NAGRA VI Six-track digital recorder Swiss Made
Nagra next generation technology The best specs ever for pure audio quality Reliable technology The NAGRA VI has been designed for professional use as an affordable multi-track recorder of exceptional quality, not only in terms of the build quality but especially in terms of pure audio transparency. The use of high quality Neutrik XLR, Lemo and Hirose connectors, a large colour TFT screen married with a battery duration of over 12 hours continuous operation from a single charge (13.8 Ah optional pack) make it a tool that in-the-field recording engineers can rely upon. inputs, and they can be ganged in pairs if desired. The four in-house wound transformers offer fully floating inputs for the dynamic microphones, giving a greatly improved signal-tonoise ratio. The remaining two analogue inputs are LINE level inputs for connection to other equipment supplying a line level signal, such as radio receivers. When set to the LINE position, all 6 analogue inputs will accept up to +24 dbu. The two input connections (channels 5 + 6) double up as 2 AES inputs (A and B) when selected to digital input mode. The standard NAGRA VI package includes a protective carrying case and shoulder strap, stand-up supporting legs, carrying handles as well as a 4.6 Ah Lithium-ion power pack and mains power supply, and is equipped with a 120 GB hard disk that can be replaced by a Solid State Drive if desired. The VHDL concept of the NAGRA VI allows even hardware to be adapted through software, and the machine software is downloadable from our web site, and will update automatically in less than 20 seconds. Six audio inputs The NAGRA VI offers six independent analogue audio inputs. Inputs 1 to 4 are equipped with traditional NAGRA microphone pre-amplifiers for dynamic and phantom +48 V microphones. These totally new concept input circuits and pre-amplifers are a combination of those developed for the NAGRA V and NAGRA D and, without doubt, offer the highest specifications and purest audio quality NAGRA has ever developed. An audio limiter can be selected for each of the microphone Multiple powering possibilities The Nagra VI power supply accepts 100-240 V, 50-60 Hz, mains powering. The standard 4.6 Ah Lithium-Ion battery pack can be recharged in approximately 3 hours offering around 5 hours operation. External DC from 9-16 V can also be connected to the 4 pole XLR. Two Hirose connectors can supply up to 1 A to power external accessories from the machine supply. This enables external devices such as radio microphone receivers or external hard drives to be used in-the-field without their individual powering. Nagra is one of the most recognised brands in the world with, among other awards, three Oscars and one Emmy
A powerful software driven machine Offering the finest in ergonomics Main display screen: shows status, levels and menus of the recorder Mixer with pan Directory Potentiometers assignment Easy use on-the-run Layout of the NAGRA VI is both logical and accessible. All machine controls are located on the front panel and can be easily accessed on-the-run. The powerful menu system is grouped in a practical manner and any position can be instantly located via the programmable user keys. Menus give access to additional user adapted features such as the built-in mixer with pan controls, the recording media testing programme, potentiometer assignment menu or time code and ixml metadata screens. A fool-proof copy manager allows not only back-up of current recordings but also the copying of files and folders transparently, even while recording. All copy functions occur in the background and will also take into account modifications to the metadata, which can be changed while recording or even after the event. An external USB keyboard can be connected to the recorder giving easy data entry and transport control features. An optional second USB port can be installed if the primary host port is already used for an external USB device. The drift due to temperature changes is less than 0.28 ppm. This is the most accurate crystal ever used in an NAGRA recorder. The NAGRA VI will handle all the standard SMPTE/ EBU frame rates as well as the 23.976 fps rate for the HD format. All the frame rates can be pulled up/down for the NTSC markets. Intuitive software navigation The set-up and control of the parameters are ergonomically programmed using a simple system of intuitive menus and the 3½" TFT display. These menus can be selected as desired, and all parameters of the machine can be stored in the six available user-editable templates. Environment friendly All NAGRA recorders meet the stringent RoHS (anti lead) requirements as well as the CE norms. Certification of both is available upon request. The most accurate crystal for drift-free time code The internal time code system and all the internal digital electronics of the NAGRA VI are clocked by a Stratum III TCXO crystal, which has been artificially aged in an oven to maintain stability. This crystal gives a guaranteed overall Input choice Media speed test stability better than ±4.6 ppm over a period of 15 years throughout a temperature range from -20 C to +70 C. Supplied with the Nagra VI: robust weather resistant carrying case, battery pack, power supply, carrying handles and easily attached supporting legs
