1 Introduction Introduction: The push button sensor 3 is the operating unit on site in the wall, which makes it the operating unit which is always available to the user. It can be assigned different variants and various functions such as switching, dimming, blinds and scene control. The Plus variant additionally offers the option of room temperature control Process In the following learning unit, you will learn about Page 1 of 14 02.2013
- the setup, variants and functions of the push button sensor 3. - the design variants of the cover plates for the push button sensor 3 - using the inscription service. 02.2013 Page 2 of 14
2 Design of the push button sensor 3 Push button sensor 3 Start-up cover plate Design cover plate Inscription label Push button sensor 3 3-gang Bus coupler 3 Fixing screw <-- Programming button The programming button is on the push button sensor The push button sensor is delivered with a start-up rocker which is later replaced by the individual Page 3 of 14 02.2013
design cover plate. Move the cursor over the images for more information. Bus coupler 3 02.2013 Page 4 of 14
Connection for external sensors The bus coupler 3 does not have a programming button (Order No. 2008 00). Another variant is the bus coupler 3 with external temperature sensor (Order No. 2009). The external sensor can only be used with the push button sensor top unit 3 Plus. Move the cursor over the images for more information. Page 5 of 14 02.2013
3 Variants and functions Variants of the push button sensor 3 Hardware variants: Push button sensor 3 Basic Push button sensor 3 Comfort Push button sensor 3 Plus Available in the ranges: F100, E22 and System 55 02.2013 Page 6 of 14
Push button sensor 3 Basic Push button sensor 3 Basic: - Functions can be selected for each rocker - LED colour red for System 55 - LED colour blue for F100 Push button sensor 3 Comfort Page 7 of 14 02.2013
Push button sensor 3 Comfort: - Functions can be selected for each push button - Evaluation when the push button is pressed and held - Blind single-key operation - The colour of each push button is adjustable (red, green and blue) - LED brightness can be selected from 5 levels for day and night operation - Higher-level status function, e.g. for displaying the block function, wind alarm - LED flash - Temperature sensor Push button sensor 3 Plus Push button sensor 3 Plus: - Room temperature controller - Optional floor sensor via bus coupler 3 with sensor input - Dot matrix display - Text display from object (14 byte) - Fan coil mode in connection with the fan coil actuator - Setpoint offset - Absolute setpoint (setpoint value of the active operating mode) 02.2013 Page 8 of 14
- Operation optimisation via the visualisation Push button sensor 3 Plus display Push button sensor 3 Plus display: - Free texts about the group address can be shown - Various displays for temperatures, time or fan speeds - Clear user guidance Page 9 of 14 02.2013
4 Design variants Design diversity Design F100 02.2013 Page 10 of 14
Design cover plate System 55 rocker sets (lacquered) Pure white Cream white Anthracite Aluminium Design cover plate E22 rocker sets Aluminium / Stainless Steel with inscription space Real material Design cover plate E22 rocker sets Aluminium / Stainless Steel Page 11 of 14 02.2013
Real material inscribed ClassiX rocker sets brass / bronze Real material Real material inscribed 02.2013 Page 12 of 14
5 Inscription service Inscription service In just four steps, you can create an inscription for your Gira product and send us your design concept. 1. Select your product. 2. Enter the desired text and specify how it will appear. 3. Preview your design concept in the PDF format. 4. Order the inscription you have designed. http://marking.gira.com/en/ Page 13 of 14 02.2013
6 End learning unit End You have successfully become familiar with the functions and design variants of the push button sensor 3 and Gira Inscription Service. 02.2013 Page 14 of 14