HP LF Printing Knwledge Center Prf a press with Pantne Clrs Applicatin: Adbe Phtshp CS Printer: HP Designjet 30/90/130 series Sftware: EFI Designjer Editn fr HP Operating System: Windws
1. First recmmendatins: Sme paper types are better than thers fr prfing, see the Media type functinality & features and chse the mst apprpriate media. It is essential t have the media type crrectly calibrated with the printer and print mde, cnsult the Calibrate my printer dcument. 2. Open the EFI Designer Editin RIP. 3. EFI Designer Editin RIP settings, Preferences: Clr: Check the Active Clr Management checkbx. Paper name: Select the paper type that is laded n the printer (always calibrated) and Best print quality. Print reslutin: 600 x 600. Clr utput mde: Pht print. Yu dn t need t wrry abut the prfiles and rendering intent because yu will select Printer Clr Management ptin in the applicatin, then, the applicatin tells the RIP which surce prfile and rendering intent shuld be used fr the cnversin t the print space, these are the Dcument prfile and the Print Space Intent f the applicatin. The RIP clr settings will be verridden. OK 4. Open Adbe Phtshp CS. 5. Cnfigure the Clr Settings, Edit menu > Clr Settings : Make sure that the Advance Mde check bx is ticked. 2
Wrking Space > RGB: srgb IEC61966-2.1. Cnversin Optins > Intent: Abslute Clrimetric. 6. Create a new file in an RGB clr mde, File menu -> New...: Width, Height and Reslutin: select the image size and reslutin yu need. Mde: RGB Clr 7. Select yur Pantne Clr and draw/paint yur image: Duble-click n the clr bx f the Tls windw t pen the Clr Picker: 3
Select Custm and pen the Pantne Slid Cated bk, nw yu can select the desired Pantne clr. Click OK. Nw yu can paint/draw. 8. Adbe Phtshp Print with Preview settings, File menu > Print with Preview : Page Setup: Printer...: Select the printer (ex. EFI Designer Editin). Click OK. Paper Size: Select the paper size f the media laded n the printer. Orientatin: Select the rientatin f yur image n the paper. Click OK. Set the Psitin and the Scaled Print Size yu need. Check Shw Mre Optins. Select the Clr Management tab: 4
Surce Space: Dcument. Print Space > Prfile: Printer Clr Management. Print Space > Intent: Abslute Clrimetric. 9. Print, Print > Prperties > Advanced : Dcument Optins > Printer Features: Paper Size: Setup Select RIP s Default n the thers settings. 5
Click OK, until print. 6
Fr mre infrmatin n HP Designjet prducts www.hp.cm/g/designjet 2005 Hewlett-Packard Develpment Cmpany, L.P. The infrmatin cntained herein is subject t change withut ntice. The nly warranties fr HP prducts and services are set frth in the express warranty statements accmpanying such prducts and services. Nthing herein shuld be cnstrued as cnstituting an additinal warranty. HP shall nt be liable fr technical r editrial errrs r missins cntained herein. Adbe Phtshp and PstScript are trademarks f Adbe Systems Incrprated. PANTONE is Pantne, Inc.'s check-standard trademark fr clr. Rev. 1.3, 02/2005 7