A superbly-built recorder with extended features A tool that in-the-field engineers can rely upon 17 19 20 18 3 4 6 9 10 11 12 13 32 27 28 29 33 1 2 5 7 8 14 15 16 34 30 31 21 22 23 24 25 26 35 36 37 38 39 40 1 Display screen 3½" TFT screen. Wide viewing angle, sunlight readable, usable under a wide temperature range. 2 Menu navigation keys Access, navigation and execution of the menus 3 User programmable keys Give rapid access to different menu positions 4 Warning LED Indicates different errors by various blanking combinations 5 Programmable potentiometers Each potentiometer can be assigned to one or more microphone or line inputs or fader controls 6 LED level indicators Menu programmable thresholds 7 Marker keys To add a maker during playback or record 8 Transport keys The same functions as a CD player: forward, rewind, skip 9 Built-in loudspeaker 10 Reference generator Activates the menu programmable reference generator 11 Built-in loudspeaker 12 Slate microphone 13 Monitoring matrix 14 Main function selector 15 Headphone jack and level adjustment 16 Supplied carrying and protecting handles 17 Power converter board Generates 15 different voltages for the recorder via ultra-low noise converters and regulators 18 Special screening Separates the sensitive audio circuitry and the power & digital circuits 19 Shielded hard disk 20 Digital board 21 Analogue and digital input connection panel 22 Audio circuit 23 In-house wound dynamic transformers 24 High performance low power consumption A/D converters 25 Output connection panel 26 Compact flash interface 27 External DC input 4-pole XLR 9-16 V, 3.3 A 28 Hirose DC output connectors 2x 12 Vdc, 500 ma DC 29 Time code IN/OUT 5-pin Lemo 30 Microphone / Line Input XLR connectors 31 Line/Digital input XLR connectors 32 Li-Ion detachable battery compartment 33 Analogue line output XLR connectors 34 AES output XLR connector 35 9-pole "D-type" extension connector For AES out, word clock and video reference 36 USB keyboard connector 37 USB host/device connectors 38 Compact flash slot 39 Remote start/stop connection 40 Second headphone jack
technicalspecifications Recording Data storage medium 120 GB internal hard disk Removable media Compact Flash type I/II (hot swappable) Disk format FAT 16/32 Recording method Linear digital PCM File type 16/24-bit Broadcast Wave File BWF (WAV) with ixml, AES 31 compatible A/D & D/A conversion 24-bit Sigma-Delta Tracks 6 individual Sampling rate 44.1, 48 khz, 88.2 and 96 khz (with 0.1% pull up/down) Recording capacity 20 min of 6 track per GB of disk/memory @ 24-bit 48 khz Mono/polyphonic Selectable Pre-recording buffer Up to 20 seconds @ 48 khz 24-bit on 6 tracks Display 3½" colour LCD TFT anti reflection/sunlight-readable Level meters On colour display and by LED for microphone inputs Inputs Inputs Digital inputs 2 XLR AES-3 shared with analogue inputs 5+6 Analogue inputs 4 symmetrical XLR microphone (dynamic, +48 V phantom)/line Microphone input sensitivity 2.8 and 10 mv/pa selectable Limiters Selectable on microphone inputs, individual or in pairs. Active at -8 dbfs, max +36 db for -2 dbfs Line input sensitivity Adjustable from -6 up to +24 dbu for 0 dbfs recording THD at 1 khz <0.1% microphone, <0.01% line (measured on AES out) Frequency response Microphone 20Hz - 43 khz +0.5/-1 db, line ±0.2 db (measured on AES out) Input noise (condenser mic) 0.9 µv (-119 dbu) Input noise (dynamic mic) 4 db measured ASA «A» loaded 200 Ω Signal-to-noise ratio >114 db Input level adj. range Microphone 60 dbu, line from -6 to +24 dbu Input filters LFA (with vortex filtering) Slate microphone Electret behind the front panel Outputs Analogue line output 2 XLR 4.4 V max (+15 dbu) Digital output XLR AES-3 (24-bit or 16-bit dithered) Headphones 2 stereo 6.3 mm (¼"), jack 50 Ω Internal speaker 1W Other USB host USB 2.0 connector type "A" USB device USB 2.0 connector type "B" Time code IN/OUT 5 pin LEMO (SMPTE/EBU) M/S decoder Two menu selectable Word clock 9-pole "D" type connector Dither Menu selectable 24/16-bits on inputs and/or outputs Nagra is continually improving its products and technologies; as a result, the above specifications may be modified without notice / Desrochers Communication / PRINTED IN SWITZERLAND 11.2009, P/N 2032001141 General Dimensions Weight Power supply 320 x 74 x 285 mm (W x H x D), including battery box 3 kg (6.6 lbs), without battery box Main supply 100-240 V, 50-60 Hz or 4.6 Ah Lithium-Ion battery box or external 9-16V (XLR 4 pole) Approximately 10W 3 hours (with supplied Lithium-Ion pack) Power consumption Charge time External power out 2 Hirose 12V (max 1A) Relative humidity From 10 to 99% (non condensing) Nagra is a division of the Kudelski Group, 1033 Cheseaux-sur-Lausanne, Switzerland, e-mail: audio_pro@nagra.com www.nagraaudio.com