New Products Multi-Stream Multi-CODEC Encoder EN-100 The EN-100 is Adtec s 6 th generation compression platform. This innovative multi-stream multi-codec low delay platform boasts AVC 4:2:2 10 bit, 8 bit, and 4:2:0 plus MPEG 2 4:2:2 and 4:2:0. Concurrent MPEG 4 AVC/H.264 and MPEG 2 encoding enables the delivery of multiple CODEC SD or HD video for use in different receiving environments. Adtec s leading industry interoperability, usability, and units in service are unique. The EN-100 is the encore to the widely deployed and very popular EN-81 and represents the new global benchmark for multi-codec DSNG, Tier-One Contribution and now Tier-One Distribution platforms. The lightweight and nearly silent EN-100 offers amazing features and specifications in its 1 RU chassis, including redundant AC power supplies, enhanced control and monitoring via its front-panel, a browser and SNMP; video support includes SD, 2D-HD, 3D and 4K (Ultra HD)synchronous AVC encoding with legacy support for MPEG 2. The EN-100boasts sixteen channels of phase-aligned audio, robust VBI support, reliability and ease of use. In addition to encoding phase-aligned MPEG 1 audio, the EN-100 adds support for Dolby Digital Plus, ACC-LC and HE-AAC (v1 and v2) mixed mode audio encoding supporting stereo (2.0) and multi-channel surround (5.1) modes. Over the top (OTT) video delivery is a growing segment. Future firmware releases for the EN-100 will enable direct adaptive-stream delivery to a CDN via RTMP. One uncompressed frame size and rate in with up to four concurrent resolutions and bit rates coded for direct delivery to phones, pads, pcs, set tops and televisions. The EN-100 encodes and concurrently transports services via ASI, IP and DVBS/S2. The DVB-S/S2modulator is available in IF or L-band with modulation modes ranging from QPSK up to 32APSK 5%, 10% or 15% rolloff based on software licenses. Key Features 1080P 50 and 1080P 59.94 fps encoding (3G)* AVC 4:2:2 10-bit Video Encoding* MPEG 2 1080i 4:2:2 Video Encoding* 3G Copper and Fiber SFP Video Interfaces, 3G-SDI 1 to 3 Frame 1080P, 1080i, 720P or D1 End-to-end latency* Automatic SD, HD or 3G (Level A or Level B) detection Sixteen (16) channels of audio encoding* MPEG 1 Layer 2*, AAC* and Dolby Digital Plus* stereo and 5.1 Audio Encoding Dolby E and PCM pass-through Time Code, Captions, Teletext and other VBI support Redundant Power Supplies Multiple Concurrent IP streams w/ FEC RTMP for OTT applications Simultaneous ASI, IP, and DVB-S/S2transport Optional DVB-S/S2modulation supporting QPSK to 32APSK with 5%, 10%, or 15% rolloff* ASI Transport Interface to 110 Mbs IP Transport Interface (IP supports UDP/RTP and SMPTE 2022 FEC) TCP/IP transport Adaptive Bit Rate encoding* Web UI Front Panel UI SNMP Control and Monitoring Remote UI Video and Audio Thumbnail (preview of decode via IP Network) Robust, quiet, lightweight design *Optional licenses required Applications DSNG (ultra-low, low and normal delay) Tier One Contribution on dedicated ASI or IP circuits 3D and 4K (Ultra HD) Discrete Contribution Adaptive IP Contribution using Adtec RD-60 / RD-70 IRD High Efficiency Trunking (JPEG replacement) Teleport Infrastructure for Ad hock Occasional Use in Field and Studio Encoding ISDB-Tb, DVB-T/T2, ATSC Distribution Over the Top (OTT)
Product Specifications EN-100 Multi-Channel Multi-CODEC Encoder Encoder SDI Video Input SD/HD/3G BNC x1 Small Form factor Pluggable (SFP) Optical Fiber jack 3G-SDI Level A& B auto-detection Digital SD/HDSDI with very rapid auto resolution and frame rate detection BNC x 1, SFP x1 3G 75 Ohm BNC connector (x1) with AUTO mode for SD, HD or 3G SDI. SD-SDI (SMPTE 259M - 270 Mbit/s) with embedded audio per SMPTE 272M HD-SDI (SMPTE 272M - 1.485 Gbit/s) with embedded audio per SMPTE 299M 3G-SDI (SMPTE 424M - 2.97 Gbit/s) with embedded audio per SMPTE 299M SFP (SMPTE 297-2006) ASI Input Rate to 210 Mbps (Same connector as HD SDI for use with embedded DVB-S/S2modulation option) Analog Video Input Analog NTSC or PAL (SMPTE 170M, ITU-R 624-4).75 Ohm. Audio Inputs Balanced Stereo (XLR x 4), AES-2 (BNCx8 and SDI Embedded (16 channels) Audio AES-EBU Digital audio input (x8 pairs or x16channels) for uncompressed LPCM or compressed bit stream processing 4 x BNC (75 Ohm) SDI- Embedded Digital audio input (x8 pairs or x16 channels**) for uncompressed LPCM or compressed bit stream processing Digital audio embedded per SMPTE 272M (SD) and SMPTE 299M (HD) SFP module or BNC (75 Ohm) Analog Audio Analog Balanced Stereo input (x2). Analog audio input via DB15 male connector. Clip level 18dB. DB15 (10 Ohm) Audio MPEG 1 Layer 2 audio (8 pairs) or 16 channels** 48 Khz. Bit rates include 32, 48, 56, 64, 80, 