features a strong dual power input system (Dual V~8V ) incorporated into customer s automation network to enhance system reliability and uptime. LRP-0CET Wireless AP Coax. IP Camera VoIP Coax. Line () Coaxial Cable 00BASE-TX with
0W 0W 0W 0W Usage Port OFF OFF OFF OFF 0W 0W 0W 0W Usage Port OFF OFF OFF OFF In-use ACT LRP-0CET Configure-free Installation The LRP-0CET can be used immediately without the need of configuration and is also compliant with all kinds of IP network protocols. Moreover, the rich diagnostic LEDs and Usage LEDs on the front panel show the operating status of the individual port and the whole system. The DIP switch can control output of each port by turning or OFF, enabling the administrator to efficiently manage the network. Stable Operating Performance under Difficult Environments PLANET Long Reach Extender is the perfect solution for extended data and power transmission for warehouses, parking lots, campuses, casinos, and many more. It can operate stably under temperature range from -0 to 70 degrees C which enables the users to conveniently apply the device in any harsh environment. Without the problem of power source, it makes the installation of remote powered devices easier and more efficiently. Applications One Sourcing for Multi ed Devices Solution PLANET Long Reach solution is designed to extend IP Ethernet transmission and inject power simultaneously into a remote 80.af/at compliant powered device (PD) beyond the 00 meters distance limit of Ethernet. The solution works in pairs for point to point and point to multi-point connectivities. Point to Multi Points Type : Remote LRP through BNC/RJ5 with 56V input The LRP-0 Injector, powered by IEEE 80.at/af or power adapter, transmits data and power over coaxial/ cable to the LRP-0CET extender. An IEEE 80.at/af compliant PD will then automatically be powered by the LRP-0CET via cabling. Remote LRP LRP-0CET Long Reach Extender 80.af / 80.at Switch Cat5e/6 LRP-0CH Long Reach Injector over Coaxial Long Reach Extender 80.af/80.at In-use ACT LRP-0CET Budget 0 watts (max.) IP Camera Type : Local with External Input ( V~8V) The LRP-0 Injector, powered by IEEE 80.at/af or power adapter, transmits data through coaxial/ cable to the LRP-0CET extender powered by external power. An IEEE 80.at/af compliant PD will then automatically be powered by the LRP-0CET via cabling. Local LRP-0CET Long Reach Extender 0W/-8V Supply 80.af / 80.at Switch Cat5e/6 LRP-0CH Long Reach Injector Long Reach Extender 80.af/80.at LRP-0CET IP Camera Budget 0 watts (max.)
0W 0W 0W 0W Usage Port OFF OFF OFF OFF 0W 0W 0W 0W Usage Port OFF OFF OFF OFF 0W 0W 0W 0W Usage Port OFF OFF OFF OFF 0W 0W 0W 0W Usage Port OFF OFF OFF OFF LRP-0CET Multi Points to Multi Points: Type : Remote LRP through BNC with 56V input The LRP Switch, powered by itself, transmits data and power over coaxial cable to the LRP-0CET extender. An IEEE 80.at/af compliant PD will then automatically be powered by the LRP-0CET via cabling. Remote LRP LRP-8CS over Coaxial LRP-0CET Long Reach Extender 80.at + IP Camera Up to 00m Long Reach Extender ACT In-use LRP-0CET Budget 0 watts (max.) 0-0V AC Up to 00m Long Reach Extender ACT In-use LRP-0CET Type : Local with External input ( V~8V) ed by external power, the LRP Switch transmits data through coaxial cable to the LRP-0CET extender. An IEEE 80.at/af compliant PD will then automatically be powered by the LRP-0CET via cabling. Local LRP-8CS over Coaxial LRP-0CET Long Reach Extender 80.at + IP Camera Coaxial 0W/-8V Supply Up to 00m Long Reach Extender ACT In-use LRP-0CET Budget 0 watts (max.) 0-0V AC Coaxial 0W/-8V Supply Up to 00m Long Reach Extender ACT In-use LRP-0CET Budget 0 watts (max.)
