Multi-functional Portable HD LCD Monitor User Manual
Product description: Multi-functional portable HD LCD monitor is a new multi-function products, adopted advanced integrated circuits, high-quality new HD LCD panel and built-in high capacity battery. It is with HDMI VIDEO output and some special functions, which make it wide application, casing compact, simple operation, and portable convenient. The monitor can be applied to FPV ground station, Security monitoring, baby monitors, photography viewfinder, live interview, construction site video surveillance. Advertising and other terminal display application field. To insure best use of the unit, please read the user s manual carefully. CAUTION 1. Do not use any damaged or leaking battery and please replace the battery immediately if its working life becomes short significantly 2. Do not expose this product to direct sunlight, heat or humid conditions 3. Keep away from strong light while using this product so as to obtain the clearest and the most colorful picture. Please use sun shade for the outdoor necessary 4. Please avoid heavy impact or drop on the ground. 5. Do not use chemical solutions to clean this unit. Please simply wipe with a clean soft cloth to keep the brightness of the surface. 6. Without adjustable component in the unit, please do not take apart or repair the unit by yourself, to avoid damage the product. 1
Product feature: High brightness, contrast, high resolution with sun shade, visible under the sunshine Built-in VIDEO/AUDIO input and output, HDMI input, enable for a various of signal Color Control Systems support, enter the menu to manually Select the appropriate format, and adaptable Built-in battery With VIDEO signal output function, can be used as video host, connecting multiple monitors. Shortcuts key can adjust the brightness and check field Picture Screen Markers and Center Marker 2
CONTENTS 1. Product description -------------------------------- 4 2. Operation instruction ------------------------------ 7 3. Video input and output cable -----------------11 4. Sun shade installation and remove ---------12 5. Power Supply----------------------------------------- 14 6. Parameters -------------------------------------------- 15 7. Trouble shooting ----------------------------------- 16 3
1. Product description (White and black color for optional, just the keyboard difference): 1.1 Front panel instruction: 1. : Multi button: Check Field In HDMI / VIDEO state: Shortcut key for check field In OSD menu state: UP for OSD Menu 4
2. : Multi button, brightness election In HDMI / VIDEO signal state: Press this button to adjust brightness In OSD menu state: Down for OSD menu 3. MENU: Menu button, as exit button when on BAND selection 4. : Volume up, press this key to increase the volume control, menu item selection for settings adjustment 5. : Volume down and center mark button, press this key for center mark on/off. If would like to make the volume down, press firstly and then press this button for adjustment. Menu item selection for settings adjustment 6. MODE: Signal selection. 7. : OFF/ON, it will be off/on after press this button for 3s 8. Charge indicator light, it s red when charging, it s green when Charge Complete 9. TFT screen 5
1.2 Rear panel instruction: 1. USB Upgrade 2. DC OUT: DC power output. Can power supply to other additional equipment. When the machine is composed of an external power supply, the output of the power supply voltage and the external power supply voltage is consistent. It is powered by built-in battery, the battery voltage of output supply will be same as the built-in battery voltage (Be shall not exceed 500mA when power output). 3. DC IN: External power input. This machine can be powered supply by external or internal. If the customer needs to use the other power adapter, please use the qualified power supply in DC9-18V, 1.2A. 4. Battery cover 5. : Stereo earphone jack 6. AV/OUT: AUDIO output port 7. AV/IN: AUDIO input port 8. HDMI IN: HDMI input port 6
2. Operating instructions: 2.1 Button instructions: Standby button MODE Input Signal selection button Menu item selection for settings adjustment Volume down and center mark button press this key for center mark on/off. If would like to make the volume down, press firstly and then press this button for adjustment. Menu item selection for settings adjustment MENU Menu key, as exit button when on BAND selection Multi button, different functions in different input status VIDEO Status No menu shows, change R/G/B/Mono/Color OSD Menu Operation In menu operation, change function menu and enter into submenu. Press Multi button, different functions in different input status; VIDEO Status No menu shows, press this button to change 6 brightness levels OSD Menu Operation In menu operation, change function menu and enter into sub-menu to next selection. 7
2.2 Menu instructions Press "MENU" to enter the menu, use the " " or " " button to select "Color/ MENU/ Function/ Volume", select it and press " " or " " button to confirm, enter the submenu Operation, use the " " or " "button select the adjustment item. After selected adjustment item, press the "MENU" once again to confirm, press "MENU" key to exit the OSD menu. Color Brightness: To adjust the image's brightness. Contrast: To adjust the brightest and darkest ratio of the image, please note the sense of picture when adjust, proportion too large or small, will make the picture lose the color of showy. Hue: On NTSC Video mode, the image color tint difference is adjustable by tint. Saturation: To adjust color concentration Check Field: Switch on/off Check Field (Red, Green, Blue, Monochromatic and Color) 8
OSD Language: Languages for OSD as below: English, 简体中文, François, Italia no, Deutsch Español, 日本語, 한국의, Pycc, Portuguesa H Position: To adjust the OSD position in horizontal V Position: To adjust the OSD position in vertical OSD Timeout: To adjust the clock Transparent: To adjust the level of transparent 9