96, 112, 128, 160, 192, 224, 256, 320, 384 Kbit/s. Stereo, Mono, Dual Mono. Supported Audio CODEC (Encoded, not pass through) Dolby Digital 2.0 (AC3)* Dolby Digital 5.1 (AC3)* Dolby Digital+ 2.0, 5.1* MPEG1 Layer 2 encode ** AAC LC * AAC HEv1, HEv2 * * Optional licensing and keys required ** No licensing, keys only Audio Passthrough 4 x Dolby E 5.1/2.0/1.0, AC-3, LPCM, Linear Acoustic HD/SD Encode SD Encode Standard Definition D1 NTSC 59.94 fps and PAL 25 fps video SD Video encode profile and levels MPEG 2 - MP@ML Data rates from 1 to 15 Mbps *** MPEG 2-422P@ML Data rates from 1 to 80 Mbps *** H.264 (MPEG 4): MP@L3.0, MP@L3.1, MP@L3.2Data rates from 0.700-20 Mbps (Support for 420 and 422 for both CODECs based on 420/422 Feature Key) HD Encode 1080P 59.94*, 1080i 59.94, 720P 59.94, 1080P 50*, 1080i 50, 720P 50 fps 1080p 23.98/24 8 and 10 bit support*** SD/HD Video encode profile and levels MPEG 2 - MP@ML& 422P@ML Data rates from 1 to 80 Mbps *** MPEG 2 - MP@HL&422P@HL Data rates from 6 to 80 Mbps *** H.264 (MPEG 4): MP@L3.0, MP@L3.1,MP@L3.2 Data rates from.700 to 20 Mbps H.264 (MPEG 4): MP@L4.0,MP@L4.1Data rates from 3 to 80 Mbps (Support for 420 and 422 for both CODECs based on 420/422 Feature Key) * VE1 Hardware required for P50/59.94 video processing *** VE2 Hardware required for Mp2 and 10bit video processing Encode Latency* The EN-100 supports 4 interoperability latency modes. Long (~ 1 second) Distribution Applications, Normal (~ 400 ms) Contribution Applications, Low (~ 250 ms) Low Latency Contribution, Very Low (~120 ms) Low Latency Contribution. Ultra Low 3 Frame Latency* 3 Frame end to end with 16 channel audio encode. Includes full
Product Specifications encode to decode path. Ultra Low 1 and 2 Frame Latency* 1 and 2 Frame end to end with 4 LPCM or Dolby E pass-through. Includes full encode to decode path. ASI Transport Output ISO13818-1 MPEG 2 Transport Stream per EN 50083-9:1997 (188 byte only). Rate to 110 Mbps IP Transport Output (TSoIP) RJ45 x 1 ISO13818-1 MPEG 2 Transport Stream encapsulated per EN 301 192. Supports four (4) unique UDP or RTP encapsulated routes with SMPTE 2022 (COP3 FEC). TSoIP (ETH0 and ETH1 {GigE}) concurrent with ASI and DVBS/S2. Additionally, TCP transport for increased reliability in IP delivery. DVB-S/S2Transport Output BNC x 2 IF F-Type x 2 L-Band ISO13818-1 MPEG 2 Transport Stream per EN 50083-9:1997 (188 byte only). DVB-S/S2RF Modulation option. Intermediate Frequency (IF) between 50-180 Mhz or L-Band between 950-2150 Mhz (2150 Option). RF or IF based on model Main and Monitor outputs with user selectable power level.,, DVB-DSNG compliant JG per EN- 301210. IF and L-Band outputs are 50 Ohm. Advanced Modulation* 16APSK and 32APSK with 5, 10, 15, 20, 25, 35 percent roll off (Clean Channel Technology) Encryption BISS 1 and E modes standard. No optional hardware required. Flashing SMPTE Bars with DVB Service Name and Service Provider OSD Selectable resolutions from NTSC, PAL, 720P 59.94/50,1080i 59.94/50 (1080P 59.94/50 on EN-91P). User definable video fail mode, Black, Color or Bars. Valid video signal is not required to generate video signal. Audio Signal Generation Audio Tones user selectable frequency per pair from 440 Hz to 2.5Khz. Group L/R mute or Pair L/R mute. No audio inputs are required to generate audio tones. ios Multiviewer Control multiple encoders and decoders with video and audio thumbnail. Compatible with ipad and iphone Android and Windows mobile coming soon Physical 1 RU chassis (19 x 18 x 1.75 / 482 x 44 x 457 mm ) - 9 pounds (~4 Kg). Power Input Redundant auto switching dual 70-240 VAC 50/60 Hz Power Usage Start-up: 35 Watts - Operational: 12-20 Watts depending on encoder configuration Cooling and Loudness Dynamically controlled low noise fan system with left to right airflow. Very quiet operation at less than 60 dba. Operating temp of 0 to 50 degrees C, non-condensing Alarms Front Panel LED, Web UI, SNMP, GPIO Video Signal Generation IF Modulator ( option ) Baudrate range: 0.06-45/68 Mbaud Output level: -30 to +5dBm (+/- 2dB) Frequency: 50 to 180MHz **MAIN BNC: IF Frequency (50-180MHz), MONITOR BNC: Fixed L-Band 1080MHz -45dBm
Digital Video Glossary of Terms L-Band Modulator ( option ) Baud rate range: 0.06-45/68 Mbaud Output level: -35 to +5dBm (+/- 2dB) Frequency: 950 to 2150MHz **MAIN BNC: L-Band Frequency (950-2150MHz), MONITOR BNC: Fixed Power Level -45dBm L-Band Modulator + 10MHz ( option ) Baudrate range: 0.06-45/68 Mbaud Output level: -35 to +5dBm (+/- 2dB) Frequency: 950 to 2150MHz 10MHz Option: Adds option to add 10MHz onto L-Band output **MAIN BNC: L-Band Frequency (950-2150MHz), MONITOR BNC: Fixed Power Level -45dBm
Digital Video Glossary of Terms