Other.1 Initializing your voice mailbox. Modify the password for your phone set Light flashes Enter your personal code, then record your name following the voice guide instructions Settings Set Password Your personal code is used to access your voice mailbox and to lock your telephone.. Customizing your voice greeting old code (4 digits) new code (4 digits) You can replace the greeting message by a personal message. No new voice message personal code Perso options Greeting msg Perso greeting enter new password again to confirm Normal prompt Perso greeting End This code acts as a password controlling access to programming functions and the user ' Set Locking ' feature (code by ault: 0000). press to return to the ault message record message end recording.4 Modify the password for your voice mailbox Accept Restart Replay No new voice message Perso options Admin options confirm re-record a message replay message personal code Password My password # new code (4 digits) As long as your voice mailbox has not been initialized, the personal code is 11. 4
Activate/deactivate discreet ring mode:. Adjusting the audio features One beep Three beeps One beep Three beeps Settings Set Ringing to activate to deactivate Choose the tune: Internal call External call select the type of call to which the ringing is to be associated Priority Call Adjust ringer volume while a call arrives: Paul is calling your telephone rings. Adjusting screen brightness (Alcatel-Lucent IP Touch 408 & 409 Digital Phone) adjusting the ringer volume: select the melody of your choice (1 tunes) Adjusting the ringer volume: Settings Set Contrast Ringing level Activate/deactivate silent mode: select the level of your choice: (1 levels) increase or decrease the contrast. Selecting the welcome This feature is used to choose the displayed by ault on the telephone. More options Silent mode Silent mode Settings Set Home to activate to deactivate Activate/disable meeting mode (progressive ringing): More options Progressive ringing to activate Progressive ringing to deactivate select the ault
.8 Selecting language.10 Erase a programmed key Settings Set Language Settings Set Key program Main Erase enter your personal code select the language of your choice access the 'perso' if necessary select the key to erase.9 Program the keys for the Main or the add-on module pers. Main.11 Programming an appointment reminder You can program call numbers and features for the 'Main' keys and the add-on module keys. You can ine the time of a temporary reminder (one in 4 hours) or a permanent reminder (every day at the same time). 10:0 PERS. Main Speed dial My services Appointment access the Main using the navigator press the key you want to program to program a number to program a feature enter time of appointment To program a number: Speed dial To program a feature: enter the number enter the name confirm dial the number of the appointment destination set The 'Appointment programmed' icon is displayed on the welcome. At the programmed time, your telephone rings: My services follow informations displayed on the screen Other possibilities: If your calls are forwarded to another terminal, the forwarding is not applied to the reminder call. Modify Erase modify contents of entry displayed delete
To cancel your reminder request: Appointment Erase.1 Call the associated set The 'Appointment programmed' icon disappears from the welcome. The number of another set can be associated with your set number (see Modify the associated number). To call it: Settings My services Consultation.1 Identifying the terminal you are on The number of your telephone is displayed on the 'Info'. Associate servic Call associate Access the Info using the navigator. start the call.1 Lock / unlock your telephone.1 Forward your calls to the associated number If you have previously ined an associated number, you can forward your calls to this number. Lock your telephone is locked/unlocked Settings My services Consultation Associate servic depending the displayed informations, enter your password or confirm.14 Configuring the audio jack of your telephone By ault, the audio jack of your telephone can be used to connect a headset, handsfree kit or loudspeaker. Overflow to associate for forwarding when you do not answer Overflow if bus to associate for immediate forwarding when your line is busy Settings Set Plug jack Ovflow busy/no to assoc Deact overflow to associate for forwarding if you do not answer or if you are busy to cancel the forwarding to associate function Headset Hands-free Speaker
.1 Modify the associated number.0 Installing a Bluetooth Wireless Technology handset (matching) - Alcatel-Lucent IP Touch 408 Phone The associated number can be a phone set number, the voice mail number or the r number. Before a Bluetooth headset can be used, it must be correctly matched to the terminal. My parameters My services associated My parameters Set BlueTooth Modify acceptance of the programming is displayed Add device you will hear a note signal and the LED will flash green and orange alternately Enter your personal code enter the new associated number with the handset turned off, press the Bluetooth handset keys at the same time (long press).18 The Tandem configuration This configuration lets you group two sets under a single call number. Your set is then the main set and the second set, usually a DECT set, is the secondary set. Each set has its own directory number, but the tandem number is that of the main set. When you receive a call, the two sets ring simultaneously. When one of the sets answers, the other set stops ringing. When all the lines of the main set are busy, the secondary (DECT) set does not ring. The secondary set can still be called by its own number, but in this case, the tandem function will no longer be taken into account. Most of the functions are common to the two sets, for example: forwarding, meet-me reminder, the various messages, etc., while others are specific to each set, for example: individual directory, last number redial, out of service, set padlock, etc. For more information regarding this configuration, contact the person in charge of your installation..19 Create, modify or consult your intercom list (max. 10 numbers) searching for Bluetooth equipment, wait until the detected equipment type and the address is displayed select the relevant equipment the note audible signal indicates that the handset has been installed correctly (the LED flashes green or orange depending on the battery charge level) Add.1 Use of the Bluetooth handset (Alcatel-Lucent IP Touch 408 Phone) Settings My services The Bluetooth cordless handset permits the user to answer and call with complete freedom within a radius of 10 meter from the set. IP Touch Bluetooth Wireless handset The handset has a LED and two buttons. Interphone follow instructions given on display Green flashing: normal operation. Green steady: handset charging. Orange flashing: battery charge low or handset outside coverage zone. Orange steady: malfunction. 8
Off-hook/On-hook and Volume/Mute keys: Off-hook/On-hook: press this key to take or terminate a call..4 Deleting an accessory (headset, handset, etc.): Bluetooth Wireless Technology Volume/Mute: short successive presses to change the handset volume level ( levels) long press to ensure your party no longer hears you My parameters Set BlueTooth. Installing a Bluetooth Wireless Technology headset (matching) - Alcatel-Lucent IP Touch 408 Phone My devices display of the different equipment matched Before a Bluetooth headset can be used, it must be correctly matched to the terminal. Before performing the matching operation, the headset must be in detectable mode*. select the equipment to be removed My parameters Set BlueTooth Remove device message acknowledging the equipment has been removed confirm your choice Add device searching for Bluetooth equipment, wait until the detected equipment type and the address is displayed Add select the relevant equipment acknowledgement message and display of the headset icon on the terminal screen confirm your choice enter the PIN code of the headset * * Refer to the user documentation supplied with the headset.. Using a Bluetooth Wireless Technology headset - Alcatel-Lucent IP Touch 408 Phone Refer to the user documentation supplied with the headset. 9