LRP-0CET Specifications Model Hardware Specifications Ethernet Interface SRAM Packet Buffer Jumbo Packet Size LRP-0CET Copper Ports Injector Ports Functionality Standards Compliance Type output Cabling Maximum Distance Maximum Frame size Connectivity Input Pin Assignment Cabling Four 0/00BASE-TX RJ5 auto-mdi/mdi-x Four ports with 80.at/af injector function with Port- to Port- Four DIP switches to control output on or off with Port- to Port- IEEE 80.at over Ethernet Plus/PSE End-span 5V, output depends on LRP Injector or LRP Switch 5V, 5 watts per port (external input) Ethernet: 0BASE-T: -pair Cat., and 5 Ethernet: 00BASE-TX: -pair Cat.5, 5e and 6 00m 5 bytes One BNC female Long Reach over Coaxial PD ~ 56V BNC center pole: + BNC shield: - Coaxial cable: 75 ohm RG-6/U cable, less thanω/000 ft. RG-59/U cable, less than 0Ω/000 ft. One RJ5 connector Long Reach over PD RJ5 Pins,, 5, 7: VCC+ RJ5 Pins,, 6, 8: VCC- Cat.,, 5, 5e cable (00 meters, max.) EIA/TIA-568 00-ohm STP (00 meters, max.) Long Reach Interface LED Indicator Installation Dimensions (W x D x H) Weight Requirements Consumption/ Dissipation Alarm Enclosure Standards Conformance Standards Compliance Regulatory Compliance Stability Testing Maximum Distance Long Reach Ethernet Stan dard IEEE 90 Modulation Type Security Frequency Band Encryption LRP Compatibility x LED for External Supply: Max. 00m with + output (656ft.) Max. 00m with output (,ft.) Max. 000m without output (,80ft.) Wavelet-OFDM 8-bit AES encryption ~ 8 MHz AES 8-bit With power over coaxial input: LRP-0CH -Port LRP Injector LRP-8CS 8-Port LRP over Coax Switch LRP-6CS 6-Port LRP over Coax Switch Green: Green: Red: Fault x LED for Usage: Green: 0W/0W/0W/0W x LED for Long Reach In: x LED for each RJ5 interface (Port- and Port-) DIN rail kit and wall-mount kit 5 x 87.8 x 56 mm 6g ~56V power over coaxial input Green: Green: Green: 0/00Mbps /ACT Orange: -in-use ~8V, redundant power with polarity reverses protection function 0 watts/6btu (Ethernet with Full Loading) One relay output for power failure. Alarm relay current carry ability: A @ V Aluminum case IEEE 80. Ethernet/0BASE-T IEEE 80.u Fast Ethernet/00BASE-TX IEEE 80.x Full-Duplex Flow Control IEEE 80.at over Ethernet Plus FCC Part 5 Class A, CE IEC60068-- (free fall) IEC60068--7 (anti-shock) IEC60068--6 (anti-vibration) Max. 00m with + output (8ft.) Max. 00m with output (,ft.) With power over input: LRP-0UH -Port LRP Injector 5
LRP-0CET Environment Temperature Humidity Performance Weight Performance Operating: -0~70 degrees C Storage: -5~75 degrees C Operating: 5~95% (non-condensing) Storage: 5~95% (non-condensing) Distance Data Rate(Upload/ Download) Remote LRP through BNC W/56V IN 80.af/at Total Output Capability Remote LRP by LRP-8CS/LRP- 6CS Local through Terminal Block 00m 88/88 Mbps.5W 8W/9W 0W 00m 85/86 Mbps 0W W/6W 0W 600m 66/67 Mbps 9W 0W/W 0W 800m 8/57 Mbps W 7W/8W 0W 000m /57 Mbps 5W 0W Distance Data Rate(Upload/ Download) Remote LRP through RJ5 W/56V IN 80.af/at Total Output Capability Local through Terminal Block 00m 80/85Mbps.W 0W 00m 6/75Mbps W 0W 00m /60Mbps 0W 0W 00m 5/0Mbps W 0W *As there are various resistance values in the category of RG-59/U or RG-6/U cable, the actual data rate will vary on the quality of the copper wire and environmental factors. **Depending on what the / power input and the length of coaxial cable are. Diagram Top View + + Fault Input -8V Front View Side View Side View Rear View 0W 0W 0W 0W Usage Port OFF OFF OFF OFF Mounting Kit Long Reach Extender DIN-Rail Kit ACT In-use LRP-0CET Mounting Kit Dimensions ( unit = mm ) 6
LRP-0CET Ordering Information LRP-0CET Industrial -Port Coax/ Long Reach + -Port 0/00TX Extender Art. No. 5 Related Products LRP-0C-KIT LRP-0U-KIT LRP-8CS LRP-6CS ICA-M0P -Port Long Reach over Coax Extender Kit (LRP-0CH + LRP-0CE) -Port Long Reach over Extender Kit (LRP-0UH + LRP-0UE) 8-Port Long Reach + -Port 0/00/000T + -Port 00/000X SFP Managed Switch 6-Port Coax + -Port 0/00/000T + -Port 00/000X SFP Long Reach over Coaxial Managed Switch H.65 Mega-pixel IR IP Camera with Remote Focus and Zoom