Function Reset: Back to original setting System: To adjust color video format Display Ratio: To change the display ratio 16:9/4:3 Screen Markers: To adjust screen marker(off, 96%, 93%, 90%, 85%, 80%) Centre Markers: To set centre mark (cross mark) display Camera: Use the Canon 5 d II or similar camera, the monitor video has real-time images. NO black screen, NO delay, perfect without distortion. 10
Sound Volume: To adjust the volume Focus: As an auxiliary functions (in HDMI mode ) when used as the camera viewfinder Ver.1.1:Software version number 3. VIEDO input and output cable We use 3.5mm for selection plug for VIDEO input and output (see the picture as above). Use No.1 plug for the VEDIO input and output Yellow RCA: VEDIO input or output port 11
Red RCA: AUDIO R input or output port White RCA: AUDIO L input or output port 4. Sunshade installation and remove 4.1 Installation: Positive parallel alignment of the sun shade and monitor, the projection of the sunshade hanging claw at the monitor sunshade slot (see the monitor front view marked 17), pay attention to the position should be aligned around inserted balanced slide down. 1 2 Sunshade installation view 1 The sunshade s hanging claw and the monitor s sunshade slot should be aligned around inserted balanced to slide down. 2 By equilibrium of sliding down to match up the sun shade and monitor. 3 Please follow steps, otherwise will damage the cover, please do not press the L/R panel of the sun shade, if not, unable open the cover. 12
3 4.2 Remove: When you want to move the sunshade from the monitor, hands were clenched monitor and the sunshade, drag up shade cover from monitor, that separates the sunshade from the monitor. Remove sunshade view: 1 2 3 1In accordance with the instructions below steps, close the sun shade in sequence 13
2 Drag up sunshade balanced to separates the sunshade from the monitor. 3 Remove the sunshade 5. Power Supply 5.1There are two versions for power supply: External power supply Supply by city electricity with power adapter When the monitor connect the electricity by DC power adapter, red light is illuminated, means is charging, after fully charged, then switch to green light. To use power adapter supply, it can choose the power adapter(optional), which matches to the monitor. If the customer need to use the other power adapter, please use the qualified power supply in DC9-18V, 1.5A. Built-in Battery Power SupplyThis model is built-in Li-ion battery capacity: 7.4V-2200mA/h(2Hours),after fully-charged, it lasts to work 2 hours. 5.2 Power Output This machine can output the power by DC OUT port, When the machine is composed of an external power supply, the output of the power supply voltage and the external power supply voltage is consistent. If the monitor is powered by build-in battery, the battery voltage of output supply will be same as the built-in battery voltage. 14
5.3 Li-ion Battery The working temperature of Li-ion battery is -20~60, please don t use battery in the place with temperature too low or too high. The power of battery will be reduce if it is working in low temperature environment. Please don t use the battery in high temperature environment, may cause battery swell then fire. Please check the temperature of battery when it working in high temperature environment. Over- charge and over- discharge, it will cause permanent damage to the positive pole and negative pole of batteries. No need over discharge then rechargeable every time. Period of time to do a deep charge and discharge the battery under the protection circuit control to correct the consumption statistics, but it will not improve your battery's actual capacity Please be placed in a cool place to weaken the passivation speed of battery, if you don t use the battery for long time. Please charge power stored in the battery to prevent self-discharge of excessive lead to excessive discharge damage if you don t use the battery for long time. 6 Parameters Panel size Panel type Resolution Backlight Dot pitch TFT LCD 7.0inch TFT LCD 1024 600 RGB =1843200 Pixels LED 0.05(W) x 0.15 (H) 15
Display ratio 16:9 Brightness 500 cd/ m2 Contrast ratio 700:1 Response time Viewing angle Input signal Output signal Video color system 10ms 75 /75 (L/R) 70 /75 (U/D) Video/Audio /HDMI Video PAL-4.43 / NTSC-3.58 HDMI support format 480i /480p /576i /576p 720p /1080i /1080p (50/60Hz) Headphone output Input voltage Power consumption Unit size (mm) Unit weight Installation method Build-in battery Working temperature Storage temperature stereo 3.5mm DC:9~18V 13W 190(L)x134(W)x18(H)mm 440g(Including the Li battery) 1/4 inch bracket screw holes, can be easily connected to the hot shoe mount, tripod fixed installation Li-ion 7.4V/2200 ma/h -20~50-30~65 7. Trouble shooting 7.1 Only black and white or monochrome picture: 1 Please check saturation brightness & contrast adjustment. 16
Under VIDEO/HDMI status, press to change the brightness. 2 Please check monitor s "color" from the menu "monochrome" is in black and white or monochrome image or other condition. Under VIDEO/HDMI status, Press to check. 3Open OSD and choose "function" to check if the color format is match with the video input format. Try to change the other formats 7.2 NO picture after put on the power 1 Check signal cable contact are in good condition, a monitor is synchronized with the input signal, and can press the "MODE" give it a try. 2Check signal cable connecting, and make sure use the standard adapter connect the monitor. If power supply by battery, please check the battery whether fully charged. 7.3 Images are not synchronized 1 Open OSD and choose "function" to check if the color format is match with the video input format. Try to change the other formats 7.4 No sound 1 Volume control did not open, can press the volume button "+", try increasing the volume. 2 Check the AUDIO input and ensure there have AUDIO signal Remark: If there are still other problems, please contact with our related deals. If there are changes without prior notice. 17